Green Analytical Method for Simultaneous Determination of Glucosamine and Calcium in Dietary Supplements by Capillary Electrophoresis with Capacitively Coupled Contactless Conductivity Detection.

The need for analytical methods that are fast, affordable, and ecologically friendly is expanding. Because of its low solvent consumption, minimal waste production, and speedy analysis, capillary electrophoresis is considered a "green" choice among analytical separation methods. With these "green" features, we have utilized the capillary electrophoresis method with capacitively coupled contactless conductivity detection (CE-C4D) to simultaneously determine glucosamine and Ca2+ in dietary supplements. The CE analysis was performed in fused silica capillaries (50 µm inner diameter, 40 cm total length, 30 cm effective length), and the analytical time was around 5 min. After optimization, the CE conditions for selective determination of glucosamine and Ca2+ were obtained, including a 10 mM tris (hydroxymethyl) aminomethane/acetic acid (Tris/Ace) buffer of pH 5.0 as the background electrolyte; separation voltage of 20 kV; and hydrodynamic injection (siphoning) at 25 cm height for 30 s. The method illustrated good linearity over the concentration range of 5.00 to 200 mg/L of for glucosamine (R 2 = 0.9994) and 1.00 to 100 mg/L for Ca2+ (R 2 = 0.9994). Under the optimum conditions, the detection limit of glucosamine was 1.00 mg/L, while that of Ca2+ was 0.05 mg/L. The validated method successfully analyzed glucosamine and Ca2+ in seven dietary supplement samples. The measured concentrations were generally in line with the values of label claims and with cross-checking data from reference methods (HPLC and ICP-OES).

Development of Simple Analytical Method for B-Group Vitamins in Nutritional Products: Enzymatic Digestion and UPLC-MS/MS Quantification.

A method for the simultaneous determination of seven B-group vitamers including thiamine, riboflavin, nicotinamide, niacin, pyridoxine, pyridoxal, and pyridoxamine in nutritional products by using enzymatic digestion followed by LC-MS/MS quantification was studied. The LC-MS/MS conditions such as MS transitions, mobile phase programs, and ammonium formate buffer concentrations, and sample treatment procedures (e.g., concentrations of buffer solution, digestion temperature, and digestion time) were investigated. The analytical method performance was evaluated by multiple criteria such as selectivity, linearity, detection and quantification limits, repeatability, reproducibility, and recovery by using real sample matrices. The validated method was successfully applied to analyze vitamin B concentrations in different nutritional products like ultra-heat-treated milk, powdered milk, and nutritional powder. Vitamin B concentrations varied over a wide range from lower than detection limits to about 9000 µg/100 g, depending on vitamin groups, compound forms, and sample types. The measured concentrations of B-group vitamins in our samples were generally in good agreement with values of label claims.

Use of coffee flower as a novel resource for the production of bioactive compounds, melanoidins, and bio-sugars.

Although coffee beans have been widely studied, application of coffee flower (CF) has not been previously investigated. Here, we evaluated the use of CF for the production of bioactive compounds, melanoidins, and bio-sugars through the green process. Pressurized hot water extraction was found to be the most appropriate method for extracting bioactive compounds from CF, which contain high values of total phenolic content and have antioxidant properties. Caffeine and trigonelline were the main compounds in CF with yields of 1070.8 mg and 1092.8 mg/100 g dry weight (DW), respectively. Melanoidins were also identified and quantified in the CF extracts that is approximately 30.2% were efficiently recovered in the initial extracts of CF. Bio-sugar was also obtained from cellulase and pectinase at a 92.8% conversion rate. The aim of this study is to promote a novel approach using high amounts of CFs in the production of functional healthy foods and beverages.

Dental cement's biological and mechanical properties improved by ZnO nanospheres.

Metal oxide nanoparticles are a new class of important materials used in a wide variety of biomedical applications. Bulk zinc oxide (ZnO) particles have been used for temporal or permanent luting cement because of their excellent mechanical strength and biocompatibility. ZnO nanoparticles have distinct optical and antibacterial properties and a high surface-to-volume ratio. We investigated the mechanical and antibacterial properties of luting cement with different ratios of ZnO nanospheres. We showed that luting cement with 5% and 10% ZnO nanospheres was less soluble in low-pH (pH 3) artificial saliva. Antibacterial activity was 40% higher for Streptococcus mutans and 90% higher for Porphyromonas gingivalis when >10% (w/v) of the bulk particles were replaced with ZnO nanospheres in ZnO polycarboxylate cement. ZnO nanospheres were also biocompatible with mammalian cells. Additionally, the compressive strength was 1.2 times greater and the diametral tensile strength was 1.5 times greater for cements with 10% ZnO nanospheres than for conventional ZnO polycarboxylate cement. We propose a new method for improving dental luting cement by integrating it with ZnO nanospheres. This method simultaneously adds their greater antibacterial, mechanical, and acid resistance properties and retains an outstanding degree of biocompatibility.

Combining cohort analysis and monitoring of HIV early-warning indicators of drug resistance to assess antiretroviral therapy services in Vietnam.

Antiretroviral therapy (ART) retention and 5 early-warning indicators (EWIs) of HIV drug resistance (HIVDR) were abstracted at 27 adult and 4 pediatric clinics in Vietnam in 2009. Of 4531 adults and 313 children, 81.2% and 84.4% respectively were still on ART at 12 months. More than 90% of the clinics monitored achieved the World Health Organization (WHO) targets for lost-to-follow-up (LTFU), ART prescribing practices, and ARV supply continuity. Only 83.9% of the clinics met the target for first-line ART retention and 79.3% met the target for clinic appointment-keeping. Clinic factors (i.e. number of patients, administrative level, and geographical region) were associated with ART retention and LFTU. Data were useful in guiding public health action to optimize ART services.

A new analytical framework of 'continuum of prevention and care' to maximize HIV case detection and retention in care in Vietnam.

BACKGROUND: The global initiative 'Treatment 2.0' calls for expanding the evidence base of optimal HIV service delivery models to maximize HIV case detection and retention in care. However limited systematic assessment has been conducted in countries with concentrated HIV epidemic. We aimed to assess HIV service availability and service connectedness in Vietnam. METHODS: We developed a new analytical framework of the continuum of prevention and care (COPC). Using the framework, we examined HIV service delivery in Vietnam. Specifically, we analyzed HIV service availability including geographical distribution and decentralization and service connectedness across multiple services and dimensions. We then identified system-related strengths and constraints in improving HIV case detection and retention in care. This was accomplished by reviewing related published and unpublished documents including existing service delivery data. RESULTS: Identified strengths included: decentralized HIV outpatient clinics that offer comprehensive care at the district level particularly in high HIV burden provinces; functional chronic care management for antiretroviral treatment (ART) with the involvement of people living with HIV and the links to community- and home-based care; HIV testing and counseling integrated into tuberculosis and antenatal care services in districts supported by donor-funded projects, and extensive peer outreach networks that reduce barriers for the most-at-risk populations to access services. Constraints included: fragmented local coordination mechanisms for HIV-related health services; lack of systems to monitor the expansion of HIV outpatient clinics that offer comprehensive care; underdevelopment of pre-ART care; insufficient linkage from HIV testing and counseling to pre-ART care; inadequate access to HIV-related services in districts not supported by donor-funded projects particularly in middle and low burden provinces and in mountainous remote areas; and no systematic monitoring of referral services. CONCLUSIONS: Our COPC analytical framework was instrumental in identifying system-related strengths and constraints that contribute to HIV case detection and retention in care. The national HIV program plans to strengthen provincial programming by re-defining various service linkages and accelerate the transition from project-based approach to integrated service delivery in line with the 'Treatment 2.0' initiative.