High-frequency high-power DNP/EPR spectrometer operating at 7 T magnetic field.

One of the most essential prerequisites for the development of pulse Dynamic Nuclear Polarization (DNP) is the ability to generate high-power coherent mm-wave pulses at the electron precession frequencies corresponding to the magnetic fields of modern high-resolution NMR spectrometers. As a major step towards achieving this goal, an Extended Interaction Klystron (EIK) pulse amplifier custom-built by the Communications and Power Industries, Inc. and producing up to 140 W at 197.8 GHz, was integrated with in-house built NMR/DNP/EPR spectrometer operating at 7 T magnetic field. The spectrometer employs a Thomas Keating, Ltd. quasioptical bridge to direct mm-waves into a homebuilt DNP probe incorporating photonic bandgap (PBG) resonators to further boost electronic B1e fields. Three-pulse electron spin echo nutation experiments were employed to characterize the B1e fields at the sample by operating the homodyne 198 GHz bridge in an induction mode. Room-temperature experiments with a single-crystal high-pressure, high-temperature (HPHT) diamond and a polystyrene film doped with BDPA radical yielded < 9 ns π/2 pulses at ca. 50 W specified EIK output at the corresponding resonance frequencies and the PBG resonator quality factor of Q≈300. DNP experiments carried out in a "gated" mode by supplying 20 µs mm-wave pulses every 1 ms yielded 13C solid-effect DNP with gains up to 20 for the polystyrene-BDPA sample at natural 13C abundance. For a single-crystal HPHT diamond, the gated DNP mode yielded almost the same 13C enhancement as a low-power continuous wave (CW) mode at 0.4 W, whereas no DNP effect was observed for the BDPA/polystyrene sample in the latter case. To illustrate the versatility of our upgraded DNP spectrometer, room-temperature Overhauser DNP enhancements of 7-14 for 31P NMR signal were demonstrated using a liquid droplet of 1 M tri-phenyl phosphine co-dissolved with 100 mM of BDPA in toluene­d8.

Peptoid-based macrodiscs of variable lipid composition for structural studies of membrane proteins by oriented-sample solid-state NMR.

Solid-state Nuclear Magnetic Resonance (NMR) in combination with magnetically aligned discoidal lipid mimics allows for studying the conformations of membrane proteins in planar, lipid-rich bilayer environments and at the physiological temperature. We have recently demonstrated the general applicability of macrodiscs composed of DMPC lipids and peptoid belts, which yield magnetic alignment and NMR spectroscopic resolution comparable or superior to detergent-containing bicelles. Here we report on a considerable improvement in the magnetic alignment and NMR resolution of peptoid-based macrodiscs consisting of a mixture of the zwitterionic and negatively charged lipids (DMPC/DMPG at the 85% to 15% molar ratio). The resulting linewidths are about 30% sharper due to the higher orientational order parameter likely arising from the stabilizing electrostatic repulsion between the discs. Moreover, highly aligned, detergent-free macrodiscs can be formed with a longer-chain lipid, DPPC. Interestingly, the spectra of Pf1 in the two lipid mimetics are almost indistinguishable, which would mean that the overall transmembrane helix tilt might be governed not only by the hydrophobic matching but also possibly by the interactions of the flanking lysine and arginine residues at the membrane interface.

Aligned peptoid-based macrodiscs for structural studies of membrane proteins by oriented-sample NMR.

Development of a robust, uniform, and magnetically orientable lipid mimetic will undoubtedly advance solid-state NMR of macroscopically aligned membrane proteins. Here, we report on a novel lipid membrane mimetic based on peptoid belts. The peptoids, composed of 15 residues, were synthesized by alternating N-(2-phenethyl)glycine with N-(2-carboxyethyl)glycine residues at a 2:1 molar ratio. The chemically synthesized peptoids possess a much lower degree of polydispersity versus styrene-maleic acid polymers, thus yielding uniform discs. Moreover, the peptoid oligomers are more flexible and do not require a specific folding, unlike lipoproteins, in order to wrap around the hydrophobic membrane core. The NMR spectra measured for the membrane-bound form of Pf1 coat protein incorporated in this new lipid mimetics demonstrate a higher order parameter and uniform linewidths compared with the conventional bicelles and peptide-based macrodiscs. Importantly, unlike bicelles, the peptoid-based macrodiscs are detergent free.

Characterization of photonic band resonators for DNP NMR of thin film samples at 7 T magnetic field.

Polarization of nuclear spins via Dynamic Nuclear Polarization (DNP) relies on generating sufficiently high mm-wave B1e fields over the sample, which could be achieved by developing suitable resonance structures. Recently, we have introduced one-dimensional photonic band gap (1D PBG) resonators for DNP and reported on prototype devices operating at ca. 200 GHz electron resonance frequency. Here we systematically compare the performance of five (5) PBG resonators constructed from various alternating dielectric layers by monitoring the DNP effect on natural-abundance 13C spins in synthetic diamond microparticles embedded into a commercial polyester-based lapping film of just 3 mil (76 µm) thickness. An odd-numbered configuration of dielectric layers for 1D PBG resonator was introduced to achieve further B1e enhancements. Among the PBG configurations tested, combinations of high-ε perovskite LiTaO3 together with AlN as well as AlN with optical quartz wafers have resulted in ca. 40 to over 50- fold gains in the average mm-wave power over the sample vs. the mirror-only configuration. The results are rationalized in terms of the electromagnetic energy distribution inside the resonators obtained analytically and from COMSOL simulations. It was found that average of B1e2 over the sample strongly depends on the arrangement of the dielectric layers that are the closest to the sample, which favors odd-numbered PBG resonator configurations for their use in DNP.

1H/13C/15N triple-resonance experiments for structure determinaton of membrane proteins by oriented-sample NMR.

The benefits of triple-resonance experiments for structure determination of macroscopically oriented membrane proteins by solid-state NMR are discussed. While double-resonance 1H/15N experiments are effective for structure elucidation of alpha-helical domains, extension of the method of oriented samples to more complex topologies and assessing side-chain conformations necessitates further development of triple-resonance (1H/13C/15N) NMR pulse sequences. Incorporating additional spectroscopic dimensions involving 13C spin-bearing nuclei, however, introduces essential complications arising from the wide frequency range of the 1H-13C dipolar couplings and 13C CSA (>20 â€‹kHz), and the presence of the 13C-13C homonuclear dipole-dipole interactions. The recently reported ROULETTE-CAHA pulse sequence, in combination with the selective z-filtering, can be used to evolve the structurally informative 1H-13C dipolar coupling arising from the aliphatic carbons while suppressing the signals from the carbonyl and methyl regions. Proton-mediated magnetization transfer under mismatched Hartman-Hahn conditions (MMHH) can be used to correlate 13C and 15N nuclei in such triple-resonance experiments for the subsequent 15N detection. The recently developed pulse sequences are illustrated for n-acetyl Leucine (NAL) single crystal and doubly labeled Pf1 coat protein reconstituted in magnetically aligned bicelles. An interesting observation is that in the case of 15N-labeled NAL measured at 13C natural abundance, the triple (1H/13C/15N) MMHH scheme predominantly gives rise to long-range intermolecular magnetization transfers from 13C to 15N spins; whereas direct Hartmann-Hahn 13C/15N transfer is entirely intramolecular. The presented developments advance NMR of oriented samples for structure determination of membrane proteins and liquid crystals.

Computer-generated pulse sequences for 1H-15N and 1Hα-13Cα separated local-field experiments.

High-resolution separated local field (SLF) experiments are employed in oriented-sample solid state NMR to measure angular-dependent heteronuclear dipolar couplings for structure determination. While traditionally these experiments have been designed analytically by determining cycles of pulses with specific phases and durations to achieve cancellation of the homonuclear dipolar terms in the average Hamiltonian, recent work has introduced a computational approach to optimizing linewidths of the 1H-15N dipolar resonances. Accelerated by GPU processors, a computer algorithm searches for the optimal parameters by simulating numerous 1H-15N NMR spectra. This approach, termed ROULETTE, showed promising results by developing a new pulse sequence (ROULETTE-1.0) exhibiting 18% sharper mean linewidths than SAMPI4 for an N-acetyl Leucine (NAL) crystal. Herein, we expand on this previous work to improve the performance of the 1H-15N SLF experiment and extend the work beyond the original approach to new SLF experiments. The new algorithm, in addition to finding pulse durations and phases, now searches for the optimal on/off application scheme of radio frequency irradiation on each channel. This constitutes true de novo optimization, effectively optimizing every aspect of a pulse sequence instead of just phases and durations. With an improved ROULETTE algorithm, we have found a new 1H-15N pulse sequence, termed ROULETTE-2.0, yielding 32% sharper mean linewidths than SAMPI4 for NAL crystal at 500 MHz 1H frequency. Whereas both SAMPI4 and ROULETTE-1.0 have a window where the rf power on the I-channel is turned off, the new pulse sequence is entirely windowless. Furthermore, the reliability of the algorithm has been greatly improved in terms of avoiding false positives, i.e. well-performing pulse sequences in silica that fail to render narrow resonances in experiment. The program has been extended to the 13Cα-1Hα SLF experiments, using a 6 subdwell architecture similar to the 1H-15N optimization. Compared to the PISEMA pulse sequence, the mean 13Cα-1Hα linewidth is 17% sharper for the new pulse sequence, termed ROULETTE-CAHA. In addition to superior performance, the work demonstrates the broad applicability of the algorithm and its adaptability to different NMR experiments and spin systems.

NMR "Crystallography" for Uniformly (13 C, 15 N)-Labeled Oriented Membrane Proteins.

In oriented-sample (OS) solid-state NMR of membrane proteins, the angular-dependent dipolar couplings and chemical shifts provide a direct input for structure calculations. However, so far only 1 H-15 N dipolar couplings and 15 N chemical shifts have been routinely assessed in oriented 15 N-labeled samples. The main obstacle for extending this technique to membrane proteins of arbitrary topology has remained in the lack of additional experimental restraints. We have developed a new experimental triple-resonance NMR technique, which was applied to uniformly doubly (15 N, 13 C)-labeled Pf1 coat protein in magnetically aligned DMPC/DHPC bicelles. The previously inaccessible 1 Hα -13 Cα dipolar couplings have been measured, which make it possible to determine the torsion angles between the peptide planes without assuming α-helical structure a priori. The fitting of three angular restraints per peptide plane and filtering by Rosetta scoring functions has yielded a consensus α-helical transmembrane structure for Pf1 protein.

De novo NMR pulse sequence design using Monte-Carlo optimization techniques.

Separated Local Field (SLF) experiments have been routinely used for measuring 1H-15N heteronuclear dipolar couplings in oriented-sample solid-state NMR for structure determination of proteins. In the on-going pursuit of designing better-performing SLF pulse sequences (e.g. by increasing the number of subdwells, and varying the rf amplitudes and phases), analytical treatment of the relevant average Hamiltonian terms may become cumbersome and/or nearly impossible. Numerical simulations of NMR experiments using GPU processors can be employed to rapidly calculate spectra for moderately sized spin systems, which permit an efficient numeric optimization of pulse sequences by the Monte Carlo Simulated Annealing protocol. In this work, a computational strategy was developed to find the optimal phases and timings that substantially improve the 1H-15N dipolar linewidths over a broad range of dipolar couplings as compared to SAMPI4. More than 100 pulse sequences were developed de novo and tested on an N-acetyl Leucine crystal. Seventeen distinct pulse sequences were shown to produce sharper mean linewidths than SAMPI4. Overall, these pulse sequences have more variable parameters (involving non-quadrature phases) and do not involve symmetry between the odd and even dwells, which would likely preclude their rigorous analytical treatment. The top performing pulse sequence, termed ROULETTE-1, has 18% sharper mean linewidths than SAMPI4 when run on an N-acetyl Leucine crystal. This sequence was also shown to be robust over a broad range of 1H carrier frequencies and various crystal orientations. The performance of such an optimized pulse sequence was also illustrated on 15N Leucine-labeled Pf1 coat protein reconstituted in magnetically aligned bicelles. For the optimized pulse sequence the mean peak width was 14% sharper than SAMPI4, which in turn yielded a better signal to noise ratio, 20:1 vs. 17:1. This method is potentially extendable to de novo development of a variety of NMR experiments.

Validation of protein backbone structures calculated from NMR angular restraints using Rosetta.

Multidimensional solid-state NMR spectra of oriented membrane proteins can be used to infer the backbone torsion angles and hence the overall protein fold by measuring dipolar couplings and chemical shift anisotropies, which depend on the orientation of each peptide plane with respect to the external magnetic field. However, multiple peptide plane orientations can be consistent with a given set of angular restraints. This ambiguity is further exacerbated by experimental uncertainty in obtaining and interpreting such restraints. The previously developed algorithms for structure calculations using angular restraints typically involve a sequential walkthrough along the backbone to find the torsion angles between the consecutive peptide plane orientations that are consistent with the experimental data. This method is sensitive to experimental uncertainty in interpreting the peak positions of as low as ± 10 Hz, often yielding high structural RMSDs for the calculated structures. Here we present a significantly improved version of the algorithm which includes the fitting of several peptide planes at once in order to prevent propagation of error along the backbone. In addition, a protocol has been devised for filtering the structural solutions using Rosetta scoring functions in order to find the structures that both fit the spectrum and satisfy bioinformatics restraints. The robustness of the new algorithm has been tested using synthetic angular restraints generated from the known structures for two proteins: a soluble protein 2gb1 (56 residues), chosen for its diverse secondary structure elements, i.e. an alpha-helix and two beta-sheets, and a membrane protein 4a2n, from which the first two transmembrane helices (having a total of 64 residues) have been used. Extensive simulations have been performed by varying the number of fitted planes, experimental error, and the number of NMR dimensions. It has been found that simultaneously fitting two peptide planes always shifted the distribution of the calculated structures toward lower structural RMSD values as compared to fitting a single torsion-angle pair. For each protein, irrespective of the simulation parameters, Rosetta was able to distinguish the most plausible structures, often having structural RMSDs lower than 2 Å with respect to the original structure. This study establishes a framework for de-novo protein structure prediction using a combination of solid-state NMR angular restraints and bioinformatics.

Multi-resonant photonic band-gap/saddle coil DNP probehead for static solid state NMR of microliter volume samples.

The most critical condition for performing Dynamic Nuclear Polarization (DNP) NMR experiments is achieving sufficiently high electronic B1e fields over the sample at the matched EPR frequencies, which for modern high-resolution NMR instruments fall into the millimeter wave (mmW) range. Typically, mmWs are generated by powerful gyrotrons and/or extended interaction klystrons (EIKs) sources and then focused onto the sample by dielectric lenses. However, further development of DNP methods including new DNP pulse sequences may require B1e fields higher than one could achieve with the current mmW technology. In order to address the challenge of significantly enhancing the mmW field at the sample, we have constructed and tested one-dimensional photonic band-gap (PBG) mmW resonator that was incorporated inside a double-tuned radiofrequency (rf) NMR saddle coil. The photonic crystal is formed by stacking ceramic discs with alternating high and low dielectric constants and thicknesses of λ/4 or 3λ/4, where λ is the wavelength of the incident mmW field in the corresponding dielectric material. When the mmW frequency is within the band gap of the photonic crystal, a defect created in the middle of the crystal confines the mmW energy, thus forming a resonant structure. An aluminum mirror in the middle of the defect has been used to substitute one-half of the structure with its mirror image in order to reduce the resonator size and simplify its tuning. The latter is achieved by adjusting the width of the defect by moving the aluminum mirror with respect to the dielectric stack using a gear mechanism. The 1D PBG resonator was the key element for constructing a multi-resonant integrated DNP/NMR probehead operating at 190-199 GHz EPR/300 MHz 1H/75.5 MHz 13C NMR frequencies. Initial tests of the multi-resonant DNP/NMR probehead were carried out using a quasioptical mmW  bridge and a Bruker Biospin Avance II spectrometer equipped with a standard Bruker 7 T wide-bore 89 mm magnet parked at 300.13 MHz 1H NMR frequency. The mmW bridge built with all solid-state active components allows for the frequency tuning between ca. 190 and ca. 199 GHz with the output power up to 27 dBm (0.5 W) at 192 GHz and up to 23 dBm (0.2 W) at 197.5 GHz. Room temperature DNP experiments with a synthetic single crystal high-pressure high-temperature (HPHT) diamond (0.3 × 0.3 × 3.0 mm3) demonstrated dramatic 1500-fold enhancement of 13C natural abundance NMR signal at full incident mmW power. Significant 13C DNP enhancement (of about 90) have been obtained at incident mmW powers of as low as <100 µW. Further tests of the resonator performance have been carried out with a thin (ca. 100 µm thickness) composite polystyrene-microdiamond film by controlling the average mmW power at the optimal DNP conditions via a gated mode of operation. From these experiments, the PBG resonator with loaded Q ≃ 250 and finesse F≈75 provides up to 12-fold or 11 db gain in the average mmW power vs. the non-resonant probehead configuration employing only a reflective mirror.

Photonic band-gap resonators for high-field/high-frequency EPR of microliter-volume liquid aqueous samples.

High-field EPR provides significant advantages for studying structure and dynamics of molecular systems possessing an unpaired electronic spin. However, routine use of high-field EPR in biophysical research, especially for aqueous biological samples, is still facing substantial technical difficulties stemming from high dielectric millimeter wave (mmW) losses associated with non-resonant absorption by water and other polar molecules. The strong absorbance of mmW's by water also limits the penetration depth to just fractions of mm or even less, thus making fabrication of suitable sample containers rather challenging. Here we describe a radically new line of high Q-factor mmW resonators that are based on forming lattice defects in one-dimensional photonic band-gap (PBG) structures composed of low-loss ceramic discs of λ/4 in thickness and having alternating dielectric constants. A sample (either liquid or solid) is placed within the E = 0 node of the standing mm wave confined within the defect. A resonator prototype has been built and tested at 94.3 GHz. The resonator performance is enhanced by employing ceramic nanoporous membranes as flat sample holders of controllable thickness and tunable effective dielectric constant. The experimental Q-factor of an empty resonator was  ≈ 420. The Q-factor decreased slightly to  ≈ 370 when loaded with a water-containing nanoporous disc of 50 µm in thickness. The resonator has been tested with a number of liquid biological samples and demonstrated about tenfold gain in concentration sensitivity vs. a high-Q cylindrical TE012-type cavity. Detailed HFSS Ansys simulations have shown that the resonator structure could be further optimized by properly choosing the thickness of the aqueous sample and employing metallized surfaces. The PBG resonator design is readily scalable to higher mmW frequencies and is capable of accommodating significantly larger sample volumes than previously achieved with either Fabry-Perot or cylindrical resonators.

Automated assignment of NMR spectra of macroscopically oriented proteins using simulated annealing.

An automated technique for the sequential assignment of NMR backbone resonances of oriented protein samples has been developed and tested based on 15N-15N homonuclear exchange and spin-exchanged separated local-field spectra. By treating the experimental spectral intensity as a pseudopotential, the Monte-Carlo Simulated Annealing algorithm has been employed to seek lowest-energy assignment solutions over a large sampling space where direct enumeration would be unfeasible. The determined sequential assignments have been scored based on the positions of the crosspeaks resulting from the possible orders for the main peaks. This approach is versatile in terms of the parameters that can be specified to achieve the best-fit result. At a minimum the algorithm requires a continuous segment of the main-peak chemical shifts obtained from a uniformly labeled sample and a spin-exchanged experimental spectrum represented as a 2D matrix array. With selective labeling experiments, groups of chemical shifts corresponding to specific locations in the protein backbone can be fixed, thereby decreasing the sampling space. The output from the program consists of a list of top-score main peak assignments, which can be subjected to further scoring criteria until a consensus solution is found. The algorithm has first been tested on a synthetic spectrum with randomly generated chemical shifts and dipolar couplings for the main peaks. The original assignments have been successfully recovered for as many as 100 main peaks when residue-type information was used even in the presence of substantial spectral peak overlap. The algorithm was then applied to assigning two sets of experimental spectra to recover and confirm the previously established assignments in an automated fashion. For the 20-residue transmembrane domain of Pf1 coat protein reconstituted in magnetically aligned bicelles, the original assignment by Park et al. (2010) was recovered by the automated algorithm with additional input from 5 selectively labeled amino acid spectra. The second case considered was the 46 residue Pf1 bacteriophage from Thiriot et al. (2005) and Knox et al. (2010), of which 38 residues were fit. Automated fitting resulted in several possible assignments but not exactly the original assignment. By using a post-fitting filtering procedure based on the number of missed cross peaks and Pf1 helical structure, a consensus spectroscopic assignment is proposed covering 84% of the original assignment. While the automated assignment works best in spectra with well-resolved crosspeaks, it also tolerates substantial spectral crowding to yield reasonable assignments in the cases where ambiguity and degeneracy of possible assignment solutions are inevitable.

Protein Rotational Dynamics in Aligned Lipid Membranes Probed by Anisotropic T1ρ NMR Relaxation.

A membrane-bound form of Pf1 coat protein reconstituted in magnetically aligned DMPC/DHPC bicelles was used as a molecular probe to quantify for the viscosity of the lipid membrane interior by measuring the uniaxial rotational diffusion coefficient of the protein. Orientationally dependent 15N NMR relaxation times in the rotating frame, or T1ρ, were determined by fitting individually the decay of the resolved NMR peaks corresponding to the transmembrane helix of Pf1 coat protein as a function of the spin-lock time incorporated into the 2D SAMPI4 pulse sequence. The T1ρ relaxation mechanism was modeled by uniaxial rotational diffusion on a cone, which yields a linear correlation with respect to the bond factor sin4θB, where θB is the angle that the NH bond forms with respect to the axis of rotation. Importantly, the bond factors can be independently measured from the dipolar couplings in the separated local-field SAMPI4 spectra. From this dependence, the value of the diffusion coefficient D|| = 8.0 × 105 s-1 was inferred from linear regression of the experimental T1ρ data even without any spectroscopic assignment. Alternatively, a close value of D|| = 7.7 × 105 s-1 was obtained by fitting the T1ρ relaxation data for the assigned NMR peaks of the transmembrane domain of Pf1 to a wavelike pattern as a function of residue number. The method illustrates the use of single-helix transmembrane peptides as molecular probes to assess the dynamic parameters of biological membranes by NMR relaxation in oriented lipid bilayers.

Sensitivity enhancement for membrane proteins reconstituted in parallel and perpendicular oriented bicelles obtained by using repetitive cross-polarization and membrane-incorporated free radicals.

Multidimensional separated local-field and spin-exchange experiments employed by oriented-sample solid-state NMR are essential for structure determination and spectroscopic assignment of membrane proteins reconstituted in macroscopically aligned lipid bilayers. However, these experiments typically require a large number of scans in order to establish interspin correlations. Here we have shown that a combination of optimized repetitive cross polarization (REP-CP) and membrane-embedded free radicals allows one to enhance the signal-to-noise ratio by factors 2.4-3.0 in the case of Pf1 coat protein reconstituted in magnetically aligned bicelles with their normals being either parallel or perpendicular to the main magnetic field. Notably, spectral resolution is not affected at the 2:1 radical-to-protein ratio. Spectroscopic assignment of Pf1 coat protein in the parallel bicelles has been established as an illustration of the method. The proposed methodology will advance applications of oriented-sample NMR technique when applied to samples containing smaller quantities of proteins and three-dimensional experiments.

Selective excitation for spectral editing and assignment in separated local field experiments of oriented membrane proteins.

Spectroscopic assignment of NMR spectra for oriented uniformly labeled membrane proteins embedded in their native-like bilayer environment is essential for their structure determination. However, sequence-specific assignment in oriented-sample (OS) NMR is often complicated by insufficient resolution and spectral crowding. Therefore, the assignment process is usually done by a laborious and expensive "shotgun" method involving multiple selective labeling of amino acid residues. Presented here is a strategy to overcome poor spectral resolution in crowded regions of 2D spectra by selecting resolved "seed" residues via soft Gaussian pulses inserted into spin-exchange separated local-field experiments. The Gaussian pulse places the selected polarization along the z-axis while dephasing the other signals before the evolution of the 1H-15N dipolar couplings. The transfer of magnetization is accomplished via mismatched Hartmann-Hahn conditions to the nearest-neighbor peaks via the proton bath. By optimizing the length and amplitude of the Gaussian pulse, one can also achieve a phase inversion of the closest peaks, thus providing an additional phase contrast. From the superposition of the selective spin-exchanged SAMPI4 onto the fully excited SAMPI4 spectrum, the 15N sites that are directly adjacent to the selectively excited residues can be easily identified, thereby providing a straightforward method for initiating the assignment process in oriented membrane proteins.

Optimization of cross-polarization at low radiofrequency fields for sensitivity enhancement in solid-state NMR of membrane proteins reconstituted in magnetically aligned bicelles.

Solid-state NMR (ssNMR) of oriented membrane proteins (MPs) is capable of providing structural and dynamic information at nearly physiological conditions. However, NMR experiments performed on oriented membrane proteins generally suffer from low sensitivity. Moreover, utilization of high-power radiofrequency (RF) irradiations for magnetization transfer may give rise to sample heating, thereby decreasing the efficiency of conventional cross-polarization schemes. Here we have optimized the recently developed repetitive cross-polarization (REP-CP) sequence (Tang et al., 2011) to further increase the magnetization transfer efficiency for membrane proteins reconstituted in magnetically aligned bicelles and compared its performance to single-contact Hartmann-Hahn cross-polarization (CP), CP-MOIST and the adiabatic transfer. It has been found that employing the REP-CP sequence at RF amplitudes of 19kHz instead of the commonly used higher RF fields (>45kHz) enhances the efficiency of REP-CP. An additional 30% signal can be obtained as compared to the previously published REP-CP, and 20% when compared to the re-optimized REP-CP at 50kHz RF fields. Moreover, the (15)N signal gain of low-power REP-CP was found to be 40% over the adiabatic CP and up to 80% over CP-MOIST. Thus, the low-power REP-CP sequence surpasses all of the previous CP schemes in addition of having the tremendous advantage of reducing the RF powers by a factor of seven, thereby preserving the liquid-like bicelle sample. By contrast, in purely static (NAL crystal) and semi-rigid systems (Pf1 phage), the adiabatic CP was found to be more effective. Periodic oscillations of the intensity profile (distinct from the transient oscillations) as a function of the CP contact time and B1 RF field strengths were observed during the REP-CP optimization with the oscillations becoming more pronounced with lower RF fields. Many-spin simulations were performed to explain the oscillations and their periodicity.

Nanotube array method for studying lipid-induced conformational changes of a membrane protein by solid-state NMR.

Anodic aluminum oxide substrates with macroscopically aligned homogeneous nanopores of 80 nm in diameter enable two-dimensional, solid-state nuclear magnetic resonance studies of lipid-induced conformational changes of uniformly (15)N-labeled Pf1 coat protein in native-like bilayers. The Pf1 helix tilt angles in bilayers composed of two different lipids are not entirely governed by the membrane thickness but could be rationalized by hydrophobic interactions of lysines at the bilayer interface. The anodic aluminum oxide alignment method is applicable to a broader repertoire of lipids versus bicelle bilayer mimetics currently employed in solid-state nuclear magnetic resonance of oriented samples, thus allowing for elucidation of the role played by lipids in shaping membrane proteins.

Coherent and stochastic averaging in solid-state NMR.

A new approach for calculating solid-state NMR lineshapes of uniaxially rotating membrane proteins under the magic-angle spinning conditions is presented. The use of stochastic Liouville equation (SLE) allows one to account for both coherent sample rotation and stochastic motional averaging of the spherical dipolar powder patterns by uniaxial diffusion of the spin-bearing molecules. The method is illustrated via simulations of the dipolar powder patterns of rigid samples under the MAS conditions, as well as the recent method of rotational alignment in the presence of both MAS and rotational diffusion under the conditions of dipolar recoupling. It has been found that it is computationally more advantageous to employ direct integration over a spherical grid rather than to use a full angular basis set for the SLE solution. Accuracy estimates for the bond angles measured from the recoupled amide 1H-15N dipolar powder patterns have been obtained at various rotational diffusion coefficients. It has been shown that the rotational alignment method is applicable to membrane proteins approximated as cylinders with radii of approximately 20Å, for which uniaxial rotational diffusion within the bilayer is sufficiently fast and exceeds the rate 2×105s-1.

Sensitivity enhancement and contrasting information provided by free radicals in oriented-sample NMR of bicelle-reconstituted membrane proteins.

Elucidating structure and topology of membrane proteins (MPs) is essential for unveiling functionality of these important biological constituents. Oriented-sample solid-state NMR (OS-NMR) is capable of providing such information on MPs under nearly physiological conditions. However, two dimensional OS-NMR experiments can take several days to complete due to long longitudinal relaxation times combined with the large number of scans to achieve sufficient signal sensitivity in biological samples. Here, free radicals 5-DOXYL stearic acid, TEMPOL, and CAT-1 were added to uniformly (15)N-labeled Pf1 coat protein reconstituted in DMPC/DHPC bicelles, and their effect on the longitudinal relaxation times (T1Z) was investigated. The dramatically shortened T1Z's allowed for the signal gain per unit time to be used for either: (i) up to a threefold reduction of the total experimental time at 99% magnetization recovery or (ii) obtaining up to 74% signal enhancement between the control and radical samples during constant experimental time at "optimal" relaxation delays. In addition, through OS-NMR and high-field EPR studies, free radicals were able to provide positional constraints in the bicelle system, which provide a description of the location of each residue in Pf1 coat protein within the bicellar membranes. This information can be useful in the determination of oligomerization states and immersion depths of larger membrane proteins.