Techno-economic analysis of ion concentration polarization desalination for high salinity desalination applications.

A techno-economic analysis is used to evaluate the economic feasibility of ion concentration polarization (ICP) desalination for seawater desalination and brine management. An empirical optimization model based on a limited set of experimental data, which was obtained from a lab-scale ICP desalination prototype, was established to calculate the required energy and membrane area for a given set of operating parameters. By calculating operating and capital expenses in various feed and product cases, the optimal levelized cost of water is determined over a range of feed salinities, mostly above seawater salinity (35 g/kg). Through these analyses, we study the economic feasibility of three applications: 1) partial desalination of brine discharge by ICP (feed varied from 35 to 75 g/kg) to common seawater RO feed level (35 g/kg) in a hybrid ICP-RO system; 2) the concentration of seawater desalination brine for salt production, and 3) partial desalination of oilfield wastewater. The economic feasibility of ICP desalination processes has been evaluated and the rough cost of treatment has been generated for several relevant applications. The approach taken in this work could be employed for other new and existing desalination processes, where a priori process modeling and optimization is scientifically and/or numerically challenging.

Energy efficiency of batch and semi-batch (CCRO) reverse osmosis desalination.

As reverse osmosis (RO) desalination capacity increases worldwide, the need to reduce its specific energy consumption becomes more urgent. In addition to the incremental changes attainable with improved components such as membranes and pumps, more significant reduction of energy consumption can be achieved through time-varying RO processes including semi-batch processes such as closed-circuit reverse osmosis (CCRO) and fully-batch processes that have not yet been commercialized or modelled in detail. In this study, numerical models of the energy consumption of batch RO (BRO), CCRO, and the standard continuous RO process are detailed. Two new energy-efficient configurations of batch RO are analyzed. Batch systems use significantly less energy than continuous RO over a wide range of recovery ratios and source water salinities. Relative to continuous RO, models predict that CCRO and batch RO demonstrate up to 37% and 64% energy savings, respectively, for brackish water desalination at high water recovery. For batch RO and CCRO, the primary reductions in energy use stem from atmospheric pressure brine discharge and reduced streamwise variation in driving pressure. Fully-batch systems further reduce energy consumption by not mixing streams of different concentrations, which CCRO does. These results demonstrate that time-varying processes can significantly raise RO energy efficiency.