Energy transfer between fluorescent proteins using a co-expression system in Mycobacterium smegmatis.

The goal of this study was to establish a two-plasmid co-expression system for Mycobacterium smegmatis. Two vectors with compatible origins of replication and a polylinker, which allows modular cloning of promoters and genes, were constructed and used to clone genes encoding a blue fluorescent protein (BFP) and a green fluorescent protein (GFP). A 160-fold variation of GFP expression levels in M. smegmatis was achieved by combining three promoters with different copy numbers of the vectors. An efficient energy transfer between BFP and GFP in M. smegmatis was observed by fluorescence measurements and demonstrated that these genes were simultaneously expressed from both vectors. Thus, these vectors will be valuable for all strategies where co-expression of proteins in M. smegmatis is needed, e.g. for constructing a two-hybrid system or for deleting essential genes.

Characterization of four members of a multigene family encoding outer membrane proteins of Helicobacter pylori and their potential for vaccination.

In search of protective antigens which can be used in a vaccine to prevent Helicobacter pylori infection, we report on the identification of four genes, hopV, hopW, hopX and hopY, and the characterization of the corresponding proteins which belong to the H. pylori outer membrane protein (Hop) family containing 32 homologous members, some of which were shown to function as porins. Sequence analysis of 16 different H. pylori strains revealed that the proteins HopV, HopW, HopX and HopY are highly conserved. Localization of HopV, HopW, HopX and HopY at the surface of the bacteria was investigated by immunofluorescence. Using a planar lipid bilayer system the proteins HopV and HopX were shown to form pores with single-channel conductances of 1.4 and 3.0 nS, respectively.

MspA provides the main hydrophilic pathway through the cell wall of Mycobacterium smegmatis.

MspA is an extremely stable, oligomeric porin from Mycobacterium smegmatis that forms water-filled channels in vitro. Immunogold electron microscopy and an enzyme-linked immunosorbent assay demonstrated that MspA is localized in the cell wall. An mspA deletion mutant did not synthesize detectable amounts of mspA mRNA, as revealed by amplification using mspA-specific primers and reverse-transcribed RNA. Detergent extracts of the DeltamspA mutant exhibited a significantly lower porin activity in lipid bilayer experiments and contained about fourfold less porin than extracts of wild-type M. smegmatis. The chromosome of M. smegmatis encodes three proteins very similar to MspA. Sequence analysis of the purified porin revealed that mspB or mspC or both genes are expressed in the DeltamspA mutant. The properties of this porin, such as single channel conductance, extreme stability against denaturation, molecular mass and composition of 20 kDa subunits, are identical to those of MspA. Deletion of mspA reduced the cell wall permeability towards cephaloridine and glucose nine- and fourfold respectively. These results show that MspA is the main general diffusion pathway for hydrophilic molecules in M. smegmatis and was only partially replaced by fewer porins in the cell wall of the DeltamspA mutant [corrected] This is the first experimental evidence that porins are the major determinants of the exceptionally low permeability of mycobacteria to hydrophilic molecules.

Modular organization of the AIDA autotransporter translocator: the N-terminal beta1-domain is surface-exposed and stabilizes the transmembrane beta2-domain.

The adhesin involved in diffuse adherence (AIDA-I) of the diarrhoeagenic Escherichia coli strain 2787 (O126:H27) is synthesized as a precursor molecule. This pre-pro-protein is N- and C-terminally processed to generate three distinct domains, which are characteristic for autotransporter secretion systems in Gram-negative bacteria: the N-terminal pre-peptide, the alpha-domain and the C-terminal beta-domain. The outer membrane-integrated beta-domain (AIDAC) is responsible for the surface-presentation of the alpha-domain (AIDA-I) and is thus termed 'translocator'. Characterization of extracted N-terminally truncated forms and of in vitro refolded proteins revealed a core structure at the C-terminus of the translocator which was found to be very stable even in the presence of SDS. Denaturation occurs only after additional incubation at temperatures above 80 degrees C. Reporter-epitope insertions were used to analyze the location of regions of membrane-integrated AIDAC relative to the membrane. The modified topological model developed for the AIDA translocator suggests the N-terminal domain (beta1) encompasses approximately 10 kDa to represent a completely surface-exposed segment while the C-terminal compact core domain (beta2) remains integrated in the membrane as a beta-barrel-like structure. Though the beta2-core structure alone harbours all the information for the outer membrane integration of AIDAC it is additionally stabilized by the beta1-domain. Access to large amounts of complete as well as truncated AIDAC proteins facilitated the study of protein folding by CD and fluorescence spectroscopy. A potential pore forming activity of the translocator using the completely refolded AIDAC or the beta2-core in black-lipid membranes could not be demonstrated.

Selective extraction and purification of a mycobacterial outer membrane protein.

MspA forms water-filled channels in the mycolic acid layer of Mycobacterium smegmatis thereby allowing the diffusion of hydrophilic solutes through this permeability barrier into the periplasm. MspA is the first member of a new family of porins and is extremely stable against chemical and thermal denaturation. We developed a purification procedure based on selective extraction of MspA with detergents from whole cells of M. smegmatis at high temperatures. Anion-exchange and size-exclusion chromatography yielded about 230 microg apparently pure and highly active MspA per liter of culture. This was a 20-fold increased yield compared to previous purification protocols. Similar amounts of pure MspA were obtained with the detergents isotridecylpolyethyleneglycolether, lauryldimethylamine oxide, and octylpolyethylene oxide indicating that this purification procedure is not restricted to a specific detergent. This study will promote the structural and functional analysis of MspA and might be valuable for the isolation of porins from other mycolic acid-containing bacteria.

The FtsH protein accumulates at the septum of Bacillus subtilis during cell division and sporulation.

The ftsH gene encodes an ATP- and Zn(2+)-dependent metalloprotease which is anchored to the cytoplasmic membrane via two transmembrane segments in such a way that the very short amino- and the long carboxy termini are exposed to the cytoplasm. Deletion of the ftsH gene in Bacillus subtilis results in a pleiotropic phenotype such as filamentous growth. This observation prompted us to ask whether ftsH is involved in cell division. A translational fusion was constructed between the complete coding region of ftsH and gfp(+) the latter carrying five point mutations to obtain enhanced fluorescence. We detected that the FtsH protein accumulates in the midcell septum of dividing cells, and during sporulation first in the asymmetrically located septa of sporulating cells and later in the membrane which engulfs the forespore. These observations revealed a new function of FtsH.

Quantitative analysis of gene expression with an improved green fluorescent protein. p6.

The fast and easy in vivo detection predestines the green fluorescent protein (GFP) for its use as a reporter to quantify promoter activities. We have increased the sensitivity of GFP detection 320-fold compared to the wild-type by constructing gfp+, which contains mutations improving the folding efficiency and the fluorescence yield of GFP+. Twelve expression levels were measured using fusions of the gfp+ and lacZ genes with the tetA promoter in Escherichia coli. The agreement of GFP+ fluorescence with beta-galactosidase activities was excellent, demonstrating that the gfp+ gene can be used to accurately quantify gene expression in vivo. However, expression of the gfp+ gene from the stronger hsp60 promoter revealed that high cellular concentrations of GFP+ caused an inner filter effect reducing the fluorescence by 50%, thus underestimating promoter activity. This effect is probably due to the higher absorbance of cells containing GFP+. Thus promoters with activities differing by about two orders of magnitude can be correctly quantified using the gfp+ gene. Possibilities of using GFP variants beyond this range are discussed.

Permeation of tetracyclines through membranes of liposomes and Escherichia coli.

Uptake of tetracycline (tc), 2-tetracyclinonitrile (CN-tc), and 9-(N, N-dimethylglycylamido)-6-demethyl-6-deoxytetracycline (DMG-DMDOT) by liposomes containing Tet repressor (TetR) and by Escherichia coli cells overexpressing TetR was examined. TetR specifically binds to tetracyclines, enhances their fluorescence and thereby allows selective detection of tetracyclines that have crossed the membranes. Analysis of the diffusion of tc and DMG-DMDOT into liposomes yielded permeation coefficients of (2.4 +/- 0.6) x 10-9 cm.s-1 and (3.3 +/- 0.8) x 10-9 cm.s-1, respectively. Similar coefficients were obtained for uptake of these tetracyclines by E. coli, indicating that diffusion through the cytoplasmic membrane is the rate-limiting step. The permeation coefficients translate into half-equilibration times of approximately 35 +/- 15 min and explain how efflux pumps can mediate resistance against tetracyclines. Furthermore, diffusion of CN-tc into liposomes was at least 400-fold slower than that of tc, indicating that the carboxamide group at position C2 is required for efficient permeation of tc through lipid membranes and thereby explaining the lack of antibiotic activity of CN-tc.

Porins in the cell wall of Mycobacterium tuberculosis.

Lipid bilayer experiments indicated that the cell wall of Mycobacterium tuberculosis contains at least two different porins: (i) a cation-selective, heat-sensitive 0.7-nS channel which has a short-lived open state and is probably composed of 15-kDa subunits and (ii) a 3-nS, >60-kDa channel with a long-lived open state, resembling porins from fast-growing mycobacteria.

Cloning of the mspA gene encoding a porin from Mycobacterium smegmatis.

Porins form channels in the mycolic acid layer of mycobacteria and thereby control access of hydrophilic molecules to the cell. We purified a 100 kDa protein from Mycobacterium smegmatis and demonstrated its channel-forming activity by reconstitution in planar lipid bilayers. The mspA gene encodes a mature protein of 184 amino acids and an N-terminal signal sequence. MALDI mass spectrometry of the purified porin revealed a mass of 19 406 Da, in agreement with the predicted mass of mature MspA. Dissociation of the porin by boiling in 80% dimethyl sulphoxide yielded the MspA monomer, which did not form channels any more. Escherichia coli cells expressing the mspA gene produced the MspA monomer and a 100 kDa protein, which had the same channel-forming activity as whole-cell extracts of M. smegmatis with organic solvents. These proteins were specifically detected by a polyclonal antiserum that was raised to purified MspA of M. smegmatis. These results demonstrate that the mspA gene encodes a protein of M. smegmatis, which assembles to an extremely stable oligomer with high channel-forming activity. Database searches did not reveal significant similarities to any other known protein. Southern blots showed that the chromosomes of fast-growing mycobacterial species contain homologous sequences to mspA, whereas no hybridization could be detected with DNA from slow growing mycobacteria. These results suggest that MspA is the prototype of a new class of channel-forming proteins.

Biochemical and biophysical characterization of the cell wall porin of Corynebacterium glutamicum: the channel is formed by a low molecular mass polypeptide.

The cell wall of the Gram-positive bacterium Corynebacterium glutamicum contains a channel (porin) for the passage of hydrophilic solutes. The channel-forming protein was identified, by lipid bilayer experiments, in the cell envelope fractions isolated by sucrose-density centrifugations and in organic solvent of whole cells. It was purified to homogeneity by fast-protein liquid chromatography across a Mono-Q column. The pure protein had a rather low molecular mass of about 5 kDa as judged by SDS-PAGE, which suggested that the cell wall channel is formed by a protein oligomer. The monomer has according to partial sequencing no significant homology to known protein sequences. The purified protein formed large ion-permeable channels in lipid bilayer membranes from phosphatidylcholine/phosphatidylserine mixtures with a single-channel conductance of 5.5 nS in 1 M KCl. Experiments with different salts suggested that the cell wall channel of C. glutamicum was highly cation-selective caused by negative charges localized at the channel mouth. The analysis of the single-channel conductance data using the Renkin correction factor suggested that the diameter of the cell wall channel is about 2.2 nm. Channel-forming properties of the cell wall channel of C. glutamicum were compared with those of mycobacteria. These channels share common features because they form large and water-filled channels that contain point net charges.

Identification of channel-forming activity in the cell wall of Corynebacterium glutamicum.

The cell wall of the gram-positive Corynebacterium glutamicum was prepared. It contained an ion-permeable channel with a single-channel conductance of about 6 nS in 1 M KCl. The mobility sequence of the ions in the channel is similar to that in the aqueous phase, suggesting that it is a water-filled channel wide enough to allow unhindered diffusion of ions. The results indicate that we have identified the hydrophilic pathway through the mycolic acid layer of C. glutamicum.

Oligo[d(C).(G)] runs exhibit a helical repeat of 11.1 bp in solution and cause slight DNA curvature when properly phased.

We have inserted d(C)10 in a set of DNA fragments with bent segments on both ends, which are rotated with respect to each other by base pair wise increasing insertions. The electrophoretic mobilities on polyacrylamide gels of these DNA fragments were used to identify insertion sizes with cis conformations of the bent ends. These experiments revealed a helical repeat in solution of d(C).d(G) tracts of 11.1 +/- 0.08 bp. The electrophoretic mobilities of ligation ladders with properly phased d(C)5 and d(C)16 runs demonstrate a small but clearly detectable curvature of these fragments.

Matrix effects suggest an important influence of DNA-polyacrylamide interactions on the electrophoretic mobility of DNA.

The electrophoretic mobilities of 34 DNA fragments with a varied phasing of two A-tract bends have been determined in different polyacrylamide gels. They are perfectly described by a cosine function. A systematic variation of the polyacrylamide gel matrix revealed that not only the absolute electrophoretic mobilities of these distance variants, but also their amplitudes and the positions of their extrema, depend on the polyacrylamide content. The displacement of the extrema with increasing polyacrylamide content is attributed to gel-induced unwinding of the DNA. None of these matrix effects can be explained by the change of the pore sizes, which is generally regarded as the central parameter determining electrophoretic mobility of DNA in gels. Instead, we hypothesize an interaction between the electrophoresed DNA and the polyacrylamide matrix and discuss a new qualitative model for electrophoresis of DNA in polyacrylamide gels which accounts for these observations.

Electrophoretic analysis of protein-induced DNA bending and twist changes.

DNA fragments with a varied phasing of two intrinsic bends at their ends and a tet operator in-between were constructed to determine Tet repressor-induced twist changes in the operator DNA. These distance variants show a sinusoidal dependence of their electrophoretic mobilities on the phasing of their bends in polyacrylamide gels. Complex formation with Tet repressor leads to a displacement of the first minimum, indicating an unwinding of the tet operator DNA. Model calculations were performed to assess the contribution of Tet repressor-induced DNA bending to this result. They revealed that the amplitude of the electrophoretic mobilities of the distance variants may be used as a parameter to separate the effects of Tet repressor-induced twist change and bending. The systematic analysis presented here may help to improve the quantitative interpretation of gel shifts and promote the use of this highly sensitive method to gain structural information about protein-DNA complexes.

An accurate method for determining the helical repeat of DNA in solution reveals differences to the crystal structures of two B-DNA decamers.

Many DNA sequences have been studied by X-ray crystallography with the goal of deciphering a sequence-structure code. We have determined the helical repeats of two B-type DNA decamers in solution employing an electrophoretic method based on phasing of bent segments. The decamers contain recognition sites for the dcm methyltransferase and for the restriction nuclease NarI with a mutational hotspot. Their helical repeats are 10.59(+/- 0.05) bp and 10.52(+/- 0.03) bp, respectively, whereas crystallographic analysis yielded 10.0 bp in the solid state. This difference is greater than that for the transition between B- and A-type DNA in solution. Thus, reliable information about the polymorphism of DNA in solution must be based on both X-ray and solution data. We describe a generally applicable approach to accurately determine helical repeats of small DNA duplexes in solution.