Platinum diimine-dithiolate complexes as a new class of photoconducting compounds for pristine photodetectors: case study on [Pt(bipy)(Naph-edt)] (bipy = 2,2'-bipyridine; Naph-edt2- = 2-naphthylethylene-1,2-dithiolate).

The photoconducting properties of platinum diimine-dithiolate complex [Pt(bipy)(Naph-edt)] (1; bipy = 2,2'-bipyridine; Naph-edt2- = 2-naphthylethylene-1,2-dithiolate) were investigated. DFT calculations on a model assembly with four complex units suggest that the high external quantum efficency measured on a prototype photodetector correlates with the intermolecular character of electronic excitations in the visible region.

Organic Electronics Picks Up the Pace: Mask-Less, Solution Processed Organic Transistors Operating at 160 MHz.

Organic printed electronics has proven its potential as an essential enabler for applications related to healthcare, entertainment, energy, and distributed intelligent objects. The possibility of exploiting solution-based and direct-writing production schemes further boosts the benefits offered by such technology, facilitating the implementation of cheap, conformable, bio-compatible electronic applications. The result shown in this work challenges the widespread assumption that such class of electronic devices is relegated to low-frequency operation, owing to the limited charge mobility of the materials and to the low spatial resolution achievable with conventional printing techniques. Here, it is shown that solution-processed and direct-written organic field-effect transistors can be carefully designed and fabricated so to achieve a maximum transition frequency of 160 MHz, unlocking an operational range that was not available before for organics. Such range was believed to be only accessible with more performing classes of semiconductor materials and/or more expensive fabrication schemes. The present achievement opens a route for cost- and energy-efficient manufacturability of flexible and conformable electronics with wireless-communication capabilities.

Photo-electrical properties of 2D quantum confined metal-organic chalcogenide nanocrystal films.

Hybrid quantum wells are electronic structures where charge carriers are confined along stacked inorganic planes, separated by insulating organic moieties. 2D quantum-confined hybrid materials are of great interest from a solid-state physics standpoint because of the rich many-body phenomena they host, their tunability and easy synthesis, allowing the creation of material libraries. In addition, from a technological point of view, 2D hybrids are promising candidates for efficient, tunable, low-cost materials impacting a broad range of optoelectronic devices. Different approaches and materials have, therefore, been investigated, with the notable example of 2D metal halide hybrid perovskites. Despite the remarkable properties of such materials, the presence of toxic elements like lead is not desirable in applications and their ionic lattices may represent a limiting factor for stability under operating conditions. Therefore, non-ionic 2D materials made with non-toxic elements are preferable. In order to expand the library of possible hybrid quantum well materials, herein, we consider an alternative platform based on non-toxic, self-assembled, metal-organic chalcogenides. While the optical properties have been recently explored and some unique excitonic characters highlighted, photo-generation of carriers and their transport in these lamellar inorganic/organic nanostructures and critical optoelectronic aspects remain totally unexplored. We hereby report the first investigation on the electrical properties of the air-stable [AgSePh]∞ 2D coordination polymer in the form of nanocrystal (NC) films readily synthesized in situ and at low temperature, compatible with flexible plastic substrates. The wavelength-dependent photo-response of the NC films suggests the possible use of this material as a near-UV photodetector. We therefore built a lateral photo-detector, achieving a sensitivity of 0.8 A W-1 at 370 nm, thanks to a photoconduction mechanism, and a cut-off frequency of ∼400 Hz, and validated its reliability as an air-stable UV detector on flexible substrates.

A 13.56 MHz Rectifier Based on Fully Inkjet Printed Organic Diodes.

The increasing diffusion of portable and wearable technologies results in a growing interest in electronic devices having features such as flexibility, lightness-in-weight, transparency, and wireless operation. Organic electronics is proposed as a potential candidate to fulfill such needs, in particular targeting pervasive radio-frequency (RF) applications. Still, limitations in terms of device performances at RF, particularly severe when large-area and scalable fabrication techniques are employed, have largely precluded the achievement of such an appealing scenario. In this work, the rectification of an electromagnetic wave at 13.56 MHz with a fully inkjet printed polymer diode is demonstrated. The rectifier, a key enabling component of future pervasive wireless systems, is fabricated through scalable large-area methods on plastic. To provide a proof-of-principle demonstration of its future applicability, its adoption in powering a printed integrated polymer circuit is presented. The possibility of harvesting electrical power from RF waves and delivering it to a cheap flexible substrate through a simple printed circuitry paves the way to a plethora of appealing distributed electronic applications.

Photoconducting Devices with Response in the Visible-Near-Infrared Region Based on Neutral Ni Complexes of Aryl-1,2-dithiolene Ligands.

Metal bis(1,2-dithiolene) complexes belonging to the class [Ni(Ar-edt)2]x- [Ar-edt2- = arylethylene-1,2-dithiolate; Ar = phenyl, (1x-), 2-naphthyl (2x-); x = 0 and 1] were fully characterized by NMR, UV-visible-near-infrared (UV-vis-NIR), diffuse reflectance, and FT-IR spectroscopy, as well as cyclic voltammetry and single-crystal X-ray diffraction analysis. These complexes have emerged as new photoconducting materials that allowed for the development of a prototype of photodetectors with response in the vis-NIR region. The photodetecting devices showed in some cases quantum efficiencies orders of magnitude higher than those of previously reported 1,2-dithiolene systems.

Reproducible, High Performance Fully Printed Photodiodes on Flexible Substrates through the Use of a Polyethylenimine Interlayer.

This paper investigates with a statistical analysis the issue of performance reproducibility and optimization in fully inkjet-printed organic photodetectors on flexible substrates. The most crucial process step to obtain reproducible, well performing devices with a high process yield turns out to be the printing of the thin polyethylenimine interlayer used as a surface modifier for the bottom electrode. Controlling solution composition and deposition parameters for this layer, a 57 nA cm-2 mean reverse dark current was achieved, with an outstanding standard deviation as low as 15 nA cm-2, with dramatic improvements in process yield (from less than 20% to over 90%). Device performance in terms of dark currents, EQE (from 50% up to 90% at 525 nm, depending on process), and rectification (ratio between forward current and reverse current over 104 and reaching 105 in the best cases) is among the best for fully printed detectors. Furthermore, the importance of relative humidity control in the deposition environment during the interlayer printing on device characteristics is reported, indicating the processing conditions optimal for scaling to mass manufacturing. The overall interlayer optimization approach was applied to a process using widely adopted materials in the organic optoelectronics field, and thus retains relevance on a broad range.

Simultaneous Extraction of Density of States Width, Carrier Mobility and Injection Barriers in Organic Semiconductors.

The predictive accuracy of state-of-the-art continuum models for charge transport in organic semiconductors is highly dependent on the accurate tuning of a set of parameters whose values cannot be effectively estimated either by direct measurements or by first principles. Fitting the complete set of model parameters at once to experimental data requires to set up extremely complex multi-objective optimization problems whose solution is, on the one hand, overwhelmingly computationally expensive and, on the other, it provides no guarantee of the physical soundness of the value obtained for each individual parameter. In the present study we present a step-by-step procedure that enables to determine the most relevant model parameters, namely the density of states width, the carrier mobility and the injection barrier height, by fitting experimental data from a sequence of relatively simple and inexpensive measurements to suitably devised numerical simulations. At each step of the proposed procedure only one parameter value is sought for, thus highly simplifying the numerical fitting and enhancing its robustness, reliability and accuracy. As a case study we consider a prototypical n-type organic polymer. A very satisfactory fitting of experimental measurements is obtained, and physically meaningful values for the aforementioned parameters are extracted.

Zinc selenide-based large aperture photo-controlled deformable mirror.

Realization of large aperture deformable mirrors with a large density of actuators is important in many applications, and photo-controlled deformable mirrors (PCDMs) represent an innovation. Herein we show that PCDMs are scalable realizing a 2-inch aperture device based on a polycrystalline zinc selenide (ZnSe) as the photoconductive substrate and a thin polymeric reflective membrane. ZnSe is electrically characterized and analyzed through a model that we previously introduced. The PCDM is then optically tested, demonstrating its capabilities in adaptive optics.

All-organic and fully-printed semitransparent photodetectors based on narrow bandgap conjugated molecules.

All-organic, fully-printed and semitransparent photodetectors with a broad wavelength band response, based on a ternary blend comprising narrow band-gap small molecules, are demonstrated. The ternary blend with a semiconducting polymer allows for the optimal printing of small molecules, suppressing strong phase segregation, and uncontrolled crystallization. The insertion of a suitable interlayer enables the adoption of polymer, transparent, top and bottom printed electrodes, thus making light detection possible from both device sides.

Integration of an organic photodetector onto a plastic optical fiber by means of spray coating technique.

A working prototype of integrated fiber/receiver system for optical data transmission is realized. The prototype is made by directly depositing an organic photodetector onto a plastic optical fiber. For the deposition of the organic layers, spray coating is successfully exploited. Operation over four orders of magnitude range of light intensities as well as photoresponse to pulsed stimulation are demonstrated.

Organic light detectors: photodiodes and phototransistors.

While organic electronics is mostly dominated by light-emitting diodes, photovoltaic cells and transistors, optoelectronics properties peculiar to organic semiconductors make them interesting candidates for the development of innovative and disruptive applications also in the field of light signal detection. In fact, organic-based photoactive media combine effective light absorption in the region of the spectrum from ultraviolet to near-infrared with good photogeneration yield and low-temperature processability over large areas and on virtually every substrate, which might enable innovative optoelectronic systems to be targeted for instance in the field of imaging, optical communications or biomedical sensing. In this review, after a brief resume of photogeneration basics and of devices operation mechanisms, we offer a broad overview of recent progress in the field, focusing on photodiodes and phototransistors. As to the former device category, very interesting values for figures of merit such as photoconversion efficiency, speed and minimum detectable signal level have been attained, and even though the simultaneous optimization of all these relevant parameters is demonstrated in a limited number of papers, real applications are within reach for this technology, as it is testified by the increasing number of realizations going beyond the single-device level and tackling more complex optoelectronic systems. As to phototransistors, a more recent subject of study in the framework of organic electronics, despite a broad distribution in the reported performances, best photoresponsivities outperform amorphous silicon-based devices. This suggests that organic phototransistors have a large potential to be used in a variety of optoelectronic peculiar applications, such as a photo-sensor, opto-isolator, image sensor, optically controlled phase shifter, and opto-electronic switch and memory.

Charge injection in solution-processed organic field-effect transistors: physics, models and characterization methods.

A high-mobility organic semiconductor employed as the active material in a field-effect transistor does not guarantee per se that expectations of high performance are fulfilled. This is even truer if a downscaled, short channel is adopted. Only if contacts are able to provide the device with as much charge as it needs, with a negligible voltage drop across them, then high expectations can turn into high performances. It is a fact that this is not always the case in the field of organic electronics. In this review, we aim to offer a comprehensive overview on the subject of current injection in organic thin film transistors: physical principles concerning energy level (mis)alignment at interfaces, models describing charge injection, technologies for interface tuning, and techniques for characterizing devices. Finally, a survey of the most recent accomplishments in the field is given. Principles are described in general, but the technologies and survey emphasis is on solution processed transistors, because it is our opinion that scalable, roll-to-roll printing processing is one, if not the brightest, possible scenario for the future of organic electronics. With the exception of electrolyte-gated organic transistors, where impressively low width normalized resistances were reported (in the range of 10 Ω·cm), to date the lowest values reported for devices where the semiconductor is solution-processed and where the most common architectures are adopted, are ∼10 kΩ·cm for transistors with a field effect mobility in the 0.1-1 cm(2)/Vs range. Although these values represent the best case, they still pose a severe limitation for downscaling the channel lengths below a few micrometers, necessary for increasing the device switching speed. Moreover, techniques to lower contact resistances have been often developed on a case-by-case basis, depending on the materials, architecture and processing techniques. The lack of a standard strategy has hampered the progress of the field for a long time. Only recently, as the understanding of the rather complex physical processes at the metal/semiconductor interfaces has improved, more general approaches, with a validity that extends to several materials, are being proposed and successfully tested in the literature. Only a combined scientific and technological effort, on the one side to fully understand contact phenomena and on the other to completely master the tailoring of interfaces, will enable the development of advanced organic electronics applications and their widespread adoption in low-cost, large-area printed circuits.

Monoreduced [M(R,R'timdt)2]- dithiolenes (M = Ni, Pd, Pt; R,R'timdt = disubstituted imidazolidine-2,4,5-trithione): solid state photoconducting properties in the third optical fiber window.

Electrochemically monoreduced [M(R,R'timdt)(2)](-) dithiolenes, showing unprecedented wavelength selective photoconducting properties in the third optical fiber window (1500-1800 nm), fine-tunable through modifications in the chemical structure, allowed for the fabrication of a test photodetector with a bit rate of about 85 kbit s(-1).