ABSTRACT
This study investigates the effect of renewable formulations based on tall oil bio-refinery products on the water vapor sorption and interfiber strength of cellulosic fibers as well as on the properties of high-density fiberboard (HDF) panels. The results obtained for HDF prepared using renewable formulations were compared to the results for HDF obtained using conventional synthetic paraffin wax (hydrowax), which is the hydrophobic agent currently utilized by the industry. Four tall oil distillation products (TODPs) with different levels of fatty and rosin acids were used for preparing the hydrophobic formulations with furfuryl alcohol as an organic solvent. According to determinations with an automated vapor sorption apparatus, the formulations had a similar effect with hydrowax on the sorption behavior of natural fibers. Unlike to hydrowax treatment, the ultimate tensile strength of cellulosic paper-sheets treated with the formulations remained unchanged or significantly increased. At the standard addition load of 1% (wt/wt dry fibers) of the formulations, HDF panels showed comparable and only in one case, e.g., TODP3-based formulation, slightly higher thickness swelling (24 h) than those with hydrowax. The best performing formulation (TODP2-based) in terms of tensile strength of paper sheets did not significantly change the mechanical properties of HDF panels in both standard climate and high humid conditions. Promising results at the standard and humid climate conditions were obtained for HDF panels manufactured with higher TODP2-based formulation amounts (3-5%) and reduced melamine-urea-formaldehyde resin content (10-12% instead of 14%, wt dry resin/wt dry fibers).
ABSTRACT
Amorphous titanium hydroxyphosphate with formula Ti(OH)(1.36)(HPO(4))(1.32).2.3H(2)O and a new silica-modified titanium hydroxyphosphate with a general formula Ti(OH)(2x)(HPO(4))(2-x).ySiO(2).nH(2)O are synthesized and characterized using IR, TG, XRD, SEM, solid-state NMR, and BET techniques. It is concluded that SiO(2) is evenly distributed within the titanium phosphate (TiP) agglomerates and that neither the separate silica phase nor the titanium silicates are formed during the synthesis of silica-modified titanium hydroxyphosphate. Correlations between the texture, ion-exchange properties of the amorphous titanium hydroxyphosphate, and the amount of SiO(2) present within the TiP matrix are established. Sorption properties of silica-modified titanium hydroxyphosphate toward Cs(+) and Sr(2+) are studied in a series of samples with an increasing amount of silica, at different pH, and in NaCl solutions with a varying ionic strength. It is found that sorption of Cs(+) does not depend practically on the amount of SiO(2) present, whereas the Sr(2+) uptake drastically decreases with an increase of silica amount. The effects of pH and of the electrolyte concentration on the sorption behavior of titanium phosphate are discussed in terms of ionic hydration shell and titanium phosphate structural specificity. The kinetics of sorption processes is also investigated, and the diffusion coefficients for cesium and strontium are obtained.
