ABSTRACT
The production of personal protective equipment (PPE) has increased dramatically in recent years, not only because of the pandemic, but also because of stricter legislation in the field of Employee Protection. The increasing use of PPE, including disposable surgical masks (DSMs), is putting additional pressure on waste collectors. For this reason, it is necessary to find high-quality solutions for this type of waste. Mechanical recycling is still the most common type of recycling, but the recyclates are often classified as low-grade materials. For this reason, a detailed analysis of the recyclates is necessary. These data will help us to improve the properties and find the right end application that will increase the value of the materials. This work represents an extended analysis of the recyclates obtained from DSMs, manufactured from different polymers. Using surface and morphology tests, we have gained insights into the distribution of different polymers in polymer blends and their effects on mechanical and surface properties. It was found that the addition of ear loop material to the PP melt makes the material tougher. In the polymer blends obtained, PP and PA 6 form the surface (affects surface properties), while PU and PET are distributed mainly inside the injection-molded samples.
ABSTRACT
With the outbreak of the COVID-19 pandemic, textile laundering hygiene has proved to be a fundamental measure in preventing the spread of infections. The first part of our study evaluated the decontamination efficiency of various treatments (thermal, photothermal, and microwave) for bio contaminated textiles. The effects on textile decontamination of adding saturated steam into the drum of a household textile laundering machine were investigated and evaluated in the second part of our study. The results show that the thermal treatment, conducted in a convection heating chamber, provided a slight reduction in efficiency and did not ensure the complete inactivation of Staphylococcus aureus on cotton swatches. The photothermal treatment showed higher reduction efficiency on contaminated textile samples, while the microwave treatment (at 460 W for a period of 60 s) of bio contaminated cotton swatches containing higher moisture content provided satisfactory bacterial reduction efficiency (more than 7 log steps). Additionally, the treatment of textiles in the household washing machine with the injection of saturated steam into the washing drum and a mild agitation rhythm provided at least a 7 log step reduction in S. aureus. The photothermal treatment of bio contaminated cotton textiles showed promising reduction efficiency, while the microwave treatment and the treatment with saturated steam proved to be the most effective.
