Effect of Bonding Agents on the Shear Bond Strength of Tooth-colored Restorative Materials to Dentin: An In Vitro Study.

AIM: The aim of the study is to determine the difference in the shear bond strengths to dentin among dental composite (Filtek Z350®, 3M), compomer (Dyract Flow®, Dentsply) and Giomer (Beautifil®, Shofu) with 3MTM Single BondTM Universal Adhesive (SBU) (7th generation, self-etch, single solution adhesive) and AdperTM Single Bond 2 Adhesive (ASB) (5th generation, total-etch, two solution adhesive). MATERIALS AND METHODS: Sixty extracted human permanent teeth were collected, cleansed of debris, and placed in distilled water. The samples were segregated into two groups depicting the two bonding agents-AdperTM (ASB) and 3MTM Single Bond Universal (SBU) and sub-grouped into three groups depicting the three restorative materials (Composite, Giomer, and Compomer) used. Groups were respresented as follows: Group I-ASB + Composite; Group II-ASB + Giomer; Group III-ASB + Compomer; Group IV-SBU + Giomer; Group V-SBU + Compomer; Group VI-SBU + Composite. After applying the bonding agent as per the manufacturer's instructions, following which the restorative material was placed. A Universal Testing Machine (Instron 3366, UK) was employed to estimate the shear bond strength of the individual restorative material and shear bond strengths were calculated. RESULTS: Composite bonded with SBU (group VI) displayed the greatest shear strength (11.16 ± 4.22 MPa). Moreover, Giomers and flowable compomers displayed better bond strengths with ASB compared with their SBU-bonded counterparts. CONCLUSION: These results mark the importance of careful material selection in clinical practice and the bonding agent used to achieve optimal bond strength and enhance the clinical longevity and durability of dental restorations. CLINICAL SIGNIFICANCE: From a clinical perspective, to avoid a compressive or a shear failure, it would be preferrable to use a direct composite restorative material with SBU (Single bond universal adhesive, 7th generation) to achieve maximum bond strength. How to cite this article: Kuchibhotla N, Sathyamoorthy H, Balakrishnan S, et al. Effect of Bonding Agents on the Shear Bond Strength of Tooth-colored Restorative Materials to Dentin: An In Vitro Study. J Contemp Dent Pract 2024;25(3):245-249.

Remineralization Potential of a Novel Biomimetic Material (Self-assembling Peptide P11-4) on Early Enamel Caries: An In Vitro Study.

AIM: To assess the remineralizing potential of self-assembling peptide P11-4 and compare it to the remineralizing potential of fluoride varnish using DIAGNOdentTM, as well as the amount of mineral gain after application of fluoride varnish and self-assembling peptide P11-4. MATERIALS AND METHODS: This study included 20 premolars extracted during orthodontic therapy with all surfaces intact and free of hypoplastic regions, white spot lesions (WSL) and dental caries. The teeth sample for Curodont RepairTM (self-assembling P11-4) and Bifluorid 10® (fluoride varnish) was equally divided. On each tooth surface, a 2 × 2 mm window was created. The samples were immersed in a demineralizing solution for 96 hours before being subjected to DIAGNOdentTM pen reading, ICDAS-II scoring, and scanning electron microscopy-energy-dispersive X-ray (SEM-EDX) analysis on one half of the sample. The remineralizing agents were applied to the second half of the sample according to the manufacturer's instructions and placed in artificial saliva for 21 days, with the artificial salvia being replaced every 24 hours. After 21 days, the second half of the sample was subjected to DIAGNOdentTM pen reading, ICDAS-II score, and SEM-EDX analysis. RESULTS: Following remineralization, the DIAGNOdentTM pen and ICDAS-II score values differed statistically between the two groups, with the Bifluorid 10® group reporting higher mean values (p > 0.05) using t-test analysis. Energy-dispersive X-ray analysis using the t-test revealed a statistically significant result for remineralization (p < 0.05), with CurodontTM Repair group (55.150.84) reporting better mean values than Bifluorid 10® for phosphorus and calcium, but Bifluorid 10® reporting a higher result in remineralization (p < 0.05) than CurodontTM Repair for fluoride. CONCLUSION: CurodontTM Repair showed better remineralizing potential compared with Bifluorid 10® varnish. In terms of the mineral gain, CurodontTM Repair showed better results for calcium and phosphorus post-remineralization. Whereas Bifluorid 10® showed a higher gain in terms of fluoride. Self-assembling peptide P11-4 can be used as an alternative to fluoride varnish for remineralizing WSL. CLINICAL SIGNIFICANCE: Self-assembling polypeptide P11-4 is a novel remineralizing agent for initial enamel lesions, which is the least-invasive method of enamel remineralization.

Mechanical Properties of SDR™ and Biodentine™ as Dentin Replacement Materials: An In Vitro Study.

AIM: The aim of this study is to evaluate the shear bond strength of nanohybrid composite resins (NCR) and microhybrid composite resins (MCR) placed over three different dentin replacement materials: SDR-Smart Dentin Replacement™, Biodentine™, and resin-modified glass ionomer cement (RMGIC). METHODS AND MATERIALS: Thirty acrylic blocks (50 mm × 20 mm × 15 mm), each with a central hole, were prepared, which were randomly distributed into three equal groups, each corresponding to one of the three dentin replacement materials-SDR, Biodentine, and RMGIC. The central holes were then filled with these materials. After setting and application of the respective adhesive system, the specimens were further divided into two subgroups each of NCR or MCR. The respective composite material was then applied to the dentin replacement materials using a cylindrical plastic matrix. Shear bond strength was tested on a universal testing machine (Instron 3366), at a crosshead speed of 1.0 mm/minute. RESULTS: SDR attained consistently higher shear bond strength (means: 21.18, 22.19 Mpa) values than RMGIC and Biodentine, with both types of composite resins (MCR and NCR), which were statistically significant (p <0.001). When considering the means of the shear bond strength measurements obtained by the two types of the composite resin, no significant difference (p <0.05) was found between them with all three types of dentin replacement materials. CONCLUSION: There is no significant difference in the bond strengths achieved between MCR and NCR to the different dentine replacement materials. Hence, either type of composite resin may be expected to achieve similar bond strengths to the underlying substrate. SDR™ is a suitable dentine replacement material for placing below a composite resin veneer as it can achieve immediate higher bond strengths. CLINICAL SIGNIFICANCE: SDR can be used as an effective bulk fill material in deep dentinal caries which can be capped with composite resins.

An In Vitro Evaluation of the Mechanical Properties and Fluoride-releasing Ability of a New Self-cure Filling Material.

AIM: The aim of this study was to examine and compare the flexural strength, shear bond strength, and fluoride-releasing ability of glass ionomer cement (GIC), Fuji IX GIC®, and a new alkasite filling material, Cention N®. MATERIAL AND METHODS: The materials were divided into two groups, Fuji IX GIC® (n = 30) and Cention N® (n = 30) and further divided (n = 10) to test three parameters, the fluoride releasing ability, flexural strength, and shear bond strength. Fluoride release was checked using fluoride ion-selective electrode, and flexural strength and shear bond strength were tested using universal testing machine (Intron 3366, UK). RESULTS: Fluoride release of Fuji IX GIC® was significantly higher compared to that of control Cention N® over a period of 21 days. Flexural strength of Cention N® was significantly higher compared to Fuji IX GIC® and there were no significant differences in shear bond strength of both the materials. CONCLUSION: From the results of the study, it can be concluded that Cention N® is an alkasite filling material for the complete and permanent replacement of tooth structure in posterior teeth and can be a good alternative when compared to GICs on the basis of their superior mechanical properties. CLINICAL SIGNIFICANCE: Cention N® is an innovative filling material for the complete and permanent replacement of tooth structure in posterior teeth and can be a good alternative when compared to GICs on the basis of their superior mechanical properties.

Plaque Removal Efficiency of Chewable Toothbrushes among 10-12-yearold Children: A Randomized Control Trial.

AIM AND OBJECTIVES: Toothbrushing is one of the most important factors in controlling plaque accumulation and dental caries. There are vast varieties of toothbrushes available in the market. This study was designed to evaluate the effectiveness of novel chewable toothbrushes as compared to manual toothbrushes in plaque removal among 10-12-year-old children. MATERIALS AND METHODS: This randomized controlled trial was conducted on 40 healthy children aged between 10 and 12 years of age who were randomly assigned to either of the groups: Group I--Chewable Toothbrushes and Group II--Manual Toothbrushes. Following oral prophylaxis, baseline records of oral hygiene indices (Simplified oral hygiene index (OHI-S) in indexed teeth and Turesky modification of Quigley Hein plaque index (TMQHI) were taken. Baseline Saliva samples were collected and sent for Streptococcus mutans counts. Children were then instructed to use their respective toothbrush twice daily for a week. Oral hygiene indices and S. mutans counts were repeated after 1 week. RESULTS: Differences in pre-brushing and post-brushing plaque scores and salivary S. mutans counts were statistically significant when compared using paired-sample t test and independent-sample t test. There was a significant reduction in salivary S. mutans counts after using both chewable and manual toothbrushes. However, there was no statistically significant difference between the two groups (P = 0.08). CONCLUSION: Chewable toothbrushes are equally effective in plaque control when compared to manual toothbrushes. These can be a reliable alternative for children who lack manual dexterity.

Remineralization Potential of Theobromine on Artificial Carious Lesions.

BACKGROUND AND AIMS: This study aimed to investigate the remineralization potential of two concentrations of theobromine (100 mg/L and 200 mmg/L) with fluoridated dentifrice, NovaMin, and nanohydroxyapatite using DIAGNOdent, scanning electron microscopy (SEM), and energy dispersive X-ray (EDX) analysis. MATERIALS AND METHODS: Two sections were taken from 50 teeth each. Artificial carious lesions were induced using demineralizing solution. Evaluation using DIAGNOdent, SEM, and EDX analysis for elemental evaluation of Ca/P ratio and fluoride ion was carried out. Teeth sections were then randomly assigned to five different groups: (1) fluoridated dentifrice (Colgate™, Colgate -Palmolive, India), Novamine- Shy NM™, Group pharamaceuticals, India), 3. Nano-hydroxyapatite- Remin Pro™, Voco, Germany) 4. 100mg and 5. 200mg of Theobromine toothpaste (Theodent classic™, Rennou, UK-853069003006). Remineralization was carried out for 14 days with two applications per day. Samples were reanalyzed using DIAGNOdent, SEM, and EDX. RESULTS: A Tukey post-hoc test revealed statistically significant difference between NovaMin and all the other toothpastes (P < 0.001) for DIAGNOdent readings. On performing SEM-EDX analysis, it was seen that all agents had remineralization potential; however, no significant difference was found. CONCLUSION: Theobromine can be used as an effective novel remineralizing agent alternative to the already-available agents.

Efficacy of triphala mouth rinse (aqueous extracts) on dental plaque and gingivitis in children.

AIM: The aim of the present study was to evaluate the efficacy of triphala mouth rinse (aqueous) in the reduction of plaque and gingivitis among children. METHODS: The study was a randomized, double-blinded, controlled trial, with a total of 60 school children (n = 30 in each group; triphala and chlorhexidine groups). Plaque and gingival indices were used to evaluate baseline and follow-up plaque and gingivitis. RESULTS: A total of 57 children completed the study. Both chlorhexidine and triphala groups showed significantly lower mean gingival and plaque index scores at follow up than baseline (P < 0.001). There was no significant difference in the percentage change in the mean gingival index between the two groups (P = 0.826). The percentage change in the mean plaque index was significantly higher in the chlorhexidine group compared to the triphala group (P = 0.048). CONCLUSION: The effectiveness of triphala in the reduction of plaque and gingivitis was comparable to chlorhexidine, and can be used for short-term purposes without potential side-effects. It is a cost-effective alternative in reducing plaque and gingivitis.