Hybrid Materials and Nanocomposites as Multifunctional Biomaterials.

This review article provides an overview of hybrid and nanocomposite materials used as biomaterials in nanomedicine, focusing on applications in controlled drug delivery, tissue engineering, biosensors and theranostic systems. Special emphasis is placed on the importance of tuning the properties of nanocomposites, which can be achieved by choosing appropriate synthetic methods and seeking synergy among different types of materials, particularly exploiting their nanoscale nature. The challenges in fabrication for the nanocomposites are highlighted by classifying them as those comprising solely inorganic phases (inorganic/inorganic hybrids), organic phases (organic/organic hybrids) and both types of phases (organic/inorganic hybrids). A variety of examples are given for applications from the recent literature, from which one may infer that significant developments for effective use of hybrid materials require a delicate balance among structure, biocompatibility, and stability.

Hybrid magnetic scaffolds: The role of scaffolds charge on the cell proliferation and Ca2+ ions permeation.

Magnetic scaffolds with different charge densities were prepared using magnetic nanoparticles (MNP) and xanthan gum (XG), a negatively charged polysaccharide, or hydroxypropyl methylcellulose (HPMC), an uncharged cellulose ether. XG chains were crosslinked with citric acid (cit), a triprotic acid, whereas HPMC chains were crosslinked either with cit or with oxalic acid (oxa), a diprotic acid. The scaffolds XG-cit, HPMC-cit and HPMC-oxa were characterized by scanning electron microscopy (SEM), inductively coupled plasma atomic emission spectroscopy (ICP-AES), superconducting quantum interference device (SQUID) magnetometry, contact angle and zeta-potential measurements. In addition, the flux of Ca2+ ions through the scaffolds was monitored by using a potentiometric microsensor. The adhesion and proliferation of murine fibroblasts (NIH/3T3) on XG-cit, XG-cit-MNP, HPMC-cit, HPMC-cit-MNP, HPMC-oxa and HPMC-oxa-MNP were evaluated by MTT assay. The magnetic scaffolds presented low coercivity (<25Oe). The surface energy values determined for all scaffolds were similar, ranging from 43mJm-2 to 46mJm-2. However, the polar component decreased after MNP incorporation and the dispersive component of surface energy increased in average 1mJm-2 after MNP incorporation. The permeation of Ca2+ ions through XG-cit-MNP was significantly higher in comparison with that on XG-cit and HPMC-cit scaffolds, but through HPMC-cit-MNP, HPMC-oxa and HPMC-oxa-MNP scaffolds it was negligible within the timescale of the experiment. The adhesion and proliferation of fibroblasts on the scaffolds followed the trend: XG-cit-MNP>XG-cit>HPMC-cit, HPMC-cit-MNP, HPMC-oxa, HPMC-oxa-MNP. A model was proposed to explain the cell behavior stimulated by the scaffold charge, MNP and Ca2+ ions permeation.

Advanced fibroblast proliferation inhibition for biocompatible coating by electrostatic layer-by-layer assemblies of heparin and chitosan derivatives.

Heparin and different chitosan derivatives were applied to produce stable electrostatic layer-by-layer assemblies and further used as coating technique to inhibit natural inflammatory response to implants. Heparin was assembled with chitosan and N-methylated chitosan derivatives, namely N,N-dimethyl chitosan (DMC) and N,N,N-trimethyl chitosan (TMC), by dipping method. DMC and TMC (chitosan derivatives) were synthesized and characterized before LbL assembly. Ellipsometry, quartz crystal microbalance (QCM-D), and contact angle were used to demonstrate the deposition of polyelectrolyte multilayers onto silicon wafers using polyelectrolyte solutions with different ionic strength. The biological properties of these films were evaluated by cell culture assays using NIH/3T3 fibroblast cells. LbL assemblies of Heparin and chitosan derivatives showed to be biocompatible, and at the same time they strongly hinder the proliferation speed of fibroblasts up to 40-fold factors. Therefore, the multilayers prepared from heparin and chitosan derivatives have good features to be used as an alternative coating treatment for biomedical implants with reduced body rejection properties.

Layer-by-Layer assembled growth factor reservoirs for steering the response of 3T3-cells.

Layer-by-Layer (LbL) assemblies of heparin (Hep) and chitosan (Chi) were prepared for use as reservoirs for acidic and basic fibroblast growth factors (aFGFs and bFGFs, respectively). The effects of the architecture and composition of the reservoirs on the viability and proliferation of NIH-3T3 fibroblast cells were studied under starvation conditions. The reservoir stability was monitored by ellipsometry. The aFGF and bFGF loadings were determined using a dissipation-enhanced quartz crystal microbalance (QCM-D). Stability and release assays were performed in a phosphate buffer at physiological conditions. The results demonstrated that the amount of aFGF and bFGF loaded into and released from LbL reservoirs composed of 3 and 6 layer pairs could be controlled. Cell culture assays in low serum culture medium (LSCM) demonstrated that incorporating very small amounts of aFGF and bFGF into the (Hep/Chi)n multilayers significantly improved the proliferation of the NIH-3T3 fibroblasts. The cells did not proliferate on (Hep/Chi)n assemblies prepared in the absence of FGF under identical conditions. The LbL reservoirs were highly effective for the long-term storage (up to 9 months) of aFGF and bFGF. This work demonstrates the potential of LbL reservoirs for use as biomaterial coatings.

Antimicrobial particles from emulsion polymerization of methyl methacrylate in the presence of quaternary ammonium surfactants.

The purpose of this Article is to characterize polymeric particles of poly(methylmethacrylate) (PMMA) synthesized in the presence of one of two different quaternary ammonium surfactants (QACs): cetyltrimethylammonium bromide (CTAB) or dioctadecyldimethylammonium bromide (DODAB). The methods used are dynamic light scattering for sizing, polydispersity and zeta potential analysis, scanning electron microscopy (SEM) for morphology visualization, and plating plus colony-forming unities (CFU) counting for the determination of antimicrobial activity. The results point out the high QAC concentration required to obtain cationic and bioactive antimicrobial particles with good colloidal stability and a permanent load of the polymeric network with QACs. Over a range of micromolar QAC concentrations, there is remarkable antimicrobial activity of PMMA/CTAB or PMMA/DODAB particles, which is much higher than those determined for the QACs by themselves. Loading the biocompatible polyacrylate particles with QACs is a facile, fast, low-cost approach to obtaining highly efficient antimicrobial nanoparticles.

Assembly of horseradish peroxidase within supported cationic bilayers.

The interaction between horseradish peroxidase (HRP) and dioctadecyldimethylammonium bromide (DODAB) bilayers supported on polystyrene microspheres (PSS) or on flat silicon wafers was evaluated from the following techniques: (1) dynamic light-scattering for determining size distributions, zeta-potentials and polydispersities for dispersions; (2) spectrophotometric determination of HRP concentration in supernatants of centrifuged mixtures; (3) in situ ellipsometry for mean thickness of deposited layers on wafers; (4) kinetics of product appearance for oxidation of 2,2'-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid by H(2) O(2) in presence of free or immobilized enzyme. HRP incorporation (3.0 mg/m(2)) did not alter mean diameter and zeta-potential of PSS/DODAB particles but reduced enzyme activity by 50%, though activity persisted after several rinsing steps. In situ ellipsometry could not detect any HRP layer on top of the DODAB bilayer. HRP insertion in the bilayer core explained all results for both systems. Useful biotechnological applications are anticipated for such assemblies.

Immobilized horseradish peroxidase as a reusable catalyst for emulsion polymerization.

The study on the adsorption of horseradish peroxidase (HRP) onto silicon wafers was carried out by means of in situ ellipsometry, atomic force microscopy (AFM) and contact angle measurements. A smooth HRP layer adsorbed onto Si wafers. The enzymatic activity of free or adsorbed HRP was determined by the oxidation of 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and by the emulsion polymerization of ethylene glycol dimethacrylate (EGDMA). Upon adsorbing, HRP molecules might have undergone some conformational changes, which caused a small reduction of enzymatic activity in comparison to that observed for HRP solution. However, it was possible to reuse the same HRP-covered Si wafer as catalyst in the polymerization of EGDMA three times.