Selection of microalgae strains for sustainable production of aviation biofuel.

This study develops and applies the PROMETHEE-GAIA method as a new tool to select microalgae strains for aviation fuel production. Assessment involves 19 criteria with equal weighting in three aspects, namely biomass production, lipid quality, and fatty acid methylester properties. Here, the method is demonstrated for evaluating 17 candidate microalgae strains. Chlorella sp. NT8a is assessed as the most suitable strain for aviation fuel production. The results also show that unmodified biofuel from the most suitable strain could not meet all jet fuel standards. In particular, microalgae-based fuel could not satisfy the required density, heating value and freezing points of the international jet fuel standards. These results highlight the need for a broad action plan including improvement in the processing or modification of biofuel produced from microalgae and revision of the current jet fuel standards to facilitate the introduction of microalgae-based biofuel for the aviation industry.

A critical review on life cycle assessment and plant-wide models towards emission control strategies for greenhouse gas from wastewater treatment plants.

For decades, there has been a strong interest in mitigating greenhouse gas (GHG) emissions from wastewater treatment plants (WWTPs). Numerous models were developed to measure the emissions and propose the quantification. Existing studies looked at the relationship between GHG emissions and operational cost (OCI), which is one of the most important indicators for decision-makers. Other parameters that can influence the control strategies include the effluent quality (EQI) and total environmental impacts. Plant-wide models are reliable methods to examine the OCI, EQI and GHG emissions while Life cycle assessment (LCA) works to assess the potential environmental impacts. A combined LCA and plant-wide model proved to be a valuable tool evaluating and comparing strategies for the best performance of WWTPs. For this study involving a WWTP, the benchmark model is used while LCA is the decision tool to find the most suitable treatment strategy. LCA adds extra criteria that complement the existing criteria provided by such models. Complementing the cost/performance criteria is proposed for plant-wide models, including environmental evaluation, based on LCA, which provides an overall better assessment of WWTPs. It can capture both the dynamic effects and potential environmental impacts. This study provides an overview of the integration between plant-wide models and LCA.

A novel mechanistic model for nitrogen removal in algal-bacterial photo sequencing batch reactors.

A comprehensive mathematical model was constructed to evaluate the complex substrate and microbial interaction in algal-bacterial photo sequencing batch reactors (PSBR). The kinetics of metabolite, growth and endogenous respiration of ammonia oxidizing bacteria, nitrite oxidizing bacteria and heterotrophic bacteria were coupled to those of microalgae and then embedded into widely-used activated sludge model series. The impact of light intensity was considered for microalgae growth, while the effect of inorganic carbon was considered for each microorganism. The integrated model framework was assessed using experimental data from algal-bacterial consortia performing sidestream nitritation/denitritation. The validity of the model was further evaluated based on dataset from PSBR performing mainstream nitrification. The developed model could satisfactorily capture the dynamics of microbial populations and substrates under different operational conditions (i.e. feeding, carbon dosing and illuminating mode, light intensity, influent ammonium concentration), which might serve as a powerful tool for optimizing the novel algal-bacterial nitrogen removal processes.

Challenges in the application of microbial fuel cells to wastewater treatment and energy production: A mini review.

Wastewater is now considered to be a vital reusable source of water reuse and saving energy. However, current wastewater has multiple limitations such as high energy costs, large quantities of residuals being generated and lacking in potential resources. Recently, great attention has been paid to microbial fuel cells (MFCs) due to their mild operating conditions where a variety of biodegradable substrates can serve as fuel. MFCs can be used in wastewater treatment facilities to break down organic matter, and they have also been analysed for application as a biosensor such as a sensor for biological oxygen which demands monitoring. MFCs represent an innovation technology solution that is simple and rapid. Despite the advantages of this technology, there are still practical barriers to consider including low electricity production, current instability, high internal resistance and costly materials used. Thus, many problems must be overcome and doing this requires a more detailed analysis of energy production, consumption, and application. Currently, real-world applications of MFCs are limited due to their low power density level of only several thousand mW/m2. Efforts are being made to improve the performance and reduce the construction and operating costs of MFCs. This paper explores several aspects of MFCs such as anode, cathode and membrane, and in an effort to overcome the practical challenges of this system.

Optimization of process parameters for production of volatile fatty acid, biohydrogen and methane from anaerobic digestion.

The anaerobic digestion process has been primarily utilized for methane containing biogas production over the past few years. However, the digestion process could also be optimized for producing volatile fatty acids (VFAs) and biohydrogen. This is the first review article that combines the optimization approaches for all three possible products from the anaerobic digestion. In this review study, the types and configurations of the bioreactor are discussed for each type of product. This is followed by a review on optimization of common process parameters (e.g. temperature, pH, retention time and organic loading rate) separately for the production of VFA, biohydrogen and methane. This review also includes additional parameters, treatment methods or special additives that wield a significant and positive effect on production rate and these products' yield.

Biomass viability: An experimental study and the development of an empirical mathematical model for submerged membrane bioreactor.

This study investigates the influence of key biomass parameters on specific oxygen uptake rate (SOUR) in a sponge submerged membrane bioreactor (SSMBR) to develop mathematical models of biomass viability. Extra-cellular polymeric substances (EPS) were considered as a lumped parameter of bound EPS (bEPS) and soluble microbial products (SMP). Statistical analyses of experimental results indicate that the bEPS, SMP, mixed liquor suspended solids and volatile suspended solids (MLSS and MLVSS) have functional relationships with SOUR and their relative influence on SOUR was in the order of EPS>bEPS>SMP>MLVSS/MLSS. Based on correlations among biomass parameters and SOUR, two independent empirical models of biomass viability were developed. The models were validated using results of the SSMBR. However, further validation of the models for different operating conditions is suggested.

Competitive adsorption of metals on cabbage waste from multi-metal solutions.

This study assessed the adsorption capacity of the agro-waste 'cabbage' as a biosorbent in single, binary, ternary and quaternary sorption systems with Cu(II), Pb(II), Zn(II) and Cd(II) ions. Dried and ground powder of cabbage waste (CW) was used for the sorption of metals ions. Carboxylic, hydroxyl, and amine groups in cabbage waste were found to be the key functional groups for metal sorption. The adsorption isotherms obtained could be well fitted to both the mono- and multi-metal models. In the competitive adsorption systems, cabbage waste adsorbed larger amount of Pb(II) than the other three metals. However, the presence of the competing ions suppressed the sorption of the target metal ions. Except the case of binary system of Cd(II)-Zn(II) and Cd(II)-Cu(II), there was a linear inverse dependency between the sorption capacities and number of different types of competitive metal ions.

Enhanced biological phosphorus removal and its modeling for the activated sludge and membrane bioreactor processes.

A modified activated sludge process (ASP) for enhanced biological phosphorus removal (EBPR) needs to sustain stable performance for wastewater treatment to avoid eutrophication in the aquatic environment. Unfortunately, the overall efficiency of the EBPR in ASPs and membrane bioreactors (MBRs) is frequently hindered by different operational/system constraints. Moreover, although phosphorus removal data from several wastewater treatment systems are available, a comprehensive mathematical model of the process is still lacking. This paper presents a critical review that highlights the core issues of the biological phosphorus removal in ASPs and MBRs while discussing the inhibitory process requirements for other nutrients' removal. This mini review also successfully provided an assessment of the available models for predicting phosphorus removal in both ASP and MBR systems. The advantages and limitations of the existing models were discussed together with the inclusion of few guidelines for their improvement.

Enantiospecific fate of ibuprofen, ketoprofen and naproxen in a laboratory-scale membrane bioreactor.

The enantiospecific fate of three common pharmaceuticals was monitored in a laboratory-scale membrane bioreactor (MBR). The MBR was operated with a hydraulic retention time of 24 h and a mixed liquor suspended solids concentration of 8.6-10 g/L. Standard solutions of ibuprofen, ketoprofen and naproxen were dosed into the synthetic feed of the MBR. Influent and permeate samples were then collected for enantiospecific analysis. The individual (R)- and (S)-enantiomers of the three pharmaceuticals were derivatised using a chiral derivatizing agent to form pairs of diastereomers, which could then be separated and analysed by gas chromatography-tandem mass spectrometry (GC-MS/MS). Accurate quantitation of individual enantiomers was undertaken by an isotope dilution process. By comparing the total concentration (as the sum of the two enantiomers) in the MBR influent and permeate, ibuprofen, ketoprofen and naproxen concentrations were observed to have been reduced as much as 99%, 43% and 68%, respectively. Furthermore, evidence of enantioselective biodegradation was observed for all three pharmaceuticals. (S)-Ibuprofen was shown to be preferentially degraded compared to (R)-ibuprofen with an average decrease in enantiomeric fraction (EF) from 0.52 to 0.39. In contrast, (R)-ketoprofen was preferentially degraded compared to (S)-ketoprofen with a relatively minor increase in EF from 0.52 to 0.63. The use of a relatively pure enantiomeric solution of (S)-naproxen resulted in a significant change in EF from 0.99 to 0.65. However, this experiment consistently revealed significantly increased concentrations of (R)-naproxen during MBR treatment. It is hypothesised that the source of this (R)-naproxen was the enantiomeric inversion of (S)-naproxen. Such enantiomeric inversion of chiral pharmaceuticals during wastewater treatment processes has not previously been reported.

Preparation of titanium dioxide nanoparticles from electrocoagulated sludge using sacrificial titanium electrodes.

A comprehensive investigation of electrocoagulation using sacrificial titanium (Ti) electrodes in wastewater was carried out. The effects of specific process variables, such as initial pH, mixing, current density, initial organic loading, and ionic/electrolyte strength were first optimized to produce recyclable Ti-based sludge. The sludge was incinerated at 600 degrees C to produce functional TiO(2) photocatalyst. X-ray diffraction analysis revealed that TiO(2) produced at optimum electrocoagulation conditions was mostly anatase structure. The specific surface area of the synthesized TiO(2) photocatalyst was higher than that of the commercially available and widely used Degussa P-25 TiO(2). Furthermore, energy dispersive X-ray and X-ray photoelectron spectroscopy analyses showed that in additional to titanium and oxygen, this photocatalyst is also composed of carbon and phosphorus. These elements were mainly doped as a substitute site for the oxygen atom. Transmission electron microscopy images exhibited sharply edged nanorods, round nanoparticles, and nanotubes with nonuniform shapes showing some structural defects. Photodecomposition of gaseous acetaldehyde by this photocatalyst was also conducted under UV and visible light irradiation to study the photocatalytic properties of the doped TiO(2) photocatalyst. While no photocatalytic activity was observed under visible light irradiation, this doped TiO(2) photocatalyst exhibited high photocatalytic activity under UV light.

The role of endocrine disrupters in water recycling: risk or mania?

The widespread occurrence of endocrine disrupting chemicals (EDCs), such as steroid hormones, in secondary wastewater effluents has become a major concern in the water recycling practice. This paper investigates the risk of steroid hormone breakthrough during nanofiltration membrane filtration in water recycling applications. The results indicate a dynamic equilibrium between adsorption and desorption of steroid hormone with regard to the membrane. This equilibrium can be pH dependent and there is a possibility for release of steroid hormones at high pH during membrane cleaning procedures or erratic pH variations. Increase in water recovery can severely increase the hormone breakthrough concentration. The results also indicate a possibility of accumulation of steroid hormones in the NF membrane, followed by subsequent release.

Removal of the natural hormone estrone from aqueous solutions using nanofiltration and reverse osmosis.

The ability of a variety of nanofiltration and reverse osmosis membranes to retain the natural hormone estrone are examined here as a function of solution conditions. While size exclusion dominates retention with the tighter membranes, both size exclusion and adsorptive effects appear to be instrumental in maintaining high retention on nanofiltration membranes that otherwise exhibit relatively low ion retentions. These adsorptive effects may be driven by hydrogen bonding between estrone and the membrane. Electrostatic attraction appears to aid retention with an apparent slight decrease in retention at high NaCl concentrations. Deprotonation of estrone leads to a significant decrease in retention, most likely as a result of the effect of strong electrostatic repulsive forces decreasing the proximity of the negatively charged estrone to the negatively charged membrane surface and thus lowering the potential for adsorptive retention. This deprotonation effect is absent for tight RO membranes. The results reported here indicate that while open nanofiltration membranes may be effective in retaining estrone under some conditions, the extent of retention may be very susceptible to maintenance of adsorptive capacity at the membrane surface and depend on solution chemistry.

Dsorption of estrone on nanofiltration and reverse osmosis membranes in water and wastewater treatment.

Adsorption of the trace contaminant estrone, a natural hormone and commonly abundant in surface waters and in treated as well as untreated wastewaters, to eight commercial nanofiltration and reverse osmosis membranes was investigated under well defined conditions. Experiments were conducted in stainless steel stirred cells by spiking trace levels (100 ng x L(-1)) of estrone into five different matrices, namely MilliQ water, a bicarbonate solution, synthetic natural waters containing natural organics, and secondary effluent. Results show that estrone is adsorbed to the membranes to varying degrees with extent of adsorption influenced by the feedwater composition with different mechanisms of association controlling adsorption to different membrane types. Increase in membrane resistance is typically observed to result in decrease in extent of estrone adsorption.