ABSTRACT
Nowadays, there are more than fourteen major state and private owned textile industries and garment factories in Ethiopia. However, these textile effluents are directly discharged without treatment to the surrounding environment, as a result, the pollutants bring serious problem to the surrounding community including health such as skin diseases, asthma, abortion, carcinogenic effect, biodiversity loss and mutagenic effect on the. The main objective of this study is characterization and treatment of the textile effluent using aluminum electrodes in the electrocoagulation process. EC experimental setups were designed and different parameters were optimized. Electrocoagulation treatment process eliminates physicochemical quality indicators such as pH, electrical conductivity (EC); turbidity, biological oxygen demand (BOD), ammonia; nitrate, nitrite, total nitrogen (TN) and phosphate were determined using standard procedures. From the result, the maximum removal efficiency of phosphate, ammonia, TN, electrical conductivity, turbidity and BOD were obtained 97, 87, 88, 89, 99 and 66%, respectively. Analyses of the electrochemically generated sludge by X-ray Diffraction, Scanning Electron Microscope (SEM), and Fourier Transform Infrared Spectroscopy (FTIR) revealed that the expected crystalline aluminum oxides (bayerite (Al(OH)3 diaspore (AlO(OH)) were found in the sludge. The amorphous phase was also found in the floc. Therefore, a treatment technology was good and encourages the community to apply the technique for the treatment of textile effluent before discharging into the environment.