Enhanced skin penetration of berberine from proniosome gel attenuates pain and inflammation in a mouse model of osteoarthritis.

Dermal delivery of bioactive molecules remains an attractive route of administration in osteoarthritis (OA) due to the local accumulation of drugs while avoiding their systemic side effects. In this study we propose a proniosome gel comprising non-ionic surfactants that self-assemble into de-hydrated vesicles for the delivery of the natural anti-inflammatory compound berberine. By modulating the hydrating ability of the proniosome gel, berberine can be efficiently released with minimal mechanical force. A combination of sorbitan oleate (S80) and polyethlene glycol sorbitan monolaurate (T20) in a sorbitan stearate (S60)-based proniosome enables a readily hydrated gel to deliver berberine into the skin, as confirmed by ex vivo skin permeation studies. Concurrently, an in vitro model of OA using primary mouse chondrocytes demonstrated that the release of berberine at a concentration as low as 1 µg mL-1 is sufficient to restore the production of sulphated glycosaminoglycans (sGAG) to levels comparable to healthy chondrocytes while avoiding the cytotoxic concentrations (IC50 = 33 µg mL-1) on skin keratinocytes. In a mouse model of OA, the optimized formulation is able to attenuate inflammation and pain and minimize cartilage degeneration. Taken together, these data demonstrate the feasibility of adopting proniosome gels as a suitable platform to deliver active molecules for the management of osteoarthritis.

Artemether-Loaded Zein Nanoparticles: An Innovative Intravenous Dosage Form for the Management of Severe Malaria.

Artemether, an artemisinin derivative, is used in the management of life-threatening severe malaria. This study aimed to develop an intravenous dosage form of artemether using nanotechnology. Artemether-loaded zein nanoparticles were prepared by modified antisolvent precipitation using sodium caseinate as a stabilizer. Subsequently, the physicochemical properties of the nanoparticles were characterized; the in vitro hemolytic property was examined with red blood cells, while the pharmacokinetic profile was evaluated in Sprague-Dawley rats after intravenous administration. The artemether-loaded zein nanoparticles were found to display good encapsulation efficiency, excellent physical stability and offer an in vitro extended-release property. Interestingly, encapsulation of artemether into zein nanoparticles substantially suppressed hemolysis, a common clinical phenomenon occurring after artemisinin-based antimalarial therapy. Upon intravenous administration, artemether-loaded zein nanoparticles extended the mean residence time of artemether by ~80% in comparison to the free artemether formulation (82.9 ± 15.2 versus 45.6 ± 16.4 min, p < 0.01), suggesting that the nanoparticles may prolong the therapeutic duration and reduce the dosing frequency in a clinical setting. In conclusion, intravenous delivery of artemether by artemether-loaded zein nanoparticles appears to be a promising therapeutic option for severe malaria.

Preparation, Characterization and Prevention of Auto-oxidation of Amorphous Sirolimus by Encapsulation in Polymeric Films Using Hot Melt Extrusion.

BACKGROUND: Sirolimus (SIR) is a macrocyclic lactone antibiotic and used therapeutically as a potent immunosuppressant for prophylaxis of kidney transplant rejection. The development of an oral dosage form is challenging because of very poor aqueous solubility (2.6µg/ml). The oral bioavailability of SIR is only 15-20 % and is affected by food and other drugs. The main reasons for low bioavailability are intestinal degradation by enzymes especially by cytochrome P4503A4, efflux by P-glycoprotein and hepatic first-pass metabolism. OBJECTIVE: The main objective was to prepare a mouth dissolving film dosage form of amorphous SIR to improve dissolution. METHODS: Crystalline SIR was transformed to its form amorphous by milling for 2 h at room temperature. Thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and powder x-ray diffraction (PXRD) were used for characterisation. The stability of amorphous SIR was studied at 4°C and 40°C/75% RH. Amorphous SIR was formulated as oral films by melt extrusion with polyvinylpyrrolidone- vinyl acetate (PVP-VA), Soluplus® and hydroxypropyl cellulose (HPC) as carriers. The films were characterized for drug content, physical state, dissolution profile and stability at 4°C and 40°C/75% RH. RESULTS: The PRXD and DSC confirmed the conversion of crystalline SIR to amorphous form by milling. The solubility of amorphous SIR was several folds higher than its crystalline form, but amorphous SIR was highly unstable at all tested temperatures (4° and 40°C). The extruded films exhibited higher dissolution and stability compared to milled SIR powder alone, but the process of extrusion had some detrimental effect on the chemical stability of amorphous SIR. CONCLUSION: The film formulations showed a significant improvement in the storage stability of the amorphous form of SIR and the solubility advantage of the amorphous form was evident in the dissolution testing. The oral films can potentially improve the bioavailability of SIR by absorption through the buccal mucosa.

Orally Disintegrating Tablets Containing Melt Extruded Amorphous Solid Dispersion of Tacrolimus for Dissolution Enhancement.

In order to improve the aqueous solubility and dissolution of Tacrolimus (TAC), amorphous solid dispersions of TAC were prepared by hot melt extrusion with three hydrophilic polymers, Polyvinylpyrrolidone vinyl acetate (PVP VA64), Soluplus® and Hydroxypropyl Cellulose (HPC), at a drug loading of 10% w/w. Molecular modeling was used to determine the miscibility of the drug with the carrier polymers by calculating the Hansen Solubility Parameters. Powder X-ray diffraction and differential scanning calorimetry (DSC) studies of powdered solid dispersions revealed the conversion of crystalline TAC to amorphous form. Fourier transform Infrared (FTIR) spectroscopy results indicated formation of hydrogen bond between TAC and polymers leading to stabilization of TAC in amorphous form. The extrudates were found to be stable under accelerated storage conditions for 3 months with no re-crystallization, indicating that hot melt extrusion is suitable for producing stable amorphous solid dispersions of TAC in PVP VA64, Soluplus® and HPC. Stable solid dispersions of amorphous TAC exhibited higher dissolution rate, with the solid dispersions releasing more than 80% drug in 15 min compared to the crystalline drug giving 5% drug release in two hours. These stable solid dispersions were incorporated into orally-disintegrating tablets in which the solid dispersion retained its solubility, dissolution and stability advantage.

Application of transglycosylated stevia and hesperidin as drug carriers to enhance biopharmaceutical properties of poorly-soluble artemisinin.

Biopharmaceutical properties of poorly water-soluble antimalarial drug, Artemisinin (ART), were improved by formulating amorphous solid dispersions with transglycosylated food additives (Hsp-G and Stevia-G) via co-spray drying. Both the formulated ART/Hsp-G and ART/Stevia-G showed superior dissolution properties with a burst release of more than 95% of drug within 5 min, whereas untreated ART dissolved only 4% in 5min. The supersaturation solubility of the formulated ART was enhanced by 2-fold as compared with untreated counterpart. The storage stability tests indicated that these formulations chemically stable at room temperature and under low humidity (<18% RH) conditions. However, high humidity (75% RH) induced re-crystallization and caused changes in the physical appearance of the solid dispersions. In addition, both the food additives and ART formulated samples showed low cytotoxicity to Caco-2 cell line suggesting their good biocompatibility. Thus, the formation of solid dispersions of ART with transglycosylated food additives is a potentially safe and effective approach to enhance the bioavailability of poorly water-soluble ART.

Mechanical properties and antibiotic release characteristics of poly(methyl methacrylate)-based bone cement formulated with mesoporous silica nanoparticles.

The influence of mesoporous silica nanoparticles (MSNs) loaded with antibiotics on the mechanical properties of functional poly(methyl methacrylate)-(PMMA) based bone cements is investigated. The incorporation of MSNs to the bone cements (8.15wt%) shows no detrimental effects on the biomechanical properties of the freshly solidified bone cements. Importantly, there are no significant changes in the compression strength and bending modulus up to 6 months of aging in PBS buffer solution. The preserved mechanical properties of MSN-functionalized bone cements is attributed to the unchanged microstructures of the cements, as more than 96% of MSNs remains in the bone cement matrix to support the cement structures after 6 months of aging. In addition, the MSN-functionalized bone cements are able to increase the drug release of gentamicin (GTMC) significantly as compared with commercially available antibiotic-loaded bone cements. It can be attributed to the loaded nano-sized MSNs with uniform pore channels which build up an effective nano-network path enable the diffusion and extended release of GTMC. The combination of excellent mechanical properties and sustainable drug delivery efficiency demonstrates the potential applicability of MSN-functionalized PMMA bone cements for orthopedic surgery to prevent post-surgery infection.

Dissolution and physicochemical stability enhancement of artemisinin and mefloquine co-formulation via nano-confinement with mesoporous SBA-15.

The objective of this study is to enhance the dissolution rate, supersaturation and physicochemical stability of combination of two poorly water-soluble anti-malarial drugs, artemisinin (ART) and mefloquine (MFQ), by encapsulating them inside mesoporous silica (SBA-15) via co-spray drying. Characteristic studies such as powder X-ray diffraction (PXRD), transmission electron microscopy (TEM) and scanning electron microscope (SEM) clearly indicate the amorphization of the crystalline drugs. ART/MQF/SBA-15 formulations show a superior dissolution enhancement with a burst release of more than 95% of drugs within 30min. In addition, the combination formulation exhibits a stable supersaturation enhancement by 2-fold higher than that of the untreated crystalline counterparts. ART/MQF/SBA-15 samples possess excellent physicochemical stability under 2 different moderate storage conditions for 6 months. The amorphization of ART and MFQ via nano-confinement using mesoporous SBA-15 is a potentially promising approach to enhance the solubility of poorly water-soluble anti-malarial drugs that co-formulated into a single dosage form.

Preparation and characterization of quercetin/dietary fiber nanoformulations.

Quercetin is well known for its beneficial health effects on the human body. However, the slow dissolution rate leading to poor bioavailability constitutes a barrier to being further developed for nutritional products. In this work, quercetin was co-precipitated with dietary fibers into a fast-dissolving nanoformulation via antisolvent precipitation, followed by spray drying. With the help of cellulose fiber, resistant starch or resistant maltodextrin, a high dissolution rate and good storage stability was achieved for quercetin nanoformulations. In addition, nanoformulations exhibited higher level of antioxidant activities in contrast to raw quercetin. The developed quercetin/dietary fiber nanoformulations could be used as supplements or functional ingredients for food development.

Hot-melt extrusion microencapsulation of quercetin for taste-masking.

Besides its poor dissolution rate, the bitterness of quercetin also poses a challenge for further development. Using carnauba wax, shellac or zein as the shell-forming excipient, this work aimed to microencapsulate quercetin by hot-melt extrusion for taste-masking. In comparison with non-encapsulated quercetin, the microencapsulated powders exhibited significantly reduced dissolution in the simulated salivary pH 6.8 medium indicative of their potentially good taste-masking efficiency in the order of zein > carnauba wax > shellac. In vitro bitterness analysis by electronic tongue confirmed the good taste-masking efficiency of the microencapsulated powders. In vitro digestion results showed that carnauba wax and shellac-microencapsulated powders presented comparable dissolution rate with the pure quercetin in pH 1.0 (gastric) and 6.8 (intestine) medium; while zein-microencapsulated powders exhibited a remarkably slower dissolution rate. Crystallinity of quercetin was slightly reduced after microencapsulation while its chemical structure remained unchanged. Hot-melt extrusion microencapsulation could thus be an attractive technique to produce taste-masked bioactive powders.

Tailored Antibiotic Combination Powders for Inhaled Rotational Antibiotic Therapy.

Respiratory lung infections due to multidrug-resistant (MDR) superbugs are on a global upsurge and have very grim clinical outcomes. Their MDR profile makes therapeutic options extremely limited. Although a highly toxic antibiotic, colistin, is favored today as a "last-line" therapeutic against these hard-to-treat MDR pathogens, it is fast losing its effectiveness. This work therefore seeks to identify and tailor-make useful combination regimens (that are potentially rotatable and synergistic) as attractive alternative strategies to address the rising rates of drug resistance. Three potentially rotatable ternary dry powder inhaler constructs (each involving colistin and 2 other different-classed antibiotics chosen from rifampicin, meropenem, and tigecycline) were identified (with distinct complementary killing mechanisms), coformulated via spray drying, evaluated on their aerosol performance using a Next-Generation Impactor and tested for their efficacies against a number of MDR pathogens. The powder particles were of respirable size (d50, 3.1 ± 0.3 µm-3.4 ± 0.1 µm) and predominantly crumpled in morphology. When dispersed via a model dry powder inhaler (Aerolizer(®)) at 60 L/min, the powders showed concomitant in vitro deposition with fine particle fractions of ∼53%-70%. All formulations were successfully tested in the laboratory to be highly effective against the MDR pathogens. In addition, a favorable synergistic interaction was detected across all 3 formulations when tested against MDR Pseudomonas aeruginosa.

Plant polyphenols to enhance the nutritional and sensory properties of chocolates.

A relatively unexplored method to enhance the sensory and nutritional properties of chocolate is to use plant polyphenols. In this study, a low cost agricultural waste product - mangosteen (Garcinia mangostana Linn.) pericarp - was added as powder in graded amounts (1%, 2% and 3%w/w) to dark and compound chocolates during the mixing stage and evaluated. The particle size distributions of the chocolates were mostly within 30 µm and the chocolates displayed a homogeneous morphology. The polyphenols (procyanidins and xanthones) in mangosteen pericarp powder were also stable to simulated chocolate processing. The 3% pericarp powder concentration significantly expanded the bioactive profile and total phenolic content (13% in dark chocolates and 50% in compound chocolates) compared to their plain counterparts without affecting sensory qualities. Such low cost plant polyphenols could enhance the bioactive and flavor profile of chocolates, especially in low cocoa content compound chocolates.

Nanostructured material formulated acrylic bone cements with enhanced drug release.

To improve antibiotic properties, poly(methyl methacrylate) (PMMA)-based bone cements are formulated with antibiotic and nanostructured materials, such as hydroxyapatite (HAP) nanorods, carbon nanotubes (CNT) and mesoporous silica nanoparticles (MSN) as drug carriers. For nonporous HAP nanorods, the release of gentamicin (GTMC) is not obviously improved when the content of HAP is below 10%; while the high content of HAP shows detrimental to mechanical properties although the release of GTMC can be substantially increased. As a comparison, low content of hollow nanostructured CNT and MSN can enhance drug delivery efficiency. The presence of 5.3% of CNT in formulation can facilitate the release of more than 75% of GTMC in 80 days, however, its mechanical strength is seriously impaired. Among nanostructured drug carriers, antibiotic/MSN formulation can effectively improve drug delivery and exhibit well preserved mechanical properties. The hollow nanostructured materials are believed to build up nano-networks for antibiotic to diffuse from the bone cement matrix to surface and achieve sustained drug release. Based on MSN drug carrier in formulated bone cement, a binary delivery system is also investigated to release GTMC together with other antibiotics.

High drug load, stable, manufacturable and bioavailable fenofibrate formulations in mesoporous silica: a comparison of spray drying versus solvent impregnation methods.

Encapsulation of drugs in mesoporous silica using co-spray drying process has been recently explored as potential industrial method. However, the impact of spray drying on manufacturability, physiochemical stability and bioavailability in relation to conventional drug load processes are yet to be fully investigated. Using a 2(3) factorial design, this study aims to investigate the effect of drug-loading process (co-spray drying and solvent impregnation), mesoporous silica pore size (SBA-15, 6.5 nm and MCM-41, 2.5 nm) and percentage drug load (30% w/w and 50% w/w) on material properties, crystallinity, physicochemical stability, release profiles and bioavailability of fenofibrate (FEN) loaded into mesoporous silica. From the scanning electronic microscopy (SEM) images, powder X-ray diffraction and Differential scanning calorimetry measurements, it is indicated that the co-spray drying process was able to load up to 50% (w/w) FEN in amorphous form onto the mesoporous silica as compared to the 30% (w/w) for solvent impregnation. The in vitro dissolution rate of the co-spray dried formulations was also significantly (p = 0.044) better than solvent impregnated formulations at the same drug loading. Six-month accelerated stability test at 40 °C/75 RH in open dish indicated excellent physical and chemical stability of formulations prepared by both methods. The amorphous state of FEN and the enhanced dissolution profiles were well preserved, and very low levels of degradation were detected after storage. The dog data for the three selected co-spray-dried formulations revealed multiple fold increment in FEN bioavailability compared to the reference crystalline FEN. These results validate the viability of co-spray-dried mesoporous silica formulations with high amorphous drug load as potential drug delivery systems for poorly water soluble drugs.

Controlled Release Inhalable Polymeric Microspheres for Treatment of Pulmonary Arterial Hypertension.

Pulmonary arterial hypertension (PAH) is a chronic ailment of the lungs, exhibiting elevated arterial pressure and vascular resistance; with a mean arterial pressure above 25 mmHg at rest and above 30 mmHg during exercise. It is associated with poor prognosis, and its prevalence is estimated to be 15 cases per one million. The current treatment options for PAH are discussed with the prostanoid class of drugs being the most effective. The latter drugs act by dilating systemic and pulmonary arterial vascular beds and, with sustained long-term usage, altering pulmonary remodelling. They are administered as IV infusions or inhalation solutions. Despite their clinical effectiveness, prostanoids have short half-lives requiring frequent administration of 6-9 times daily and thus suffer from poor compliance. Controlled release inhalation delivery systems for treatment of PAH, ranging from liposomes, biodegradable nano- and microparticles, formation of co-precipitates and complexation with cyclodextrins, are explored. Arising from these formulation strategies, we developed novel polymeric microspheres for inhalation to reduce dosing frequency and improve medication compliance. These microspheres are designed with release modifiers, to reside in the lung which is the site of drug action for a longer duration so as to release the drug slowly and consistently over a prolonged period. This could lead to the development of the first commercially available controlled release inhalation product.

Enhanced dissolution and stability of artemisinin by nano-confinement in ordered mesoporous SBA-15 particles.

Dissolution of poorly water-soluble drug, Artemisinin (ART), was enhanced by encapsulating the drug particles inside pore channels of ordered mesoporous silica, SBA-15, via co-spray drying. The drug release profiles of ART were investigated by using flow-through cell (USP IV) and in vitro dissolution tester (USP II). The co-spray-dried ART/SBA-15 samples demonstrated significantly improved dissolution rates and supersaturation compared to the untreated ART. The low cytotoxicity effect of ART and SBA-15 on Caco-2 cells after 24 h incubation demonstrated the biocompatibility of ART/SBA-15. Finally, the storage stability of the samples was investigated for 6 months under five different storage conditions. Overall, the solid dispersions exhibited excellent physical stability; however, their chemical stability was affected by humidity regardless of storage temperatures. The formulation of solid dispersions of ART/SBA-15 is potentially safe and an effective approach to enhance the solubility of poorly water-soluble ART.

A novel inhaled multi-pronged attack against respiratory bacteria.

Airway mucus hypersecretion is a common clinical feature of many severe respiratory diseases, and when complicated by a recalcitrant bacterial infection, the whole treatment regimen thereby becomes more challenging and protracted. The accumulation of thickened mucus secretions in the lower airways provides a nutrient-rich breeding ground for bacteria that promotes their growth and limits the ease of effective eradication. Unfortunately, no direct-inhaled dry powder formulation to treat these respiratory mucoid infections more effectively is available commercially. This work therefore seeks to develop a highly-efficacious ternary dry powder inhaler (DPI) formulation (ciprofloxacin hydrochloride (CIP), gatifloxacin hydrochloride (GAT) and ambroxol hydrochloride (AMB)) capable of delivering a novel multi-pronged attack (synergy, quorum quenching and mucociliary clearance) on Pseudomonas aeruginosa, a common respiratory bacteria found in mucoid infections. The powders were prepared via spray drying, evaluated on their aerosol performance via a multi-stage liquid impinger (MSLI) and tested for their efficacies in bacteria-spiked artificial sputum medium (ASM). The optimized particles were of respirable-size (d50 of ∼1.61±0.03µm) and slightly corrugated. When dispersed via an Aerolizer® inhaler at 60L/min, the powder showed concomitant in vitro deposition, minimal capsule, device and throat retention, and highly promising and uniform fine particle fractions (of the loaded dose) of ∼64-69%, which was a vast improvement over the singly-delivered actives. Favourably, when tested on bacteria-spiked ASM, the optimized ternary formulation (with AMB) was more effective at killing bacteria (i.e. faster rate of killing) than just the synergistic antibiotics alone (binary formulation; without AMB). In conclusion, a ternary antibiotic-(non-antibiotic) DPI formulation involving a unique multi-pronged attack mechanism was successfully pioneered and optimized for mucoid infections.

Clay as a matrix former for spray drying of drug nanosuspensions.

Utilization of sugars (e.g. lactose, sucrose) as matrix formers for spray drying of drug nanosuspensions is associated with two drawbacks: (1) sugars are incapable of preventing agglomeration of drug nanoparticles (NPs) in the suspension state; and (2) the spray-dried sugars are usually amorphous and hygroscopic. This work aimed to apply a clay, montmorillonite (MMT) as an alternative matrix former for spray drying of drug nanosuspensions with fenofibrate (feno) as a model compound. Drug nanosuspensions were synthesized by liquid antisolvent precipitation with different amount of MMT followed by spray drying. It is found that MMT is able to reduce the agglomeration of drug nanoparticles in the suspension state, as observed from the gradual alleviation of the clogging with the increased clay during the spray drying. The spray-dried feno NPs/MMT powders exhibited a much lower moisture sorption than spray-dried feno NPs/lactose powders as evidenced by the dynamic vapor sorption (DVS) analysis. The dissolution within 5 min for the spray-dried feno NPs/MMT powders at drug:MMT weight ratio of 1:3 was 81.4 ± 1.8% and the total dissolution within 60 min was 93.4 ± 0.9%. Our results demonstrate that MMT is a useful matrix former for preservation of the high dissolution rate of nanosized drug particles after drying.

Sucrose ester stabilized solid lipid nanoparticles and nanostructured lipid carriers. I. Effect of formulation variables on the physicochemical properties, drug release and stability of clotrimazole-loaded nanoparticles.

The objective of this study was to develop and evaluate solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs) utilizing sucrose ester as a stabilizer/emulsifier for the controlled release of drug/active. Both SLNs and NLCs were prepared using different sugar esters to screen out the most suitable stabilizer. Clotrimazole was used as a model active/drug. The effect of different formulation variables on the particle size, polydispersity index and drug encapsulation efficiency of SLNs and NLCs was evaluated and compared. SLNs and NLCs were physicochemically characterized and compared using Cryo-SEM, DSC and XRD. Furthermore, a drug release study of SLNs and NLCs was conducted. Finally, physicochemical stability (size, PI, ZP, EE) of the SLNs and NLCs was checked at 25 ± 2 °C and at 2-8 °C. Among the sucrose esters, D-1216 was found to be most suitable for both SLNs and NLCs. Formulation variables exhibited a significant impact on size, PI and EE of the nanoparticles. SLNs with ∼120 nm size, ∼0.23 PI, ∼I26I mV ZP, ∼87% EE and NLCs with ∼160 nm size, 0.15 PI, ∼I26I mV ZP, ∼88% EE were produced. Cryo-SEM revealed spherical particles with a smooth surface but did not exhibit any difference in surface morphology between SLNs and NLCs. DSC and XRD results demonstrated the disappearance of clotrimazole peak(s) in drug-loaded SLNs and NLCs. Faster drug release was observed from SLNs than NLCs. NLCs were found to be more stable than SLNs in terms of size, PI, EE and drug release. The results indicated that both SLNs and NLCs stabilized with sucrose ester D-1216 can be used as controlled release carriers although NLCs have an edge over SLNs.

Sucrose ester stabilized solid lipid nanoparticles and nanostructured lipid carriers. II. Evaluation of the imidazole antifungal drug-loaded nanoparticle dispersions and their gel formulations.

This study focused on: (i) feasibility of the previously developed sucrose ester stabilized SLNs and NLCs to encapsulate different imidazole antifungal drugs and (ii) preparation and evaluation of topical gel formulations of those SLNs and NLCs. Three imidazole antifungal drugs; clotrimazole, ketoconazole and climbazole were selected for this study. The results suggested that size, size distribution and drug encapsulation efficiency depend on the drug molecule and type of nanoparticles (SLN/NLC). The drug release experiment always showed faster drug release from NLCs than SLNs when the same drug molecule was loaded in both nanoparticles. However, drug release rate from both SLNs and NLCs followed the order of climbazole > ketoconazole > clotrimazole. NLCs demonstrated better physicochemical stability than SLNs in the case of all drugs. The drug release rate from ketoconazole- and clotrimazole-loaded SLNs became faster after three months than a fresh formulation. There was no significant change in drug release rate from climbazole-loaded SLNs and all drug-loaded NLCs. Gel formulations of SLNs and NLCs were prepared using polycarbophil polymer. Continuous flow measurements demonstrated non-Newtonian flow with shear-thinning behavior and thixotropy. Oscillation measurements depicted viscoelasticity of the gel formulations. Similar to nanoparticle dispersion, drug release rate from SLN- and NLC-gel was in the order of climbazole > ketoconazole > clotrimazole. However, significantly slower drug release was noticed from all gel formulations than their nanoparticle counterparts. Unlike nanoparticle dispersions, no significant difference in drug release from gel formulations containing SLNs and NLCs was observed for each drug. This study concludes that gel formulation of imidazole drug-loaded SLNs and NLCs can be used for sustained/prolonged topical delivery of the drugs.

Steroid-decorated antibiotic microparticles for inhaled anti-infective therapy.

Despite advances in vaccination and antimicrobial therapy, community-acquired pneumonia (CAP) remains as a leading cause of morbidity and mortality worldwide. As the severity of CAP has been linked to the extent of inflammation in the body, adjunctive therapeutic measures aimed at modulating the immune response have therefore become increasingly attractive in recent years. In particular, for CAP patients with underlying medical conditions such as chronic obstructive pulmonary disease (COPD), a steroid-antibiotic combination will no doubt be a useful and timely therapeutic intervention. Unfortunately, no combined steroid-antibiotic dry powder formulation is available commercially or has been reported in the academic literature. The aim of this work was hence to develop a novel steroid-antibiotic dry powder inhaler formulation [ciprofloxacin hydrochloride (CIP) and beclomethasone dipropionate (BP)] for inhaled anti-infective therapy. The spray-dried powder was of respirable size (d50 of ∼2.3 µm), partially crystalline and had BP preferentially deposited on the particle surface. Favorably, when formulated as a binary mix, both CIP and BP showed much higher drug release and fine particle fractions (of the loaded dose) over their singly delivered counterparts, and had robust activity against the respiratory tract infection-causing bacteria Klebsiella pneumoniae, Pseudomonas aeruginosa, and Staphylococcus aureus.