ABSTRACT
Despite minimal formation damage or water-cut, the majority of oil wells in brown oil fields cease to flow naturally. The current study looks into and analyses what caused a self-flowing well in the upper Assam basin to become non-flowing. The non-flow condition of the well was investigated in the current work as a function of water cut, reservoir pressure, reservoir rock permeability, and GOR. The effect of WHP and WHT on these functions was investigated. This work incorporates innovative methodology that uses the PROSPER simulation model for assessing the possibility of establishing flowability in a dead well based on inflow (IPR) and vertical lift performance (VLP). Subsequent analysis was carried out to examine the scope of producing this dead well under continuous flow gas lift. For this, the current work first examined the tubing diameter and reservoir temperature as standalone parameters to find out if they have any role to play in the flowability of the dead well. Following this, sensitivity analysis was done taking four parameters into account, i.e., reservoir pressure, reservoir rock permeability, water cut, and total GOR. In the current work, surface equipment correlation was established using Beggs and Brill correlation, while vertical lift performance was established using correlation from Petroleum Expert. The results of the current work highlight that a well's production rate under continuous flow gas lift can be enhanced by employing an optimised gas injection rate. The findings of this work conclude that higher reservoir pressure enables an oil well to produce with a high water cut under a continuous flow gas lift system, provided there are no formation damage issues on the well.
ABSTRACT
Coil tubing (CT) is widely regarded as one of the most effective servicing tools for dealing with a variety of oil and gas production issues, and it is also commonly used for oil well workover operations in India's upper Assam basin. The current work considers QT 800 to be the CT material used for actual oil well operations. With reference to actual operations carried out in some of the oil wells in the upper Assam basin, the current research analyses the limitations of CTs (QT 800, QT 900, and QT 1000) based on developing limit curves that can depict the operating limit and infer CT failure probability. This study also includes fatigue analysis to determine the likelihood of damage from hot oil circulation, water injection, and nitrogen shot operations while performing them using the CTs (QT 700, QT 800, QT 900, and QT 1000). The current work adopts the methodology of CT assessment based on a computational model built in MATLAB with respect to different oil well parameters in the upper Assam basin. This study takes an innovative approach by taking downhole temperature into account when determining the CT limit for QT 800, which signifies novelty in the current work. According to the computational analysis used in the study on CT limits, mechanical strain, thermal strain, and the combined strain of the CT material all affect CT elongation. This observation was often found to be a research gap in different research works as this aspect in previous studies was not considered while analysing CT operations. The findings of the present study highlight and draw the conclusion that temperature variations in the well and the CTU's circulating fluid contribute linearly to CT strain. CT's working limit diminishes with increasing internal and external pressure and diametrical growth, which eventually causes fatigue damage.