Formation of BixSey Phases Upon Annealing of the Topological Insulator Bi2Se3: Stabilization of In-Depth Bismuth Bilayers.

The goal of this work is to study transformations that occur upon heating Bi2Se3 to temperatures up to 623 K. X-ray diffraction (XRD) and scanning tunneling microscopy (STM) and spectroscopy (STS) techniques were used in our investigation. XRD was measured following the 00L and 01L truncation rods. These measurements revealed that upon heating there is a coexistence of a major Bi2Se3 phase and other ones that present structures of quintuple-layers intercalated with Bismuth bilayers. STM measurements of the surface of this material showed the presence of large hexagonal BixSey domains embedded in a Bi2Se3 matrix. STS experiments were employed to map the local electronic density of states and characterize the modifications imposed by the presence of the additional phases. Finally, density functional theory (DFT) calculations were performed to support these findings.

Role of antiferromagnetic ordering in the (1×2) surface reconstruction of Ca(Fe(1-x)Co(x))2As2.

Low energy electron diffraction, scanning tunneling microscopy and spectroscopy, and first-principles spin-dependent density functional theory are utilized to investigate the geometric, electronic, and magnetic structures of the stripe-ordered (1×2) surface of Ca(Fe1-xCox)2As2 (x=0, 0.075). The surface is terminated with a 50% Ca layer. Compared to the bulk, the surface Ca layer has a large inward relaxation (∼0.5 Å), and the underneath As-Fe2-As layer displays a significant buckling. First-principles calculations show that the (1×2) phase is stabilized by the bulk antiferromagnetic spin ordering through the spin-charge-lattice coupling. Strikingly, a superconducting gap (∼7 meV at 7.4 K) is observed to spatially coexist with the (1×2) phase (x=0.075 compound). This implies the coexistence of both superconductivity and AFM ordering at the surface.

Analysis of survival after primary liver transplantation: multivariate analysis of 155 cases in a single center.

Liver transplantation is known as a highly complex procedure. Several variables can affect the outcome. The present study is a retrospective multivariate analysis of the outcomes of primary liver transplant recipients from deceased donors. From November 2006 through January 2009, 155 patients received first liver transplants from deceased donors. The data included the following: age of the recipient, gender of the recipient, ABO type, indication for the transplantation, model for end-stage liver disease (MELD) score, operative time, donor age, gender of the donor, cold ischemia time, and quantity of transfused blood products-red blood cells (PRBC), red blood cells recovered during the operation (cell saver), platelets, and fresh frozen plasma. Statistical analysis was done using SPSS 17 software. Cox regression analysis was performed to identify significant variables. ROC (receiver operating characteristic) curve was applied for those significant factors. Among all variables, only PRBC transfusion and MELD score showed statistical significance. For PRBC the increment of death risk was 17.08%, and for MELD score it was 3.83%. Patients that had to use PRBC and higher MELD scores had worse survivals. We concluded that the requirement for red blood cell transfusions and MELD showed the most significant influences on the outcomes of adult liver transplantations from deceased donors.

Surface geometric and electronic structures of BaFe2As2(001).

BaFe2As2 exhibits properties that are characteristic of the parent compounds of the newly discovered iron (Fe)-based high-T(C) superconductors. By combining real-space imaging of scanning tunneling microscopy and spectroscopy (STM+STS) with momentum-space quantitative low-energy electron diffraction (LEED), we have identified the surface plane of cleaved BaFe2As2 crystals as the As terminated Fe-As layer-the plane where superconductivity occurs. LEED and STM+STS data on the BaFe2As2(001) surface indicate an ordered arsenic (As) terminated metallic surface without reconstruction or lattice distortion. It is surprising that STM images the different Fe-As orbitals associated with the orthorhombic structure, but not the As atoms in the surface plane.

Chronic obstructive pulmonary disease is associated with osteoporosis and low levels of vitamin D.

UNLABELLED: We did a cross-sectional analysis of chronic pulmonary obstructive disease (COPD) patients without chronic use of systemic glucocorticoids (CUG). Osteoporosis was found in 51% and bone mineral density (BMD) was correlated with severity of disease. Low levels of vitamin D were found in 94%. All COPD patients may benefit from vitamin D supplementation and screening for low BMD. INTRODUCTION: Patients with chronic pulmonary obstructive disease have low bone mineral density, caused by chronic use of systemic glucocorticoids and hypovitaminosis D. However, patients without CUG may also have low BMD. METHODS: We performed a cross-sectional analysis in 49 patients (21 men, 28 postmenopausal women), with COPD without CUG, from Brazil (25 degrees 25' S). Several markers of bone metabolism were measured, plus BMD. Osteoporosis risk factors and history of fractures were investigated. Respiratory function was assessed by venous gasometry, spirometry, and oximetry. BMD results were compared to those of 40 healthy non-smokers controls. RESULTS: COPD patients had lower BMD at all sites (p < 0.01). Osteoporosis was observed in 51%. BMD independently correlated with stage of disease (lumbar spine, R = 0.38, p = 0.01; total femur, R = 0.36, p = 0.01; femoral neck, R = 0.40, p < 0.01). Ninety-four percent had low levels of vitamin D (<30 ng/mL) and 67% had secondary hyperparathyroidism. Vitamin D was correlated with oxygen saturation (R = 0.36, p = 0.01), with lower levels in those with saturation <88% (p = 0.01). CONCLUSION: Patients with COPD without CUG have increased risk for osteoporosis. Such patients have hypovitaminosis D, which is correlated with the severity of disease. Screening for low BMD and vitamin D supplementation may be warranted to all COPD patients.

Surface-stabilized nonferromagnetic ordering of a layered ferromagnetic manganite.

An outstanding question regarding the probing or possible device applications of correlated electronic materials (CEMs) with layered structure is the extent to which their bulk and surface properties differ or not. The broken translational symmetry at the surface can lead to distinct functionality due to the charge, lattice, orbital, and spin coupling. Here we report on the case of bilayered manganites with hole doping levels corresponding to bulk ferromagnetic order. We find that, although the hole doping level is measured to be the same as in the bulk, the surface layer is not ferromagnetic. Further, our low-energy electron diffraction and x-ray measurements show that there is a c-axis collapse in the outermost layer. Bulk theoretical calculations reveal that, even at fixed doping level, the relaxation of the Jahn-Teller distortion at the surface is consistent with the stabilization of an A-type antiferromagnetic state.

Manifestations of broken symmetry: the surface phases of Ca(2-x)SrxRuO4.

The surface structural phases of Ca(2-x)SrxRuO4 are investigated using quantitative low energy electron diffraction. The broken symmetry at the surface enhances the structural instability against the RuO6 rotational distortion while diminishing the instability against the RuO6 tilt distortion occurring within the bulk crystal. As a result, suppressed structural and electronic surface phase transition temperatures are observed, including the appearance of an inherent Mott metal-to-insulator transition for x=0.1 and possible modifications of the surface quantum critical point near x(c) approximately 0.5.

A surface-tailored, purely electronic, mott metal-to-insulator transition.

Mott transitions, which are metal-insulator transitions (MITs) driven by electron-electron interactions, are usually accompanied in bulk by structural phase transitions. In the layered perovskite Ca(1.9)Sr(0.1)RuO4, such a first-order Mott MIT occurs in the bulk at a temperature of 154 kelvin on cooling. In contrast, at the surface, an unusual inherent Mott MIT is observed at 130 kelvin, also on cooling but without a simultaneous lattice distortion. The broken translational symmetry at the surface causes a compressional stress that results in a 150% increase in the buckling of the Ca/Sr-O surface plane as compared to the bulk. The Ca/Sr ions are pulled toward the bulk, which stabilizes a phase more amenable to a Mott insulator ground state than does the bulk structure and also energetically prohibits the structural transition that accompanies the bulk MIT.

Screen-printed tyrosinase-containing electrodes for the biosensing of enzyme inhibitors.

Disposable amperometric inhibition biosensors have been microfabricated by screen printing a tyrosinase-containing carbon ink. The decrease in the substrate (catechol) steady-state current, caused by the addition of various pesticides and herbicides, offers convenient quantitation of micromolar levels of these pollutants. Unlike esterasebased disposable strips, the tyrosinase thick-film devices can be fabricated by incorporating the enzyme within the carbon ink. and do not require a prolonged incubation step in the presence of the inhibitor. The effect of experimental variables, such as the enzyme loading or substrate concentration, is assessed. Applicability to an untreated river water sample is illustrated. Such use of single-use devices for monitoring toxins addresses the problem of irreversible enzyme inhibition, and holds great promise for on-site field analysis.

Thick film voltammetric sensors for trace copper based on a cation-exchanger-modified surface.

Strip-type, preconcentrating/voltammetric sensors, prepared by incorporating a cation-exchange resin within screen-printed carbon inks, are described. Such single-use strips combine the efficient electrostatic accumulation of heavy metals with the use of "mercury-free" surfaces. The uptake of copper(II) from dilute solutions (under open circuit conditions) is followed by voltammetric measurements in a separate blank solution. Various experimental variables have been optimized to yield low detection limits (e.g. 0.5 mug 1(-1) with 10 min accumulation) and good reproducibility (relative standard deviation, 2%). The applicability to assays of drinking water is demonstrated.