Quantum-assisted distortion-free audio signal sensing.

Quantum sensors are known for their high sensitivity in sensing applications. However, this sensitivity often comes with severe restrictions on other parameters which are also important. Examples are that in measurements of arbitrary signals, limitation in linear dynamic range could introduce distortions in magnitude and phase of the signal. High frequency resolution is another important feature for reconstructing unknown signals. Here, we demonstrate a distortion-free quantum sensing protocol that combines a quantum phase-sensitive detection with heterodyne readout. We present theoretical and experimental investigations using nitrogen-vacancy centers in diamond, showing the capability of reconstructing audio frequency signals with an extended linear dynamic range and high frequency resolution. Melody and speech based signals are used for demonstrating the features. The methods could broaden the horizon for quantum sensors towards applications, e.g. telecommunication in challenging environment, where low-distortion measurements are required at multiple frequency bands within a limited volume.

Anapole Meta-Atoms: Nonradiating Electric and Magnetic Sources.

The existence of classical nonradiating electromagnetic sources is one of the puzzling questions to date. Here, we investigate radiation properties of physical systems composed of a single ultrahigh permittivity dielectric hollow disk excited by electric or magnetic pointlike dipole antennas, placed inside the inner bore. Using analytical and numerical methods, we demonstrate that such systems can support anapole states with total suppression of far-field radiation and thereby exhibit the properties of electric or magnetic nonradiating sources. It is shown that the suppression of the far-field radiated power is a result of the destructive interference between radiative contributions of the pointlike dipole antennas and the corresponding induced dipole moments of the hollow disk. The experimental investigation of the nonradiating electric source has been performed to confirm our theoretical predictions. Our results pave the way to create and realize compact nonradiative sources for applications in modern wireless power transfer systems, sensors, RFID tags, and medical technologies.

Ceramic resonators for targeted clinical magnetic resonance imaging of the breast.

Currently, human magnetic resonance (MR) examinations are becoming highly specialized with a pre-defined and often relatively small target in the body. Conventionally, clinical MR equipment is designed to be universal that compromises its efficiency for small targets. Here, we present a concept for targeted clinical magnetic resonance imaging (MRI), which can be directly integrated into the existing clinical MR systems, and demonstrate its feasibility for breast imaging. The concept comprises spatial redistribution and passive focusing of the radiofrequency magnetic flux with the aid of an artificial resonator to maximize the efficiency of a conventional MR system for the area of interest. The approach offers the prospect of a targeted MRI and brings novel opportunities for high quality specialized MR examinations within any existing MR system.

Circularly polarized microwave antenna for nitrogen vacancy centers in diamond.

The sensing applications of nitrogen-vacancy color centers in a diamond require an efficient manipulation of the color center ground state over the whole volume of an ensemble. Thus, it is necessary to produce strong uniform magnetic fields of a well-defined circular polarization at microwave frequencies. In this paper, we develop a circularly polarized microwave antenna based on the excitation of hybrid electromagnetic modes in a high-permittivity dielectric resonator. The influence of the geometrical parameters of the antenna on the reflection coefficient and magnetic field magnitude is studied numerically and discussed. The Rabi frequencies and their inhomogeneity over the volume of a commercially available diamond sample are calculated. With respect to the numerical predictions, a Rabi frequency as high as 34 MHz with an inhomogeneity of 4% over a 1.2 mm × ∅2.5 mm (5.9 mm3 in volume) diamond sample can be achieved for 10 W of input power at room temperature. The antenna prototype is fabricated, and experimental investigations of its characteristics are performed in microwave and optical frequency domains. The circular polarization of the microwave magnetic field with an ellipticity of 0.94 is demonstrated experimentally. The Rabi oscillation frequency and its inhomogeneity are measured, and the results demonstrate a good agreement with the numerically predicted results.

Systematic Analysis of the Improvements in Magnetic Resonance Microscopy with Ferroelectric Composite Ceramics.

The spatial resolution and signal-to-noise ratio (SNR) attainable in magnetic resonance microscopy (MRM) are limited by intrinsic probe losses and probe-sample interactions. In this work, the possibility to exceed the SNR of a standard solenoid coil by more than a factor-of-two is demonstrated theoretically and experimentally. This improvement is achieved by exciting the first transverse electric mode of a low-loss ceramic resonator instead of using the quasi-static field of the metal-wire solenoid coil. Based on theoretical considerations, a new probe for microscopy at 17 T is developed as a dielectric ring resonator made of ferroelectric/dielectric low-loss composite ceramics precisely tunable via temperature control. Besides the twofold increase in SNR, compared with the solenoid probe, the proposed ceramic probe does not cause static-field inhomogeneity and related image distortion.

High permittivity ceramics improve the transmit field and receive efficiency of a commercial extremity coil at 1.5 Tesla.

OBJECTIVE: The purpose of this work is to investigate the use of ceramic materials (based on BaTiO3 with ZrO2 and CeO2-additives) with very high relative permittivity (εr ∼ 4500) to increase the local transmit field and signal-to-noise ratio (SNR) for commercial extremity coils on a clinical 1.5 T MRI system. METHODS: Electromagnetic simulations of transmit efficiency and specific absorption rate (SAR) were performed using four ferroelectric ceramic blocks placed around a cylindrical phantom, as well as placing these ceramics around the wrist of a human body model. Results were compared with experimental scans using the transmit body coil of the 1.5 T MRI system and an eight-element extremity receive array designed for the wrist. SNR measurements were also performed for both phantom and in vivo scans. RESULTS: Electromagnetic simulations and phantom/in vivo experiments showed an increased in the local transmit efficiency from the body coil of ∼20-30%, resulting in an ∼50% lower transmit power level and a significant reduction in local and global SAR throughout the body. For in vivo wrist experiments, the SNR of a commercial eight-channel receive array, integrated over the entire volume, was improved by ∼45% with the ceramic. CONCLUSION: The local transmit efficiency as well as the SNR can be increased for 1.5 T extremity MRI with commercial array coils by using materials with very high permittivity.