CO2-Mediated Alkali-Neutralization Curdlan Hydrogels for Potential Wound Healing Application.

Physical hydrogels of natural polysaccharides are considered as ideal candidates for wound dressing due to their natural biological activity and no harmful cross-linking agents. However, it remains a challenge to fabricate such hydrogel dressings in a facile and low-cost way. Herein, we reported an easy and cost-effective method to construct CO2-mediated alkali-neutralization Curdlan (CR) hydrogels without using an external cross-linking agent. Two types of hydrogels (denoted as CR-NaOH and CR-Na3PO4, respectively) were fabricated by dissolving CR powders in a NaOH or Na3PO4 aqueous solution, followed by keeping the CR alkaline solutions in air. The obtained pure CR hydrogels possessed a tunable porous structure with walls containing different forms of nanofibrils. These hydrogels exhibited much higher gel strength by comparison with the gels prepared by conventional heating treatment. They were flexible, stretchable, twistable, and conformable to arbitrarily curved skins. Moreover, they exhibited ideal swellability, proper degradability, and water vapor transmission rate, and their physicochemical properties were closely related to CR concentration in the alkaline solution. These two hydrogels also supported the growth of L929 cells. Importantly, studies on wound healing revealed that both 3CR-NaOH and 3CR-Na3PO4 hydrogels were capable of accelerating the wound healing process through recruiting more macrophages/fibroblasts, inducing more collagen deposition and neovascularization (α-SMA and CD31) without carrying any exogenous bioactive components. In conclusion, the present work not only reported promising materials for application in wound therapy but also offered a facile and safe manufacturing procedure for generating pure CR physical hydrogels with better performance.

3D printed strontium-zinc-phosphate bioceramic scaffolds with multiple biological functions for bone tissue regeneration.

Calcium phosphate (CaP) bioceramics are broadly employed for bone regeneration due to their excellent biocompatibility and osteoconductivity. However, they are not capable of repairing healing-impaired bone defects such as defects with conditions of ischemia or infection due to restricted bioactivities. In this study, we synthesized single-phased strontium-zinc-phosphate (SZP, SrZn2(PO4)2) bioceramics via a solution combustion method and further fabricated SZP scaffolds using a three-dimensional (3D) printing technique. Compared to 3D printed ß-tricalcium phosphate (ß-TCP) scaffolds, the 3D printed SZP scaffolds presented comparable porosity, compressive strength, and Young's modulus, but increased ability of osteogenesis, angiogenesis, immunomodulation and anti-bacterial activity. Specifically, 3D printed SZP scaffolds not only led to significantly higher osteogenic differentiation of MC3T3-E1 cells and pro-angiogenesis of human umbilical vein endothelial cells (HUVECs) directly or through macrophage-mediated immunomodulation, but also inhibited the growth of Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). The in vivo study of the rat cranial bone defect model further confirmed better vascularized bone regeneration in 3D-printed SZP scaffolds. These findings indicate that the proposed 3D-printed SZP scaffolds might be a versatile candidate for bone tissue engineering.

Mild Heat-Assisted Polydopamine/Alginate Hydrogel Containing Low-Dose Nanoselenium for Facilitating Infected Wound Healing.

In clinical practice, it has become urgent to develop multifunctional wound dressings that can combat infection and prompt wound healing simultaneously. In this study, we proposed a polydopamine/alginate/nanoselenium composite hydrogel (Alg-PDA-Se) for the treatment of infected wounds. In particular, polydopamine endows the composite hydrogel with controllable near-infrared photothermal properties, while low-dosage selenium nanoparticles (Se NPs) offer excellent anti-oxidation, anti-inflammatory, pro-proliferative, pro-migration, and pro-angiogenic performances, which are verified by multiple cells, including macrophages, fibroblasts, and endothelial cells. More interestingly, the combination of mild temperature with low-dosage Se NPs produces a synergistic effect on combating both Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) and promoting the healing of bacteria-infected wounds in vivo. We anticipate that the designed composite hydrogel might be a potential candidate for anti-infection bioactive dressing.

Nanosized concave pit/convex dot microarray for immunomodulatory osteogenesis and angiogenesis.

The immunomodulatory capability of biomaterials is of paramount importance for successful material-mediated bone regeneration. Particularly, the design of surface nano-topography can be leveraged to instruct immune reactions, yet the understanding of such "nano-morphology effect" is still very limited. Herein, highly ordered nano-concave pit (denoted as NCPit) and nano-convex dot (denoted as NCDot) microarrays with two different sizes were successfully constructed on a 316LSS surface via anodization and subsequently immersion-coating treatment, respectively. We, for the first time, comparatively investigated the interactions of NCPit and NCDot microarrays with RAW264.7 macrophages and their immunomodulatory impacts on osteogenesis and angiogenesis of human bone mesenchymal stem cells (hBMSCs) and human umbilical vein endothelial cells (HUVECs). NCDot microarrays induced macrophages towards M2 polarization with the higher expression level of anti-inflammatory markers (IL-10 and CD 206) and the lower level of pro-inflammatory markers (TNF-α, IL-1ß, IL-6 and CD 86) than those of the corresponding NCPit microarrays. During the process, the expressions of osteogenesis-related genes (Runx2, OPN and OCN) of hBMSCs, and angiogenesis-related genes (eNOS, HIF-1α, KDR and VEGF) of HUVECs were significantly upregulated by the NCDot microarray-modulating immune microenvironment of macrophages, and finally stimulated osteogenesis and angiogenesis. Thus, the prepared NCDot arrays were able to significantly promote osteo-/angiogenic activity by generating a more suitable immune microenvironment than NCPit arrays, offering substantial evidence for designing immunomodulatory biomaterials with specific microstructures and optimal bioactivity.

Construction of selenium-embedded mesoporous silica with improved antibacterial activity.

In this work, different concentrations of Se-incorporated mesoporous silica nanospheres (MSNs) (5Se/MSNs and 10Se/MSNs) were successfully synthesized via an in-situ one-pot method. Their physicochemical properties were characterized by X-ray diffraction (XRD), transmission electron microscopy, and X-ray photoelectron spectroscopy (XPS). The release behaviors of Se and Si were investigated in a phosphate-buffered saline (pH = 5.5, 7.4) solution (PBS). In vitro antibacterial properties of the prepared samples were evaluated with Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). The cytocompatibilities of the samples were then assessed using L929 cells. Se nanoparticles were successfully loaded onto the outer and inner surfaces of hierarchical mesoporous silica. The sizes of the Se/MSNs nanoparticles were approximately 120 nm for 5Se/MSNs and 210 nm for 10Se/MSNs. The XRD and XPS results showed that Se mainly existed in the form of Se0 in the samples. The Se/MSNs exhibited stable and sustained release of both Si and Se in PBS solution. In vitro antibactericidal tests indicated that the Se/MSNs could exhibit better antibacterial activity against S. aureus than pure Se nanoparticles after 6 and 24 h of culturing. The minimal inhibitory concentration (MIC) of 10Se/MSN was 100 µg mL-1. However, the Se/MSNs exhibited no inhibitory effect on E. coli bacteria. Furthermore, all the samples exhibited excellent cell viability. These studies demonstrate initial in vitro antibacterial activity and good cytocompatibility of Se/MSNs and their potential application in antibacterial nanomedicine.

Cytocompatibility and Bone-Formation Potential of Se-Coated 316L Stainless Steel with Nano-Pit Arrays.

316L stainless steel is still widely applied in joint replacement and orthopedic surgery due to its mechanical properties, corrosion resistance and relatively low price. In this study, electrochemical oxidation and nanoscale coating were used to fabricate Se-coated 316L stainless steel with nano-pit arrays to enhance its surface characteristics, biocompatibility and osseointegration ability. The modified 316L stainless steel was tested via field emission scanning microscopy (FESEM), energy-dispersive X-ray spectrometry (EDS), X-ray photoelectron spectroscopy (XPS) and Se release studies. The results of this study showed that the nano-pit arrays were 50 nm in diameter and that the Se coating consisted primarily of elemental Se and exhibited sustained release. The biological response of the samples was evaluated using in vitro rat bone marrow mesenchymal stem cell (rBMSCs) experiments and in vivo animal experiments. The modified 316L stainless steel displays enhanced abilities of cell adhesion, proliferation and osteogenic activity, as shown by FESEM, CCK-8 assay, immunofluorescence microscopy (IF) and alkaline phosphatase (ALP) activity assay in vitro and additional new bone formation in vivo, indicating its outstanding cytocompatibility and osteogenic differentiation ability. More importantly, the Se coating can upregulate gene expression of OPN, RUNX-2 and ALP, indicating that the nano-Se-coated 316L stainless steel with nano-pit arrays is a promising biomedical material for implants in orthopedic or dental clinic applications.

Nanoporous microstructures mediate osteogenesis by modulating the osteo-immune response of macrophages.

The osteoimmune environment plays indispensable roles in bone regeneration because the early immune environment that exists during the regenerative process promotes the recruitment and differentiation of osteoblastic lineage cells. The response of immune cells growing on nanotopographic surfaces and the microenvironment they generate should be considered when evaluating nanotopography-mediated osteogenesis, which are topics that are generally neglected in the field. In this study, we investigated the modulatory effects of nanoporous anodic alumina with different sized pores on macrophage responses and their subsequent effects on the osteogenic differentiation of bone marrow stromal cells (BMSCs). The nanopore structure and the pore size were found to be important adhesive cues for macrophages, which affected their spreading and cell shape, subsequently regulated the expression and activation of autophagy pathway components (LC3A/B, Beclin-1, Atg3, Atg7, and P62) and modulated the inflammatory response, osteoclastic activities, and release of osteogenic factors. Subsequently, the osteogenic pathways (Wnt and BMP) of BMSCs were found to be regulated by different nanopore-induced inflammatory environments, which affected the osteogenic differentiation outcomes. This study is the first to emphasize the effects of immune cells on nanotopography-mediated osteogenesis, which could lead to a new strategy for the development of advanced nanobiomaterials for tissue engineering, nanomedicine and immunotherapeutic applications.

Enhanced apatite-forming ability and antibacterial activity of porous anodic alumina embedded with CaO-SiO2-Ag2O bioactive materials.

In this study, to provide porous anodic alumina (PAA) with bioactivity and anti-bacterial properties, sol-gel derived bioactive CaO-SiO2-Ag2O materials were loaded onto and into PAA nano-pores (termed CaO-SiO2-Ag2O/PAA) by a sol-dipping method and subsequent calcination of the gel-glasses. The in vitro apatite-forming ability of the CaO-SiO2-Ag2O/PAA specimens was evaluated by soaking them in simulated body fluid (SBF). The surface microstructure and chemical property before and after soaking in SBF were characterized. Release of ions into the SBF was also measured. In addition, the antibacterial properties of the samples were tested against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The results showed that CaO-SiO2-Ag2O bioactive materials were successfully decorated onto and into PAA nano-pores. In vitro SBF experiments revealed that the CaO-SiO2-Ag2O/PAA specimens dramatically enhanced the apatite-forming ability of PAA in SBF and Ca, Si and Ag ions were released from the samples in a sustained and slow manner. Importantly, E. coli and S. aureus were both killed on the CaO-SiO2-Ag2O/PAA (by 100%) samples compared to PAA controls after 3 days of culture. In summary, this study demonstrated that the CaO-SiO2-Ag2O/PAA samples possess good apatite-forming ability and high antibacterial activity causing it to be a promising bioactive coating candidate for implant materials for orthopedic applications.

Highly Ordered Porous Anodic Alumina with Large Diameter Pores Fabricated by an Improved Two-Step Anodization Approach.

The aim of this study is to prepare highly ordered porous anodic alumina (PAA) with large pore sizes (> 200 nm) by an improved two-step anodization approach which combines the first hard anodization in oxalic acid-water-ethanol system and second mild anodization in phosphoric acid-water-ethanol system. The surface morphology and elemental composition of PAA are characterized by field emission scanning electron microscopy (FESEM) and energy-dispersive X-ray spectrometer (EDS). The effects of matching of two-step anodizing voltages on the regularity of pore arrangement is evaluated and discussed. Moreover, the pore formation mechanism is also discussed. The results show that the nanopore arrays on all the PAA samples are in a highly regular arrangement and the pore size is adjustable in the range of 200-300 nm. EDS analysis suggests that the main elements of the as-prepared PAA are oxygen, aluminum and a small amount of phosphorus. Furthermore, the voltage in the first anodization must match well with that in the second anodization, which has significant influence on the PAA regularity. The addition of ethanol to the electrolytes effectively accelerates the diffusion of the heat that evolves from the sample, and decreases the steady current to keep the steady growth of PAA film. The improved two-step anodization approach in this study breaks through the restriction of small pore size in oxalic acid and overcomes the drawbacks of irregular pore morphology in phosphoric acid, and is an efficient way to fabricate large diameter ordered PAA.

Understanding improved osteoblast behavior on select nanoporous anodic alumina.

The aim of this study was to prepare different sized porous anodic alumina (PAA) and examine preosteoblast (MC3T3-E1) attachment and proliferation on such nanoporous surfaces. In this study, PAA with tunable pore sizes (25 nm, 50 nm, and 75 nm) were fabricated by a two-step anodizing procedure in oxalic acid. The surface morphology and elemental composition of PAA were characterized by field emission scanning electron microscopy and X-ray photoelectron spectroscopy analysis. The nanopore arrays on all of the PAA samples were highly regular. X-ray photoelectron spectroscopy analysis suggested that the chemistry of PAA and flat aluminum surfaces were similar. However, contact angles were significantly greater on all of the PAA compared to flat aluminum substrates, which consequently altered protein adsorption profiles. The attachment and proliferation of preosteoblasts were determined for up to 7 days in culture using field emission scanning electron microscopy and a Cell Counting Kit-8. Results showed that nanoporous surfaces did not enhance initial preosteoblast attachment, whereas preosteoblast proliferation dramatically increased when the PAA pore size was either 50 nm or 75 nm compared to all other samples (P<0.05). Thus, this study showed that one can alter surface energy of aluminum by modifying surface nano-roughness alone (and not changing chemistry) through an anodization process to improve osteoblast density, and, thus, should be further studied as a bioactive interface for orthopedic applications.

A mechanism for the enhanced attachment and proliferation of fibroblasts on anodized 316L stainless steel with nano-pit arrays.

In this study, 316L stainless steel with tunable nanometer pit sizes (0, 25, 50, and 60 nm) were fabricated by an anodization procedure in an ethylene glycol electrolyte solution containing 5 vol % perchloric acid. The surface morphology and elemental composition of the 316L stainless steel were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS). The nano-pit arrays on all of the 316L stainless steel samples were in a regular arrangement. The surface properties of the 316L stainless steel nano-pit surface showed improved wettability properties as compared with the untreated 316L stainless steel, as demonstrated by the lower contact angles which dropped from 83.0° to 28.6 to 45.4°. The anodized 316L stainless steel surfaces with 50 nm and 60 nm diameter pits were also more rough at the nanoscale. According to MTT assays, compared with unanodized (that is, nano-smooth) surfaces, the 50 and 60 nm diameter nano-pit surfaces dramatically enhanced initial human dermal fibroblast attachment and growth for up to 3 days in culture. Mechanistically, this study also provided the first evidence of greater select protein adsorption (specifically, vitronectin and fibronectin which have been shown to enhance fibroblast adhesion) on the anodized 316L stainless steel compared with unanodized stainless steel. Such nano-pit surfaces can be designed to support fibroblast growth and, thus, improve the use of 316L stainless steel for various implant applications (such as for enhanced skin healing for amputee devices and for percutaneous implants).

In vitro apatite formation on porous anodic alumina induced by a phosphorylation treatment.

In this study, a phosphorylation treatment of porous anodic alumina (PAA) was performed by wet impregnation in phosphoric acid and a subsequent heat treatment. The PAA and phosphorylated PAA specimens were analyzed using a field emission scanning electron microscope, an energy-dispersive X-ray spectrometer, and Fourier transform infrared spectroscopy. The apatite-forming ability of the phosphorylated PAA was evaluated by soaking the specimens in simulated body fluid for 1, 3, and 7 days. The surface microstructures and chemical property changes after soaking in simulated body fluid were again characterized by field emission scanning electron microscope, energy-dispersive X-ray spectrometer, and Fourier transform infrared spectroscopy. Results of this study demonstrated that the functional -PO4 groups introduced onto the PAA surface dramatically promoted the deposition of bone-like apatite on PAA. The results from this study indicated that the phosphorylation treatment of anodic alumina is an effective method for inducing bone-like apatite formation, and this phosphorylated PAA can be a promising candidate to be used as bioactive surface coatings on implant metals and alloys for orthopedic and dental applications.

In vitro degradation, bioactivity, and cytocompatibility of calcium silicate, dimagnesium silicate, and tricalcium phosphate bioceramics.

CaSiO3 (CS) ceramics have been regarded as a potential bioactive material for bone regeneration. Mg2SiO4 (M2S) ceramic has been reported as a novel bioceramic with higher mechanical properties and good biocompatibility recently. beta-Ca2(PO4)2 (beta-TCP) ceramic is a well-known bioactive and degradable material for bone repair. The aim of this study is to investigate and compare the effect of three bioceramics with different chemical composition on the in vitro degradation, apatite-forming ability in simulated body fluid (SBF) and cytocompatibility. The degradation was evaluated through the activation energy of Si or P ion released from ceramics and the weight loss of the ceramics in Tris-HCl buffer solution. Formation of bone-like apatite on different bioceramic surfaces was investigated in SBF. The presence of bone-like apatite layer on the material surface after soaking in SBF was demonstrated by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM). The effect of ionic products from the three kinds of material dissolution on osteoblast-like cell proliferation was investigated. The results showed that the degradation rate of CS was much faster than that of beta-TCP and M2S ceramics. Apatite formation occurred on the CS ceramics quickly. However, it was less likely to occur on the surfaces of beta-TCP and M2S ceramics. The ionic products from extracts of CS and M2S could stimulate osteoblast-like cell proliferation at certain concentration range throughout the 6-day culture period.

In vitro studies of novel CaO-SiO2-MgO system composite bioceramics.

In this study, a series of CaO-SiO(2)-MgO composites with different beta-CaSiO(3) (CS)/Mg(2)SiO(4) (M(2)S) composite ratios were prepared to produce new bioactive and biodegradable biomaterials for potential bone repair. The mechanical properties of CS-M(2)S composites increased steadily with the increase of M(2)S ratios in composites. Dissolution tests in Tris-HCl buffer solution showed obvious differences with different CS initial composite ratio in composites. The dissolution rate increased with the increase of CS composite ratio, which suggested that the solubility of composites could be tailored by adjusting the initial CS/M(2)S composite ratio. Formation of bone-like apatite on a range of CS-M(2)S composites with CS weight percentage ranging from 0 to 100 has been investigated in simulated body fluid (SBF). The presence of bone-like apatite layer on the composite surface after soaking in SBF was demonstrated by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM). The results showed that the apatite formation ability of the CS-M(2)S composite with 70% CS was detected after 10 days immersion. In vitro cell experiments showed that the 50 and 70% CS composites supported greater osteoblast-like cell proliferation as compared with pure M(2)S (p<0.05). The results of this study suggested that the CS-M(2)S composites with 50 and 70% initial CS composite amount might be more suitable for preparation of bone repair materials.

Beta-CaSiO3/beta-Ca3(PO4)2 composite materials for hard tissue repair: in vitro studies.

In this study, a series of beta-CaSiO(3) (CS)/beta-Ca(3)(PO(4))(2) (TCP) composites with different ratios were prepared to produce new bioactive and biodegradable biomaterials for potential bone repair. The mechanical properties of CS-TCP composites increased steadily with the increase of TCP amounts in composites. Formation of bone-like apatite on a range of CS-TCP composites with CS weight percentage ranging from 0 to 100 has been investigated in simulated body fluid (SBF). The presence of bone-like apatite layer on the composite surface after soaking in SBF was demonstrated by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and fourier transform infrared reflection spectroscopy (FTIR). The results showed that the apatite formation ability of the CS-TCP composite was enhanced with increasing CS content in the composites. For composites with more than 50% CS contents, the samples were completely covered by a layer of dense bone-like apatite just after 3 days immersion. Dissolution tests in Tris-HCl buffer solution showed obvious differences with different CS contents in composites. The dissolution rate increased with the increase of CS content, which suggested that the solubility of biphasic composites could be tailored by adjusting the initial CS/TCP ratio. In vitro cell experiments showed that higher content of CS phase in composites promoted cell proliferation and differentiation. When the CS amount in the composite increased to 50%, the proliferation rate and ALP activities of osteoblast-like cells showed significant difference compared with pure TCP (p < 0.05). Results of the study suggested that the CS-TCP composites with more than 50% CS content might be promising bone repair materials.

A novel bioactive porous bredigite (Ca7MgSi4O16) scaffold with biomimetic apatite layer for bone tissue engineering.

The aim of this study was to develop a novel bioactive, degradable and cytocompatible bredigite (Ca(7)MgSi(4)O(16)) scaffold with biomimetic apatite layer for bone tissue engineering. Porous bredigite scaffolds were prepared using polymer sponge method. The bredigite scaffolds with biomimetic apatite layer (BTAP) were obtained by soaking bredigite scaffolds in simulated body fluid (SBF) for 10 days. The porosity and in vitro degradability of BTAP scaffolds were investigated. In addition, osteoblast-like cell morphology, proliferation and differentiation on BTAP scaffolds were evaluated and compared with beta-tricalcium phosphate (beta-TCP) scaffolds. The results showed that BTAP scaffolds possessed 90% of porosity. The degradation of BTAP scaffolds was comparable to that of beta-TCP scaffolds. Cells on BTAP scaffolds spread well and presented a higher proliferation rate and differentiation level as compared with those on beta-TCP scaffolds. Our results indicated that BTAP scaffolds were degradable and possessed the function to enhance cell proliferation and differentiation, and might be used as bone tissue engineering materials.

Comparison of osteoblast-like cell responses to calcium silicate and tricalcium phosphate ceramics in vitro.

Calcium silicate ceramics have been proposed as new bone repair biomaterials, since they have proved to be bioactive, degradable, and biocompatible. Beta-tricalcium phosphate ceramic is a well-known degradable material for bone repair. This study compared the effects of CaSiO3 (alpha-, and beta-CaSiO3) and beta-Ca3(PO4)2 (beta-TCP) ceramics on the early stages of rat osteoblast-like cell attachment, proliferation, and differentiation. Osteoblast-like cells were cultured directly on CaSiO3 (alpha-, and beta-CaSiO3) and beta-TCP ceramics. Attachment of a greater number of cells was observed on CaSiO3 (alpha-, and beta-CaSiO3) ceramics compared with beta-TCP ceramics after incubation for 6 h. SEM observations showed an intimate contact between cells and the substrates, significant cells adhesion, and that the cells spread and grew on the surfaces of all the materials. In addition, the proliferation rate and alkaline phosphatase (ALP) activity of the cells on the CaSiO3 (alpha-, and beta-CaSiO3) ceramics were improved when compared with the beta-TCP ceramics. In the presence of CaSiO3, elevated levels of calcium and silicon in the culture medium were observed throughout the 7-day culture period. In conclusion, the results of the present study revealed that CaSiO3 ceramics showed greater ability to support cell attachment, proliferation, and differentiation than beta-TCP ceramic.

In vitro bioactivity of akermanite ceramics.

In this study, the bone-like apatite-formation ability of akermanite ceramics (Ca2MgSi2O7) in simulated body fluid (SBF) and the effects of ionic products from akermanite dissolution on osteoblasts and mouse fibroblasts (cell line L929) were investigated. In addition, osteoblast morphology and proliferation on the ceramics were evaluated. The results showed that akermanite ceramics possessed bone-like apatite-formation ability comparable with bioactive wollastonite ceramics (CaSiO3) after 20 days of soaking in SBF and the mechanism of bone-like apatite formation on akermanite ceramics is similar to that of wollastonite ceramics. The Ca, Si, and Mg ions from akermanite dissolution at certain ranges of concentration significantly stimulated osteoblast and L929 cell proliferation. Furthermore, osteoblasts spread well on the surface of akermanite ceramics, and proliferated with increasing the culture time. The results showed that akermanite ceramics possess bone-like apatite-formation ability and can release soluble ionic products to stimulate cell proliferation, which indicated good bioactivity.

Porous akermanite scaffolds for bone tissue engineering: preparation, characterization, and in vitro studies.

The aim of this study was to develop a bioactive, degradable, and cytocompatible akermanite (Ca2MgSi2O7) scaffold with high porosity and pore interconnectivity. In brief, porous akermanite scaffolds were prepared using polymer sponge method. The porosity and corresponding compressive strength were evaluated. The in vitro degradability was investigated by soaking the scaffolds in Ringer's solution. Hydroxyapatite (HAp)-formation ability of akermantite scaffolds in simulated body fluid (SBF) and the effect of ionic products from the scaffolds dissolution on osteoblasts were investigated. In addition, bone marrow stromal cells (BMSC) adhesion and proliferation on the scaffolds were evaluated. Differentiation of the cells was assessed by measuring alkaline phosphatase (ALP) activity. The results showed that akermanite scaffolds possessed 63.5-90.3% of porosity, with a corresponding compressive strength between 1130 and 530 kPa. The weight loss of the scaffolds and ionic content of the Ringer's solution increased with the increase in soaking time, indicating the degradability of scaffolds. HAp was formed on the scaffolds in SBF and the ionic products from akermanite scaffolds dissolution stimulated osteoblasts proliferation, indicating good in vitro bioactivity. Furthermore, BMSC adhered and spread well on akermanite scaffolds and proliferated with the increase in the culture time, and the differentiation rate of osteoblasts on scaffolds was comparable to that on blank culture plate control. Our results suggested that akermanite scaffolds were bioactive, degradable, and cytocompatible, and might be used as bone tissue engineering materials.

A novel bioactive porous CaSiO3 scaffold for bone tissue engineering.

The aim of this study was to fabricate bioactive porous CaSiO3 scaffolds and examine their effects on proliferation and differentiation of osteoblast-like cells. In this study, porous CaSiO3 scaffolds were obtained by sintering a ceramic slip-coated polymer foam at 1350 degrees C. X-ray diffraction (XRD) of the scaffolds indicated that the products were essentially pure alpha-CaSiO3. The obtained scaffolds had a well-interconnected porous structure with pore sizes ranging from several micrometers to more than 100 microm and porosities of 88.5 +/- 2.8%. The in vitro bioactivity of the scaffolds was investigated by soaking them in simulated body fluid (SBF) for 7 days and then characterizing them by scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS) analysis. The results indicated that hydroxyapatite (HAp) was formed on the surface of the scaffolds. In addition, the scaffolds were incubated in Ringer's solution at 37 degrees C to study the in vitro degradation by measurement of weight loss after incubation, which showed that the CaSiO3 scaffolds were degradable. The cellular responses to the scaffolds were assessed in terms of cell proliferation and differentiation. Osteoblast-like cells were seeded into the CaSiO3 scaffolds. SEM observations showed that there was significant cell adhesion, as the cells spread and grew in the scaffolds. In addition, the proliferation rate and alkaline phosphatase (ALP) activity of the cells in the scaffolds were improved as compared to the controls. These studies demonstrate initial in vitro cell compatibility and their potential application to bone tissue engineering.