Switching Lead for Tin in PbHfO3 : Noncubic Structure of SnHfO3.

The removal of lead from commercialized perovskite-oxide-based piezoceramics has been a recent major topic in materials research owing to legislation in many countries. In this regard, Sn(II)-perovskite oxides have garnered keen interest due to their predicted large spontaneous electric polarizations and isoelectronic nature for substitution of Pb(II) cations. However, they have not been considered synthesizable owing to their high metastability. Herein, the perovskite lead hafnate, i.e., PbHfO3 in space group Pbam, is shown to react with SnClF at a low temperature of 300 °C, and resulting in the first complete Sn(II)-for-Pb(II) substitution, i.e. SnHfO3 . During this topotactic transformation, a high purity and crystallinity is conserved with Pbam symmetry, as confirmed by X-ray and electron diffraction, elemental analysis, and 119 Sn Mössbauer spectroscopy. In situ diffraction shows SnHfO3 also possesses reversible phase transformations and is potentially polar between ≈130-200 °C. This so-called 'de-leadification' is thus shown to represent a highly useful strategy to fully remove lead from perovskite-oxide-based piezoceramics and opening the door to new explorations of polar and antipolar Sn(II)-oxide materials.

Circumventing thermodynamics to synthesize highly metastable perovskites: nano eggshells of SnHfO3.

Sn(ii)-based perovskite oxides, being the subject of longstanding theoretical interest for the past two decades, have been synthesized for the first time in the form of nano eggshell particle morphologies. All past reported synthetic attempts have been unsuccessful owing to their metastable nature, i.e., by their thermodynamic instability towards decomposition to their constituent oxides. A new approach was discovered that finally provides an effective solution to surmounting this intractable synthetic barrier and which can be the key to unlocking the door to many other predicted metastable oxides. A low-melting KSn2Cl5 salt was utilized to achieve a soft topotactic exchange of Sn(ii) cations into a Ba-containing perovskite, i.e., BaHfO3 with particle sizes of ∼350 nm, at a low reaction temperature of 200 °C. The resulting particles exhibit nanoshell-over-nanoshell morphologies, i.e., with SnHfO3 forming as ∼20 nm thick shells over the surfaces of the BaHfO3 eggshell particles. Formation of the metastable SnHfO3 is found to be thermodynamically driven by the co-production of the highly stable BaCl2 and KCl side products. Despite this, total energy calculations show that Sn(ii) distorts from the A-site asymmetrically and randomly and the interdiffusion has a negligible impact on the energy of the system (i.e., layered vs. solid solution). Additionally, nano eggshell particle morphologies of BaHfO3 were found to yield highly pure SnHfO3 for the first time, thus circumventing the intrinsic ion-diffusion limits occurring at this low reaction temperature. In summary, these results demonstrate that the metastability of many theoretically predicted Sn(ii)-perovskites can be overcome by leveraging the high cohesive energies of the reactants, the exothermic formation of a stable salt side product, and a shortened diffusion pathway for the Sn(ii) cations.

Renaissance of Topotactic Ion-Exchange for Functional Solids with Close Packed Structures.

Recently, many new, complex, functional oxides have been discovered with the surprising use of topotactic ion-exchange reactions on close-packed structures, such as found for wurtzite, rutile, perovskite, and other structure types. Despite a lack of apparent cation-diffusion pathways in these structure types, synthetic low-temperature transformations are possible with the interdiffusion and exchange of functional cations possessing ns2 stereoactive lone pairs (e. g., Sn(II)) or unpaired ndx electrons (e. g., Co(II)), targeting new and favorable modulations of their electronic, magnetic, or catalytic properties. This enables a synergistic blending of new functionality to an underlying three-dimensional connectivity, i. e., [-M-O-M-O-]n , that is maintained during the transformation. In many cases, this tactic represents the only known pathway to prepare thermodynamically unstable solids that otherwise would commonly decompose by phase segregation, such as that recently applied to the discovery of many new small bandgap semiconductors.

Direct-Contact Cytotoxicity Evaluation of CoCrFeNi-Based Multi-Principal Element Alloys.

Transition metal multi-principal element alloys (MPEAs) are novel alloys that may offer enhanced surface and mechanical properties compared with commercial metallic alloys. However, their biocompatibility has not been investigated. In this study, three CoCrFeNi-based MPEAs were fabricated, and the in vitro cytotoxicity was evaluated in direct contact with fibroblasts for 168 h. The cell viability and cell number were assessed at 24, 96, and 168 h using LIVE/DEAD assay and alamarBlue assay, respectively. All MPEA sample wells had a high percentage of viable cells at each time point. The two quaternary MPEAs demonstrated a similar cell response to stainless steel control with the alamarBlue assay, while the quinary MPEA with Mn had a lower cell number after 168 h. Fibroblasts cultured with the MPEA samples demonstrated a consistent elongated morphology, while those cultured with the Ni control samples demonstrated changes in cell morphology after 24 h. No significant surface corrosion was observed on the MPEAs or stainless steel samples following the cell culture, while the Ni control samples had extensive corrosion. The cell growth and viability results demonstrate the cytocompatibility of the MPEAs. The biocompatibility of MPEAs should be investigated further to determine if MPEAs may be utilized in orthopedic implants and other biomedical applications.

Transition-Metal Decorated Aluminum Nanocrystals.

Recently, aluminum has been established as an earth-abundant alternative to gold and silver for plasmonic applications. Particularly, aluminum nanocrystals have shown to be promising plasmonic photocatalysts, especially when coupled with catalytic metals or oxides into "antenna-reactor" heterostructures. Here, a simple polyol synthesis is presented as a flexible route to produce aluminum nanocrystals decorated with eight varieties of size-tunable transition-metal nanoparticle islands, many of which have precedence as heterogeneous catalysts. High-resolution and three-dimensional structural analysis using scanning transmission electron microscopy and electron tomography shows that abundant nanoparticle island decoration in the catalytically relevant few-nanometer size range can be achieved, with many islands spaced closely to their neighbors. When coupled with the Al nanocrystal plasmonic antenna, these small decorating islands will experience increased light absorption and strong hot-spot generation. This combination makes transition-metal decorated aluminum nanocrystals a promising material platform to develop plasmonic photocatalysis, surface-enhanced spectroscopies, and quantum plasmonics.

Lead optimization toward proof-of-concept tools for Huntington's disease within a 4-(1H-pyrazol-4-yl)pyrimidine class of pan-JNK inhibitors.

Through medicinal chemistry lead optimization studies focused on calculated properties and guided by X-ray crystallography and computational modeling, potent pan-JNK inhibitors were identified that showed submicromolar activity in a cellular assay. Using in vitro ADME profiling data, 9t was identified as possessing favorable permeability and a low potential for efflux, but it was rapidly cleared in liver microsomal incubations. In a mouse pharmacokinetics study, compound 9t was brain-penetrant after oral dosing, but exposure was limited by high plasma clearance. Brain exposure at a level expected to support modulation of a pharmacodynamic marker in mouse was achieved when the compound was coadministered with the pan-cytochrome P450 inhibitor 1-aminobenzotriazole.

Leporizines A-C: epithiodiketopiperazines isolated from an Aspergillus species.

Three new compounds named leporizines A-C have been isolated from an Aspergillus sp. strain. Their structures were elucidated by analysis of 1D and 2D NMR spectra. Leporizines A and B were isolated during dereplication of hits from a high-throughput screening campaign for correctors of the cystic fibrosis transmembrane conductance regulator (CFTR), and leporizine C was isolated while preparing additional material for characterization of leporizines A and B. CFTR activity observed for leporizines A and B was highly correlated with cell toxicity and was determined to be a nonspecific effect. Leporizine C was not cytotoxic to cells and did not elicit a response in the CFTR assays. To the best of our knowledge, leporizines A-C represent the first examples of this unusual epithiodiketopiperazine skeleton.