[Risk analysis Erosive Tooth Wear (ETW): checklist for a quick assessment of the risk factors for ETW in the dental practice]. / Risikoanalyse Erosive Tooth Wear (ETW): Checkliste zur schnellen Bewertung der Risikofaktoren für ETW in der Zahnarztpraxis.

Erosive Tooth Wear (ETW) is the loss of tooth structure without bacterial involvement. As the resulting loss of tooth structure is irreversible, an early evaluation of the multifactorial etiology, accurate diagnosis and regular follow-up are essential. The ETW is dynamic and its progression should be continuously monitored. A risk analysis table was developed to systematically record risk factors for ETW (Fig. 2). This allows ETW management to be integrated more efficiently into clinical practice and the progression to be documented over the years. If ETW is assumed, the risk analysis should be performed and updated at least every two years. In the assessment, risk-promoting and risk-inhibiting factors are marked, added together and compared. If the negative factors pre-dominate, measures should be taken to minimize the risk for ETW. The main purpose of the risk analysis is therefore to evaluate the individual etiology, coun-teract negative factors, promote positive factors and prevent progression.

Decision making and management of root caries: A practice-based survey.

OBJECTIVES: With increasing life expectancy and improved preventive measures, teeth are retained longer, leading to a rise in prevalence of root caries lesions (RCL). However, little is known about how dentists manage this condition. The present survey aimed to evaluate the knowledge of Swiss dentists on decision making and management of RCL. METHOD: The survey evaluated dentists' knowledge, clinical routines, and demographics concerning RCL. Dentists were contacted via email and local newsletters, and 383 dentists from 25 (out of 26) cantons responded. Mann-Whitney U test, χ2 test, intraclass correlation coefficients, Spearman correlation and Chi Square were used. RESULTS: The dentists had a mean(SD) working experience of 22.5(12) years. Most dentists correctly classified an inactive (67%) and an active (81%)RCL. Although the inactive lesion did not call for restorative treatments, 61% of the dentist declared they would restore it. From the active lesion,83% would restore it. The invasive treatments leaned toward complete caries excavation with composite resin as preferred restorative material. There were significant correlations between material choice and expected success rates. Among the non-invasive options, oral hygiene instructions and (highly-)fluoridated toothpaste were favored. Most dentists declared having a recall system for such patients, with biannual follow-ups preferred. The dentists' place of education significantly influenced restorative decisions (p < 0.001), while participants' age (≥60years) impacted activity status (p = 0.048) and restorative decisions (p = 0.02). CONCLUSION: Material preferences for non-invasive or invasive management varied greatly and there were minimal differences in the management of inactive or an active RCL. Moreover, diagnosing active lesions appeared easier than diagnosing inactive ones. CLINICAL SIGNIFICANCE: Despite diverse material preferences for (non-)invasive treatments, a strong positive correlation existed between the chosen restorative material and its expected 2-year success rate. Moreover, diagnosing active lesions appeared easier than diagnosing inactive ones. The outcome emphasis the need to align guideline recommendations with their application in private dental practices.

Diagnosing and recording root caries: A survey among Swiss dentists.

OBJECTIVES: Despite the increase in the root caries prevalence, little is still known about how dentists manage this condition. The present study aimed to evaluate the knowledge of dentists on diagnosing and recording root caries lesions (RCL). METHODS: The survey consisted of three domains: (1) dentists' knowledge on diagnosing, recording and managing RCL; (2) information about their current general clinical routines; and (3) their demographics. The four Swiss Universities distributed the survey via e-mail lists for alumni or professionals participating in continuing education. The data was quality checked. Construct validity, internal reliability and intraclass correlation (ICC) were assessed. RESULTS: The survey was answered by 383 dentists from 25(out of 26) cantons [mean(SD) working experience: 22.5(12) years]. The majority replied that they see less than 5 patients with RCL per week, whereas 41 have at least 5 per week, and 40 % (157 dentists) do not distinguish RCL from coronal caries in their patients' medical records. When diagnosing active RCL, tactile sensation was the most predominant criterion (n = 380), whereas color (n = 224) and visual appearance (n = 129) of the lesion were less often selected. The most often chosen risk factors for RCL were poor oral hygiene and presence of biofilm.The responses were significantly influenced by the participants' place of education, their age and working area. CONCLUSION: The present survey highlights the huge diversity in diagnosing, recording and assessing risk factors of RCL. The benefits of an appropriate diagnosis, recording and management of risk factors of RCL should be highlighted in under- and postgraduate dental education. CLINICAL SIGNIFICANCE: A great diversity in diagnosing, recording and assessing risk factors of RCL was observed, which migh strongly impact how dentists manage RCL. The study emphasizes the necessity for intensive efforts to bridge the gap between guideline recommendations and their implementation in private dental practices.

Characteristics of tin-containing fluoride toothpastes related to erosive tooth wear protection.

OBJECTIVES: To assess the effect of different tin-containing toothpastes on the control of erosive tooth wear in enamel and dentin. METHODS: Enamel and dentin slabs were randomly distributed into 7 experimental groups (n = 10/substrate): C-: negative control (Artificial saliva); AmF (regular fluoridated toothpaste without tin); Sn-1 (SnF2/NaF); Sn-2 (SnF2/NaF/SnCl2); Sn-3 (SnCl2/NaF); Sn-4 (SnF2/SnCl2); Sn-5 (SnCl2/AmF/NaF/chitosan). Specimens were submitted to 5-day erosion-abrasion cycling. Surface loss (SL) was determined with an optical profilometer. Tin deposition on the tooth surfaces and some characteristics of the toothpastes (pH, potentially available F-, %weight of solid particles, and RDA) were also assessed. Data were statistically analyzed (α = 0.05). RESULTS: For enamel, the Sn-2 presented the lowest SL, not differing significantly from AmF, C+, and Sn-3. The SL of these groups was significantly lower than the C-, except for Sn-3. Sn-1 and Sn-4 were also not significantly different from C-. For dentin, C- significantly showed the highest SL values, whilst, Sn-1 presented the lowest SL, not differing significantly from AmF, Sn-2, C+, and Sn-3. There was a significant positive association between enamel SL and the pH and tin deposition. Dentin SL was significantly negatively associated with the %weight of solid particles and RDA. CONCLUSIONS: Most of the tin-toothpastes were able to exhibit some protection against ETW. In this process, the toothpastes characteristics play a role, as lower enamel SL was significantly associated with lower pH values and tin deposition; and lower dentin SL was associated with higher %weight of solid particles and RDA of the toothpastes. CLINICAL SIGNIFICANCE: Tin-containing toothpastes can be used for erosive tooth wear protection, but our study showed that their effect depends on the pH, amount of tin deposition, % weight of solid particles and RDA of the toohpastes.

Film-Forming Polymers for Inhibition of Hydroxyapatite Dissolution: A Screening Study.

The aim of this study was to evaluate the effect of film-forming polymer solutions of different concentrations and pH values, either associated or not with sodium fluoride (F; 225 ppm F-), when applied during the initial stage of salivary pellicle formation, to prevent the dissolution of hydroxyapatite (HA), which was determined by the pH-stat method. Polyacrylic acid (PA), chitosan, sodium linear polyphosphate (LPP), polyvinyl methyl ether/maleic anhydride (PVM/MA), and propylene glycol alginate (PGA) were tested in three concentrations (lower, medium, and higher), two pH values (native or adjusted), and either associated or not with F. Distilled water, F, and stannous ion+fluoride (Sn/F; 225 ppm F- and 800 ppm Sn2+, as SnCl2) solutions were the controls, totalizing 63 groups. HA crystals were pretreated with human saliva for 1 min to allow pellicle formation, then immersed in the experimental solutions (1 min), and exposed to saliva for another 28 min. Subsequently, they were added to a 0.3% citric acid solution (pH = 3.8), connected to a pH-stat system that added aliquots of 28 µL 0.1 N HCl for a total reaction time of 5 min. Data were analyzed with one-way ANOVA and Tukey's tests (α = 0.05). For PA alone, the concentrations of 0.1% (native pH), 0.06%, and 0.08% (both pH adjusted) showed significantly lower HA dissolution than the negative control. PA concentrations of 0.1% and 0.08%, of both pH values, improved the effect of F against HA dissolution to a near-identical value as Sn/F. All solutions containing chitosan and LPP significantly reduced HA dissolution in comparison with the control. For chitosan, the concentration of 0.5% (in both pH values) improved the effect of F. LPP at 0.5% (native pH) and all associations of LPP with F outperformed the effect of F. Some PVM/MA solutions significantly reduced HA dissolution but PVM/MA could not improve the protection of F. PGA was incapable of reducing HA dissolution or improving F effect. It was concluded that chitosan, LPP, and some PA and PVM/MA solutions used alone were capable of reducing HA dissolution. Only PA, chitosan, and LPP were able to enhance fluoride protection, but for PA and chitosan, this was influenced by the polymer concentration.

Rinsing solutions containing natural extracts and fluoride prevent enamel erosion in vitro.

BACKGROUND: Polyphenols interact with salivary proteins and thus can improve the pellicle's erosion protective properties. This effect could be exploited to create rinsing solutions with polyphenols as active ingredients for erosion prevention. Different from the current gold standard for erosion protective rinsing solutions, these rinses would not rely on stannous ions. This would offer alternatives for patients with concerns regarding the composition of rinsing solutions and preferring bio-products. OBJECTIVE: To develop an erosion-preventive rinsing solution containing natural polyphenol-rich extracts. METHODOLOGY: Solutions were prepared with polyphenols from either grapeseed extract or cranberry extract, 500 ppm fluoride added, and additionally flavors and sweeteners. Controls were deionized water, 500 ppm fluoride solution, and the gold standard rinse in the field (Sn2+/F-). In total, 135 enamel specimens (n=15/group) were subjected to five cycles of salivary pellicle formation (30 min, 37°C), modification with the solutions (2 min, 25°C), further salivary pellicle formation (60 min, 37°C), and erosive challenge (1 min, 1% citric acid, pH 3.6). Relative surface microhardness (rSMH), surface reflection intensity (rSRI), and amount of calcium release (CaR) were investigated. Data were analyzed with Kruskal-Wallis and Wilcoxon rank sum tests (α=0.05). RESULTS: The polyphenol solutions containing fluoride, as well as additional flavors, protected enamel better than fluoride alone, and similar to the Sn2+/F- solution, when investigating both rSMH and CaR. When measuring rSRI, Sn2+/F- showed the best protection, while the polyphenol solutions were similar to fluoride. CONCLUSION: For two of the three assessed parameters (rSMH and CaR), both developed polyphenol-rich rinsing solutions were able to protect enamel from erosion, improving/potentializing the effect of fluoride and matching the protection offered by the current gold standard rinsing solution.

Plant extracts have dual mechanism on the protection against dentine erosion: action on the dentine substrate and modification of the salivary pellicle.

To investigate the effect of some polyphenol-rich plant extracts on the protection of dentine against demineralization, both acting on the dentine and on the salivary pellicle. Dentine specimens (n = 180) were randomly distributed into 6 experimental groups (n = 30/group): Control (deionized water), Açaí extract, Blueberry extract, Green tea extract, Grape seed extract, and Sn2+/F- (mouthrinse containing stannous and fluoride). Each group was further divided into two subgroups (n = 15), according to the site of action of the substance: on the dentine surface (D) or on the salivary pellicle (P). The specimens were submitted to 10 cycles: 30 min incubation in human saliva (P) or only in humid chamber (D), 2 min immersion in experimental substances, 60 min of incubation in saliva (P) or not (D), and 1 min erosive challenge. Dentine surface loss (DSL), amount of degraded collagen (dColl) and total calcium release were analyzed. Green tea, Grape seed and Sn2+/F- showed significant protection, with least DSL and dColl. The Sn2+/F- showed better protection on D than on P, whereas Green tea and Grape seed showed a dual mode of action, with good results on D, and even better on P. Sn2+/F- showed the lowest values of calcium release, not differing only from Grape seed. Sn2+/F- is more effective when acting directly on the dentine surface, while Green tea and Grape seed have a dual mode of action: with a positive effect on the dentine surface itself, but an improved efficacy in the presence of the salivary pellicle. We further elucidate the mechanism of action of different active ingredients on dentine erosion, where Sn2+/F- acts better on the dentine surface, but plant extracts have a dual mode of action, acting on the dentine itself as well as on the salivary pellicle, improving the protection against acid demineralization.

Dual protective effect of the association of plant extracts and fluoride against dentine erosion: In the presence and absence of salivary pellicle.

OBJECTIVES: To verify the protective effect of plant extracts associated with fluoride against dental erosion of dentine, in the presence and absence of a salivary pellicle. METHODS: Dentine specimens (n = 270) were randomly distributed into 9 experimental groups (n = 30/group): GT (green tea extract); BE (blueberry extract); GSE (grape seed extract); NaF (sodium fluoride); GT+NaF (green tea extract and NaF); BE+NaF (blueberry extract and NaF); GSE+NaF (grape seed extract and NaF); negative control (deionized water); and a positive control (commercialized mouthrinse containing stannous and fluoride). Each group was further divided into two subgroups (n = 15), according to the presence (P) or absence (NP) of salivary pellicle. The specimens were submitted to 10 cycles: 30 min incubation in human saliva (P) or only in humid chamber (NP), 2 min immersion in experimental solutions, 60 min of incubation in saliva (P) or not (NP), and 1 min erosive challenge. Dentine surface loss (dSL-10 and dSL-total), amount of degraded collagen (dColl) and total calcium release (CaR) were evaluated. Data were analyzed with Kruskal-Wallis, Dunn's and Mann-Whitney U tests (p>0.05). RESULTS: Overall, the negative control presented the highest values of dSL, dColl and CaR, and the plant extracts showed different degrees of dentine protection. For the subgroup NP, GSE showed the best protection of the extracts, and the presence of fluoride generally further improved the protection for all extracts. For the subgroup P, only BE provided protection, while the presence of fluoride had no impact on dSL and dColl, but lowered CaR. The protection of the positive control was more evident on CaR than on dColl. CONCLUSION: We can conclude that the plant extracts showed a protective effect against dentine erosion, regardless of the presence of salivary pellicle, and that the fluoride seems to improve their protection.

Protease-inhibitors added to saliva in vitro influence the erosion protective effect of enamel pellicles.

In contrast to pellicles formed in vivo, pellicles formed in vitro provide little to no erosion protection for enamel, possibly due to protein degradation from proteases during pellicle formation. With the objective to achieve a more similar effect as observed for in vivo pellicles, the effects of adding protease inhibitors (PI) to saliva in vitro, and/or exchanging saliva repeatedly during pellicle formation were investigated in a cyclic model of pellicle formation and erosion with human enamel specimens. We repeatedly assessed surface microhardness (SMH), measured initial and final surface reflection intensity (SRI), and determined calcium released during erosion. For all the parameters tested, we observed a clear positive effect on erosion protection when adding PI to saliva for pellicle formation: SMH remained harder, SRI remained higher, and less calcium was released. Additionally, exchanging saliva with fresh one during pellicle formation led to a protective effect, but not as strong as the addition of PI. We conclude that adding protease inhibitors to saliva in vitro for pellicle formation leads to an erosion protective effect, which was further increased by repeatedly exchanging the saliva. Whether the pellicle itself more closely resembles in vivo pellicles remains to be investigated.

Impact of different brushing/abrasion protocols on erosive tooth wear for in vitro studies.

OBJECTIVE: To investigate the influence of different toothbrushing (with dentifrice) protocols on the progression of erosive tooth wear for in vitro studies. DESIGN: Bovine enamel specimens were randomly distributed into 12 experimental groups (n = 10), according to the study factors: (1) brushing movement (horizontal or circular); (2) slurry diluent (artificial saliva or distilled water); (3) toothpaste dilution ratio (1:2, 1:3 or 1:4). A 5-day erosion-abrasion cycling model was performed, each consisting of 4 erosive challenges (0.3 % citric acid, pH=2.6) followed by 60 min exposure to artificial saliva. Brushing with fluoride toothpaste (15 s, 1400 ppm F-, AmF) was carried out 2x/day. Enamel surface loss (SL) was determined by optical profilometry. Data were statistically analyzed with three-way ANOVA and Tukey tests (α = 0.05). RESULTS: SL was lower for the horizontal movement than for the circular (p = 0.044). There were no significant differences among the dilution ratios for artificial saliva. For distilled water, the more concentrated slurry (1:2) presented greater surface loss than the less concentrated slurries (1:3 and 1:4, p = 0.049 and p = 0.014, respectively). Dilutions with artificial saliva at ratios 1:3 and 1:4 presented higher surface loss than with distilled water (p = 0.008 and p < 0.001, respectively); however, for 1:2 ratio, there were no significant differences between the diluents. CONCLUSIONS: The in vitro progression of enamel SL was influenced by the brushing movement, as well as the combination of the dilution ratio and the diluent of the toothpaste slurry, and therefore, all these factors must be considered when comparing results from different studies.

New insights into the protective effect of statherin-derived peptide for different acquired enamel pellicle formation times on the native human enamel surfaces.

OBJECTIVES: This study evaluated the protective impact of acquired enamel pellicle (AEP) engineering with statherin-derived peptide (StatpSpS), considering different AEP formation times. DESIGN: A total of 120 native human enamel specimens were divided into 2 main groups: 1) No AEP engineering and 2) AEP engineering with StatpSpS (pretreatment for 1 min; 37 °C, under agitation). Each group was further divided into 4 subgroups: No pellicle, or 1, 60-and-120 min AEP formation times (human saliva; 37 °C). The specimens were then subjected to an erosive challenge (1% citric acid; pH 3.6; 1 min; 25 °C). This procedure was repeated for 5 cycles. Relative surface reflection intensity (%SRI) was measured and scanning electron microscopy (SEM) of the enamel surface was done. RESULTS: All AEP engineering groups protected against initial dental erosion in comparison with No pellicle (p < 0.001), likewise all groups with AEP, independent of engineering or formation times (p 0.001). Furthermore, engineering with StatpSpS even without the presence of AEP protected the enamel when compared to the No engineering/No pellicle group (p < 0.0001). No difference was observed regarding the protection from the different AEP formation times (p > 0.05). Regarding the SEM analysis, in the "No AEP engineering & No AEP" group, a more severe effect of citric acid was observed, with more enamel prism heads and scratches on the surface when compared with the other groups. CONCLUSIONS: AEP provides almost instant protection at formation times even as short as 1 min, protecting the native enamel against erosion. Treatment with StatpSpS by itself provides similar protection as the AEP.

Design, development and validation of a questionnaire to assess dentists' knowledge and experience in diagnosing, recording, and managing root caries.

OBJECTIVES: The prevalence of root caries is increasing globally, especially in the elderly population, and even though the number of patients with root caries lesions is augmenting, there are still many discrepancies in how dentists manage this condition. The present study aimed to develop and validate a questionnaire to evaluate how dentists diagnose, record and manage root caries lesions, and to verify the validity and reliability of this questionnaire. MATERIALS AND METHODS: An expert panel developed a self-administered questionnaire survey with three domains: (1) dentists' knowledge on diagnosis, recording, and managing root caries; (2) information about their current general clinical routines; (3) their demographics. The original English [E] version was translated into three different languages (French [F], German [G], Italian [I]), and subsequently back-translated into English by independent dentists. For the validation, 82 dentists (20-22 for each of the translated versions) accepted to answer the questionnaire at two different time-points (with 1-week interval). The data was quality checked. Construct validity, internal reliability, and intra-class correlation (ICC) were assessed. RESULTS: Seventy-seven dentists completed the questionnaire twice [E: 17; F: 19; G: 19; I: 22]. The mean ICC (standard deviation) was 0.98(0.03) for E, 0.90(0.12) for F, 0.98 (0.04) for G, and 0.98 (0.01) for I. Overall, the test-retest reliability was excellent (mean ICC (SD): 0.96 (0.08)). Furthermore, the questionnaire demonstrated good internal reliability (inter-observer reliability; Fleiss kappa: overall:0.27(fair); E:0.30 (fair); F: 0.33(fair); G: 0.33(fair); I: 0.89 (almost perfect)). CONCLUSION: The questionnaire was validated and is suitable to be used in the four languages to assess the knowledge of dentists on diagnosing, recording and managing root caries. CLINICAL SIGNIFICANCE: The present questionnaire was validated and seems to be a good tool to evaluate how dentists diagnose, record, and manage root caries lesions both in its original (English) and its translated (French, German, and Italian) versions.

Rinsing solutions containing natural extracts and fluoride prevent enamel erosion in vitro

Abstract Polyphenols interact with salivary proteins and thus can improve the pellicle's erosion protective properties. This effect could be exploited to create rinsing solutions with polyphenols as active ingredients for erosion prevention. Different from the current gold standard for erosion protective rinsing solutions, these rinses would not rely on stannous ions. This would offer alternatives for patients with concerns regarding the composition of rinsing solutions and preferring bio-products. Objective To develop an erosion-preventive rinsing solution containing natural polyphenol-rich extracts. Methodology Solutions were prepared with polyphenols from either grapeseed extract or cranberry extract, 500 ppm fluoride added, and additionally flavors and sweeteners. Controls were deionized water, 500 ppm fluoride solution, and the gold standard rinse in the field (Sn2+/F-). In total, 135 enamel specimens (n=15/group) were subjected to five cycles of salivary pellicle formation (30 min, 37°C), modification with the solutions (2 min, 25°C), further salivary pellicle formation (60 min, 37°C), and erosive challenge (1 min, 1% citric acid, pH 3.6). Relative surface microhardness (rSMH), surface reflection intensity (rSRI), and amount of calcium release (CaR) were investigated. Data were analyzed with Kruskal-Wallis and Wilcoxon rank sum tests (α=0.05). Results The polyphenol solutions containing fluoride, as well as additional flavors, protected enamel better than fluoride alone, and similar to the Sn2+/F- solution, when investigating both rSMH and CaR. When measuring rSRI, Sn2+/F- showed the best protection, while the polyphenol solutions were similar to fluoride. Conclusion For two of the three assessed parameters (rSMH and CaR), both developed polyphenol-rich rinsing solutions were able to protect enamel from erosion, improving/potentializing the effect of fluoride and matching the protection offered by the current gold standard rinsing solution.

Synergistic effect between plant extracts and fluoride to protect against enamel erosion: An in vitro study.

Polyphenol-rich solutions, such as plant extracts and teas, can modify the salivary pellicle and improve the protection against dental erosion. In this study, we further explored how these polyphenol-rich plant extracts solutions behave in the presence of fluoride. We distributed enamel specimens into 9 groups (n = 15): Control_No_F- (Deionized water); Control_F- (500 ppm F-), Grape_Seed_No_F- (Grape seed extract), Grape_Seed_F- (Grape seed extract + 500 ppm F-), Grapefruit_Seed_No_F- (Grapefruit seed extract), Grapefruit_Seed_F- (Grapefruit seed extract + 500 ppm F-), Blueberry_No_F- (Blueberry extract), Blueberry_F- (Blueberry extract + 500 ppm F-), and Sn2+/F-_Rinse (commercial solution containing 800 ppm Sn2+ and 500 ppm F-). The specimens were submitted to 5 cycles (1 cycle per day), and each cycle consisted of: salivary pellicle formation (human saliva, 30 min, 37°C), modification of the pellicle (2 min, 25°C), pellicle formation (60 min, 37°C), and an erosive challenge (1 min, citric acid). Between cycles, the specimens were kept in a humid chamber. Relative surface hardness (rSH), relative surface reflection intensity (rSRI) and calcium released to the acid were analysed, using general linear models, and Kruskal-Wallis with post-hoc Dunn's tests. We observed that the presence of fluoride in synergy with the extract solutions provided better protection than the groups containing extract or fluoride only. For rSH, we observed a significant main effect of extracts (F(4,117) = 9.20; p<0.001) and fluoride (F(1,117) = 511.55; p<0.001), with a significant interaction (F(3,117) = 6.71; p<0.001). Grape_Seed_F- showed the best protection, better than fluoride, and Sn2+/F-_Rinse. Calcium results also showed greater protection for the groups containing fluoride, whereas for rSRI, despite a significant interaction between extract and fluoride (F(3,117) = 226.05; p<0.001), the differences between the groups were not as clearly observed. We conclude that polyphenols from plant extracts, when combined with fluoride, improve the protective effect of salivary pellicles against enamel erosion.

Impact of desensitizing/whitening toothpastes on tooth color change after abrasion and erosion-abrasion.

OBJECTIVE: To evaluate the impact of desensitizing toothpastes (D), their whitening versions (DW) and whitening toothpastes (W) on tooth color change. METHODS: Tooth specimens were allocated into 11 groups (n = 10): 1. Artificial saliva (control); 2. Sensodyne Repair & Protect (SRP-D); 3. Sensodyne Repair & Protect Whitening (SRP-DW); 4. Colgate Sensitive Pro-Relief (CSPR-D); 5. Colgate Sensitive Pro-Relief Real White (CSPR-DW); 6. Colgate Total 12 (CT12); 7. Colgate Total 12 Whitening (CT12-W); 8. Sensodyne True White (ST-W); 9. Curaprox Black Is White (CB-W); 10.Oral-B 3D White Perfection (OB3D-W) and 11. Erosion-only. They were submitted to two models: A. abrasion; B. erosion/abrasion. Color change (ΔE00 ), ΔL, Δa, and Δb were determined with a spectrophotometer. Data were statistically evaluated (α = 0.05). RESULTS: For both models, ∆E00 of D did not differ significantly from DW. An overall decrease in luminosity (-∆L) and increase (+∆b) in yellowness of the tooth occurred. In abrasion, all groups reduced redness (-∆a) and only SRP-DW differed from control (p = 0.016), but for ∆E00 , ∆L and ∆b, all toothpastes did not differ from the control. In erosion/abrasion, CB-W showed significantly lower ∆E00 and ∆b than the control (∆E00 : p = 0.026; ∆b: p = 0.005) and SRP-D (∆E00 : p = 0.028; ∆b: p = 0.025). Only SRP-DW, CSPR-DW, ST-W, CB-W, and erosion-only had increased redness (+∆a), but none differed from control. CONCLUSIONS: The toothpastes did neither promote whitening nor avoid the yellowish aspect of the tooth after abrasion and erosion-abrasion, regardless of their claim. CLINICAL SIGNIFICANCE: Desensitizing and/or whitening toothpastes induced similar changes on tooth color, without promoting whitening effect or reduction in its yellowish aspect.

Acquired Pellicle Engineering Using a Combination of Organic (Sugarcane Cystatin) and Inorganic (Sodium Fluoride) Components against Dental Erosion.

This study evaluated the combination of a sugarcane cystatin (CaneCPI-5) and sodium fluoride (NaF) in acquired pellicle engineering for the prevention of dental erosion in vitro. Seventy-five human enamel specimens were prepared and divided into 5 treatment groups (n = 15/group): Deionized water (Control); Elmex™ (SnCl2/NaF/AmF); 0.1 mg/mL CaneCPI-5; 500 ppm NaF; and CaneCPI-5+NaF (Combination). The specimens were individually treated (200 µL; 2 min; 37°C), then incubated in human saliva (200 µL; 1 h, at 37°C) for acquired pellicle formation. Afterward, the specimens were submitted to an erosive challenge (1% citric acid [CR], pH 3.6, 10 mL, 2 min, 25 °C). This sequence was conducted 5 times. Percentage of surface microhardness change (%SMC), relative surface reflection intensity (rSRI), and calcium released to the CR were measured and analyzed by one-way ANOVA followed by Tukey's test (p < 0.05). In general, all the treatments (SnCl2/NaF/AmF, CaneCPI-5, NaF, and Combination) significantly protected the enamel when compared the control group. Regarding %SMC and rSRI, the Combination was the most effective treatment, reducing the %SMC significantly (p < 0.01) when compared to all the other treatments, although this difference was not significant in the CR analysis. All treatments demonstrated a protective effect on enamel against dental erosion; however, the combination of CaneCPI-5 with NaF showed a greater protection.

Activated charcoal toothpastes do not increase erosive tooth wear.

OBJECTIVES: To assess the effect of activated charcoal toothpastes on enamel and dentin erosive wear. METHODS: Ninety enamel and dentin slabs were randomly distributed into 9 experimental groups (n = 10/substrate): Artificial saliva (negative control); Elmex Caries (EXC - 1400 ppm F- as AmF, reference toothpaste without charcoal); Colgate Luminous White Activated Charcoal (CLW - 1000 ppm F- as MFP); Colgate Natural Extracts (CNE - 1450 ppm F- as NaF); Oral-B 3D White Mineral Clean (OMC - 1100 ppm F- as NaF); Curaprox Black is White (CBW - 950 ppm F- as MFP); Bianco Carbon (BIC - no F-); Natural Suavetex (NSX - no F-); Oralgen Nupearl Advanced (ONA - no F-). Specimens were submitted to a 5-day erosion-toothbrushing abrasion cycling. Surface loss (SL) was determined with an optical profilometer. pH and concentration of available fluoride in the slurries were also assessed. Data were statistically analyzed (α = 0.05). RESULTS: For both substrates, CBW, CNE and EXC had significantly lower SL values than the control. CLW and OMC promoted significantly less dentin wear than the control. All the other groups did not differ significantly from the control. There was a strong negative correlation between SL and concentration of fluoride in the slurries for enamel (r = -0.77) and dentin (r = -0.91), and a strong positive correlation (r = 0.77) between enamel SL and pH. CONCLUSIONS: For both substrates, none of the activated charcoal-based toothpastes resulted in higher SL than brushing with artificial saliva. Only two of the charcoal toothpastes and the reference toothpaste were able to provide further protection against SL. CLINICAL SIGNIFICANCE: Activated charcoal-containing toothpastes are becoming popular, despite the absence of evidence supporting their safety for use by individuals with erosive tooth wear. These products did not pose an additional risk for these subjects. However, it would be preferable to use products that exhibits further protective effect.

Acquired pellicle engineering with proteins/peptides: Mechanism of action on native human enamel surface.

OBJECTIVE: This study investigated the mechanism of action of different proteins/peptides (separately or in combination), focusing on how they act directly on the native enamel surface and on modifying the salivary pellicle. METHODS: A total of 170 native human enamel specimens were prepared and submitted to different treatments (2 h; 37 °C): with deionized water, CaneCPI-5, Hemoglobin, Statherin, or a combination of all three proteins/peptides. The groups were subdivided into treatment acting on the enamel surface (NoP - absence of salivary pellicle), and treatment modifying the salivary pellicle (P). Treatment was made (2 h; 37 °C) in all specimens, and later, for P, the specimens were incubated in human saliva (2 h; 37 °C). In both cases, the specimens were immersed in 1% citric acid (pH 3.6; 2 min; 25 °C). Calcium released from enamel (CaR) and its relative surface reflection intensity (%SRI) was measured after 5 cycles. Between-group differences were verified with two-way ANOVA, with "presence of pellicle" and "treatment" as factors (α = 0.05). RESULTS: The presence of pellicle provided better protection regarding %SRI (p < 0.01), but not regarding CaR (p = 0.201). In relation to treatment, when compared to the control group, all proteins/peptides provided significantly better protection (p < 0.01 for %SRI and Car). The combination of all three proteins/peptides demonstrated the best protective effect (p < 0.01 for %SRI). CONCLUSION: Depending on the protein or peptide, its erosion-inhibiting effect derives from their interaction with the enamel surface or from modifying the pellicle, so a combination of proteins and peptides provides the best protection. CLINICAL SIGNIFICANCE: The present study opens a new direction for a possible treatment with a combination of proteins for native human enamel, which can act directly on the enamel surface as well on the modification of the salivary pellicle, for the prevention of dental erosion.

Salivary pellicle modification with polyphenol-rich teas and natural extracts to improve protection against dental erosion.

OBJECTIVE: To investigate the modification of the salivary pellicle with different polyphenol-rich teas and natural extracts for the protection against dental erosion. METHODS: We performed two experiments: one with teas (Green tea, Black tea, Peppermint tea, Rosehip tea, negative control [NC]) and other with natural extracts (Grape seed, Grapefruit seed, Cranberry, Propolis, NC), where NC was deionized water. A total of 150 enamel specimens were used (n = 15/group). Both experiments followed the same design, consisting of 5 cycles of: salivary pellicle formation (30 min, 37 °C), modification with the solutions (30 min, 25 °C), further salivary pellicle formation (60 min, 37 °C) and erosive challenge (1 min, 1% citric acid, pH 3.6). Relative surface microhardness (rSMH), relative surface reflection intensity (rSRI) and amount of calcium release (CaR) were evaluated. Data were analysed with Kruskal-Wallis and Wilcoxon rank sum tests with Bonferroni correction (α = 0.05). RESULTS: Regarding teas, Black and Green teas showed the best protection against dental erosion, presenting higher rSMH and lower CaR than NC. Peppermint tea was not different to NC and Rosehip tea caused erosion, showing the highest CaR and greatest loss of SMH and SRI. Regarding natural extracts, Grape seed and Grapefruit seed extracts presented the best protective effect, with significantly higher rSMH and lower CaR. Cranberry caused significantly more demineralization; and Propolis did not differ from NC. CONCLUSION: Green tea, Black tea, Grape seed extract and Grapefruit seed extract were able to modify the salivary pellicle and improve its protective effect against enamel erosion, but Rosehip tea and Cranberry extract caused erosion. CLINICAL RELEVANCE: Some some bio-products, such as teas and natural extracts, improve the protective effect of the salivary pellicle against enamel erosion. More studies should be performed in order to test the viability of their use as active ingredients for oral care products.

The effect of red wine in modifying the salivary pellicle and modulating dental erosion kinetics.

This study investigated the potential of red wine in modulating dental erosion kinetics in the presence or absence of salivary pellicle. Polished human enamel specimens were used in two conditions; presence or absence of acquired enamel pellicle; and subdivided according to exposure: red wine, orange juice, apple juice, or citric acid. The specimens were incubated in clarified whole human saliva (presence of acquired enamel pellicle) or in a humid chamber (absence of acquired enamel pellicle) for 2 h at 37°C, then in the test substances for 1 min, at 25°C, under shaking. This was repeated four times. Surface hardness was measured initially and after each cycle and surface reflection intensity was measured initially and after all cycles. In the presence of acquired enamel pellicle, red wine caused the least surface hardness loss, followed by orange juice, apple juice, and citric acid. Statistically significantly less surface reflection intensity loss was observed for red wine and orange juice than for apple juice and citric acid. In the absence of acquired enamel pellicle, red wine and orange juice caused less surface hardness loss than apple juice and citric acid. Orange juice showed the least surface reflection intensity loss, followed by red wine, citric acid, and apple juice. The polyphenol composition of these drinks can notably modulate the erosion kinetics.