Pentacene/perfluoropentacene bilayers on Au(111) and Cu(111): impact of organic-metal coupling strength on molecular structure formation.

As crucial element in organic opto-electronic devices, heterostructures are of pivotal importance. In this context, a comprehensive study of the properties on a simplified model system of a donor-acceptor (D-A) bilayer structure is presented, using ultraviolet photoelectron spectroscopy (UPS), X-ray photoelectron spectroscopy (XPS), low-energy electron diffraction (LEED) and normal-incidence X-ray standing wave (NIXSW) measurements. Pentacene (PEN) as donor and perfluoropentacene (PFP) as acceptor material are chosen to produce bilayer structures on Au(111) and Cu(111) by sequential monolayer deposition of the two materials. By comparing the adsorption behavior of PEN/PFP bilayers on such weakly and strongly interacting substrates, it is found that: (i) the adsorption distance of the first layer (PEN or PFP) indicates physisorption on Au(111), (ii) the characteristics of the bilayer structure on Au(111) are (almost) independent of the deposition sequence, and hence, (iii) in both cases a mixed bilayer is formed on the Au substrate. This is in striking contrast to PFP/PEN bilayers on Cu(111), where strong chemisorption pins PEN molecules to the metal surface and no intermixing is induced by subsequent PFP deposition. The results illustrate the strong tendency of PEN and PFP molecules to mix, which has important implications for the fabrication of PEN/PFP heterojunctions.

Tetracene Ultrathin Film Growth on Hydrogen-Passivated Silicon.

Inorganic-organic interfaces are important for enhancing the power conversion efficiency of silicon-based solar cells through singlet exciton fission (SF). We elucidated the structure of the first monolayers of tetracene (Tc), an SF molecule, on hydrogen-passivated Si(111) [H-Si(111)] and hydrogenated amorphous Si (a-Si:H) by combining near-edge X-ray absorption fine structure (NEXAFS) and X-ray photoelectron spectroscopy (XPS) experiments with density functional theory (DFT) calculations. For samples grown at or below substrate temperatures of 265 K, the resulting ultrathin Tc films are dominated by almost upright-standing molecules. The molecular arrangement is very similar to the Tc bulk phase, with only a slightly higher average angle between the conjugated molecular plane normal and the surface normal (α) around 77°. Judging from carbon K-edge X-ray absorption spectra, the orientation of the Tc molecules are almost identical when grown on H-Si(111) and a-Si:H substrates as well as for (sub)mono- to several-monolayer coverages. Annealing to room temperature, however, changes the film structure toward a smaller α of about 63°. A detailed DFT-assisted analysis suggests that this structural transition is correlated with a lower packing density and requires a well-chosen amount of thermal energy. Therefore, we attribute the resulting structure to a distinct monolayer configuration that features less inclined, but still well-ordered molecules. The larger overlap with the substrate wave functions makes this arrangement attractive for an optimized interfacial electron transfer in SF-assisted silicon solar cells.

Sample cartridge with built-in miniature molecule evaporator for in-situ measurement with a photoemission electron microscope.

We present a new sample holder that is compatible with Photoemission Electron Microscopes (PEEMs) and contains a molecule evaporator. With the integrated low cost evaporator, a local and controlled material deposition in clean ultra-high vacuum conditions can be achieved minimizing the contamination of the analysis chamber. Different molecule systems can easily be studied by exchanging the sample holder. This opens up new possibilities for in-situ investigation of thin film growth by means of spectromicroscopy and element-selective imaging at the nanometer scale. As an example of the performances of the setup, we present a study of the hybrid inorganic/organic system (HIOS) consisting of the organic acceptor molecule 2,2'-(perfluoronaphthalene-2,6-diylidene) dimalononitrile (F6TCNNQ) and ZnO, which is of great interest for novel HIOS-based optoelectronic devices. Here, the ZnO surface work function modification by F6TCNNQ adsorption is investigated in-situ in a spatially resolved manner. In addition, we employ PEEM to selectively probe the chemical state of F6TCNNQ molecules in contact with ZnO (in the first monolayer) and those molecules located in multilayers (in 3D islands).

Energy-level alignment at strongly coupled organic-metal interfaces.

Energy-level alignment at organic-metal interfaces plays a crucial role for the performance of organic electronic devices. However, reliable models to predict energetics at strongly coupled interfaces are still lacking. We elucidate contact formation of 1,2,5,6,9,10-coronenehexone (COHON) to the (1 1 1)-surfaces of coinage metals by means of ultraviolet photoelectron spectroscopy, x-ray photoelectron spectroscopy, the x-ray standing wave technique, and density functional theory calculations. While for low COHON thicknesses, the work-functions of the systems vary considerably, for thicker organic films Fermi-level pinning leads to identical work functions of 5.2 eV for all COHON-covered metals irrespective of the pristine substrate work function and the interfacial interaction strength.

Epitaxial Growth of an Organic p-n Heterojunction: C60 on Single-Crystal Pentacene.

Designing molecular p-n heterojunction structures, i.e., electron donor-acceptor contacts, is one of the central challenges for further development of organic electronic devices. In the present study, a well-defined p-n heterojunction of two representative molecular semiconductors, pentacene and C60, formed on the single-crystal surface of pentacene is precisely investigated in terms of its growth behavior and crystallographic structure. C60 assembles into a (111)-oriented face-centered-cubic crystal structure with a specific epitaxial orientation on the (001) surface of the pentacene single crystal. The present experimental findings provide molecular scale insights into the formation mechanisms of the organic p-n heterojunction through an accurate structural analysis of the single-crystalline molecular contact.

Unveiling the Hybrid n-Si/PEDOT:PSS Interface.

We investigated the buried interface between monocrystalline n-type silicon (n-Si) and the highly conductive polymer poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) ( PEDOT: PSS), which is successfully applied as a hole selective contact in hybrid solar cells. We show that a post-treatment of the polymer films by immersion in a suitable solvent reduces the layer thickness by removal of excess material. We prove that this post-treatment does not affect the functionality of the hybrid solar cells. Through the thin layer we are probing the chemical structure at the n-Si/ PEDOT: PSS interface with synchrotron-based hard X-ray photoelectron spectroscopy (HAXPES). From the HAXPES data we conclude that the Si substrate of a freshly prepared hybrid solar cell is already oxidized immediately after preparation. Moreover, we show that even when storing the sample in inert gas such as, e.g., nitrogen the n-Si/SiOx/ PEDOT: PSS interface continues to further oxidize. Thus, without further surface treatment, an unstable Si suboxide will always be present at the hybrid interface.

Monolayer Phases of a Dipolar Perylene Derivative on Au(111) and Surface Potential Build-Up in Multilayers.

9-(Bis-p-tert-octylphenyl)-amino-perylene-3,4-dicarboxy anhydride (BOPA-PDCA) is a strongly dipolar molecule representing a group of asymmetrically substituted perylenes that are employed in dye-sensitized solar cells and hold great promise for discotic liquid crystal applications. Thin BOPA-PDCA films with orientated dipole moments can potentially be used to tune the energy-level alignment in electronic devices and store information. To help assessing these prospects, we here elucidate the molecular self-assembly and electronic structure of BOPA-PCDA employing room temperature scanning tunneling microscopy and spectroscopy in combination with ultraviolet and X-ray photoelectron spectroscopies. BOPA-PCDA monolayers on Au(111) exclusively form in-plane antiferroelectric phases. The molecular arrangements, the increase of the average number of molecules per unit cell via ripening, and the rearrangement upon manipulation with the STM tip indicate an influence of the dipole moment on the molecular assembly and the rearrangement. A slightly preferred out-of-plane orientation of the molecules in the multilayer induces a surface potential of 1.2 eV. This resembles the giant surface potential effect that was reported for vacuum-deposited tris(8-hydroxyquinoline)aluminum and deemed applicable for data storage. Notably, the surface potential in the case of BOPA-PDCA can in part be reversibly removed by visible light irradiation.

Tuning the Electronic Structure of Graphene by Molecular Dopants: Impact of the Substrate.

A combination of ultraviolet and X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, and first principle calculations was used to study the electronic structure at the interface between the strong molecular acceptor 1,3,4,5,7,8-hexafluorotetracyano-naphthoquinodimethane (F6TCNNQ) and a graphene layer supported on either a quartz or a copper substrate. We find evidence for fundamentally different charge redistribution mechanisms in the two ternary systems, as a consequence of the insulating versus metallic character of the substrates. While electron transfer occurs exclusively from graphene to F6TCNNQ on the quartz support (p-doping of graphene), the Cu substrate electron reservoir induces an additional electron density flow to graphene decorated with the acceptor monolayer. Remarkably, graphene on Cu is n-doped and remains n-doped upon F6TCNNQ deposition. On both substrates, the work function of graphene increases substantially with a F6TCNNQ monolayer atop, the effect being more pronounced (∼1.3 eV) on Cu compared to quartz (∼1.0 eV) because of the larger electrostatic potential drop associated with the long-distance graphene-mediated Cu-F6TCNNQ electron transfer. We thus provide a means to realize high work function surfaces for both p- and n-type doped graphene.

Seleno groups control the energy-level alignment between conjugated organic molecules and metals.

The charge injection from metallic electrodes into hole transporting layers of organic devices often suffers from deviations from vacuum-level alignment at the interface. Even for weakly interacting cases, Pauli repulsion causes an interface dipole between the metal and conjugated organic molecules (COMs) (so called "push-back" or "cushion" effect), which leads notoriously to an increase of the hole injection barrier. On the other hand, for chalcogenol self assembled monolayers (SAMs) on metal surfaces, chemisorption via the formation of chalcogen-metal bonds is commonly observed. In these cases, the energy-level alignment is governed by chalcogen-derived interface states in the vicinity of the metal Fermi-level. In this work, we present X-ray and ultraviolet photoelectron spectroscopy data that demonstrate that the interfacial energy-level alignment mechanism found for chalcogenol SAMs also applies to seleno-functionalized COMs. This can be exploited to mitigate the push-back effect at metal contacts, notably also when COMs with low ionization energies are employed, permitting exceedingly low hole injection barriers, as shown here for the interfaces of tetraseleno-tetracene with Au(111), Ag(111), and Cu(111).

Space-charge transfer in hybrid inorganic-organic systems.

We discuss density functional theory calculations of hybrid inorganic-organic systems that explicitly include the global effects of doping (i.e., position of the Fermi level) and the formation of a space-charge layer. For the example of tetrafluoro-tetracyanoquinodimethane on the ZnO(0001[over ¯]) surface we show that the adsorption energy and electron transfer depend strongly on the ZnO doping. The associated work function changes are large, for which the formation of space-charge layers is the main driving force. The prominent doping effects are expected to be quite general for charge-transfer interfaces in hybrid inorganic-organic systems and important for device design.

Pentacene on Ag(111): correlation of bonding distance with intermolecular interaction and order.

We report coverage and temperature dependent bonding distances of vacuum-sublimed pentacene (PEN) submonolayers on Ag(111) obtained by the X-ray standing wave technique. The average vertical bonding distance of 2.98 Å at room temperature for 0.50 monolayer (ML) coverage increases to 3.12 Å for 0.75 ML due to competing intermolecular and adsorbate-substrate interactions. In contrast, decreasing the temperature from 295 to 145 K does not impact the bonding distance despite the concomitant transition from a "liquidlike" to an ordered molecular arrangement. In combination with X-ray photoelectron spectroscopy results, we could identify "soft chemisorption" with a subtle balance of molecule-molecule and substrate-molecule interactions as being responsible for this special adsorption behavior. Thus our study sheds light not only on the interface between PEN and Ag(111), but also on fundamental adsorption processes of organic adsorbates on metals in the context of chemi- and physisorption.