Non-Contact Universal Sample Presentation for Room Temperature Macromolecular Crystallography Using Acoustic Levitation.

Macromolecular Crystallography is a powerful and valuable technique to assess protein structures. Samples are commonly cryogenically cooled to minimise radiation damage effects from the X-ray beam, but low temperatures hinder normal protein functions and this procedure can introduce structural artefacts. Previous experiments utilising acoustic levitation for beamline science have focused on Langevin horns which deliver significant power to the confined droplet and are complex to set up accurately. In this work, the low power, portable TinyLev acoustic levitation system is used in combination with an approach to dispense and contain droplets, free of physical sample support to aid protein crystallography experiments. This method facilitates efficient X-ray data acquisition in ambient conditions compatible with dynamic studies. Levitated samples remain free of interference from fixed sample mounts, receive negligible heating, do not suffer significant evaporation and since the system occupies a small volume, can be readily installed at other light sources.

Extensive Vibrational Characterisation and Long-Term Monitoring of Honeybee Dorso-Ventral Abdominal Vibration signals.

A very common honeybee signal is the dorso-ventral abdominal vibration (DVAV) signal, widely accepted as a modulatory signal meaning: "prepare for greater activity". In this study, using ultra-sensitive accelerometer technology embedded in the honeycomb, we visually confirm the one-to-one relationship between a DVAV signal being produced and the resulting accelerometer waveform, allowing the measurement of DVAV signals without relying on any visual inspection. We then demonstrate a novel method for the continuous in-situ non-invasive automated monitoring of this honeybee signal, not previously known to induce any vibration into the honeycomb, and most often inaudible to human hearing. We monitored a total of three hives in the UK and France, showing that the signal is very common, highly repeatable and occurs more frequently at night, exhibiting a distinct decrease in instances and increase in amplitude towards mid-afternoon. We also show an unprecedented increase in the cumulative amplitude of DVAV signals occurring in the hours preceding and following a primary swarm. We conclude that DVAV signals may have additional functions beyond solely being a foraging activation signal, and that the amplitude of the signal might be indicative of the switching of its purpose.

An acoustic on-chip goniometer for room temperature macromolecular crystallography.

This paper describes the design, development and successful use of an on-chip goniometer for room-temperature macromolecular crystallography via acoustically induced rotations. We present for the first time a low cost, rate-tunable, acoustic actuator for gradual in-fluid sample reorientation about varying axes and its utilisation for protein structure determination on a synchrotron beamline. The device enables the efficient collection of diffraction data via a rotation method from a sample within a surface confined droplet. This method facilitates efficient macromolecular structural data acquisition in fluid environments for dynamical studies.

Liquid marbles: topical context within soft matter and recent progress.

The study of particle stabilized interfaces has a long history in terms of emulsions, foams and related dry powders. The same underlying interfacial energy principles also allow hydrophobic particles to encapsulate individual droplets into a stable form as individual macroscopic objects, which have recently been called "Liquid Marbles". Here we discuss conceptual similarities to superhydrophobic surfaces, capillary origami, slippery liquids-infused porous surfaces (SLIPS) and Leidenfrost droplets. We provide a review of recent progress on liquid marbles, since our earlier Emerging Area article (Soft Matter, 2011, 7, 5473-5481), and speculate on possible future directions from new liquid-infused liquid marbles to microarray applications. We highlight a range of properties of liquid marbles and describe applications including detecting changes in physical properties (e.g. pH, UV, NIR, temperature), use for gas sensing, synthesis of compounds/composites, blood typing and cell culture.

Dielectrowetting driven spreading of droplets.

The wetting of solid surfaces can be modified by altering the surface free energy balance between the solid, liquid, and vapor phases. Here we show that liquid dielectrophoresis induced by nonuniform electric fields can be used to enhance and control the wetting of dielectric liquids. In the limit of thick droplets, we show theoretically that the cosine of the contact angle follows a simple voltage squared relationship analogous to that found for electrowetting on dielectric. Experimental observations confirm this predicted dielectrowetting behavior and show that the induced wetting is reversible. Our findings provide a noncontact electrical actuation process for meniscus and droplet control.

Small volume laboratory on a chip measurements incorporating the quartz crystal microbalance to measure the viscosity-density product of room temperature ionic liquids.

A microfluidic glass chip system incorporating a quartz crystal microbalance (QCM) to measure the square root of the viscosity-density product of room temperature ionic liquids (RTILs) is presented. The QCM covers a central recess on a glass chip, with a seal formed by tightly clamping from above outside the sensing region. The change in resonant frequency of the QCM allows for the determination of the square root viscosity-density product of RTILs to a limit of approximately 10 kg m(-2) s(-0.5). This method has reduced the sample size needed for characterization from 1.5 ml to only 30 mul and allows the measurement to be made in an enclosed system.

Levitation-free vibrated droplets: resonant oscillations of liquid marbles.

A spherical conducting droplet in an alternating electric field is known to undergo shape oscillations. When the droplet is supported by a substrate, the shape is no longer a complete sphere, but shape resonances are still observed. To obtain a completely spherical droplet, some kind of levitation is needed, unless the droplet is in microgravity, and this has previously been provided by gas films or magnetic or other external forces. In this work, we report observations of shape oscillations of a hydrophobic-powder-coated droplet of water. A droplet of water rolled on a hydrophobic powder self-coats such that the water becomes encapsulated as a liquid marble. When the powder is a spherical hydrophobic grain with a contact angle greater than 90 degrees , it adheres to the solid-water interface with more than half of its diameter projecting from the liquid, thus ensuring the encapsulated water does not come into contact with any substrate. These liquid marbles are highly mobile and can be regarded as completely nonwetting droplets possessing contact angles of 180 degrees . In this work, we show that they also provide a new mechanism equivalent to levitating droplets and provide droplets with small contact areas and completely mobile contact lines for studies of shape oscillations. Liquid marbles were created using hydrophobic lycopodium and droplets of water containing potassium chloride and were excited into motion using an electrowetting-on-dielectric configuration with applied frequency swept from 1 to 250 Hz. Both an up-and-down motion and an oscillation involving multiple nodes were observed and recorded using a high-speed camera. The resonant oscillation modes of small liquid marbles were fitted to the theory for vibrations of a free spherical volume of fluid. This work demonstrates the principle that oscillation modes of completely nonwetting droplets can be studied using a simple powder coating approach without the need for an active mechanism for levitation.

Evaluation of a microfluidic device for the electrochemical determination of halide content in ionic liquids.

A microfluidic device designed for electrochemical studies on a microliter scale has been utilized for the examination of impurity levels in ionic liquids (ILs). Halide impurities are common following IL synthesis, and this study demonstrates the ability to quantify low concentrations of halide in a range of ILs to levels of approximately 5 ppm, even in ILs not currently measurable using other methods such as ion chromatography. To validate the mixer device, the electrochemistry of ferrocene was also examined and compared with spectroscopic and bulk electrochemistry measurements. An automated "sample preparation, delivery, and calibration" method was developed, and the chip successfully used for linear sweep, cyclic voltammetry (under both quiescent and steady-state flowing conditions), square wave voltammetry, and differential pulse voltammetry. An effective method of electrochemically cleaning the electrodes is also presented.

Learning from superhydrophobic plants: the use of hydrophilic areas on superhydrophobic surfaces for droplet control.

In many countries, the mornings in spring are graced with spectacular displays of dew drops hanging on spiders' webs and on leaves. Some leaves, in particular, sport particularly large droplets that last well into the morning. In this paper, we study a group of plants that show this effect on their superhydrophobic leaves to try to discover how and why they do it. We describe the structures they use to gather droplets and suggest that these droplets are used as a damper to absorb kinetic energy allowing water to be redirected from sideways motion into vertical motion. Model surfaces in the shape of leaves and as more general flat sheets show that this principle can be used to manipulate water passively, such as on the covers of solar panels, and could also be used in parts of microfluidic devices. The mode of transport can be switched between rolling droplets and rivulets to maximize control.

Nano-scale superhydrophobicity: suppression of protein adsorption and promotion of flow-induced detachment.

Wall adsorption is a common problem in microfluidic devices, particularly when proteins are used. Here we show how superhydrophobic surfaces can be used to reduce protein adsorption and to promote desorption. Hydrophobic surfaces, both smooth and having high surface roughness of varying length scales (to generate superhydrophobicity), were incubated in protein solution. The samples were then exposed to flow shear in a device designed to simulate a microfluidic environment. Results show that a similar amount of protein adsorbed onto smooth and nanometer-scale rough surfaces, although a greater amount was found to adsorb onto superhydrophobic surfaces with micrometer scale roughness. Exposure to flow shear removed a considerably larger proportion of adsorbed protein from the superhydrophobic surfaces than from the smooth ones, with almost all of the protein being removed from some nanoscale surfaces. This type of surface may therefore be useful in environments, such as microfluidics, where protein sticking is a problem and fluid flow is present. Possible mechanisms that explain the behaviour are discussed, including decreased contact between protein and surface and greater shear stress due to interfacial slip between the superhydrophobic surface and the liquid.

Decoupling of the liquid response of a superhydrophobic quartz crystal microbalance.

Recent reports using particle image velocimetry and cone-and-plate rheometers have suggested that a simple Newtonian liquid flowing across a superhydrophobic surface demonstrates a finite slip length. Slippage on a superhydrophobic surface indicates that the combination of topography and hydrophobicity may have consequences for the coupling at the solid--liquid interface observed using the high-frequency shear-mode oscillation of a quartz crystal microbalance (QCM). In this work, we report on the response of a 5 MHz QCM possessing a superhydrophobic surface to immersion in water--glycerol mixtures. QCM surfaces were prepared with a layer of SU-8 photoresist and lithographically patterned to produce square arrays of 5 mum diameter circular cross-section posts spaced 10 microm center-to-center and with heights of 5, 10, 15, and 18 microm. Non-patterned layers were also created for comparison, and both non-hydrophobized and chemically hydrophobized surfaces were investigated. Contact angle measurements confirmed that the hydrophobized post surfaces were superhydrophobic. QCM measurements in water before and after applying pressure to force a Cassie-Baxter (non-penetrating) to Wenzel (penetrating) conversion of state showed a larger frequency decrease and higher dissipation in the Wenzel state. QCM resonance spectra were fitted to a Butterworth-van Dyke model for the full range of water-glycerol mixtures from pure water to (nominally) pure glycerol, thus providing data on both energy storage and dissipation. The data obtained for the post surfaces show a variety of types of behavior, indicating the importance of the surface chemistry in determining the response of the quartz crystal resonance, particularly on topographically structured surfaces; data for hydrophobized post surfaces imply a decoupling of the surface oscillation from the mixtures. In the case of the 15 microm tall hydrophobized post surfaces, crystal resonance spectra become narrower as the viscosity-density product increases, which is contrary to the usual behavior. In the most extreme case of the 18 microm tall hydrophobized post surfaces, both the frequency decrease and bandwidth increase of the resonance spectra are significantly lower than that predicted by the Kanazawa and Gordon model, thus implying a decoupling of the oscillating surface from the liquid, which can be interpreted as interfacial slip.

Electrowetting of nonwetting liquids and liquid marbles.

Transport of a water droplet on a solid surface can be achieved by differentially modifying the contact angles at either side of the droplet using capacitive charging of the solid-liquid interface (i.e., electrowetting-on-dielectric) to create a driving force. Improved droplet mobility can be achieved by modifying the surface topography to enhance the effects of a hydrophobic surface chemistry and so achieve an almost complete roll-up into a superhydrophobic droplet where the contact angle is greater than 150 degrees . When electrowetting is attempted on such a surface, an electrocapillary pressure arises which causes water penetration into the surface features and an irreversible conversion to a state in which the droplet loses its mobility. Irreversibility occurs because the surface tension of the liquid does not allow the liquid to retract from these fixed surface features on removal of the actuating voltage. In this work, we show that this irreversibility can be overcome by attaching the solid surface features to the liquid surface to create a liquid marble. The solid topographic surface features then become a conformable "skin" on the water droplet both enabling it to become highly mobile and providing a reversible liquid marble-on-solid system for electrowetting. In our system, hydrophobic silica particles and hydrophobic grains of lycopodium are used as the skin. In the region corresponding to the solid-marble contact area, the liquid marble can be viewed as a liquid droplet resting on the attached solid grains (or particles) in a manner similar to a superhydrophobic droplet resting upon posts fixed on a solid substrate. When a marble is placed on a flat solid surface and electrowetting performed it spreads but with the water remaining effectively suspended on the grains as it would if the system were a droplet of water on a surface consisting of solid posts. When the electrowetting voltage is removed, the surface tension of the water droplet causes it to ball up from the surface but carrying with it the conformable skin. A theoretical basis for this electrowetting of a liquid marble is developed using a surface free energy approach.

Layer guided-acoustic plate mode biosensors for monitoring MHC-peptide interactions.

The transduction signals from the immobilisation of a class I heavy chain, HLA-A2, on a layer guided acoustic plate mode device, followed by binding of beta(2)-microglobulin and subsequent selective binding of a target peptide are reported.

Analysis of droplet evaporation on a superhydrophobic surface.

The evaporation process for small, 1-2-mm-diameter droplets of water from patterned polymer surfaces is followed and characterized. The surfaces consist of circular pillars (5-15 microm diameter) of SU-8 photoresist arranged in square lattice patterns such that the center-to-center separation between pillars is 20-30 microm. These types of surface provide superhydrophobic systems with theoretical initial Cassie-Baxter contact angles for water droplets of up to 140-167 degrees, which are significantly larger than can be achieved by smooth hydrophobic surfaces. Experiments show that on these SU-8 textured surfaces water droplets initially evaporate in a pinned contact line mode, before the contact line recedes in a stepwise fashion jumping from pillar to pillar. Provided the droplets of water are deposited without too much pressure from the needle, the initial state appears to correspond to a Cassie-Baxter one with the droplet sitting upon the tops of the pillars. In some cases, but not all, a collapse of the droplet into the pillar structure occurs abruptly. For these collapsed droplets, further evaporation occurs with a completely pinned contact area consistent with a Wenzel-type state. It is shown that a simple quantitative analysis based on the diffusion of water vapor into the surrounding atmosphere can be performed, and estimates of the product of the diffusion coefficient and the concentration difference (saturation minus ambient) are obtained.

Wetting and wetting transitions on copper-based super-hydrophobic surfaces.

Rough and patterned copper surfaces were produced using etching and, separately, using electrodeposition. In both of these approaches the roughness can be varied in a controlled manner and, when hydrophobized, these surfaces show contact angles that increase with increasing roughness to above 160 degrees . We show transitions from a Wenzel mode, whereby the liquid follows the contours of the copper surface, to a Cassie-Baxter mode, whereby the liquid bridges between features on the surface. Measured contact angles on etched samples could be modeled quantitatively to within a few degrees by the Wenzel and Cassie-Baxter equations. The contact angle hysteresis on these surfaces initially increased and then decreased as the contact angle increased. The maximum occurred at a surface area where the equilibrium contact angle would suggest that a substantial proportion of the surface area was bridged.

Contact-angle hysteresis on super-hydrophobic surfaces.

The relationship between perturbations to contact angles on a rough or textured surface and the super-hydrophobic enhancement of the equilibrium contact angle is discussed theoretically. Two models are considered. In the first (Wenzel) case, the super-hydrophobic surface has a very high contact angle and the droplet completely contacts the surface upon which it rests. In the second (Cassie-Baxter) case, the super-hydrophobic surface has a very high contact angle, but the droplet bridges across surface protrusions. The theoretical treatment emphasizes the concept of contact-angle amplification or attenuation and distinguishes between the increases in contact angles due to roughening or texturing surfaces and perturbations to the resulting contact angles. The theory is applied to predicting contact-angle hysteresis on rough surfaces from the hysteresis observable on smooth surfaces and is therefore relevant to predicting roll-off angles for droplets on tilted surfaces. The theory quantitatively predicts a "sticky" surface for Wenzel-type surfaces and a "slippy" surface for Cassie-Baxter-type surfaces.

Topography driven spreading.

Roughening a hydrophobic surface enhances its nonwetting properties into superhydrophobicity. For liquids other than water, roughness can induce a complete rollup of a droplet. However, topographic effects can also enhance partial wetting by a given liquid into complete wetting to create superwetting. In this work, a model system of spreading droplets of a nonvolatile liquid on surfaces having lithographically produced pillars is used to show that superwetting also modifies the dynamics of spreading. The edge speed-dynamic contact angle relation is shown to obey a simple power law, and such power laws are shown to apply to naturally occurring surfaces.

Application of the quartz crystal microbalance to the evaporation of colloidal suspension droplets.

An investigation into the evaporation of sessile droplets of latex and clay particle suspensions is presented in this work. The quartz crystal microbalance (QCM) has been used to study the interfacial phenomena during the drying process of these droplets. Characteristic changes of the crystal oscillating frequency and crystal resistance (damping of the oscillating energy) have been observed and related to the different stages of the evaporation process. Measurements have been made for latex particle sizes from 1.9 to 10 microm and for rough and polished crystals using drops from 0.3 to 1.5 microL. The behavior of the QCM is shown to depend strongly on the size of particles present and on the morphology of the crystal surface. One of the most striking features is a drastic damping of the oscillation energy and corresponding rise in frequency observed during the final stages of evaporation, particularly for the clay suspensions.

Detection of polycyclic aromatic hydrocarbons using quartz crystal microbalances.

A chemically coated piezoelectric sensor has been developed for the determination of PAHs in the liquid phase. An organic monolayer attached to the surface of a gold electrode of a quartz crystal microbalance (QCM) via a covalent thiol-gold link complete with an ionically bound recognition element has been produced. This study has employed the PAH derivative 9-anthracene carboxylic acid which, once bound to the alkane thiol, functions as the recognition element. Binding of anthracene via pi-pi interaction has been observed as a frequency shift in the QCM with a detectability of the target analyte of 2 ppb and a response range of 0-50 ppb. The relative response of the sensor altered for different PAHs despite pi-pi interaction being the sole communication between recognition element and analyte. It is envisaged that such a sensor could be employed in the identification of key marker compounds and, as such, give an indication of total PAH flux in the environment.

Molecular imprinted polymer coated QCM for the detection of nandrolone.

An acoustic wave sensor coated with an artificial biomimetic recognition element has been developed to selectively screen for nandrolone in the liquid phase. A highly specific covalently imprinted polymer (MIP) was spin coated onto one electrode of a quartz crystal microbalance (QCM) as a thin permeable film. Selective rebinding of the nandrolone was observed as a frequency shift in the QCM for concentrations up to 0.2 ppm with the sensor binding shown to favour nandrolone over analogous compounds.