Optical Response of PDMS Surface Diffraction Gratings under Exposure to Volatile Organic Compounds.

Monitoring volatile organic compounds (VOCs) in indoor air is significantly gaining importance due to their adverse effects on human health. Among the diverse detection methods is optical sensing, which employs materials sensitive to the presence of gases in the environment. In this work, we investigate polydimethylsiloxane (PDMS), one of the materials utilized for gas sensing, in a novel transducer: a surface relief diffraction grating. Upon adsorption of the volatile analyte, the PDMS grating swells, and its refractive index changes; both effects lead to increased diffraction efficiency in the first diffraction order. Hence, the possibility of VOC detection emerges from the measurement of the optical power transmitted or diffracted by the grating. Here, we investigated responses of PDMS gratings with varying surface profile properties upon exposure to VOCs with different polarities, i.e., ethanol, n-butanol, toluene, chloroform, and m-xylene, and compared their response in the context of the Hansen theory of solubility. We also studied the response of the grating with a 530 nm deep surface profile to different concentrations of m-xylene, showing a sensitivity and limit of detection of 0.017 µW/ppm and 186 ppm, respectively. Structures in the PDMS were obtained as copies of sinusoidal surface gratings fabricated holographically in acrylamide photopolymer and revealed good sensing repeatability, reversibility, and a fast response time. The proposed sensing technique can be directly adopted as a simple method for VOC detection or can be further improved by implementing a functional coating to significantly enhance the sensitivity and selectivity of the device.

Comparison of holographic recording options for reflection-format and transmission-format coupler-type diffractive optical elements: theoretical exploration and experimental validation.

The holographic recording of gratings that have very large diffraction angles and/or slants is challenging because recording requires beam angles that are not possible without the use of prisms. However, by using a recording wavelength that is different from (usually shorter than) the intended operating wavelength, it is possible to record with less challenging beam angles. In this paper, a recently developed model that allows systematic investigation of the potential and limits of this wavelength-shift recording technique is extended to include a reflection format. Transmission and reflection recording options are compared systematically for the first time, and it is shown that in reflection recording, some couplers can be recorded more easily when the recording wavelength is longer than the operating wavelength. This opens up new design options for previously challenging regions of the spectrum. Experimental validation of the reflection version of the model is carried out by holographic recording in reflection mode at 532 nm in Bayfol HX 200 photopolymer, demonstrating the coupling of blue light.

Holographic Recording of Unslanted Volume Transmission Gratings in Acrylamide/Propargyl Acrylate Hydrogel Layers: Towards Nucleic Acids Biosensing.

The role of volume hydrogel holographic gratings as optical transducers in sensor devices for point-of-care applications is increasing due to their ability to be functionalized for achieving enhanced selectivity. The first step in the development of these transducers is the optimization of the holographic recording process. The optimization aims at achieving gratings with reproducible diffraction efficiency, which remains stable after reiterative washings, typically required when working with analytes of a biological nature or several step tests. The recording process of volume phase transmission gratings within Acrylamide/Propargyl Acrylate hydrogel layers reported in this work was successfully performed, and the obtained diffraction gratings were optically characterized. Unslanted volume transmission gratings were recorded in the hydrogel layers diffraction efficiencies; up to 80% were achieved. Additionally, the recorded gratings demonstrated stability in water after multiple washing steps. The hydrogels, after functionalization with oligonucleotide probes, yields a specific hybridization response, recognizing the complementary strand as demonstrated by fluorescence. Analyte-sensitive hydrogel layers with holographic structures are a promising candidate for the next generation of in vitro diagnostic tests.

Color-Changing Reflection Hologram for Quality Assurance of Therapeutic Ultrasound Systems.

The acoustic output of clinical therapeutic ultrasound equipment requires regular quality assurance (QA) testing to ensure the safety and efficacy of the treatment and that any potentially harmful deviations from the expected output power density are detected as soon as possible. A hologram, consisting of a reflection grating fabricated in an acrylate photopolymer film, has been developed to produce an immediate, visible, and permanent change in the color of the reconstructed hologram from red to green in response to incident ultrasound energy. The influence of the therapeutic ultrasound insonation parameters (exposure time, ultrasound power density, and proximity to the point of maximum acoustic pressure) on the hologram's response has been investigated for two types of therapeutic ultrasound systems: a sonoporation system and an ultrasound physiotherapy system. Findings show that, above a switching temperature of 45 °C, the ultrasound-induced temperature rise produces a structural change in the hologram, which manifests as a visible color change. The area of the color change region correlates with the ultrasound exposure conditions. The suitability of the hologram as a simple and quick QA test tool for therapeutic ultrasound systems has been demonstrated. A prototype ultrasound testing unit which facilitates user-friendly, reproducible testing of the holograms in a clinical setting is also reported.

The Development of Optomechanical Sensors-Integrating Diffractive Optical Structures for Enhanced Sensitivity.

The term optomechanical sensors describes devices based on coupling the optical and mechanical sensing principles. The presence of a target analyte leads to a mechanical change, which, in turn, determines an alteration in the light propagation. Having higher sensitivity in comparison with the individual technologies upon which they are based, the optomechanical devices are used in biosensing, humidity, temperature, and gases detection. This perspective focuses on a particular class, namely on devices based on diffractive optical structures (DOS). Many configurations have been developed, including cantilever- and MEMS-type devices, fiber Bragg grating sensors, and cavity optomechanical sensing devices. These state-of-the-art sensors operate on the principle of a mechanical transducer coupled with a diffractive element resulting in a variation in the intensity or wavelength of the diffracted light in the presence of the target analyte. Therefore, as DOS can further enhance the sensitivity and selectivity, we present the individual mechanical and optical transducing methods and demonstrate how the DOS introduction can lead to an enhanced sensitivity and selectivity. Their (low-) cost manufacturing and their integration in new sensing platforms with great adaptability across many sensing areas are discussed, being foreseen that their implementation on wider application areas will further increase.

Development and Evaluation of a Multifrequency Ultrafast Doppler Spectral Analysis (MFUDSA) Algorithm for Wall Shear Stress Measurement: A Simulation and In Vitro Study.

Cardiovascular pathology is the leading cause of death and disability in the Western world, and current diagnostic testing usually evaluates the anatomy of the vessel to determine if the vessel contains blockages and plaques. However, there is a growing school of thought that other measures, such as wall shear stress, provide more useful information for earlier diagnosis and prediction of atherosclerotic related disease compared to pulsed-wave Doppler ultrasound, magnetic resonance angiography, or computed tomography angiography. A novel algorithm for quantifying wall shear stress (WSS) in atherosclerotic plaque using diagnostic ultrasound imaging, called Multifrequency ultrafast Doppler spectral analysis (MFUDSA), is presented. The development of this algorithm is presented, in addition to its optimisation using simulation studies and in-vitro experiments with flow phantoms approximating the early stages of cardiovascular disease. The presented algorithm is compared with commonly used WSS assessment methods, such as standard PW Doppler, Ultrafast Doppler, and Parabolic Doppler, as well as plane-wave Doppler. Compared to an equivalent processing architecture with one-dimensional Fourier analysis, the MFUDSA algorithm provided an increase in signal-to-noise ratio (SNR) by a factor of 4-8 and an increase in velocity resolution by a factor of 1.10-1.35. The results indicated that MFUDSA outperformed the others, with significant differences detected between the typical WSS values of moderate disease progression (p = 0.003) and severe disease progression (p = 0.001). The algorithm demonstrated an improved performance for the assessment of WSS and has potential to provide an earlier diagnosis of cardiovascular disease than current techniques allow.

Improving the Angular Visibility of Photopolymer-Based Reflection Holograms for Sensing Applications.

Volume reflection hologram-based sensors are designed to visibly change colour in response to a target stressor or analyte. However, reflection holograms fabricated in thick photopolymer films are highly angularly selective, making these sensors challenging to view and interpret by non-experts. Here, the use of speckle holography to improve the visibility of reflection holograms is presented. A novel recording approach combining speckle recording techniques with Denisyuk reflection recording geometry is described. The recorded speckle reflection grating operates as a series of multiplexed reflection gratings with a range of spatial frequencies, capable of reflecting light at a wider range of angles. A comparative study of the angular and wavelength selectivity of speckle and standard reflection gratings was conducted. The FWHM of the angular selectivity curves of the speckle reflection gratings is doubled (4°) in comparison to standard 4500 lines/mm reflection gratings (2°). The wavelength selectivity FWHM is also doubled from 4.2 to 8.6 nm. The comparative ability of the speckle and standard reflection gratings to act as colour-changing compressional pressure sensors in the 0.88-5.31 MPa range is described. Finally, we present a prototype reflection hologram viewer which enables the easy observation of angularly specific reflection holograms by non-experts.

A Magnetic Nanoparticle-Doped Photopolymer for Holographic Recording.

Functionalised holograms are important for applications utilising smart diffractive optical elements for light redirection, shaping and in the development of sensors/indicators. This paper reports on holographic recording in novel magnetic nanocomposites and the observed temperature change in dry layers and liquid samples exposed to alternating magnetic field (AMF). The nanocomposite consists of N-isopropylacrylamide (NIPA)-based polymer doped with magnetic nanoparticles (MNPs), and local heating is achieved through magnetic induction. Here, volume transmission holographic gratings (VTHGs) are recorded with up to 24% diffraction efficiency (DE) in the dry layers of magnetic nanocomposites. The dry layers and liquid samples are then exposed to AMF. Efficient heating was observed in the liquid samples doped with Fe3O4 MNPs of 20 nm average size where the temperature increased from 27 °C to 64 °C after 300 s exposure to 111 mT AMF. The temperature increase in the dry layers doped with the same nanoparticles after exposure to 4.4 mT AMF was observed to be 6 °C. No temperature change was observed in the undoped layers. Additionally, we have successfully recorded Denisyuk holograms in the magnetic nanocomposite materials. The results reveal that the magnetic nanocomposite layers are suitable for recording holograms and need further optimisation in developing holographic indicators for mapping AMFs.

Cantilever-Based Sensor Utilizing a Diffractive Optical Element with High Sensitivity to Relative Humidity.

High-sensitivity and simple, low-cost readout are desirable features for sensors independent of the application area. Micro-cantilever sensors use the deflection induced by the analyte presence to achieve high-sensitivity but possess complex electronic readouts. Current holographic sensors probe the analyte presence by measuring changes in their optical properties, have a simpler low-cost readout, but their sensitivity can be further improved. Here, the two working principles were combined to obtain a new hybrid sensor with enhanced sensitivity. The diffractive element, a holographically patterned thin photopolymer layer, was placed on a polymer (polydimethylsiloxane) layer forming a bi-layer macro-cantilever. The different responses of the layers to analyte presence lead to cantilever deflection. The sensitivity and detection limits were evaluated by measuring the variation in cantilever deflection and diffraction efficiency with relative humidity. It was observed that the sensitivity is tunable by controlling the spatial frequency of the photopolymer gratings and the cantilever thickness. The sensor deflection was also visible to the naked eye, making it a simple, user-friendly device. The hybrid sensor diffraction efficiency response to the target analyte had an increased sensitivity (10-fold when compared with the cantilever or holographic modes operating independently), requiring a minimum upturn in the readout complexity.

Birefringent optofluidic gratings.

A set of parallel microfluidic channels behaving as a diffraction grating operating in the Raman-Nath regime has been fabricated and studied. The diffraction efficiency of such structure can be tuned by selecting a liquid with a particular refractive index and/or optical anisotropy. Alternatively the optical properties of the liquid can be characterised by measuring the diffraction efficiency and the state of polarization of the diffracted beam. In this work, the microfluidic channels under study have been filled with penicillin molecules dissolved in water. Due to the chirality of the penicillin, the liquid has been found to have circular birefringence of 2.14 × 10-7. The addition of the anisotropic liquid modifies the polarization properties of the microfluidic diffraction grating. The diffraction efficiency of the grating has been characterised for different probe beam wavelengths and states of polarization. Currently the diffraction efficiency of the device is low - 1.7%, but different approaches for its improvement have been discussed.

Study of the Effect of Methyldiethanolamine Initiator on the Recording Properties of Acrylamide Based Photopolymer.

The use of Holographic Optical Elements (HOEs) in applications, such as in light shaping and redirection, requires certain characteristics such as a high Diffraction Efficiency, low angular selectivity and stability against UV damage. In order to maximize the performance of the HOEs, photosensitive materials are needed that have been optimised for the characteristics that are of particular importance in that application. At the core of the performance of these devices is the refractive index modulation created during holographic recording. Typically, a higher refractive index modulation will enable greater light Diffraction Efficiency and also operation with thinner devices, which in turn decreases the angular selectivity and the stability of the refractive index modulation introduced during recording, which is key to the longevity of the device. Solar concentrators based on volume HOEs can particularly benefit from thinner devices, because, for a solar concentrator to have a high angular working range, thinner photopolymer layers with a smaller angular selectivity are required. This paper presents an optimisation of an acrylamide-based photopolymer formulation for an improved refractive index modulation and recording speed. This was achieved by studying the effect of the concentration of acrylamide and the influence of different initiators in the photopolymer composition on the diffraction efficiency of holographic gratings. Two initiators of different molecular weights were compared: triethanolamine (TEA) and methyldiethanolamine (MDEA). A fivefold increase in the rate of grating formation was achieved through the modification of the acrylamide concentration alone, and it was also found that holograms recorded with MDEA as the initiator performed the best and recorded up to 25% faster than a TEA-based photopolymer. Finally, tests were carried out on the stability of the protected and unprotected photopolymer layers when subjected to UV light. The properties exhibited by this photopolymer composition make it a promising material for the production of optical elements and suitable for use in applications requiring prolonged exposure to UV light when protected by a thin melinex cover.

Polyvinyl alcohol cryogel based vessel mimicking material for modelling the progression of atherosclerosis.

PURPOSE: The stiffness of Polyvinyl-alcohol cryogel can be adjusted through application of consecutive freeze-thaw cycles. This material has potential applications in the production of tissue mimicking phantoms in diagnostic ultrasound. The aim of this study was to use PVA-c to produce a range of geometrically and acoustically identical vessel phantoms modelling stages of atherosclerosis which could be verified through mechanical testing, thus allowing for more precision in quantitative in-vitro flow analysis of atherosclerosis. METHODS: A series of anatomically realistic walled renal artery flow phantoms were constructed using PVA-c. In order to ensure precise modelling of atherosclerosis, a modified procedure of ISO27:2017 was used to compare the mechanical properties of PVA-c. Results were compared for the standard "dumbbell" test object and a modified vessel test object. The geometric accuracy and reproducibility of the vessel models were tested before and after implantation in flow phantoms. RESULTS: No significant difference was found between the mechanical properties of the dumbbell test samples and the vessels for any number of freeze thaw cycles, with a correlation coefficient of R2 = 0.9767 across the dataset, indicating that a direct comparison between the mechanical properties of the dumbbell test samples and the phantom vessels was established. The geometric reproducibility showed that before and after implantation there was no significant difference between individual vessel geometries (p = 0.337 & p = 0.176 respectively). CONCLUSIONS: Polyvinyl-alcohol cryogel is a useful material for the production of arterial flow phantoms. Care should be taken when using this material to ensure its mechanical properties have been correctly characterised. The guidelines of ISO37:2017 potentially provide the best procedure to ensure this.

Investigation of the assessment of low degree (<50%) renal artery stenosis based on velocity flow profile analysis using Doppler ultrasound: An in-vitro study.

PURPOSE: Renal arterial stenosis can lead to disrupted renal function due to reduced blood flow to the kidneys and is largely thought to be caused by atherosclerosis. Current diagnostic strategies for renal arterial stenosis rely on detecting large degree stenoses (>50%). This study aimed to test the viability of using Doppler ultrasound to assess velocity profiles to detect the presence of low degree (<50%) stenoses. METHODS: A series of anatomically realistic renal artery flow phantoms were constructed exhibiting a range of low degree stenoses (symmetric and asymmetric). The behaviour of fluid flow in the phantoms was examined using Doppler ultrasound and analysed to calculate the clinical biomarker, wall shear stress. RESULTS: A number of fluid behaviours were observed in relation to stenosis degree: asymmetric stenoses tended to result in a skewing of peak velocities away from the centre of the vessel towards the outer wall, the magnitude of increase in velocity was observed to correlate with stenosis degree, and the wall shear stress curves observed large peaks in the presence of even the lowest degree stenosis (20%). CONCLUSIONS: Doppler ultrasound could potentially be utilised to diagnose low degree stenoses in a clinical setting. Doppler ultrasound in conjunction with wall shear stress analysis in particular has significant potential in the diagnosis of renal artery stenosis.

Modified Surface Relief Layer Created by Holographic Lithography: Application to Selective Sodium and Potassium Sensing.

Point-of-care diagnostics will rely upon the development of low-cost, noncomplex, and easily integrated systems in order to examine biological samples such as blood and urine obtained from the patient. The development of metal ion sensors is a subject of significant relevance for physiological samples. The level of different blood electrolytes, mainly H⁺, Na⁺, K⁺ and Cl- is considerably used to monitor irregular physiologies. The particular challenge in biosensing, and in fact for any other sensor, is signal differentiation between non-specifically bound material and the specific detecting of the target molecule/ion. The biosensors described in this paper are fabricated by a holographic recording of surface relief structures in a photopolymer material. The surface structures are modified by coating with either dibenzo-18-crown-6 (DC) or tetraethyl 4-tert-butylcalix[4]arene (TBC), which are embedded in a polymer matrix. Interrogation of these structures by light allows indirect measurement of the concentration of the analyte. The influence of polymer matrices with different porosities, plasticised polyvinyl chloride (PVC) and a sol-gel matrix, on the performance of the sensors for detection of K⁺ and Na⁺ is examined. Here we demonstrate a proof of concept that by using a matrix with higher porosity one can increase the sensitivity of the sensor. The results showed that the DC sensing layer provides a selective response to K⁺ over Na⁺ and the TBC modified grating is more responsive to Na⁺ over K⁺. The sensor responds to K⁺ and Na⁺ within the physiological concentration ranges.

Development of a photopolymer holographic lens for collimation of light from a green light-emitting diode.

A holographic optical element (HOE) was developed to collimate a monochromatic light-emitting diode (LED). The fabrication was achieved by the interference of collimated and diverging beams from a 532 nm laser to produce the required photonic structure in a self-developing photopolymer material. The experimental values of diffraction efficiency and spatial period across the HOE were compared with their expected theoretical values. Good agreement was found for the spatial period; however, the diffraction efficiency varied significantly across the lens. In this paper, two approaches have been taken to address this variation: (1) modification of recording geometry and (2) optimization of recording intensity and exposure time at constant energy. The performance of an optimized HOE (cylindrical holographic lens) was then demonstrated using a 532 nm laser beam. The optimized conditions for the cylindrical holographic lens were used to fabricate a spherical holographic lens of the same numerical aperture for LED applications. This type of lens has the potential to be used in combination with LED sources.

Self-processing photopolymer materials for versatile design and fabrication of holographic sensors and interactive holograms.

The aim of this paper is to discuss the benefits as well as the limitations of utilizing photopolymer materials in the design of holograms that are responsive to changes in their environment, such as changes in the concentration of a specific substance, temperature, and pressure. Three different case studies are presented, including both surface and volume phase holograms, in order to demonstrate the flexibility in the approach of utilizing holographic photopolymers for the design of sensors and interactive optical devices. First, a functionalized surface relief hologram is demonstrated to operate as an optical sensor for the detection of metal ions in water. The sensitivity and selectivity of the sensor are investigated. The second example demonstrates a volume transmission hologram recorded in a temperature-sensitive photopolymer and the memory effects of its exposure to elevated temperature. Finally, a pressure-sensitive reflection hologram that changes color under application of pressure is characterized, and its potential application in document authentication is described.

Serialized holography for brand protection and authentication.

The problems presented by counterfeit products and documentation are discussed. Limitations of existing holograms for anti-counterfeit applications are described. We describe the advantages of full holographic serialization and the requirements in terms of materials and techniques for mass production of true serialized holograms. These requirements having been met, we report for the first time the mass production of fully serialized holograms. The novelty of the approach consists of the direct use of the product manufacturer's information as the object in a holographic recording system along with a self-processing photopolymer and modular optical system to facilitate mass production of truly serialized volume holograms. Various types of serialized holograms for overt and covert authentication are described. We discuss briefly the application of Optrace's manufacturing methods for future generation holographic devices.

Holographic beam-shaping diffractive diffusers fabricated by using controlled laser speckle.

A method for fabricating diffractive holographic optical diffusers is reported, allowing a high degree of control of the resulting diffuser characteristics. The method consists of recording a laser speckle pattern using a single carrier beam, with controlled speckle size and shape, in an acrylamide-based volume photopolymer. The multiple interferences that create the speckle pattern form the hologram. Results are presented verifying the diffusers are volume holographic in nature and the speckle pattern is recorded accurately in the photopolymer. Diffusers recorded by this method are analysed to characterise the optical performance of the diffusers and to illustrate their beam-shaping capabilities, particularly in producing asymmetric beam outputs.

N-isopropylacrylamide-based photopolymer for holographic recording of thermosensitive transmission and reflection gratings.

In recent years, functionalized photopolymer systems capable of holographic recording are in great demand due to their potential use in the development of holographic sensors. This work presents a newly developed N-isopropylacrylamide (NIPA)-based photopolymer for holographic recording in reflection and transmission modes. The optimized composition of the material is found to reach refractive index modulation of up to 5×10-3 and 1.6×10-3 after recording in transmission and reflection mode, respectively. In addition to fulfilling the requirements for holographic recording materials, the NIPA-based photopolymer is sensitive to temperature and has lower toxicity than acrylamide-based photopolymers. Possible application of the NIPA-based photopolymer in the development of a holographic temperature sensor is discussed.

Application of phase shifting electronic speckle pattern interferometry in studies of photoinduced shrinkage of photopolymer layers.

Photoinduced shrinkage occurring in photopolymer layers during holographic recording was determined by phase shifting electronic speckle pattern interferometry. Phase maps were calculated from the changes in intensity at each pixel due to the phase differences introduced between object and reference beams. Shrinkage was then obtained from the changes in phase as recording proceeded. The technique allows for whole field measurement of the dimensional changes in photopolymers during holographic recording.