Development and Characterization of Quercetin-Loaded Polymeric Liposomes with Gelatin-Poly(ethylene glycol)-Folic Acid Coating to Increase Their Long-Circulating and Anticancer Activity.

Liposomes as drug-delivery systems have been researched and applied in multiple scientific reports and introduced as patented products with interesting therapeutic properties. Despite various advantages, this drug carrier faces major difficulties in its innate stability, cancer cell specificity, and control over the release of hydrophobic drugs, particularly quercetin, a naturally derived drug that carries many desirable characteristics for anticancer treatment. To improve the effectiveness of liposomes to deliver quercetin by tackling and mitigating the mentioned hurdles, we developed a strategy to establish the ability to passively target cancerous cells, as well as to increase the bioavailability of loaded drugs by incorporating poly(ethylene glycol), gelatin, and folic acid moieties to modify the liposomal system's surface. This research developed a chemically synthesized gelatin, poly(ethylene glycol), and folic acid as a single polymer to coat drug-loaded liposome systems. Liposomes were coated with gelatin-poly(ethylene glycol)-folic acid by electrostatic interaction, characterized by their size, morphology, ζ potential, drug loading efficiency, infrared structures, differential scanning calorimetry spectra, and drug-releasing profiles, and then evaluated for their cytotoxicity to MCF-7 breast cancer cells, as well as cellular uptake, analyzed by confocal imaging to further elaborate on the in vitro behavior of the coated liposome. The results indicated an unusual change in size with increased coating materials, followed by increased colloidal stability, ζ potential, and improved cytotoxicity to cancer cells, as shown by the cellular viability test with MCF-7. Cellular uptake also confirmed these results, providing data for the effects of biopolymer coating, while confirming that folic acid can increase the uptake of liposome by cancer cells. In consideration of such results, the modified gelatin-poly(ethylene glycol)-folic acid-coated liposome can be a potential system in delivering the assigned anticancer compound. This modified biopolymer showed excellent properties as a coating material and should be considered for further practical applications in the future.

Synthesis of magnetic MFe2O4 (M = Ni, Co, Zn, Fe) supported on porous carbons derived from Bidens pilosa weed and their adsorptive comparison of toxic dyes.

Bidens pilosa is classified as an invasive plant and has become a problematic weed to many agricultural crops. This species strongly germinates, grows and reproduces and competing for nutrients with local plants. To lessen the influence of Bidens pilosa, therefore, converting this harmful species into carbon materials as adsorbents in harm-to-wealth and valorization strategies is required. Here, we synthesized a series of magnetic composites based on MFe2O4 (M = Ni, Co, Zn, Fe) supported on porous carbon (MFOAC) derived from Bidens pilosa by a facile hydrothermal method. The Bidens pilosa carbon was initially activated by condensed H3PO4 to increase the surface chemistry. We observed that porous carbon loaded NiFe2O4 (NFOAC) reached the highest surface area (795.7 m2 g-1), followed by CoFe2O4/AC (449.1 m2 g-1), Fe3O4/AC (426.1 m2 g-1), ZnFe2O4/AC (409.5 m2 g-1). Morphological results showed nanoparticles were well-dispersed on the surface of carbon. RhB, MO, and MR dyes were used as adsorbate to test the adsorption by MFOAC. Effect of time (0-360 min), concentration (5-50 mg L-1), dosage (0.05-0.2 g L-1), and pH (3-9) on dyes adsorption onto MFOAC was investigated. It was found that NFOAC obtained the highest maximum adsorption capacity against dyes, RhB (107.96 mg g-1) < MO (148.05 mg g-1) < MR (153.1 mg g-1). Several mechanisms such as H bonding, π-π stacking, cation-π interaction, and electrostatic interaction were suggested. With sufficient stability and capacity, NFOAC can be used as potential adsorbent for real water treatment systems.

Correction: Nguyen et al. Green Silver Nanoparticles Formed by Phyllanthus urinaria, Pouzolzia zeylanica, and Scoparia dulcis Leaf Extracts and the Antifungal Activity. Nanomaterials 2020, 10, 542.

In the original publication [...].

Optimization of hydrothermal synthesis conditions of Bidens pilosa-derived NiFe2O4@AC for dye adsorption using response surface methodology and Box-Behnken design.

The presence of stable and hazardous organic dyes in industrial effluents poses significant risks to both public health and the environment. Activated carbons and biochars are widely used adsorbents for removal of these pollutants, but they often have several disadvantages such as poor recoverability and inseparability from water in the post-adsorption process. Incorporating a magnetic component into activated carbons can address these drawbacks. This study aims to optimizing the production of NiFe2O4-loaded activated carbon (NiFe2O4@AC) derived from a Bidens pilosa biomass source through a hydrothermal method for the adsorption of Rhodamine B (RhB), methyl orange (MO), and methyl red (MR) dyes. Response surface methodology (RSM) and Box-Behnken design (BBD) were applied to analyze the key synthesis factors such as NiFe2O4 loading percentage (10-50%), hydrothermal temperature (120-180 °C), and reaction time (6-18 h). The optimized condition was found at a NiFe2O4 loading of 19.93%, a temperature of 135.55 °C, and a reaction time of 16.54 h. The optimum NiFe2O4@AC demonstrated excellent sorption efficiencies of higher than 92.98-97.10% against all three dyes. This adsorbent was characterized, exhibiting a well-developed porous structure with a high surface area of 973.5 m2 g-1. Kinetic and isotherm were studied with the best fit of pseudo-second-order, and Freundlich or Temkin. Qmax values were determined to be 204.07, 266.16, and 177.70 mg g-1 for RhB, MO, and MR, respectively. By selecting HCl as an elution, NiFe2O4@AC could be efficiently reused for at least 4 cycles. Thus, the Bidens pilosa-derived NiFe2O4@AC can be a promising material for effective and recyclable removal of dye pollutants from wastewater.

Differentiable optimization layers enhance GNN-based mitosis detection.

Automatic mitosis detection from video is an essential step in analyzing proliferative behaviour of cells. In existing studies, a conventional object detector such as Unet is combined with a link prediction algorithm to find correspondences between parent and daughter cells. However, they do not take into account the biological constraint that a cell in a frame can correspond to up to two cells in the next frame. Our model called GNN-DOL enables mitosis detection by complementing a graph neural network (GNN) with a differentiable optimization layer (DOL) that implements the constraint. In time-lapse microscopy sequences cultured under four different conditions, we observed that the layer substantially improved detection performance in comparison with GNN-based link prediction. Our results illustrate the importance of incorporating biological knowledge explicitly into deep learning models.

New frontiers of invasive plants for biosynthesis of nanoparticles towards biomedical applications: A review.

Above 1000 invasive species have been growing and developing ubiquitously on Earth. With extremely vigorous adaptability, strong reproduction, and spreading powers, invasive species have posed an alarming threat to indigenous plants, water quality, soil, as well as biodiversity. It was estimated that an economic loss of billions of dollars or equivalent to 1 % of gross domestic product as a consequence of lost crops, control efforts, and damage costs caused by invasive plants in the United States. While eradicating invasive plants from the ecosystems is practically infeasible, taking advantage of invasive plants as a sustainable, locally available, and zero-cost source to provide valuable phytochemicals for bionanoparticles fabrication is worth considering. Here, we review the harms, benefits, and role of invasive species as important botanical sources to extract natural compounds such as piceatannol, resveratrol, and quadrangularin-A, flavonoids, and triterpenoids, which are linked tightly to the formation and application of bionanoparticles. As expected, the invasive plant-mediated bionanoparticles have exhibited outstanding antibacterial, antifungal, anticancer, and antioxidant activities. The mechanism of biomedical activities of the invasive plant-mediated bionanoparticles was insightfully addressed and discussed. We also expect that this review not only contributes to efforts to combat invasive plant species but also opens new frontiers of bionanoparticles in the biomedical applications, therapeutic treatment, and smart agriculture.

Green synthesis of ZnFe2O4@ZnO nanocomposites using Chrysanthemum spp. floral waste for photocatalytic dye degradation.

The occurrence of textile dyeing wastewater discharged into the environment has been recently increasing, resulting in harmful effects on living organisms and human health. The use of green nanoparticles for water decontamination has received much attention. Floral waste can be extracted with the release of natural compounds, which act as reducing and stabilizing agents during the biosynthesis of nanoparticles. Herein, we report the utilization of Chrysanthemum spp. floral waste extract to synthesize green ZnFe2O4@ZnO (ZFOZx) nanocomposites for the photocatalytic degradation of Congo red under solar light irradiation. The various molar ratio of ZnFe2O4 (0-50%) was incorporated into ZnO nanoparticles. The surface area of green ZFOZx nanocomposites was found to increase (7.41-42.66 m2 g-1) while their band gap energy decreased from 1.98 eV to 1.92 eV. Moreover, the results exhibited the highest Congo red dye degradation efficiency of 94.85% at a concentration of 5.0 mg L-1, and a catalyst dosage of 0.33 g L-1. The •O2- reactive species played a vital role in the photocatalytic degradation of Congo red dye. Green ZFOZ3 nanocomposites had good recyclability with at least three cycles, and an excellent stability. The germination results showed that wastewater treated by ZFOZ3 was safe enough for bean seed germination. We expect that this work contributes significantly to developing novel green bio-based nanomaterials for environmental remediation as well as reducing the harm caused by flower wastes.

A critical review on pineapple (Ananas comosus) wastes for water treatment, challenges and future prospects towards circular economy.

Each year, nearly 30 million tons of pineapple fruit are harvested for food and drinking industries, along with the release of a huge amount of pineapple wastes. Without the proper treatment, pineapple wastes can cause adverse impacts on the environment, calling for new technologies to convert them into valuable products. Here, we review the production and application of adsorbents derived from pineapple wastes. The thermal processing or chemical modification improved the surface chemistry and porosity of these adsorbents. The specific surface areas of the pineapple wastes-based adsorbents were in range from 4.2 to at 522.9 m2·g-1. Almost adsorption systems followed the pseudo second order kinetic model, and Langmuir isotherm model. The adsorption mechanism was found with the major role of electrostatic attraction, complexation, chelation, and ion exchange. The pineapple wastes based adsorbents could be easily regenerated. We suggest the potential of the pineapple wastes towards circular economy.

Polymerization-Driven Self-Wrinkling on a Frozen Hydrogel Surface toward Ultra-Stretchable Polypyrrole-Based Supercapacitors.

The construction of ultra-stretchable and smart supercapacitors with a large deformation-tolerance range and highly efficient self-healability is fully desired for next-generation wearable electronics. Herein, a sandwich-structured self-wrinkling hydrogel film (SSHF) is fabricated by freezing-constrained polymerization-driven self-wrinkling. Polypyrrole layers are first polymerized on a frozen pre-stretching hydrogel surface and subsequently self-wrinkled upon releasing the pre-strain. The SSHF with two polypyrrole electrode layers sandwiched with a hydrogel electrolytic layer is finally achieved by cutting four edges, and the all-in-one integrated structure creatively avoids the delamination between the electrodes and the electrolyte. The as-obtained SSHF can be directly used as an integrated all-in-one supercapacitor demonstrating high specific capacitance (79.5 F g-1 at 0.5 A g-1), large stretchability (>500%), and reliable room temperature self-healability. The freezing-constrained polymerization-driven self-wrinkling strategy might provide a unique self-wrinkling procedure to fabricate self-healable conducting polymer-based hydrogels for ultra-stretchable smart supercapacitors.

Facile synthesis of CoFe2O4@MIL-53(Al) nanocomposite for fast dye removal: Adsorption models, optimization and recyclability.

The global occurrence of textile dyes pollution has recently emerged, posing a serious threat to ecological systems. To abate dye contamination, we here developed a novel magnetic porous CoFe2O4@MIL-53(Al) nanocomposite by incorporating magnetic CoFe2O4 nanoparticles with MIL-53(Al) metal-organic framework. This nanocomposite possessed a surface area of 197.144 m2 g-1 and a pore volume of 0.413 cm3 g-1. The effect of contact time (5-120 min), concentration (5-50 mg L-1), dosage (0.1-1.0 g L-1), and pH (2-10) on Congo red adsorption was clarified. CoFe2O4@MIL-53(Al) could remove 95.85% of Cong red dye from water with an accelerated kinetic rate of 0.6544 min-1 within 10 min. The kinetic and isotherm models showed the predominance of Bangham and Temkin. According to Langmuir, the maximum uptake capacities of CoFe2O4@MIL-53(Al), CoFe2O4, and MIL-53(Al) adsorbents were 43.768, 17.982, and 15.295 mg g-1, respectively. CoFe2O4@MIL-53(Al) was selected to optimize Cong red treatment using Box-Behnken experimental design. The outcomes showed that CoFe2O4@MIL-53(Al) achieved the highest experimental uptake capacity of 35.919 mg g-1 at concentration (29.966 mg L-1), time (14.926 min), and dosage (0.486 g L-1). CoFe2O4@MIL-53(Al) could treat dye mixture (methylene blue, methyl orange, Congo red, malachite green, and crystal violet) with an outstanding removal efficiency of 81.24% for 30 min, and could be reused up to five cycles. Therefore, novel recyclable and stable CoFe2O4@MIL-53(Al) is recommended to integrate well with real dye treatments systems.

Strong-Weak Response Network-Enabled Ionic Conductive Hydrogels with High Stretchability, Self-Healability, and Self-Adhesion for Ionic Sensors.

The requirement of ionic conductive hydrogels with tailor-made superelasticity and high chain mobility is highly desired while meeting a challenge. Herein, ionic conductive hydrogels with the design of strong-weak response networks were synthesized via the free-radical copolymerization of monomers of 1-methyl-3-(4-vinylbenzyl)imidazolium chloride and sodium 2-acrylamino-2-methylpropanesulfonate in water. The as-formed strong-weak response networks in ionic conductive hydrogels included binary interactions of strong electrostatic forces and weak hydrogen bonds. The electrostatic forces imparted excellent mechanical elasticity, and the hydrogen-bonded interactions served as highly active and reversible networks to dissipate fracture energy during the deformation. Importantly, the resultant ionic conductive hydrogels exhibited high toughness of ∼2205 kJ m-3, satisfying fatigue resistance, and excellent healing efficiency of >90%. Moreover, the tailoring of counterion concentrations in hydrogels by adding various concentrations of inorganic salts could regulate the electrostatic forces within hydrogels as well as the finally mechanical strengths. Ascribing to the combination of large stretchability and large chain mobility, the resultant ionic conductive hydrogels could directly act as a stretchable ionic conductor for the assembly of self-healable and self-adhesive capacitance-type ionic sensors which are capable of detecting large and tiny human activities. This study could offer a promising strategy for the design and manufacturing of emerging ionic conductors with high mechanical elasticity and large segment mobility.

Generating reaction trees with cascaded variational autoencoders.

To develop useful drugs and materials, chemists synthesize diverse molecules by trying various reactants and reaction routes. Toward automating this process, we propose a deep generative model, called cascaded variational autoencoder (casVAE), for synthesizable molecular design. It generates a reaction tree, where the reactants are chosen from commercially available compounds and the synthesis route is constructed as a tree of reaction templates. The first part of casVAE is designed to generate a molecule called a surrogate product, while the second part constructs a reaction tree that synthesizes it. In benchmarking, casVAE showed its ability to generate reaction trees that yield high-quality and synthesizable molecules. An implementation of casVAE is publicly available at https://github.com/tsudalab/rxngenerator.

Cryopolymerization-enabled self-wrinkled polyaniline-based hydrogels for highly stretchable all-in-one supercapacitors.

Conductive polymer hydrogels are attractive due to their combination of high theoretical capacitance, intrinsic electrical conductivity, fast ion transport, and high flexibility for supercapacitor electrodes. However, it is challenging to integrate conductive polymer hydrogels into an all-in-one supercapacitor (A-SC) simultaneously with large stretchability and superior energy density. Here, a self-wrinkled polyaniline (PANI)-based composite hydrogel (SPCH) with an electrolytic hydrogel and a PANI composite hydrogel as the core and sheath, respectively, was prepared through a stretching/cryopolymerization/releasing strategy. The self-wrinkled PANI-based hydrogel exhibited large stretchability (∼970%) and high fatigue resistance (∼100% retention of tensile strength after 1200 cycles at a 200% strain) ascribing to the formation of the self-wrinkled surfaces and the intrinsic stretchability of hydrogels. Upon cutting off the edge connections, the SPCH could directly work as an intrinsically stretchable A-SC maintaining high energy density (70 µW h cm-2) and stable electrochemical outputs under a stretchability of 500% strain and a full-scale bending of 180°. After 1000 cycles of 100% strain stretching and releasing processes, the A-SC device could deliver highly stable outputs with high capacitance retention of 92%. This study might provide a straightforward method for fabricating self-wrinkled conductive polymer-based hydrogels for A-SCs with highly deformation-tolerant energy storage.

Investigations on the interactions of proteins with nanocellulose produced via sulphuric acid hydrolysis.

The investigation of protein-nanoparticle interactions contributes to the understanding of nanoparticle bio-reactivity and creates a database of nanoparticles for use in nanomedicine, nanodiagnosis, and nanotherapy. In this study, hen's egg white was used as the protein source to study the interaction of proteins with sulphuric acid hydrolysed nanocellulose (CNC). Several techniques such as FTIR, zeta potential measurement, UV-vis spectroscopy, compressive strength, TGA, contact angle and FESEM provide valuable information in the protein-CNC interaction study. The presence of a broader peak in the 1600-1050 cm-1 range of CNC/egg white protein FTIR spectrum compared to the 1600-1050 cm-1 range of CNC sample indicated the binding of egg white protein to CNC surface. The contact angle with the glass surface decreased with the addition of CNC to egg white protein. The FESEM EDX spectra showed a higher amount of N and Na on the surface of CNC. It indicates the density of protein molecules higher around CNC. The zeta potential of CNC changed from -26.7 ± 0.46 to -21.7 ± 0.2 with the introduction of egg white protein due to the hydrogen bonding, polar bonds and electrostatic interaction between surface CNC and protein. The compressive strength of the egg white protein films increased from 0.064 ± 0.01 to 0.36 ± 0.02 MPa with increasing the CNC concentration from 0 to 4.73% (w/v). The thermal decomposition temperature of CNC/egg white protein decreased compared to egg white protein thermal decomposition temperature. According to UV-Vis spectroscopy, the far-UV light (207-222nm) absorption peak slightly changed in the CNC/egg white protein spectrum compared to the egg white protein spectrum. Based on the results, the observations of protein nanoparticle interactions provide an additional understanding, besides the theoretical simulations from previous studies. Also, the results indicate to aim CNC for the application of nanomedicine and nanotherapy. A new insight given by us in this research assumes a reasonable solution to these crucial applications.

Optimal Extraction Process and In Vivo Anti-Inflammatory Evaluation of High Purity Oily Capsicum Oleoresin for Pharmaceutical Applications.

Recently, plant-derived anti-inflammatory products have received an increasing attention from researchers due to their excellent in vivo activity with limited side effects. Therefore, the extraction of natural active compounds from the plant with high purity for use in anti-inflammatory formulations is required. In this study, oily Capsicum oleoresin (OCO) was extracted from Capsicum frutescens L. in ethanol by the ultrasound-assisted extraction technique, followed by a centrifugation step for a high purity OCO extract, which can be applied to develop anti-inflammatory formulations. The impact of various conditions (ethanol concentration, sonicating temperature, extraction time, solvent-to-sample ratio, and extraction repetition) on the efficiency of the extraction process was investigated. The results showed that the optimized conditions for the high yield of OCO were 95% ethanol, 50-60°C, 60 minutes, solvent-to-sample ratio of 5 : 1 ml/g, and one extraction repetition, followed by centrifuging at 5000 rpm in 2 hours. Then, the purity and in vivo anti-inflammatory activities of the obtained OCO was then determined by using the HPLC method and carrageenan-induced mice paw edema model, respectively. The purity of OCO was determined as 3.408 mg capsaicin per gram of Capsicum powder; meanwhile, its anti-inflammatory effect value was approximate to that of the commercial drug diclofenac after 48 hours of treatment. The high purity OCO prepared by this low-cost and ecofriendly extraction process would be a promising material for anti-inflammatory formulations.

Lipid-Based Nanoparticles in the Clinic and Clinical Trials: From Cancer Nanomedicine to COVID-19 Vaccines.

COVID-19 vaccines have been developed with unprecedented speed which would not have been possible without decades of fundamental research on delivery nanotechnology. Lipid-based nanoparticles have played a pivotal role in the successes of COVID-19 vaccines and many other nanomedicines, such as Doxil® and Onpattro®, and have therefore been considered as the frontrunner in nanoscale drug delivery systems. In this review, we aim to highlight the progress in the development of these lipid nanoparticles for various applications, ranging from cancer nanomedicines to COVID-19 vaccines. The lipid-based nanoparticles discussed in this review are liposomes, niosomes, transfersomes, solid lipid nanoparticles, and nanostructured lipid carriers. We particularly focus on the innovations that have obtained regulatory approval or that are in clinical trials. We also discuss the physicochemical properties required for specific applications, highlight the differences in requirements for the delivery of different cargos, and introduce current challenges that need further development. This review serves as a useful guideline for designing new lipid nanoparticles for both preventative and therapeutic vaccines including immunotherapies.

Retrovirus Drugs-Loaded PEGylated PAMAM for Prolonging Drug Release and Enhancing Efficiency in HIV Treatment.

Polyamidoamine dendrimer (PAMAM) with its unique characteristics emerges as a potential drug delivery system which can prolong releasing time, reduce the side effects but still retaining treatment efficiency. In this study, methoxy polyethylene glycol modified PAMAM generation 3.0 (G3.0@mPEG) is prepared and characterized via 1H-NMR, FT-IR, and TEM. Subsequently, two antiretroviral agents (ARV) including lamivudine (3TC) and zidovudine (AZT) are individually encapsulated into G3.0@mPEG. The drug-loading efficiency, drug release profile, cytotoxicity and anti-HIV activity are then evaluated. The results illustrate that G3.0@mPEG particles are spherical with a size of 34.5 ± 0.2 nm and a drug loading content of about 9%. Both G3.0@mPEG and ARV@G3.0@mPEG show no cytotoxicity on BJ cells, and G3.0@mPEG loading 3TC and AZT performs sustained drug release behavior which is best fitted with the Korsmeyer-Peppas model. Finally, the anti-HIV activity of ARV via Enzymatic Assay of Pepsin is retained after being loaded into the G3.0@mPEG, in which about 36% of pepsin activity was inhibited by AZT at the concentration of 0.226 mM. Overall, PAMAM G3.0@mPEG is a promising nanocarrier system for loading ARV in HIV treatment and prevention.

Cellulose supported promising magnetic sorbents for magnetic solid-phase extraction: A review.

Cellulose with ample hydroxyl groups is considered as a promising supportive biopolymer for fabricating cellulose supported promising magnetic sorbents (CMS) for magnetic solid-phase extraction (MSPE). The easy recovery via external magnetic field, and recyclability of CMS, associated with different types and surface modifications of cellulose has made them a promising sorbent in the field of solid-phase extraction. CMS based sorbent can offer improved adsorption and absorption capabilities due to its high specific surface area, porous structure, and magnetic attraction feature. This review mainly focuses on the fabrication strategies of CMS using magnetic nanoparticles (MNPs) and various forms of cellulose as a heterogeneous and homogeneous solution either in alkaline mediated urea or Ionic liquids (ILs). Moreover, CMS will be elaborated based on their structures, synthesis, physical performance, and chemical attraction of MNPs and their MSPE in details. The advantages, challenges, and prospects of CMS in future applications are also presented.

Comparison of biogenic silver nanoparticles formed by Momordica charantia and Psidium guajava leaf extract and antifungal evaluation.

Exploiting plant extracts to form metallic nanoparticles has been becoming the promising alternative routes of chemical and physical methods owing to environmentally friendly and abundantly renewable resources. In this study, Momordica charantia and Psidium guajava leaf extract (MC.broth and PG.broth) are exploited to fabricate two kinds of biogenic silver nanoparticles (MC.AgNPs and PG.AgNPs). Phytoconstituent screening is performed to identify the categories of natural compounds in MC.broth and PG.broth. Both extracts contain wealthy polyphenols which play a role of reducing agent to turn silver (I) ions into silver nuclei. Trace alkaloids, rich saponins and other oxygen-containing compounds creating the organic corona surrounding nanoparticles act as stabilizing agents. MC.AgNPs and PG.AgNPs are characterized by UV-vis and FTIR spectrophotometry, EDS and TEM techniques. FTIR spectra indicate the presence of O-H, C = O, C-O-C and C = C groups on the surface of silver nanoparticles which is corresponded with three elements of C, O and Ag found in EDS analysis. TEM micrographs show the spherical morphology of MC.AgNPs and PG.AgNPs. MC.AgNPs were 17.0 nm distributed in narrow range of 5-29 nm, while the average size of PG.AgNPs were 25.7 nm in the range of 5-53 nm. Further, MC.AgNPs and PG.AgNPs exhibit their effectively inhibitory ability against A. niger, A. flavus and F. oxysporum as dose-dependence. Altogether, MC.AgNPs and PG.AgNPs will have much potential in scaled up production and become the promising fungicides for agricultural applications.