The biological and therapeutic assessment of a P(3HB-co-4HB)-bioactive glass-graphene composite biomaterial for tissue regeneration.

An ideal wound dressing should create a healing environment that relieves pain, protects against infections, maintains moisture, removes debris, and speeds up wound closure and repair. However, conventional options like gauze often fall short in fulfilling these requirements, especially for chronic or nonhealing wounds. Hence there is a critical need for inventive formulations that offer efficient, cost-effective, and eco-friendly alternatives. This study focuses on assessing the innovative formulation based on a microbial-derived copolymer known as poly(3-hydroxybutyrate-co-4-hydroxybutyrate), P(3HB-co-4HB) bioactive glass and graphene particles, and exploring their biological response in vitro and in vivo-to find the best combination that promotes cell adhesion and enhances wound healing. The formulation optimized at concentration of bioactive glass (1 w/w%) and graphene (0.01 w/w%) showed accelerated degradation and enhanced blood vessel formation. Meanwhile biocompatibility was evaluated using murine osteoblasts, human dermal fibroblasts, and standard cell culture assays, demonstrating no adverse effects after 7 days of culture and well-regulated inflammatory kinetics. Whole thickness skin defect using mice indicated the feasibility of the biocomposites for a faster wound closure and reduced inflammation. Overall, this biocomposite appears promising as an ideal wound dressing material and positively influencing wound healing rates.

Bidirectional Neuronal Actuation by Uncaging with Violet and Green Light.

We have developed a photochemical protecting group that enables wavelength selective uncaging using green versus violet light. Change of the exocyclic oxygen of the laser dye coumarin-102 to sulfur, gave thio-coumarin-102, a new chromophore with an absorption ratio at 503/402 nm of 37. Photolysis of thio-coumarin-102 caged γ-aminobutyric acid was found to be highly wavelength selective on neurons, with normalized electrical responses >100-fold higher in the green versus violet channel. When partnered with coumarin-102 caged glutamate, we could use whole cell violet and green irradiation to fire and block neuronal action potentials with complete orthogonality. Localized irradiation of different dendritic segments, each connected to a neuronal cell body, in concert with 3-dimenional Ca2+ imaging, revealed that such inputs could function independently. Chemical signaling in living cells always involves a complex balance of multiple pathways, use of (thio)-coumarin-102 caged compounds will enable arbitrarily timed flashes of green and violet light to interrogate two independent pathways simultaneously.

The Development and Characterisation of a P(3HB-co-4HB)-Bioactive Glass-Graphene Hydrogel as a Potential Formulation for Biomedical and Therapeutical Translation.

The clinical management of wounds is known to be a significant challenge: not only does the dressing need to ensure and provide the appropriate barrier and healing characteristics, but consideration of patient compliance concerning comfort, functionality, and practicality also needs to be included. The poly(3-hydroxybutyrate-co-4-hydroxubutyrate) (P(3HB-co-4HB)) copolymer, isolated from Cupriavidus malaysiensis USM1020 (C. malaysiensis USM1020), was produced in the presence of excess carbon sources (1,4-butanediol and 1,6-hexanediol) using either a shake flask cultivation process or a bioreactor fermentation system. P(3HB-co-4HB) is widely known to be biodegradable and highly biocompatible and contains a tuneable 4HB monomer molar fraction, which is known to affect the final physicochemical properties of the intracellular copolymer. In this paper, we describe not only the fabrication of the polymeric gel but also its optimised profiling using a range of physical and mechanical techniques, i.e., SEM, FTIR, DMA, DSC, and WCA. The further enhancement of the gel through additional functionalisation with sol-gel-derived bioactive glass and liquid-exfoliated graphene was also investigated. The biocompatibility and biological characterisation of the substrates was assessed using murine osteoblasts (MC3T3), human primary dermal fibroblasts (HDFs), human fibroblast (BJ) cells, and standard cell culture assays (i.e., metabolic activity, LDH release, and live/dead staining). In short, P(3HB-co-4HB) was successfully isolated from the bacteria, with the defined physico-chemical profiles dependent on the culture substrate and culturing platform used. The additional enhancement of the copolymer with bioactive glass and/or graphene was also demonstrated by varying the combination loading of the materials, i.e., graphene resulted in an increase in tensile strength (~11 MPa) and the wettability increased following the incorporation of bioactive glass and 0.01 wt% graphene (WCA ~46.3°). No detrimental effects in terms of biocompatibility were noticed during the 7 days of culture in the primary and established cell lines. This study demonstrates the importance of optimising each of the individual components within the biocomposite and their relationship concerning the fine-tuning of the material's properties, thus targeting and impacting the endpoint application.

A Machine Learning Approach for PLGA Nanoparticles in Antiviral Drug Delivery.

In recent years, nanoparticles have been highly investigated in the laboratory. However, only a few laboratory discoveries have been translated into clinical practice. These findings in the laboratory are limited by trial-and-error methods to determine the optimum formulation for successful drug delivery. A new paradigm is required to ease the translation of lab discoveries to clinical practice. Due to their previous success in antiviral activity, it is vital to accelerate the discovery of novel drugs to treat and manage viruses. Machine learning is a subfield of artificial intelligence and consists of computer algorithms which are improved through experience. It can generate predictions from data inputs via an algorithm which includes a method built from inputs and outputs. Combining nanotherapeutics and well-established machine-learning algorithms can simplify antiviral-drug development systems by automating the analysis. Other relationships in bio-pharmaceutical networks would eventually aid in reaching a complex goal very easily. From previous laboratory experiments, data can be extracted and input into machine learning algorithms to generate predictions. In this study, poly (lactic-co-glycolic acid) (PLGA) nanoparticles were investigated in antiviral drug delivery. Data was extracted from research articles on nanoparticle size, polydispersity index, drug loading capacity and encapsulation efficiency. The Gaussian Process, a form of machine learning algorithm, could be applied to this data to generate graphs with predictions of the datasets. The Gaussian Process is a probabilistic machine learning model which defines a prior over function. The mean and variance of the data can be calculated via matrix multiplications, leading to the formation of prediction graphs-the graphs generated in this study which could be used for the discovery of novel antiviral drugs. The drug load and encapsulation efficiency of a nanoparticle with a specific size can be predicted using these graphs. This could eliminate the trial-and-error discovery method and save laboratory time and ease efficiency.

Therapeutic Application of an Ag-Nanoparticle-PNIPAAm-Modified Eggshell Membrane Construct for Dermal Regeneration and Reconstruction.

Current therapeutic treatments for the repair and/or replacement of damaged skin following disease or traumatic injury is severely limited. The chicken eggshell membrane (ESM) is a unique material: its innate physical and mechanical characteristics offer optimal barrier properties and, as a naturally derived extract, it demonstrates inherent biocompatibility/biodegradability. To further enhance its therapeutic and clinical potential, the ESM can be modified with the thermo-responsive polymer, poly(N-isopropylacrylAmide) (PNIPAAm) as well as the incorporation of (drug-loaded) silver nanoparticles (AgNP); essentially, by a simple change in temperature, the release and delivery of the NP can be targeted and controlled. In this study, ESM samples were isolated using a decellularization protocol, and the physical and mechanical characteristics were profiled using SEM, FT-IR, DSC and DMA. PNIPAAm was successfully grafted to the ESM via amidation reactions and confirmed using FT-IR, which demonstrated the distinctive peaks associated with Amide A (3275 cm−1), Amide B (2970 cm−1), Amide I (1630 cm−1), Amide II (1535 cm−1), CH2, CH3 groups, and Amide III (1250 cm−1) peaks. Confirmation of the incorporation of AgNP onto the stratified membrane was confirmed visually with SEM, qualitatively using FT-IR and also via changes in absorbance at 380 nm using UV-Vis spectrophotometry during a controlled release study for 72 h. The biocompatibility and cytotoxicity of the novel constructs were assessed using human dermal fibroblast (HDFa) and mouse dermal fibroblast (L929) cells and standard cell culture assays. Metabolic activity assessment (i.e., MTS assay), LDH-release profiles and Live/Dead staining demonstrated good attachment and spreading to the samples, and high cell viability following 3 days of culture. Interestingly, longer-term viability (>5 days), the ESM-PNIPAAm and ESM-PNIPAAm (AgNP) samples showed a greater and sustained cell viability profile. In summary, the modified and enhanced ESM constructs were successfully prepared and characterized in terms of their physical and mechanical profiles. AgNP were successfully loaded into the construct and demonstrated a desirable release profile dependent on temperature modulation. Fibroblasts cultured on the extracted ESM samples and ESM-PNIPAAm demonstrated high biocompatibility in terms of high cell attachment, spreading, viability and proliferation rates. As such, this work summarizes the development of an enhanced ESM-based construct which may be exploited as a clinical/therapeutic wound dressing as well as a possible application as a novel biomaterial scaffold for drug development.

Validation and scalability of homemade polycaprolactone macrobeads grafted with thermo-responsive poly(N-isopropylacrylamide) for mesenchymal stem cell expansion and harvesting.

In this study, polycaprolactone (PCL) macrobeads were prepared by an oil-in-water (o/w) emulsion solvent evaporation method with poly(vinyl alcohol) (PVA) as an emulsifier and conjugated to poly(N-isopropylacrylamide) (PNIPAAm) to be used as cell carriers with noninvasive cell detachment properties (thermo-response). Following previous studies with PCL-PNIPAAm carriers, our objectives were to confirm the successful conjugation on homemade macrobeads and to show the advantages of homemade production over commercial beads to control morphological, biological, and fluidization properties. The effects of PCL concentration on the droplet formation and of flow rate and PVA concentration on the size of the beads were demonstrated. The size of the beads, all spherical, ranged from 0.5 to 3.7 mm with four bead categories based on production parameters. The morphology and size of the beads were observed by scanning electron microscopy to show surface roughness enhancing cell attachment and proliferation compared to commercial beads. The functionalization steps with PNIPAAm were then characterized and confirmed by Fourier transform infrared spectroscopy, scanning electron microscopy, and energy dispersion spectroscopy. PNIPAAm-grafted macrobeads allowed mesenchymal stem cells (MSCs) to spread and grow for up to 21 days. By reducing the temperature to 25°C, the MSCs were successfully detached from the PCL-PNIPAAm beads as observed with fluorescence microscopy. Furthermore, we validated the scalability potential of both macrobeads production and conjugation with PCL, to produce easily kilograms of thermo-responsive macrocarriers in a lab environment. This could help moving such approaches towards clinically and industrially relevant processes were cell expansion is needed at very large scale.

Highly Stretchable Conductive Covalent Coacervate Gels for Electronic Skin.

Highly stretchable electrically conductive hydrogels have been extensively researched in recent years, especially for applications in strain and pressure sensing, electronic skin, and implantable bioelectronic devices. Herein, we present a new cross-linked complex coacervate approach to prepare conductive hydrogels that are both highly stretchable and compressive. The gels involve a complex coacervate between carboxylated nanogels and branched poly(ethylene imine), whereby the latter is covalently cross-linked by poly(ethylene glycol) diglycidyl ether (PEGDGE). Inclusion of graphene nanoplatelets (Gnp) provides electrical conductivity as well as tensile and compressive strain-sensing capability to the hydrogels. We demonstrate that judicious selection of the molecular weight of the PEGDGE cross-linker enables the mechanical properties of these hydrogels to be tuned. Indeed, the gels prepared with a PEGDGE molecular weight of 6000 g/mol defy the general rule that toughness decreases as strength increases. The conductive hydrogels achieve a compressive strength of 25 MPa and a stretchability of up to 1500%. These new gels are both adhesive and conformal. They provide a self-healable electronic circuit, respond rapidly to human motion, and can act as strain-dependent sensors while exhibiting low cytotoxicity. Our new approach to conductive gel preparation is efficient, involves only preformed components, and is scalable.

Development of an in situ injectable hydrogel containing hyaluronic acid for neural regeneration.

In this work, a novel enzymatically crosslinked injectable hydrogel comprising hyaluronic acid (HyA), dopamine (DA), and 3-(4-hydroxyphenyl) propionic acid (HPA) conjugates was successfully developed. To the best of our knowledge, it is the first time that HPA is conjugated to a HyA-based backbone. In situ hydrogelation of HyA-DA-HPA occurred in the presence of hydrogen peroxide (H2O2) as an oxidant and horseradish peroxidase (HRP) as a catalyst. Proton nuclear magnetic resonance and Fourier transform infrared spectroscopy were used to characterize the chemical reactions between HyA, DA, and HPA. Gel formation completed between 3 s to 5 min depending on the concentrations of polymer, HRP, and H2O2. Crosslinked HyA-DA-HPA gels acquired storage moduli ranging from ∼100 Pa to ∼20 000 Pa (at f = 2000 rad s-1). Biocompatibility of the hydrogels was examined with human mesenchymal stem cells (hMSCs) and human induced pluripotent stem cell-derived neural stem cells. The hydrogels made of 2.0 w/v% HyA-DA-HPA hydrogels, 0.24 U ml-1 HRP and ≤ 0.5 µmol ml-1 H2O2 were found biocompatible with hMSCs cultured on and encapsulated within the hydrogels. Since HyA serves as a backbone of the extracellular matrix in the central nervous system (CNS) and DA acquires the ability to restore dopaminergic neurons, use of this injectable HyA-DA-HPA hydrogel for stem cell transplantation is a potential treatment strategy for CNS repair and regeneration.

Development of thermo-responsive polycaprolactone macrocarriers conjugated with Poly(N-isopropyl acrylamide) for cell culture.

Poly(N-isopropyl acrylamide) (PNIPAAm) is a well-known 'smart' material responding to external stimuli such as temperature. PNIPAAm was successfully conjugated to polycaprolactone (PCL) bead surfaces through amidation reaction. Functionalization steps were characterized and confirmed by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy and Energy Dispersion Spectroscopy. PNIPAAm-conjugated PCL allowed human dermal fibroblast cells (HDF) and mesenchymal stem cells (MSC) to adhere, spread, and grow successfully. By reducing the temperature to 30 °C, more than 70% of HDF were detached from PNIPAAm-conjugated PCL macrocarriers with 85% viability. The cell detachment ratio by trypsin treatment was slightly higher than that induced by reduced temperature, however, cell detachment from PNIPAAm-conjugated macrocarriers by lowering the temperature significantly reduced cell death and increased both cell viability and the recovery potential of the detached cells. HDF attachment and detachment were also observed by Live-Dead staining and phase contrast imaging. The expression of extracellular matrix proteins such as Laminin and Fibronectin was also affected by the trypsinization process but not by the reduced temperature process. Taken together, our results showed that thermo-responsive macrocarriers could be a promising alternative method for the non-invasive detachment of cells, in particular for tissue engineering, clinical applications and the use of bioreactors.