Self-Assembled Monolayers of a Fluorinated Phosphonic Acid as a Protective Coating on Aluminum.

Aluminum (Al) placed in hot water (HW) at 90 °C is roughened due to its reaction with water, forming Al hydroxide and Al oxide, as well as releasing hydrogen gas. The roughened surface is thus hydrophilic and possesses a hugely increased surface area, which can be useful in applications requiring hydrophilicity and increased surface area, such as atmospheric moisture harvesting. On the other hand, when using HW to roughen specified areas of an Al substrate, ways to protect the other areas from HW attacks are necessary. We demonstrated that self-assembled monolayers (SAMs) of a fluorinated phosphonic acid (FPA, CF3(CF2)13(CH2)2P(=O)(OH)2) derivatized on the native oxide of an Al film protected the underneath metal substrate from HW attack. The intact wettability and surface morphology of FPA-derivatized Al subjected to HW treatment were examined using contact angle measurement, and scanning electron microscopy and atomic force microscopy, respectively. Moreover, the surface and interface chemistry of FPA-derivatized Al before and after HW treatment were investigated by time-of-flight secondary ion mass spectrometry (ToF-SIMS), verifying that the FPA SAMs were intact upon HW treatment. The ToF-SIMS results therefore explained, on the molecular level, why HW treatment did not affect the underneath Al at all. FPA derivatization is thus expected to be developed as a patterning method for the formation of hydrophilic and hydrophobic areas on Al when combined with HW treatment.

Manipulating Li2S2/Li2S mixed discharge products of all-solid-state lithium sulfur batteries for improved cycle life.

All-solid-state lithium-sulfur batteries offer a compelling opportunity for next-generation energy storage, due to their high theoretical energy density, low cost, and improved safety. However, their widespread adoption is hindered by an inadequate understanding of their discharge products. Using X-ray absorption spectroscopy and time-of-flight secondary ion mass spectrometry, we reveal that the discharge product of all-solid-state lithium-sulfur batteries is not solely composed of Li2S, but rather consists of a mixture of Li2S and Li2S2. Employing this insight, we propose an integrated strategy that: (1) manipulates the lower cutoff potential to promote a Li2S2-dominant discharge product and (2) incorporates a trace amount of solid-state catalyst (LiI) into the S composite electrode. This approach leads to all-solid-state cells with a Li-In alloy negative electrode that deliver a reversible capacity of 979.6 mAh g-1 for 1500 cycles at 2.0 A g-1 at 25 °C. Our findings provide crucial insights into the discharge products of all-solid-state lithium-sulfur batteries and may offer a feasible approach to enhance their overall performance.

Detection of gold cysteine thiolate complexes on gold nanoparticles with time-of-flight secondary ion mass spectrometry.

Gold (Au) nanoparticles (NPs) are widely used in nanomedical applications as a carrier for molecules designed for different functionalities. Previous findings suggested that biological molecules, including amino acids, could contribute to the dissolution of Au NPs in physiological environments and that this phenomenon was size-dependent. We, therefore, investigated the interactions of L-cysteine with 5-nm Au NPs by means of time-of-flight secondary ion mass spectrometry (ToF-SIMS). This was achieved by loading Au NPs on a clean aluminum (Al) foil and immersing it in an aqueous solution containing L-cysteine. Upon rinsing off the excessive cysteine molecules, ToF-SIMS confirmed the formation of gold cysteine thiolate via the detection of not only the Au-S bond but also the hydrogenated gold cysteine thiolate molecular ion. The presence of NaCl or a 2-(N-morpholino)ethanesulfonic acid buffer disabled the detection of Au NPs on the Al foil. The detection of larger (50-nm) Au NPs was possible but resulted in weaker cysteine and gold signals, and no detected gold cysteine thiolate signals. Nano-gold specific adsorption of L-cysteine was also demonstrated by cyclic voltammetry using paraffine-impregnated graphite electrodes with deposited Au NPs. We demonstrate that the superior chemical selectivity and surface sensitivity of ToF-SIMS, via detection of elemental and molecular species, provide a unique ability to identify the adsorption of cysteine and formation of gold-cysteine bonds on Au NPs.

Time-of-flight secondary ion mass spectrometry analyses of vancomycin.

As an antibiotic that prevents and treats infections caused by Gram-positive bacteria such as Staphylococcus aureus, vancomycin incorporated in a biodegradable polymer poly(lactide-co-glycolide) provides opportunities to construct controlled-release drug delivery systems. Developments associated with this promising system have been largely concentrated on areas of drug delivery kinetics and biodegradability. In order to provide surface analytical approaches to this important system, the authors demonstrate applicability of time-of-flight secondary ion mass spectrometry (TOF-SIMS) in three-dimensional molecular imaging for a model system consisting of alternating layers of ploy(lactide-co-glycolide) and vancomycin. TOF-SIMS imaging clarified that the two chemicals can undergo phase separation when dimethyl sulfoxide is used as the solvent. The authors identified two diagnostic ions that are abundant and structural moieties of vancomycin. The results on TOF-SIMS imaging and depth profiling vancomycin provide useful information for further applications of TOF-SIMS in the development of antibiotic drug delivery systems involving the use of vancomycin.

Scaffold composed of porous vancomycin-loaded poly(lactide-co-glycolide) microspheres: A controlled-release drug delivery system with shape-memory effect.

Loading antibiotics in a biodegradable polymer matrix is an excellent way to control its release kinetics, which eliminates side effects caused by conventional administrations of the drug. This approach is especially beneficial for bone regeneration when using a scaffold made of a biodegradable polymer loaded with drug agents capable of controllable releases. In this case, the scaffold serves as a mechanical support to tissue formation and the drug agents may provide biomolecules to assist the tissue formation and/or provide antibiotics to prevent tissues from infections. Towards this goal, we have developed an approach to make vancomycin-loaded poly(lactide-co-glycolide) (PLGA) microspheres, from which we made scaffolds by compression molding. In this article we concentrate on characterizing the porosity and drug release profiles, as well as verifying shape-memory effect of the scaffolds. The scaffold was biodegradable and showed a much slower drug release profile than microspheres. We confirmed that our PLGA scaffolds recovered to their permanent shapes when heated to 45°C. We believe that these scaffolds will find applications in bone regeneration where both the use of antibiotics against infection and accommodation to spatial restrictions may be required.

Depth profiling cross-linked poly(methyl methacrylate) films: a time-of-flight secondary ion mass spectrometry approach.

RATIONALE: In order to determine the degree of cross-linking on the surface and its variations in a nanometer-scale depth of organic materials, we developed an approach based on time-of-flight secondary ion mass spectrometry (TOF-SIMS), which provides rich chemical information in the form of fragment ions. TOF-SIMS is extremely surface-sensitive and capable of depth profiling with the use of a sputter ion beam to remove controllable amounts of substance. METHODS: Poly(methyl methacrylate) (PMMA) films spin-coated on a Si substrate were cross-linked using a recently developed, surface sensitive, hyperthermal hydrogen projectile bombardment technique. The ion intensity ratio between two ubiquitous hydrocarbon ions, C6 H- and C4 H- , detected in TOF-SIMS, denoted as ρ, was used to assess the degree of cross-linking of the PMMA films. The cross-linking depth of the PMMA films was revealed by depth profiling ρ into the polymer films using a C60+ sputter beam. RESULTS: The control PMMA film spin-coated on a Si substrate was characterized by ρ = 32% on its surface when using a 25 keV Bi3+ primary ion beam. This parameter on the PMMA films subjected to HHIC treatment for 10, 100 and 500 s increased to 45%, 56% and 65%, respectively. The depth profiles of ρ obtained using a 10 keV C60+ ion beam resembled an exponential decay, from which the cross-linking depth was estimated to be 3, 15 and 39 nm, respectively, for the three cross-linked PMMA films. CONCLUSIONS: We demonstrated that the ion intensity ratio of C6 H- to C4 H- detected in TOF-SIMS provides a unique and simple means to assess the degree of cross-linking of the surface of PMMA films cross-linked by the surface sensitive hyperthermal hydrogen projectile bombardment technique. With a C60+ sputter beam, we were able to depth profile the PMMA films and determine cross-linking depths of the cross-linked polymer films at nanometer resolutions. Copyright © 2017 John Wiley & Sons, Ltd.

Cross-Linking the Surface of Cured Polydimethylsiloxane via Hyperthemal Hydrogen Projectile Bombardment.

Cross-linking of polydimethylsiloxane (PDMS) is increasingly important with recent focus on its top surface stiffness. In this paper, we demonstrate that hyperthermal hydrogen projectile bombardment, a surface sensitive cross-linking technology, is superior in enhancing the mechanical properties of a cured PDMS surface without significantly degrading its hydrophobicity. Both water contact angle measurements and time-of-flight secondary ion mass spectrometry are used to investigate the variations in surface chemistry and structure upon cross-linking. Using nanoindentation and atomic force microscopy, we confirm that the thickness of the cross-linked PDMS is controllable by the bombardment time, which opens opportunities for tuning cross-linking degree in compliance with arising requirements from the practice.

Revealing different bonding modes of self-assembled octadecylphosphonic acid monolayers on oxides by time-of-flight secondary ion mass spectrometry: silicon vs aluminum.

Condensed octadecylphosphonic acid (OPA) dimers, i.e., two OPA molecules combined with the loss of a water molecule, were detected by time-of-flight secondary ion mass spectrometry (TOF-SIMS) on OPA self-assembled monolayers (SAMs) that are only weakly bonded on the native oxide layer of a silicon wafer. In contrast, these condensed dimers were absent on OPA SAMs formed on the oxide layer of an aluminum film, where the OPA molecules are chemically bonded on the substrate through a P-O-Al linkage. These observations lead us to conclude that the OPA molecules in their SAMs have to be free from chemical bonding with the substrate in order for the primary ion beam to generate ion fragments of the condensed dimer. We demonstrate that the detection of condensed OPA dimers serves as an analytical criterion for TOF-SIMS to reveal the bonding mode of OPA molecules in their SAMs on different oxides.

Delivering octadecylphosphonic acid self-assembled monolayers on a Si wafer and other oxide surfaces.

We describe a simple experimental approach for delivering self-assembled monolayers (SAMs) of octadecylphosphonic acid (OPA) on many oxide surfaces using a nonpolar medium with a dielectric constant around 4 (e.g., trichloroethylene). This approach readily results in the formation of full-coverage OPA SAMs on a wide variety of oxide surfaces including cleaved mica, Si wafer, quartz, and aluminum. Especially, the availability of delivering full-coverage OPA SAM on a Si wafer is unique, as no OPA SAMs at all could be formed on a Si wafer when using a polar OPA solution. The reason a nonpolar solvent is superior lies in the very fact that the hydrophilic OPA headgroup tends to escape from the nonpolar solution and is thus enriched at the medium-air interface. It is these OPA headgroups seeking a hydrophilic surface that make possible the well-controlled OPA monolayer on an oxide surface.