Midterm outcomes of total hip arthroplasty with a modular Birmingham head.

INTRODUCTION: Birmingham Hip Resurfacing (BHR) implants may be combined with a conventional femoral stem to create a modular metal-on-metal total hip arthroplasty (BHR MoM THA). There is little outcome data regarding this construct. This study examines midterm outcomes of BHR MoM THA compared to oxidised zirconium total hip arthroplasty (THA). METHODS: A retrospective institutional review identified all patients receiving BHR MoM THA between April 2005 and February 2011 and a matched control cohort of zirconium THA patients. Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), Harris Hip Score (HHS), and SF-12 Health status scores were obtained. Revisions and complications were collected from clinical records. Radiographs were assessed for evidence of component malposition, loosening, osteolysis, or heterotopic ossification. RESULTS: 63 modular BHR MoM THA were identified in 61 patients (36 with BHR cups, 27 with R3 cups) and 63 zirconium THA in 58 matched controls. Mean follow-up was 58 months. 14 BHR MoM THA hips (22.2%) were revised (4 infections, 1 dislocation, 9 soft tissue reactions) compared to 3 (4.8%) zirconium THA (all infections). At latest follow-up, 18.4% of surviving BHR MoM THA hips were painful compared to 0.5% of zirconium THA controls (p < 0.001). WOMAC, HHS, and SF-12 did not differ significantly between surviving members of the 2 groups. DISCUSSION: BHR MoM THA demonstrated a high revision rate, largely for adverse local soft tissue reaction and pain. Among those not revised, many reported some residual pain despite similar quality of life measures to those who received zirconium THA.

Radiostereometric analysis using clinical radiographic views: Validation with model-based radiostereometric analysis for the knee.

Radiostereometric analysis is a sophisticated radiographic technique with high measurement accuracy. In order to improve the accessibility of radiostereometric analysis for clinical use, a modified radiostereometric analysis procedure has been previously proposed that enables clinical radiographic views to be used for radiostereometric analysis. It has been successfully validated for its application to the hip wear study with the conventional bead-based radiostereometric analysis environment using computed radiography. In this study, we describe the implementation and validation of this technique for the knee study with the model-based radiostereometric analysis environment using digital radiography. A knee-joint phantom with 6 degrees of freedom was examined, and the bias and repeatability/reproducibility of the modified radiostereometric analysis approach were investigated following the newly updated ASTM recommendations. The bias parameters (mean ± 95% confidence interval) ranged from 0.008 ± 0.003 mm to 0.027 ± 0.006 mm for translation and from 0.014° ± 0.007° to 0.040° ± 0.020° for rotation. The repeatability standard deviation ranged from 0.004 to 0.020 mm for translation and from 0.005° to 0.015° for rotation. The 95% repeatability limit ranged from 0.011 to 0.055 mm for translation and from 0.014° to 0.041° for rotation. The reproducibility standard deviation ranged from 0.004 to 0.023 mm for translation and from 0.006° to 0.040° for rotation. The 95% reproducibility limit ranged from 0.012 to 0.063 mm for translation and from 0.016° to 0.112° for rotation. The modified procedure allows routine clinical radiographs to be used for radiostereometric analysis, which provides the possibility of adding quantitative measurements to current patient registries.

Surface integrity of polyethylene liners following trunnionosis of a dual modular neck total hip implant.

BACKGROUND: There has been a trend in the evolution of total hip arthroplasty towards increased modularity; with this increase in modularity come some potentially harmful consequences. Modularity at the neck shaft junction has been linked to corrosion, adverse reaction to metal debris and pseudotumour formation. AIM: The aim of this retrieval study is to assess whether the surface integrity of the polyethylene (PE) liner is affected by metal wear debris in a single implant design series of THA revised for trunnionosis. METHODS: A retrieval analysis of thirty dual-taper modular neck hip prostheses was performed; the mean time from implantation to revision was 2.7 years (1.02-6.2). PE liners were analysed using a scanning electron microscope with an energy dispersive spectrometer to assess for metal particles embedded on the liner surface. Serum metal ion levels and inflammatory markers were also analysed. RESULTS: There were small numbers of metal particles present on the PE liners. The mean number of metal particles per liner was four and the particles varied in size from 0.5 µm to 122 µm mean 16 µm. All patients had elevated metal ion levels: cobalt 6.02 µg/l, chromium 1.22 µg/l, titanium 3.11 µg/l. The cobalt:chromium ratio was 7.55:1. Inflammatory markers were also marginally raised (ESR 17; CRP 10). CONCLUSION: These results suggest that retention of PE liners may be reasonable when performing isolated revision of the femoral component in cases of failure at the modular neck stem junction, especially when the inner diameter of the liner is already optimised for head size and stability.