Water reclamation and microbial community investigation: Treatment of tetramethylammonium hydroxide wastewater through an anaerobic osmotic membrane bioreactor hybrid system.

Tetramethylammonium hydroxide (TMAH) is a toxic photoresist developer used in the photolithography process in thin-film transistor liquid crystal display (TFT-LCD) production, and it can be removed through anaerobic treatment. TMAH cannot be released into the environment because of its higher toxicity. A tight membrane, such as a forward osmosis (FO) membrane, together with an anaerobic biological process can ensure that no TMAH is released into the environment. Thus, for the first time, an anaerobic osmotic membrane bioreactor (AnOMBR) hybrid system was developed in this study to treat a low-strength TMAH wastewater and to simultaneously investigate its microbial community. Microfiltration extraction was used to mitigate the salinity accumulation, and a periodically physical water cleaning was utilized to mitigate the FO membrane fouling. The diluted draw solute (MgSO4) was reconcentrated and reused by a membrane distillation (MD) process in the AnOMBR to achieve 99.99% TMAH removal in this AnOMBR-MD hybrid system, thereby ensuring that no TMAH is released into the natural environment. Moreover, the membrane fouling in the feed and draw sides were analyzed through the fluorescence excitation-emission matrix (FEEM) spectrophotometry to confirm that the humic acid-like materials were the primary membrane fouling components in this AnOMBR. Additionally, 16S rRNA metagenomics analysis indicated that Methanosaeta was the predominant contributor to methanogenesis and proliferated during the long-term operation. The methane yield was increased from 0.2 to 0.26 L CH4/g COD when the methanogen species acclimatized to the saline system.

Application of progressive freezing on forward osmosis draw solute recovery.

Progressive freezing is a solvent purification technology with low energy requirements and high concentration efficiency. Although these advantages make it a promising technology, the technique has never been explored for draw solution recovery for forward osmosis (FO). Hence, in this study, the progressive freezing process was used to concentrate three common diluted draw solutions: NaCl, MgCl2, and EDTA-2Na with different ice front speeds, stirring rates, and initial draw solution concentrations. Effective partition and intrinsic partition constants were also evaluated. The results reveal that the freezing process can achieve a draw solution recovery rate of 99.73%, 99.06%, and 98.65% with NaCl, MgCl2, and EDTA-2Na, respectively, using an ice front speed of 0.5 cm/h, a stirring rate of 2.62 m/s, and 30% of percentage of ice phase. Higher concentration efficiency for NaCl and MgCl2 was achieved due to the high solubility of NaCl and MgCl2 increased solute diffusion into the liquid phase solutions. The concentration factors for all three draw solutions exceeded 1.9, indicating that the draw solutes could be reused for the FO process. In addition, the two mass transfer coefficients depended on the ice front speed and the stirring rates were also obtained for scaling up the experiment in the future.