Assessment of surrogate models for flood inundation: The physics-guided LSG model vs. state-of-the-art machine learning models.

Hydrodynamic models can accurately simulate flood inundation but are limited by their high computational demand that scales non-linearly with model complexity, resolution, and domain size. Therefore, it is often not feasible to use high-resolution hydrodynamic models for real-time flood predictions or when a large number of predictions are needed for probabilistic flood design. Computationally efficient surrogate models have been developed to address this issue. The recently developed Low-fidelity, Spatial analysis, and Gaussian Process Learning (LSG) model has shown strong performance in both computational efficiency and simulation accuracy. The LSG model is a physics-guided surrogate model that simulates flood inundation by first using an extremely coarse and simplified (i.e. low-fidelity) hydrodynamic model to provide an initial estimate of flood inundation. Then, the low-fidelity estimate is upskilled via Empirical Orthogonal Functions (EOF) analysis and Sparse Gaussian Process models to provide accurate high-resolution predictions. Despite the promising results achieved thus far, the LSG model has not been benchmarked against other surrogate models. Such a comparison is needed to fully understand the value of the LSG model and to provide guidance for future research efforts in flood inundation simulation. This study compares the LSG model to four state-of-the-art surrogate flood inundation models. The surrogate models are assessed for their ability to simulate the temporal and spatial evolution of flood inundation for events both within and beyond the range used for model training. The models are evaluated for three distinct case studies in Australia and the United Kingdom. The LSG model is found to be superior in accuracy for both flood extent and water depth, including when applied to flood events outside the range of training data used, while achieving high computational efficiency. In addition, the low-fidelity model is found to play a crucial role in achieving the overall superior performance of the LSG model.

Integrating climate model projections into environmental risk assessment: A probabilistic modeling approach.

The Society of Environmental Toxicology and Chemistry (SETAC) convened a Pellston workshop in 2022 to examine how information on climate change could be better incorporated into the ecological risk assessment (ERA) process for chemicals as well as other environmental stressors. A major impetus for this workshop is that climate change can affect components of ecological risks in multiple direct and indirect ways, including the use patterns and environmental exposure pathways of chemical stressors such as pesticides, the toxicity of chemicals in receiving environments, and the vulnerability of species of concern related to habitat quality and use. This article explores a modeling approach for integrating climate model projections into the assessment of near- and long-term ecological risks, developed in collaboration with climate scientists. State-of-the-art global climate modeling and downscaling techniques may enable climate projections at scales appropriate for the study area. It is, however, also important to realize the limitations of individual global climate models and make use of climate model ensembles represented by statistical properties. Here, we present a probabilistic modeling approach aiming to combine projected climatic variables as well as the associated uncertainties from climate model ensembles in conjunction with ERA pathways. We draw upon three examples of ERA that utilized Bayesian networks for this purpose and that also represent methodological advancements for better prediction of future risks to ecosystems. We envision that the modeling approach developed from this international collaboration will contribute to better assessment and management of risks from chemical stressors in a changing climate. Integr Environ Assess Manag 2024;20:367-383. © 2023 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Incorporation of climate change into a multiple stressor risk assessment for the Chinook salmon (Oncorhynchus tshawytscha) population in the Yakima River, Washington, USA.

One outcome of the 2022 Society of Environmental Toxicology and Chemistry Pellston Workshop on incorporating climate change predictions into ecological risk assessments was the key question of how to integrate ecological risk assessments that focus on contaminants with the environmental alterations from climate projections. This article summarizes the results of integrating selected direct and indirect effects of climate change into an existing Bayesian network previously used for ecological risk assessment. The existing Bayesian Network Relative Risk Model integrated the effects of two organophosphate pesticides (malathion and diazinon), water temperature, and dissolved oxygen levels on the Chinook salmon population in the Yakima River Basin (YRB), Washington, USA. The endpoint was defined as the entity, Yakima River metapopulation, and the attribute was defined as no decline to a subpopulation or the overall metapopulation. In this manner, we addressed the management objective of no net loss of Chinook salmon, an iconic and protected species. Climate change-induced changes in water quality parameters (temperature and dissolved oxygen levels) used models based on projected climatic conditions in the 2050s and 2080s by the use of a probabilistic model. Pesticide concentrations in the original model were modified assuming different scenarios of pest control strategies in the future, because climate change may alter pest numbers and species. Our results predict that future direct and indirect changes to the YRB will result in a greater probability that the salmon population will continue to fail to meet the management objective of no net loss. As indicated by the sensitivity analysis, the key driver in salmon population risk was found to be current and future changes in temperature and dissolved oxygen, with pesticide concentrations being not as important. Integr Environ Assess Manag 2024;20:419-432. © 2023 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Evaluating the effects of climate change and chemical, physical, and biological stressors on nearshore coral reefs: A case study in the Great Barrier Reef, Australia.

An understanding of the combined effects of climate change (CC) and other anthropogenic stressors, such as chemical exposures, is essential for improving ecological risk assessments of vulnerable ecosystems. In the Great Barrier Reef, coral reefs are under increasingly severe duress from increasing ocean temperatures, acidification, and cyclone intensities associated with CC. In addition to these stressors, inshore reef systems, such as the Mackay-Whitsunday coastal zone, are being impacted by other anthropogenic stressors, including chemical, nutrient, and sediment exposures related to more intense rainfall events that increase the catchment runoff of contaminated waters. To illustrate an approach for incorporating CC into ecological risk assessment frameworks, we developed an adverse outcome pathway network to conceptually delineate the effects of climate variables and photosystem II herbicide (diuron) exposures on scleractinian corals. This informed the development of a Bayesian network (BN) to quantitatively compare the effects of historical (1975-2005) and future projected climate on inshore hard coral bleaching, mortality, and cover. This BN demonstrated how risk may be predicted for multiple physical and biological stressors, including temperature, ocean acidification, cyclones, sediments, macroalgae competition, and crown of thorns starfish predation, as well as chemical stressors such as nitrogen and herbicides. Climate scenarios included an ensemble of 16 downscaled models encompassing current and future conditions based on multiple emission scenarios for two 30-year periods. It was found that both climate-related and catchment-related stressors pose a risk to these inshore reef systems, with projected increases in coral bleaching and coral mortality under all future climate scenarios. This modeling exercise can support the identification of risk drivers for the prioritization of management interventions to build future resilient reefs. Integr Environ Assess Manag 2024;20:401-418. © 2023 Norwegian Institute for Water Research and The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC). This article has been contributed to by U.S. Government employees and their work is in the public domain in the USA.

Incorporating climate projections in the environmental risk assessment of pesticides in aquatic ecosystems.

Global climate change will significantly impact the biodiversity of freshwater ecosystems, both directly and indirectly via the exacerbation of impacts from other stressors. Pesticides form a prime example of chemical stressors that are expected to synergize with climate change. Aquatic exposures to pesticides might change in magnitude due to increased runoff from agricultural fields, and in composition, as application patterns will change due to changes in pest pressures and crop types. Any prospective chemical risk assessment that aims to capture the influence of climate change should properly and comprehensively account for the variabilities and uncertainties that are inherent to projections of future climate. This is only feasible if they probabilistically propagate extensive ensembles of climate model projections. However, current prospective risk assessments typically make use of process-based models of chemical fate that do not typically allow for such high-throughput applications. Here, we describe a Bayesian network model that does. It incorporates a two-step univariate regression model based on a 30-day antecedent precipitation index, circumventing the need for computationally laborious mechanistic models. We show its feasibility and application potential in a case study with two pesticides in a Norwegian stream: the fungicide trifloxystrobin and herbicide clopyralid. Our analysis showed that variations in pesticide application rates as well as precipitation intensity lead to variations in in-stream exposures. When relating to aquatic risks, the influence of these processes is reduced and distributions of risk are dominated by effect-related parameters. Predicted risks for clopyralid were negligible, but the probability of unacceptable future environmental risks due to exposure to trifloxystrobin (i.e., a risk quotient >1) was 8%-12%. This percentage further increased to 30%-35% when a more conservative precautionary factor of 100 instead of 30 was used. Integr Environ Assess Manag 2024;20:384-400. © 2023 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Python program for spatial reduction and reconstruction method in flood inundation modelling.

Fast and accurate modelling of flood inundation has gained increasing attention in recent years. One approach gaining popularity recently is the development of emulation models using data driven methods, such as artificial neural networks. These emulation models are often developed to model flood depth for each grid cell in the modelling domain in order to maintain accurate spatial representation of the flood inundation surface. This leads to redundancy in modelling, as well as difficulties in achieving good model performance across floodplains where there are limited data available. In this paper, a spatial reduction and reconstruction (SRR) method is developed to (1) identify representative locations within the model domain where water levels can be used to represent flood inundation surface using deep learning models; and (2) reconstruct the flood inundation surface based on water levels simulated at these representative locations. The SRR method is part of the SRR-Deep-Learning framework for flood inundation modelling and therefore, it needs to be used together with data driven models. The SRR method is programmed using the Python programming language and is freely available from https://github.com/yuerongz/SRR-method.•The SRR method identifies locations which are representative of flood inundation behavior in surrounding areas.•The representative locations selected following the SRR method have sufficient flood data for developing emulation models.•Flood inundation surfaces can be reconstructed using the SRR method with a detection rate of above 99%.

Incorporating climate change in flood estimation guidance.

Research into potential implications of climate change on flood hazard has made significant progress over the past decade, yet efforts to translate this research into practical guidance for flood estimation remain in their infancy. In this commentary, we address the question: how best can practical flood guidance be modified to incorporate the additional uncertainty due to climate change? We begin by summarizing the physical causes of changes in flooding and then discuss common methods of design flood estimation in the context of uncertainty. We find that although climate science operates across aleatory, epistemic and deep uncertainty, engineering practitioners generally only address aleatory uncertainty associated with natural variability through standards-based approaches. A review of existing literature and flood guidance reveals that although research efforts in hydrology do not always reflect the methods used in flood estimation, significant progress has been made with many jurisdictions around the world now incorporating climate change in their flood guidance. We conclude that the deep uncertainty that climate change brings signals a need to shift towards more flexible design and planning approaches, and future research effort should focus on providing information that supports the range of flood estimation methods used in practice. This article is part of a discussion meeting issue 'Intensification of short-duration rainfall extremes and implications for flash flood risks'.

Informing Environmental Water Management Decisions: Using Conditional Probability Networks to Address the Information Needs of Planning and Implementation Cycles.

One important aspect of adaptive management is the clear and transparent documentation of hypotheses, together with the use of predictive models (complete with any assumptions) to test those hypotheses. Documentation of such models can improve the ability to learn from management decisions and supports dialog between stakeholders. A key challenge is how best to represent the existing scientific knowledge to support decision-making. Such challenges are currently emerging in the field of environmental water management in Australia, where managers are required to prioritize the delivery of environmental water on an annual basis, using a transparent and evidence-based decision framework. We argue that the development of models of ecological responses to environmental water use needs to support both the planning and implementation cycles of adaptive management. Here we demonstrate an approach based on the use of Conditional Probability Networks to translate existing ecological knowledge into quantitative models that include temporal dynamics to support adaptive environmental flow management. It equally extends to other applications where knowledge is incomplete, but decisions must still be made.