Droplet impact on doubly re-entrant structures.

Doubly re-entrant pillars have been demonstrated to possess superior static and dynamic liquid repellency against highly wettable liquids compared to straight or re-entrant pillars. Nevertheless, there has been little insight into how the key structural parameters of doubly re-entrant pillars influence the hydrodynamics of impacting droplets. In this work, we carried out numerical simulations and experimental studies to portray the fundamental physical phenomena that can explain the alteration of the surface wettability from adjusting the design parameters of the doubly re-entrant pillars. On the one hand, three-dimensional multiphase flow simulations of droplet impact were conducted to probe the predominance of the overhang structure in dynamic liquid repellency. On the other hand, the numerical results of droplet impact behaviours are agreed by the experimental results for different pitch sizes and contact angles. Furthermore, the dimensions of the doubly re-entrant pillars, including the height, diameter, overhang length and overhang thickness, were altered to establish their effect on droplet repellency. These findings present the opportunity for manipulations of droplet behaviours by means of improving the critical dimensional parameters of doubly re-entrant structures.

Active control of mid-wavelength infrared non-linearity in silicon photonic crystal slab.

Natural materials' inherently weak nonlinear response demands the design of artificial substitutes to avoid optically large samples and complex phase-matching techniques. Silicon photonic crystals are promising artificial materials for this quest. Their nonlinear properties can be modulated optically, paving the way for applications ranging from ultrafast information processing to quantum technologies. A two-dimensional 15-µm-thick silicon photonic structure, comprising a hexagonal array of air holes traversing the slab's thickness, has been designed to support a guided resonance for the light with a wavelength of 4-µm. At the resonance conditions, a transverse mode of the light is strongly confined between the holes in the "veins" of the silicon component. Owing to the confinement, the structure exhibits a ratio of nonlinear to linear absorption coefficients threefold higher than the uniform silicon slab of the same thickness. A customised time-resolved Z-scan method with provisions to accommodate ultrafast pump-probe measurements was used to investigate and quantify the non-linear response. We show that optically pumping free charge carriers into the structure decouples the incoming light from the resonance and reduces the non-linear response. The time-resolved measurements suggest that the decoupling is a relatively long-lived effect on the scale comparable to the non-radiative recombination in the bulk material. Moreover, we demonstrate that the excited free carriers are not the source of the nonlinearity, as this property is determined by the structure design.

A computationally-inexpensive strategy in CT image data augmentation for robust deep learning classification in the early stages of an outbreak.

Coronavirus disease 2019 (COVID-19) has spread globally for over three years, and chest computed tomography (CT) has been used to diagnose COVID-19 and identify lung damage in COVID-19 patients. Given its widespread, CT will remain a common diagnostic tool in future pandemics, but its effectiveness at the beginning of any pandemic will depend strongly on the ability to classify CT scans quickly and correctly when only limited resources are available, as it will happen inevitably again in future pandemics. Here, we resort into the transfer learning procedure and limited hyperparameters to use as few computing resources as possible for COVID-19 CT images classification. Advanced Normalisation Tools (ANTs) are used to synthesise images as augmented/independent data and trained on EfficientNet to investigate the effect of synthetic images. On the COVID-CT dataset, classification accuracy increases from 91.15% to 95.50% and Area Under the Receiver Operating Characteristic (AUC) from 96.40% to 98.54%. We also customise a small dataset to simulate data collected in the early stages of the outbreak and report an improvement in accuracy from 85.95% to 94.32% and AUC from 93.21% to 98.61%. This study provides a feasible Low-Threshold, Easy-To-Deploy and Ready-To-Use solution with a relatively low computational cost for medical image classification at an early stage of an outbreak in which scarce data are available and traditional data augmentation may fail. Hence, it would be most suitable for low-resource settings.

Madelung Formalism for Electron Spill-Out in Nonlocal Nanoplasmonics.

Current multiscale plasmonic systems pose a modeling challenge. Classical macroscopic theories fail to capture quantum effects in such systems, whereas quantum electrodynamics is impractical given the total size of the experimentally relevant systems, as the number of interactions is too large to be addressed one by one. To tackle the challenge, in this paper we propose to use the Madelung form of the hydrodynamic Drude model, in which the quantum effect electron spill-out is incorporated by describing the metal-dielectric interface using a super-Gaussian function. The results for a two-dimensional nanoplasmonic wedge are correlated to those from nonlocal full-wave numerical calculations based on a linearized hydrodynamic Drude model commonly employed in the literature, showing good qualitative agreement. Additionally, a conformal transformation perspective is provided to explain qualitatively the findings. The methodology described here may be applied to understand, both numerically and theoretically, the modular inclusions of additional quantum effects, such as electron spill-out and nonlocality, that cannot be incorporated seamlessly by using other approaches.

Taming non-radiative recombination in Si nanocrystals interlinked in a porous network.

A range of the distinctive physical properties, comprising high surface-to-volume ratio, possibility to achieve mechanical and chemical stability after a tailored treatment, controlled quantum confinement and the room-temperature photoluminescence, combined with mass production capabilities offer porous silicon unmatched capabilities required for the development of electro-optical devices. Yet, the mechanism of the charge carrier dynamics remains poorly controlled and understood. In particular, non-radiative recombination, often the main process of the excited carrier's decay, has not been adequately comprehended to this day. Here we show, that the recombination mechanism critically depends on the composition of surface passivation. That is, hydrogen passivated material exhibits Shockley-Read-Hall type of decay, while for oxidised surfaces, it proceeds by two orders of magnitude faster and exclusively through the Auger process. Moreover, it is possible to control the source of recombination in the same sample by applying a cyclic sequence of hydrogenation-oxidation-hydrogenation processes, and, consequently switching on-demand between Shockley-Read-Hall and Auger recombinations. Remarkably, irregardless of the recombination mechanism, the rate constant scales inversely with the average volume of individual silicon nanocrystals contained in the material. Thus, the type of the non-radiative recombination is established by the composition of the passivation, while its rate depends on the degree of the charge carriers' quantum confinement.

Hybrid reflection retrieval method for terahertz dielectric imaging of human bone.

Terahertz imaging is becoming a biological imaging modality in its own right, alongside the more mature infrared and X-ray techniques. Nevertheless, extraction of hyperspectral, biometric information of samples is limited by experimental challenges. Terahertz time domain spectroscopy reflection measurements demand highly precise alignment and suffer from limitations of the sample thickness. In this work, a novel hybrid Kramers-Kronig and Fabry-Pérot based algorithm has been developed to overcome these challenges. While its application is demonstrated through dielectric retrieval of glass-backed human bone slices for prospective characterisation of metastatic defects or osteoporosis, the generality of the algorithm offers itself to wider application towards biological materials.

Study of Low Terahertz Radar Signal Backscattering for Surface Identification.

This study explores the scattering of signals within the mm and low Terahertz frequency range, represented by frequencies 79 GHz, 150 GHz, 300 GHz, and 670 GHz, from surfaces with different roughness, to demonstrate advantages of low THz radar for surface discrimination for automotive sensing. The responses of four test surfaces of different roughness were measured and their normalized radar cross sections were estimated as a function of grazing angle and polarization. The Fraunhofer criterion was used as a guideline for determining the type of backscattering (specular and diffuse). The proposed experimental technique provides high accuracy of backscattering coefficient measurement depending on the frequency of the signal, polarization, and grazing angle. An empirical scattering model was used to provide a reference. To compare theoretical and experimental results of the signal scattering on test surfaces, the permittivity of sandpaper has been measured using time-domain spectroscopy. It was shown that the empirical methods for diffuse radar signal scattering developed for lower radar frequencies can be extended for the low THz range with sufficient accuracy. The results obtained will provide reference information for creating remote surface identification systems for automotive use, which will be of particular advantage in surface classification, object classification, and path determination in autonomous automotive vehicle operation.

Experimental signature of a topological quantum dot.

Topological insulator nanoparticles (TINPs) host topologically protected Dirac surface states, just like their bulk counterparts. For TINPs of radius <100 nm, quantum confinement on the surface results in the discretization of the Dirac cone. This system of discrete energy levels is referred to as a topological quantum dot (TQD) with energy level spacing on the order of Terahertz (THz), which is tunable with material-type and particle size. The presence of these discretized energy levels in turn leads to a new electron-mediated phonon-light coupling in the THz range, and the resulting mode can be observed in the absorption cross-section of the TINPs. We present the first experimental evidence of this new quantum phenomenon in Bi2Te3 topological quantum dots, remarkably observed at room temperature.

Tunable compression of THz chirped pulses using a helical graphene ribbon-loaded hollow-core waveguide.

Pulse shaping is important for communications, spectroscopy, and other applications that require high peak power and pulsed operation, such as radar systems. Unfortunately, pulse shaping remains largely elusive for terahertz (THz) frequencies. To address this void, a comprehensive study on the dispersion tunability properties of THz chirped pulses traveling through a dielectric-lined hollow-core waveguide loaded with a helical graphene ribbon is presented. It is demonstrated that there is an optimal compression waveguide length over which THz chirped pulses reach the maximum compression. The optimal length is dependent on the chirp pulse duration. It is shown that by applying an electrostatic controlling gate voltage (Vg) of 0 and 30 V on the helical graphene ribbon, the temporal input pulses of width 8 and 12 ps, propagating through two different lengths, can be tuned by 5.9% and 8%, respectively, in the frequency range of 2.15-2.28 THz.

Generation of radially-polarized terahertz pulses for coupling into coaxial waveguides.

Coaxial waveguides exhibit no dispersion and therefore can serve as an ideal channel for transmission of broadband THz pulses. Implementation of THz coaxial waveguide systems however requires THz beams with radially-polarized distribution. We demonstrate the launching of THz pulses into coaxial waveguides using the effect of THz pulse generation at semiconductor surfaces. We find that the radial transient photo-currents produced upon optical excitation of the surface at normal incidence radiate a THz pulse with the field distribution matching the mode of the coaxial waveguide. In this simple scheme, the optical excitation beam diameter controls the spatial profile of the generated radially-polarized THz pulse and allows us to achieve efficient coupling into the TEM waveguide mode in a hollow coaxial THz waveguide. The TEM quasi-single mode THz waveguide excitation and non-dispersive propagation of a short THz pulse is verified experimentally by time-resolved near-field mapping of the THz field at the waveguide output.

The Interplay of Symmetry and Scattering Phase in Second Harmonic Generation from Gold Nanoantennas.

Nonlinear phenomena are central to modern photonics but, being inherently weak, typically require gradual accumulation over several millimeters. For example, second harmonic generation (SHG) is typically achieved in thick transparent nonlinear crystals by phase-matching energy exchange between light at initial, ω, and final, 2ω, frequencies. Recently, metamaterials imbued with artificial nonlinearity from their constituent nanoantennas have generated excitement by opening the possibility of wavelength-scale nonlinear optics. However, the selection rules of SHG typically prevent dipole emission from simple nanoantennas, which has led to much discussion concerning the best geometries, for example, those breaking centro-symmetry or incorporating resonances at multiple harmonics. In this work, we explore the use of both nanoantenna symmetry and multiple harmonics to control the strength, polarization and radiation pattern of SHG from a variety of antenna configurations incorporating simple resonant elements tuned to light at both ω and 2ω. We use a microscopic description of the scattering strength and phases of these constituent particles, determined by their relative positions, to accurately predict the SHG radiation observed in our experiments. We find that the 2ω particles radiate dipolar SHG by near-field coupling to the ω particle, which radiates SHG as a quadrupole. Consequently, strong linearly polarized dipolar SHG is only possible for noncentro-symmetric antennas that also minimize interference between their dipolar and quadrupolar responses. Metamaterials with such intra-antenna phase and polarization control could enable compact nonlinear photonic nanotechnologies.

Selective Pyroelectric Detection of Millimetre Waves Using Ultra-Thin Metasurface Absorbers.

Sensing infrared radiation is done inexpensively with pyroelectric detectors that generate a temporary voltage when they are heated by the incident infrared radiation. Unfortunately the performance of these detectors deteriorates for longer wavelengths, leaving the detection of, for instance, millimetre-wave radiation to expensive approaches. We propose here a simple and effective method to enhance pyroelectric detection of the millimetre-wave radiation by combining a compact commercial infrared pyro-sensor with a metasurface-enabled ultra-thin absorber, which provides spectrally- and polarization-discriminated response and is 136 times thinner than the operating wavelength. It is demonstrated that, due to the small thickness and therefore the thermal capacity of the absorber, the detector keeps the high response speed and sensitivity to millimetre waves as the original infrared pyro-sensor does against the regime of infrared detection. An in-depth electromagnetic analysis of the ultra-thin resonant absorbers along with their complex characterization by a BWO-spectroscopy technique is presented. Built upon this initial study, integrated metasurface absorber pyroelectric sensors are implemented and tested experimentally, showing high sensitivity and very fast response to millimetre-wave radiation. The proposed approach paves the way for creating highly-efficient inexpensive compact sensors for spectro-polarimetric applications in the millimetre-wave and terahertz bands.

Soret fishnet metalens antenna.

At the expense of frequency narrowing, binary amplitude-only diffractive optical elements emulate refractive lenses without the need of large profiles. Unfortunately, they also present larger Fresnel reflection loss than conventional lenses. This is usually tackled by implementing unattractive cumbersome designs. Here we demonstrate that simplicity is not at odds with performance and we show how the fishnet metamaterial can improve the radiation pattern of a Soret lens. The building block of this advanced Soret lens is the fishnet metamaterial operating in the near-zero refractive index regime with one of the edge layers designed with alternating opaque and transparent concentric rings made of subwavelength holes. The hybrid Soret fishnet metalens retains all the merits of classical Soret lenses such as low profile, low cost and ease of manufacturing. It is designed for the W-band of the millimeter-waves range with a subwavelength focal length FL = 1.58 mm (0.5λ0) aiming at a compact antenna or radar systems. The focal properties of the lens along with its radiation characteristics in a lens antenna configuration have been studied numerically and confirmed experimentally, showing a gain improvement of ~2 dB with respect to a fishnet Soret lens without the fishnet metamaterial.

Planar holographic metasurfaces for terahertz focusing.

Scientists and laymen alike have always been fascinated by the ability of lenses and mirrors to control light. Now, with the advent of metamaterials and their two-dimensional counterpart metasurfaces, such components can be miniaturized and designed with additional functionalities, holding promise for system integration. To demonstrate this potential, here ultrathin reflection metasurfaces (also called metamirrors) designed for focusing terahertz radiation into a single spot and four spaced spots are proposed and experimentally investigated at the frequency of 0.35 THz. Each metasurface is designed using a computer-generated spatial distribution of the reflection phase. The phase variation within 360 deg is achieved via a topological morphing of the metasurface pattern from metallic patches to U-shaped and split-ring resonator elements, whose spectral response is derived from full-wave electromagnetic simulations. The proposed approach demonstrates a high-performance solution for creating low-cost and lightweight beam-shaping and beam-focusing devices for the terahertz band.

High density micro-pyramids with silicon nanowire array for photovoltaic applications.

We use a metal assisted chemical etch process to fabricate silicon nanowire arrays (SiNWAs) onto a dense periodic array of pyramids that are formed using an alkaline etch masked with an oxide layer. The hybrid micro-nano structure acts as an anti-reflective coating with experimental reflectivity below 1% over the visible and near-infrared spectral regions. This represents an improvement of up to 11 and 14 times compared to the pyramid array and SiNWAs on bulk, respectively. In addition to the experimental work, we optically simulate the hybrid structure using a commercial finite difference time domain package. The results of the optical simulations support our experimental work, illustrating a reduced reflectivity in the hybrid structure. The nanowire array increases the absorbed carrier density within the pyramid by providing a guided transition of the refractive index along the light path from air into the silicon. Furthermore, electrical simulations which take into account surface and Auger recombination show an efficiency increase for the hybrid structure of 56% over bulk, 11% over pyramid array and 8.5% over SiNWAs.

Third-harmonic-upconversion enhancement from a single semiconductor nanoparticle coupled to a plasmonic antenna.

The ability to convert low-energy quanta into a quantum of higher energy is of great interest for a variety of applications, including bioimaging, drug delivery and photovoltaics. Although high conversion efficiencies can be achieved using macroscopic nonlinear crystals, upconverting light at the nanometre scale remains challenging because the subwavelength scale of materials prevents the exploitation of phase-matching processes. Light-plasmon interactions that occur in nanostructured noble metals have offered alternative opportunities for nonlinear upconversion of infrared light, but conversion efficiency rates remain extremely low due to the weak penetration of the exciting fields into the metal. Here, we show that third-harmonic generation from an individual semiconductor indium tin oxide nanoparticle is significantly enhanced when coupled within a plasmonic gold dimer. The plasmonic dimer acts as a receiving optical antenna, confining the incident far-field radiation into a near field localized at its gap; the indium tin oxide nanoparticle located at the plasmonic dimer gap acts as a localized nonlinear transmitter upconverting three incident photons at frequency ω into a photon at frequency 3ω. This hybrid nanodevice provides third-harmonic-generation enhancements of up to 10(6)-fold compared with an isolated indium tin oxide nanoparticle, with an effective third-order susceptibility up to 3.5 × 10(3) nm V(-2) and conversion efficiency of 0.0007%. We also show that the upconverted third-harmonic emission can be exploited to probe the near-field intensity at the plasmonic dimer gap.

Mid-infrared plasmonic inductors: enhancing inductance with meandering lines.

We present a mid-infrared inductor that when applied to an extraordinary transmission hole array produces a strong redshift of the resonant peak accompanied by an unprecedented enlargement of the operation bandwidth. The importance of the result is twofold: from a fundamental viewpoint, the direct applicability of equivalent circuit concepts borrowed from microwaves is demonstrated, in frequencies as high as 17 THz upholding unification of plasmonics and microwave concepts and allowing for a simplification of structure design and analysis; in practical terms, a broadband funnelling of infrared radiation with fractional bandwidth and efficiency as high as 97% and 48%, respectively, is achieved through an area less than one hundredth the squared wavelength, which leads to an impressive accessible strong field localization that may be of great interest in sensing applications.

Terahertz wave transmission in flexible polystyrene-lined hollow metallic waveguides for the 2.5-5 THz band.

A low-loss and low-dispersive optical-fiber-like hybrid HE11 mode is developed within a wide band in metallic hollow waveguides if their inner walls are coated with a thin dielectric layer. We investigate terahertz (THz) transmission losses from 0.5 to 5.5 THz and bending losses at 2.85 THz in a polystyrene-lined silver waveguides with core diameters small enough (1 mm) to minimize the number of undesired modes and to make the waveguide flexible, while keeping the transmission loss of the HE11 mode low. The experimentally measured loss is below 10 dB/m for 2 < ν < 2.85 THz (~4-4.5 dB/m at 2.85 THz) and it is estimated to be below 3 dB/m for 3 < ν < 5 THz according to the numerical calculations. At ~1.25 THz, the waveguide shows an absorption peak of ~75 dB/m related to the transition between the TM11-like mode and the HE11 mode. Numerical modeling reproduces the measured absorption spectrum but underestimates the losses at the absorption peak, suggesting imperfections in the waveguide walls and that the losses can be reduced further.

Terahertz epsilon-near-zero graded-index lens.

An epsilon-near-zero graded-index converging lens with planar faces is proposed and analyzed. Each perfectly-electric conducting (PEC) waveguide comprising the lens operates slightly above its cut-off frequency and has the same length but different cross-sectional dimensions. This allows controlling individually the propagation constant and the normalized characteristic impedance of each waveguide for the desired phase front at the lens output while Fresnel reflection losses are minimized. A complete theoretical analysis based on the waveguide theory and Fermat's principle is provided. This is complemented with numerical simulation results of two-dimensional and three-dimensional lenses, made of PEC and aluminum, respectively, and working in the terahertz regime, which show good agreement with the analytical work.