Frequency dependence of surface acoustic wave swimming.

Surface acoustic waves (SAWs) are elastic waves that can be excited directly on the surface of piezoelectric crystals using a transducer, leading to their exploitation for numerous technological applications, including for example microfluidics. Recently, the concept of SAW streaming, which underpins SAW microfluidics, was extended to make the first experimental demonstration of 'SAW swimming', where instead of moving water droplets on the surface of a device, SAWs are used as a propulsion mechanism. Using theoretical analysis and experiments, we show that the SAW swimming force can be controlled directly by changing the SAW frequency, due to attenuation and changing force distributions within each SAW streaming jet. Additionally, an optimum frequency exists which generates a maximum SAW swimming force. The SAW frequency can therefore be used to control the efficiency and forward force of these SAW swimming devices. The SAW swimming propulsion mechanism also mimics that used by many microorganisms, where propulsion is produced by a cyclic distortion of the body shape. This improved understanding of SAW swimming provides a test-bed for exploring the science of microorganism swimming, and could bring new insight to the evolutionary significance for the length and beating frequency of swimming microbial flagella.

Gate tunable graphene-integrated metasurface modulator for mid-infrared beam steering.

The ability to integrate graphene into metasurface devices has attracted enormous interest as a means of achieving dynamic electrical control of their electromagnetic response. In this manuscript, we experimentally demonstrate a graphene-integrated metasurface modulator that establishes the potential to actively control the amplitude and phase of mid-infrared light with high modulation depth and speed, in good agreement with simulation results. Our simulations also show it is possible to construct a reconfigurable surface with tunable phase profile by incorporating graphene-integrated metasurface modulators with specific geometric parameters. This reconfigurable surface is able to manipulate the orientation of the wave reflected from it, achieving a high-speed, switchable beam steering reflective interface. The results here could inspire research on dynamic reflective display and holograms.

Zeta potentials of the rare earth element fluorcarbonate minerals focusing on bastnäsite and parisite.

Rare earth elements (REE) are critical to a wide range of technologies ranging from mobile phones to wind turbines. Processing and extraction of REE minerals from ore bodies is, however, both challenging and relatively poorly understood, as the majority of deposits contain only limited enrichment of REEs. An improved understanding of the surface properties of the minerals is important in informing and optimising their processing, in particular for separation by froth flotation. The measurement of zeta potential can be used to extract information regarding the electrical double layer, and hence surface properties of these minerals. There are over 34 REE fluorcarbonate minerals currently identified, however bastnäsite, synchysite and parisite are of most economic importance. Bastnäsite-(Ce), the most common REE fluorcarbonate, supplies over 50% of the world's REE. Previous studies of bastnäsite have showed a wide range of surface behaviour, with the iso-electric point (IEP), being measured between pH values of 4.6 and 9.3. In contrast, no values of IEP have been reported for parisite or synchysite. In this work, we review previous studies of the zeta potentials of bastnäsite to investigate the effects of different methodologies and sample preparation. In addition, measurements of zeta potentials of parisite under water, collector and supernatant conditions were conducted, the first to be reported. These results showed an iso-electric point for parisite of 5.6 under water, with a shift to a more negative zeta potential with both collector (hydroxamic and fatty acids) and supernatant conditions. The IEP with collectors and supernatant was <3.5. As zeta potential measurements in the presence of reagents and supernatants are the most rigorous way of determining the efficiency of a flotation reagent, the agreement between parisite zeta potentials obtained here and previous work on bastnäsite suggests that parisite may be processed using similar reagent schemes to bastnäsite. This is important for future processing of REE deposits, comprising of more complex REE mineralogy.

A highly attenuating and frequency tailorable annular hole phononic crystal for surface acoustic waves.

Surface acoustic wave (SAW) devices are widely used for signal processing, sensing and increasingly for lab-on-a-chip applications. Phononic crystals can control the propagation of SAW, analogous to photonic crystals, enabling components such as waveguides and cavities. Here we present an approach for the realisation of robust, tailorable SAW phononic crystals, based on annular holes patterned in a SAW substrate. Using simulations and experiments, we show that this geometry supports local resonances which create highly attenuating phononic bandgaps at frequencies with negligible coupling of SAWs into other modes, even for relatively shallow features. The enormous bandgap attenuation is up to an order-of-magnitude larger than that achieved with a pillar phononic crystal of the same size, enabling effective phononic crystals to be made up of smaller numbers of elements. This work transforms the ability to exploit phononic crystals for developing novel SAW device concepts, mirroring contemporary progress in photonic crystals.The control and manipulation of propagating sound waves on a surface has applications in on-chip signal processing and sensing. Here, Ash et al. deviate from standard designs and fabricate frequency tailorable phononic crystals with an order-of-magnitude increase in attenuation.

Acoustoelectric Current in Graphene Nanoribbons.

Surface acoustic waves (SAWs) propagating on piezoelectric substrates offer a convenient, contactless approach to probing the electronic properties of low-dimensional charge carrier systems such as graphene nanoribbons (GNRs). SAWs can also be used to transport and manipulate charge for applications such as metrology and quantum information. In this work, we investigate the acoustoelectric effect in GNRs, and show that an acoustoelectric current can be generated in GNRs with physical widths as small as 200 nm at room temperature. The positive current in the direction of the SAWs, which corresponds to the transportation of holes, exhibits a linear dependence on SAW intensity and frequency. This is consistent with the description of the interaction between the charge carriers in the GNRs and the piezoelectric fields associated with the SAWs being described by a relatively simple classical relaxation model. Somewhat counter-intuitively, as the GNR width is decreased, the measured acoustoelectric current increases. This is thought to be caused by an increase of the carrier mobility due to increased doping arising from damage to the GNR edges.

Broadband and efficient plasmonic control in the near-infrared and visible via strong interference of surface plasmon polaritons.

Broadband and tunable control of surface plasmon polaritons in the near-infrared and visible spectrum is demonstrated theoretically and numerically with a pair of phased nanoslits. We establish, with simulations supported by a coupled wave model, that by dividing the incident power equally between two input channels, the maximum plasmon intensity deliverable to either side of the nanoslit pair is twice that for an isolated slit. For a broadband source, a compact device with nanoslit separation of the order of a tenth of the wavelength is shown to steer nearly all the generated plasmons to one side for the same phase delay, thereby achieving a broadband unidirectional plasmon launcher. The reported effect can be applied to the design of ultra-broadband and efficient tunable plasmonic devices.