Spectra and photorelaxation of tris-biphenyl-triazine-type UV absorbers: from monomers to nanoparticles.

Water-insoluble organic UV filters like tris-biphenyl-triazine (TBPT) can be prepared as aqueous dispersions of nanoparticles. The particles consist of the respective UV absorber molecules and show strong UV absorbance. Since there is a certain solubility of such UV absorbers in organic solvents, it is possible to measure the absorbance spectrum also in solution, for instance in ethanol or dioxane. The UV spectrum of the aqueous dispersion shows a slight hypsochromic shift of the original band with an additional shoulder at longer wavelengths. For the understanding of the observed changes of UV-Vis spectra of this UV absorber, either dissolved in an organic solvent or dispersed as nanoparticles in water, DFT calculations were carried out with the respective monomer and aggregates of TBPT molecules in the different media. The calculated UV-Vis spectra of isolated, that means dissolved, TBPT molecules in ethanol and in dioxane agree well with experimentally observed ones. The observed changes in the shape of experimental UV-Vis spectra in aqueous dispersion cannot be explained with a solvent effect only. It was found that the studied molecules could form stable energetically favorable π-stacked aggregates, which show UV-Vis spectra in reasonable agreement with those experimentally observed in aqueous dispersion. Such aggregates of TBPT are most likely the reason for the observed additional shoulder in the UV/vis absorbance spectrum. In addition, the mechanism of the photochemical deactivation of excited TBPT molecules was studied in detail with TD DFT in dioxane and in water.

Characterization of polar surface groups on siliceous materials by inverse gas chromatography and the enthalpy-entropy compensation effect.

Surface-modified porous silica is a well-established composite material. To improve its embedding and application behavior, adsorption studies of various probe molecules have been performed using the technique of inverse gas chromatography (IGC). For this purpose, IGC experiments were carried out in the infinite dilution mode on macro-porous micro glass spheres before and after surface modification with (3-mercaptopropyl)trimethoxysilane. To provide information about the polar interactions between probe molecules and the silica surface, in particular, eleven polar molecules have been injected. In summary, the free surface energy for pristine silica ( γ S t o t a l = 229 mJ/m2) and for (3-mercaptopropyl)trimethoxysilane-modified silica ( γ S t o t a l = 135 mJ/m2) indicates a reduced wettability after surface modification. This is due to the reduction of the polar component of the free surface energy ( γ S S P ) from 191 mJ/m2 to 105 mJ/m2. Simultaneously, with the reduction of surface silanol groups caused by surface modification of silica and, therefore, the decrease in polar interactions, a substantial loss of Lewis acidity was observed by various IGC approaches. Experiments with all silica materials have been conducted at temperatures in the range from 90°C to 120°C to determine the thermodynamic parameters, such as adsorption enthalpy ( Δ H a d s ) and adsorption entropy ( Δ S a d s ), using the Arrhenius regression procedure evaluating the IGC data. With the help of the enthalpy-entropy compensation, two types of adsorption complexes are assumed between polar probe molecules and the silica surface because of different isokinetic temperatures. Identical adsorption complexes with an isokinetic temperature of 370°C have been assigned to alkanes and weakly interacting polar probes such as benzene, toluene, dichloromethane, and chloroform. Polar probe molecules with typical functional groups such as OH, CO, and CN, having the ability to form hydrogen bonds to the silica surface, exhibit a lower isokinetic temperature of 60°C. Quantum chemical calculations of the probe molecules on a non-hydroxylated and hydroxylated silica cluster supported the formation of hydrogen bonds in the case of a strong polar adsorption complex with a bonding distance of 1.7 nm-1.9 nm to the silica surface.

UV-Excited Luminescence in Porous Organosilica Films with Various Organic Components.

UV-induced photoluminescence of organosilica films with ethylene and benzene bridging groups in their matrix and terminal methyl groups on the pore wall surface was studied to reveal optically active defects and understand their origin and nature. The careful selection of the film's precursors and conditions of deposition and curing and analysis of chemical and structural properties led to the conclusion that luminescence sources are not associated with the presence of oxygen-deficient centers, as in the case of pure SiO2. It is shown that the sources of luminescence are the carbon-containing components that are part of the low-k-matrix, as well as the carbon residues formed upon removal of the template and UV-induced destruction of organosilica samples. A good correlation between the energy of the photoluminescence peaks and the chemical composition is observed. This correlation is confirmed by the results obtained by the Density Functional theory. The photoluminescence intensity increases with porosity and internal surface area. The spectra become more complicated after annealing at 400 °C, although Fourier transform infrared spectroscopy does not show these changes. The appearance of additional bands is associated with the compaction of the low-k matrix and the segregation of template residues on the surface of the pore wall.

In-Situ Imaging of a Light-Induced Modification Process in Organo-Silica Films via Time-Domain Brillouin Scattering.

We applied time-domain Brillouin scattering (TDBS) for the characterization of porogen-based organosilicate glass (OGS) films deposited by spin-on-glass technology and cured under different conditions. Although the chemical composition and porosity measured by Fourier-transform infrared (FTIR) spectroscopy and ellipsometric porosimetry (EP) did not show significant differences between the films, remarkable differences between them were revealed by the temporal evolution of the Brillouin frequency (BF) shift of the probe light in the TDBS. The observed modification of the BF was a signature of the light-induced modification of the films in the process of the TDBS experiments. It correlated to the different amount of carbon residue in the samples, the use of ultraviolet (UV) femtosecond probe laser pulses in our optical setup, and their intensity. In fact, probe radiation with an optical wavelength of 356 nm appeared to be effective in removing carbon residue through single-photon absorption processes, while its two-photon absorption might have led to the breaking of Si-CH3 bonds in the OSG matrix. The quantum chemical calculations confirmed the latter possibility. This discovery demonstrates the possibility of local modifications of OSG films with a nanometric resolution via nonlinear optical processes, which could be important, among other applications, for the creation of active surface sites in the area-selective deposition of atomic layers.

Metalloligands based on Robson-type amino-thiophenolato macrocycles for assembly of heterotrimetallic complexes.

The ability of macrocyclic Co and Ni aminothiolate complexes to act as metalloligands towards cuprate ions was established. Adduct formation is enabled by a thiolate-to-Cu+ charge transfer (CT) interaction giving stable heterotrimetallics with magnetic properties.

Enhanced Removal and Toxicity Declineof Diclofenac by Combining UVA Treatmentand Adsorption of Photoproductsto Polyvinylidene Difluoride.

The occurrence of micropollutants in the environment is an emerging issue. Diclofenac, a non-steroidal anti-inflammatory drug, is one of the most frequently detected pharmaceuticals in the environment worldwide. Diclofenac is transformed by UVA light into different products with higher toxicity. The absorbance of the transformation products overlaps with the absorbance of diclofenac itself and inhibits the ongoing photoreaction. By adding polyvinylidene difluoride (PVDF), the products adsorb to the surface of PVDF. Therefore, phototransformation of diclofenac and total organic carbon (TOC) removal is enhanced and the toxicity decreased. At 15 min and 18 h of UVA treatment, removal of diclofenac and TOC increases from 56% to 65% and 18% to 54%, respectively, when PVDF is present. The toxicity of a UVA treated (18 h) diclofenac solution doubles (from 5 to 10, expressed in toxicity units, TU), while no toxicity was detectable when PVDF is present during UVA treatment (TU = 0). PVDF does not need to be irradiated itself but must be present during photoreaction. The adsorbent can be reused by washing with water or ethanol. Diclofenac (25 mg L-1) UVA light irradiation was monitored with high performance liquid chromatography (HPLC), UV-Vis spectroscopy and by analysing the decrease of TOC. The toxicity towards Vibrio fischeri was examined according to DIN EN ISO 11348-1: 2009-05. Density functional theory (DFT) was used to simulate the phototransformation products known in literature as well as further products identified via gas chromatography-mass spectrometry (GC-MS). The absorption spectra, reaction enthalpies (ΔH) and Gibbs free energy of reactions (ΔG) were calculated. The combination of UVA irradiation of diclofenac with adsorption of photoproducts to PVDF is unique and opens up new possibilities to enhance removal of pollutants from water.

Effects of Methyl Terminal and Carbon Bridging Groups Ratio on Critical Properties of Porous Organosilicate-Glass Films.

Organosilicate glass-based porous low dielectic constant films with different ratios of terminal methyl to bridging organic (methylene, ethylene and 1,4-phenylene) groups are spin-on deposited by using a mixture of alkylenesiloxane with organic bridges and methyltrimethoxysilane, followed by soft baking at 120-200 °C and curing at 430 °C. The films' porosity was controlled by using sacrificial template Brij® L4. Changes of the films' refractive indices, mechanical properties, k-values, porosity and pore structure versus chemical composition of the film's matrix are evaluated and compared with methyl-terminated low-k materials. The chemical resistance of the films to annealing in oxygen-containing atmosphere is evaluated by using density functional theory (DFT). It is found that the introduction of bridging groups changes their porosity and pore structure, increases Young's modulus, but the improvement of mechanical properties happens simultaneously with the increase in the refractive index and k-value. The 1,4-phenylene bridging groups have the strongest impact on the films' properties. Mechanisms of oxidative degradation of carbon bridges are studied and it is shown that 1,4-phenylene-bridged films have the highest stability. Methylene- and ethylene-bridged films are less stable but methylene-bridged films show slightly higher stability than ethylene-bridged films.

Gold Nanoparticle as a Lewis Catalyst for Water Elimination of Tyrosine-•OH Adducts: A Radiation and Quantum Chemical Study.

The role of gold nanoparticles (AuNPs) in the degradation of tyrosine intermediates formed during the radiation-induced •OH reaction with tyrosine at pH 6.5 is investigated by measuring the radiolytic yields, G, of tyrosine (-Tyr), dityrosine (DT), and 3,4 dihydroxyphenylalanine (DOPA). The G(DT) is doubled, whereas G(-Tyr) calculated is halved in the presence of 6.0 × 10-10 mol dm-3 AuNPs. Pulse radiolysis studies are carried out to elucidate the mechanism and nature of the transient formed in the reaction of •OH and •N3 with tyrosine. The formation of tyrosyl radical in the presence of AuNPs is found to be a major pathway through the decay of tyrosine-•OH adducts via the water elimination reaction, which is found to be 3× faster in the presence of AuNPs. Quantum chemical calculations on the system showed favorable formation of the tyrosine-AuNP complex. A new plausible mechanism of tyrosine-AuNP complex acting as a Lewis type catalyst in the decay of tyrosine-•OH adducts leading to reduced DOPA formation is proposed. The proposed mechanism is also complemented by the electronic spectra and energetics of the reaction of •OH with tyrosine using density functional theory calculations. Significantly, the H-shift reaction of ortho-tyrosine-•OH adducts is also found to be energetically viable. The investigation provides a new physical insight into the effect of AuNPs on the decay of free-radical transient species and demonstrates the potential of radiation chemical techniques and quantum chemical calculations as a tool for understanding the impact of metal nanoparticles in free-radical oxidation of amino acids, which is important in the use of metal nanoparticles for biomedical applications.

Spectra and Photorelaxation of Hydroxyphenyl-benzotriazole-Type UV Absorbers: From Monomers to Nanoparticles.

Water-insoluble organic UV filters such as 2,2'-methylene-bis-(6-(2H-benzotriazole-2-yl)-4-(1,1,3,3-tetramethylbutyl)-phenol) (MBBT) can be prepared as aqueous dispersions of nanoparticles. The particles consist of the respective UV absorber molecules and show strong UV absorbance. Because there is a certain solubility of such UV absorbers in organic solvents, it is possible to measure the absorbance spectrum in solution also, for instance, in ethanol or dioxane. The UV spectrum of the aqueous dispersion shows a significant bathochromic shift of the long-wavelength band with an additional shoulder. For the understanding of the observed changes of UV-vis spectra of this UV absorber, either dissolved in an organic solvent or dispersed as nanoparticles in water, density functional theory (DFT) calculations were carried out with the respective monomer and aggregates of MBBT molecules in different media. The calculated UV-vis spectra of isolated, that means dissolved, MBBT molecules in ethanol and in dioxane agree well with the experimentally observed ones. The observed changes in the shape and position of experimental UV-vis spectra in aqueous dispersion cannot be explained with the solvent effect alone. It was found that the studied molecules could form stable energetically favorable π-stacked dimers, which show UV-vis spectra in reasonable agreement with those experimentally observed in aqueous dispersion. Such aggregates of MBBT are most likely the reason for the observed bathochromic shift in the UV-vis absorption spectrum. In addition, the mechanism of the photochemical deactivation of the excited MBBT molecules was studied in detail with time-dependent DFT in dioxane and in water. The energetically most favorable pathway for the deactivation of absorbed energy by MBBT occurs through intramolecular enol-keto tautomerization in the first excited singlet state.

Reaction of 1-propanol with Ozone in Aqueous Media.

The main aim of this work is to substantiate the mechanism of 1-propanol oxidation by ozone in aqueous solution when the substrate is present in large excess. Further goals are assessment of the products, their formation yields as well as the kinetic parameters of the considered reaction. The reaction of ozone with 1-propanol in aqueous solution occurs via hydride transfer, H-abstraction and insertion. Of these three mechanisms, the largest share is for hydride transfer. This implies the extraction of an hydride ion from the activated C-H group by O3 according to reaction: (C2H5)(H)(HO)C-H + O3 → [(C2H5)(H)(HO)C+ + HO3-]cage → (C2H5)(H)(HO)C+ + HO3-. The experimentally determined products and their overall formation yields with respect to ozone are: propionaldehyde-(60 ± 3)%, propionic acid-(27.4 ± 1.0)%, acetaldehyde-(4.9 ± 0.3)%, acetic acid-(0.3 ± 0.1)%, formaldehyde-(1.0 ± 0.1)%, formic acid-(4.6 ± 0.3)%, hydrogen peroxide-(11.1 ± 0.3)% and hydroxyl radical-(9.8 ± 0.3)%. The reaction of ozone with 1-propanol in aqueous media follows a second order kinetics with a reaction rate constant of (0.64 ± 0.02) M-1·s-1 at pH = 7 and 23 °C. The dependence of the second order rate constant on temperature is described by the equation: l n   k I I = ( 27.17 ± 0.38 ) - ( 8180 ± 120 ) × T - 1 , which gives the activation energy, Ea = (68 ± 1) kJ mol-1 and pre-exponential factor, A = (6.3 ± 2.4) × 1011 M-1 s-1. The nature of products, their yields and the kinetic data can be used in water treatment. The fact that the hydride transfer is the main pathway in the 1-propanol/ozone system can probably be transferred on other systems in which the substrate is characterized by C-H active sites only.

Functionalization of porous siliceous materials, Part 2: Surface characterization by inverse gas chromatography.

Surface modification of porous glass beads by ethanol-based 3-mercaptopropyltrimethoxysilane (MPTMS) grafting solutions is directly evidenced by nitrogen adsorption, elemental analysis, thermogravimetry, infrared and 29Si CP MAS NMR spectroscopy. Furthermore, the energetic characterization of the surface is essential to understand comprehensively the physico-chemical interactions between the pristine and MPTMS-modified surface and its gas/liquid-phase environment. In this study, inverse gas chromatography (IGC) is used to characterize the surface properties of porous glass (PG). By means of IGC at infinite dilution (IGC-ID), the dispersive component of the surface energy (γsd), the enthalpy and entropy of adsorption of C6-C10 hydrocarbon probes were determined at temperatures between 30 and 120 °C. The specific component of the surface energy (γssp) at the temperature of 120 °C has been obtained via the Van Oss theory and a least-squares procedure evaluating the IGC data of 8 polar probe molecules collectively. After surface silylation, the total surface energy (γst) decreased from 402 to 255 mJ/m² indicating both a reduced wettability and an increased hydrophobicity of the MPTMS-modified PG. Moreover, the acidity/basicity parameters according to the Van Oss and the Gutmann approach indicated that the acidity of the PG surface decreases by MPTMS grafting. Using n-octane and isopropanol probes, IGC at finite concentration (IGC-FC) was applied to obtain their adsorption isotherms and subsequently the BET specific surface areas. In addition, the surface heterogeneity of the studied PGs was also computed. The energy distribution functions of adsorption sites were monomodal (peak maximum at about 22 kJ/mol) for the n-octane probe, while isopropanol revealed a bimodal distribution function (maxima at about 18 and 25 kJ/mol) on both pristine and MPTMS-modified PG. Furthermore, the proportion of high energy sites (apparently assigned to SiOH groups) has been reduced by surface modification from 65% to only 35% despite a high surface coverage of ˜10 MPTMS species/nm2. These findings are in agreement with the results of 29Si CP MAS NMR measurements and are supported by DFT calculations on the adsorption of isopropanol and n-octane on the surface of a silica cluster model.

Diaqua-ß-octaferrocenyltetraphenylporphyrin: a multiredox-active and air-stable 16π non-aromatic species.

Herein the synthesis and properties of the first ß-octaferrocenyltetraphenylporphyrin, {TPPFc8(H2O)2}, in its extraordinary stable and non-aromatic 16π form are reported, showing seven separate reversible redox events. As oxidation progresses, the neighbouring ferrocenyls of the pyrrole subunits display moderate electronic coupling, while electron transfer along the 16π porphyrin cycle was, due to its non-aromatic nature, not observed.

Conversion of a Patterned Organic Resist into a High Performance Inorganic Hard Mask for High Resolution Pattern Transfer.

Polyphthalaldehyde is a self-developing resist material for electron beam and thermal scanning probe lithography (t-SPL). Removing the resist in situ (during the lithography process itself) simplifies processing and enables direct pattern inspection, however, at the price of a low etch resistance of the resist. To convert the material into a etch resistant hard mask, we study the selective cyclic infiltration of trimethyl-aluminum (TMA)/water into polyphthalaldehyde. It is found that TMA diffuses homogeneously through the resist, leading to material expansion and formation of aluminum oxide concurrent to the exposure to water and the degradation of the polyphthalaldehyde polymer. The plasma etch resistance of the infiltrated resist is significantly improved, as well as its stability. Using a silicon substrate coated with 13 nm silicon nitride and 7 nm cross-linked polystyrene, high resolution polyphthalaldehyde patterning is performed using t-SPL. After TMA/H2O infiltration, it is demonstrated that pattern transfer into silicon can be achieved with good fidelity for structures as small as 10 nm, enabling >10× amplification and low surface roughness. The presented results demonstrate a simplified use of polyphthalaldehyde resist, targeting feature scales at nanometer range, and suggest that trimethyl-aluminum infiltration can be applied to other resist-based lithography techniques.

Acylstannanes: Cleavable and Highly Reactive Photoinitiators for Radical Photopolymerization at Wavelengths above 500†nm with Excellent Photobleaching Behavior.

Within this work, a novel acylstannane-based photoinitiator (PI) is presented. Tetrakis(2,4,6-trimethylbenzoyl)stannane (1) displays outstanding properties compared to state-of-the-art acylgermane-based initiators. Most importantly, the initiator shows absorption up to 550 nm, which allows higher penetration depths, especially in highly filled photopolymers. Besides that, 1 shows extremely high photoinitiating activity towards (meth)acrylic double bonds, as well as very fast photobleaching. Furthermore, unlike many organotin compounds, 1 shows surprisingly low cytotoxicity.

The stability limits of highly active nitrogen doped carbon ORR nano-catalysts: a mechanistic study of degradation reactions.

A new approach in electrode catalysis bearing immense potential for electrochemical technologies is the prospect of carbon-based electrodes. Pristine carbon nanostructures are relatively inert and modifications like nitrogen doping are known for their beneficial effects on the electrochemical activity of carbon nanomaterials in both alkaline and acidic media. However, the long-term stability of these materials, especially in an acidic environment, is rarely mentioned. Here, we evaluate the stability and long-term degradation of nitrogen doped graphene flakes as an oxygen reduction electrocatalyst with theoretical and experimental techniques. We assume that nitrogen dopants in the graphene sheet interact with e- and H+ at the electrode-electrolyte interface, leading to NH3 scission and continuous catalyst deactivation. With Density Functional Theory calculations, NH3 scission pathways of pyridinic, graphitic and pyrrolic nitrogen species were analyzed and compared under different operating conditions which are relevant for low and intermediate temperature fuel cells. The computational results are correlated with electrochemical measurements in solid acid fuel cells in a humidified oxygen environment at 240 °C.

Modular Synthesis of Dipyrroloquinolines: A Combined Synthetic and Mechanistic Study.

A straightforward synthesis of [1,2-a][3',2'-c]dipyrroloquinolines has been developed generating up to eight new σ-bonds and five new stereogenic centers in a simple and modular one-pot operation. Generally good to excellent yields and moderate to good stereoselectivities in favor of the all-cis stereoisomer were observed. A detailed investigation combining synthetic studies, analytical measurements, and theoretical calculations has been conducted to elucidate the reaction mechanism using ESI- and liquid-beam IR-laser desorption mass spectrometry as well as DFT calculations. Key steps of this sequential transformation include a Lewis acid-catalyzed vinylogous Mukaiyama-Mannich reaction of bis(silyl) dienediolate 1 and a Brønsted acid-promoted Mannich-Pictet-Spengler reaction cascade reaction to complete the synthesis of the dipyrroloquinoline core of the target compounds.

Reaction of 2-propanol with ozone in aqueous media.

This paper deals with reactions occurring in the aqueous system of 2-propanol/ozone. The considered reactions are discussed from thermodynamic and kinetic points of view. The major finding refers to the fact that 2-propanol reacts with O3 mainly via hydride transfer: (HO)(H3C)2CH + O3 â†’ [(HO)(H3C)2C+ + HO3-]cage â†’ (HO)(H3C)2C+ + HO3- â†’ (H3C)2CO + H2O + O2 Arguments supporting this proposed mechanism are: high exergonicity of reaction (ΔG = -234 kJ mol-1 for the first two steps), low HO yield - (2.4 ± 0.5)% and high acetone yield - (87.2 ± 1.5)%. Other oxidation products detected within the system are acetaldehyde - (1.4 ± 0.1)%, formaldehyde - (4.0 ± 0.1)%, acetic acid - (2.8 ± 0.2)%, formic acid - (0.6 ± 0.2)% and hydrogen peroxide - (1.5 ± 0.1)%. The temperature dependence of the second order rate constant for the reaction 2-propanol + O3 â†’ products is ln kII = 29.64-8500 × T-1. The activation energy and pre-exponential factor derived from this relationship are (71 ± 3) kJ mol-1 and (7.5 ± 6.4) × 1012 M-1 s-1, respectively. At 23 °C, the second order rate constant is kII = (2.7 ± 0.1) M-1 s-1. The low reaction rate can be explained by the transfer of one hydride ion from 2-propanol to electrophilic ozone.

Degradation of perfluorinated compounds by sulfate radicals - New mechanistic aspects and economical considerations.

Perfluorinated organic compounds (PFC) are an important group of pollutants, which are difficult to be degraded in conventional water treatment. Even hydroxyl radical based processes are not capable to degrade these compounds. Sulfate radicals can oxidize a group of PFC, i.e., perfluorinated carboxylic (PFCAs) acids. However, information in literature on kinetics and reaction mechanism is largely based on model simulations which are prone to errors. The present study provides mechanistic insights based on product formation, material balances, competition kinetics experiments and quantum chemical calculations. Furthermore, energy requirements for sulfate radical based degradation of PFCA is evaluated in the present study. PFCAs can be partly mineralized in chain reactions initiated by sulfate radicals (SO4─). The perfluorinated acetic acid (TFA), propionic acid, and butanoic acid are largely degraded in a primary reaction with sulfate radicals. In case of PFCA with a chain length of > 4 carbons low yields of PFCA products were observed. Regarding reaction kinetics sulfate radicals react very slow with PFCAs (≈ 104 M-1 s-1). Thus, the energy demand required for generation of SO4─ by photolysis of S2O82─ (UV/S2O82-) is very high. A 90% degradation of a PFCA by UV/S2O82- was estimated to be 55 kW h m-3 in pure water.

Self-initiation of UV photopolymerization reactions using tetrahalogenated bisphenol A (meth)acrylates.

The potential of tetrachlorinated and tetrabrominated bisphenol A diacrylates and dimethacrylates for self-initiation of a radical photopolymerization was investigated. The kinetics of the photopolymerization of an acrylic model varnish containing halogenated monomers was studied by real-time FTIR spectroscopy, whereas the formation of reactive species and secondary products was elucidated by laser flash photolysis and product analysis by GC-MS after steady-state photolysis. The interpretation of the experimental data and the analysis of possible reaction pathways were assisted by quantum chemical calculations. It was shown that all halogenated monomers lead to a significant acceleration of the photopolymerization kinetics at a minimum concentration of 5 wt%. Steady-state and laser flash photolysis measurements as well as quantum chemical calculations showed that brominated and chlorinated samples do not follow the same pathway to generate radical species. Whereas chlorinated (meth)acrylates may cleave only at the C-O bonds of the carboxyl groups resulting in acrolein and oxyl radicals for initiation, brominated monomers may cleave either at the C-O bonds or at the C-Br bonds delivering aryl and bromine radicals. The quantum yields for the photolysis of the halogenated monomers were found to be in the order of 0.1 for acrylates and 0.2 for methacrylates (with an estimated error of 25%), independently of the attached Br and Cl halogens. Finally, the trihalogenated bisphenol A di(meth)acrylate radicals and the acrolein radicals were found to show the highest efficiencies for the reaction with another acrylic double bond leading to the formation of a polymer network.

A Complex Catalytic Reaction Caught in the Act: Intermediates and Products Sampling Online by Liquid µ-Beam Mass Spectrometry and Theoretical Modeling.

Liquid-beam IR-laser desorption mass spectrometry has been used to monitor the reactants, intermediates, and products of a complex organic signature reaction in real time on multiple timescales directly from the liquid phase. The reaction was chosen because it has advantages in medicinal chemistry applications, and the three-component, modular construction provides a means to generate molecular diversity rapidly. Under Lewis acid catalysis, a vinylogous Mannich reaction was monitored as it generated a δ-amino-α-silyloxy-α,ß-unsaturated ester, which upon hydrolysis to the corresponding α-keto ester spontaneously reacted in a [3+2] cycloannulation to the final pyrrolo[2,1-b]benzoxazole. The kinetic data were compared with predictions of quantum chemical calculations to elucidate and verify or exclude reaction pathways and mechanisms for a possible rational optimization of the reaction. The simplicity and rapid response of this approach make it a very powerful technique for online characterization of chemical reactions on timescales spanning several orders of magnitude. This enables full control over chemical reactions, thereby maximizing the product yield. This combined experimental and theoretical approach opens up a new route for the study of novel chemistry in liquid-phase reactions.