Microplastic Abundance and Sources in Surface Water Samples of the Vaal River, South Africa.

Microplastics (MPs) have emerged as a global environmental concern due to their persistent nature. In South Africa, microplastic research has primarily focused on marine systems. However, recent years have seen a shift in focus to studying MPs in South African freshwaters. In this study, MPs with a minimum size of 0.055 mm in surface water of the Vaal River, South Africa, were reported. MPs were 100% prevalent, with a mean numerical abundance of 0.68 ± 0.64 particles/m3. Small-sized MPs of < 1 mm accounted for the largest proportion. MPs were chemically identified as high-density polyethylene, low-density polyethylene, and polypropylene according to their Raman spectra. The prevalence of fragments (41.6%) and fibers (38.5%) over pellets (8.1%) indicates that microplastics are from secondary sources. The prevalence of polyethylene and polypropylene is consistent with microplastics being from secondary sources. These polymers are commonly used in single-use plastics, packing bags, textiles, and containers. These characteristics are of great concern due to their implications on the bioavailability and toxicological impacts of MPs. Consequently, these properties may pose more hazards to aquatic biota inhabiting the Vaal River.

First biomonitoring of microplastic pollution in the Vaal river using Carp fish (Cyprinus carpio) "as a bio-indicator".

Fish inhabiting freshwater environments are susceptible to the ingestion of microplastics (MPs). Knowledge regarding MPs in freshwater fish in South Africa is very limited. In this study, the uptake of MPs by common carp (Cyprinus carpio) in the Vaal River in South Africa was assessed. MPs were detected in all of the twenty-six fish examined, 682 particles of MPs were recovered from the gastrointestinal tracts of the fish with an average of 26.23 ± 12.57 particles/fish, and an average abundance of 41.18 ± 52.81 particles/kg. The examination of the physical properties of MPs revealed a predominance on fibers (69%), small-sized particles of less than 0.5 mm (48%), as well as prevelance of coloured MPs (94%), mostly green, blue, and black. Using Raman Spectroscopy, the following plastic polymers were identified: high density polyethylene (HDPE), low density polyethylene (LDPE), polypropylene (PP), polyethylene terephthalate (PET), and polytetrafluoroethylene (PTFE). To the best of our knowledge, this study, is the first to report MPs uptake by freshwater biota in the Vaal River using common carp as a target organism. It provided evidence of MP contamination in the Vaal.

A review of the cost and effectiveness of solutions to address plastic pollution.

Plastic usage increases year by year, and the growing trend is projected to continue. However as of 2017, only 9% of the 9 billion tons of plastic ever produced had been recycled leaving large amounts of plastics to contaminate the environment, resulting in important negative health and economic impacts. Curbing this trend is a major challenge that requires urgent and multifaceted action. Based on scientific and gray literature mainly published during the last 10 years, this review summarizes key solutions currently in use globally that have the potential to address at scale the plastic and microplastic contaminations from source to sea. They include technologies to control plastics in solid wastes (i.e. mechanical and chemical plastic recycling or incineration), in-stream (i.e. booms and clean-up boats, trash racks, and sea bins), and microplastics (i.e. stormwater, municipal wastewater and drinking water treatment), as well as general policy measures (i.e. measures to support the informal sector, bans, enforcement of levies, voluntary measures, extended producer responsibility, measures to enhance recycling and guidelines, standards and protocols to guide activities and interventions) to reduce use, reuse, and recycle plastics and microplastics in support of the technological options. The review discusses the effectiveness, capital expenditure, and operation and maintenance costs of the different technologies, the cost of implementation of policy measures, and the suitability of each solution under various conditions. This guidance is expected to help policymakers and practitioners address, in a sustainable and cost-efficient way, the plastic and microplastic management problem using technologies and policy instruments suitable in their local context.

The contribution of tipping fees to the operation, maintenance, and management of fecal sludge treatment plants: The case of Ghana.

Globally, collection of tipping fees is being promoted as a solution to sustain the operation of fecal sludge treatment plants (FSTPs). Currently, there are six large-scale FSTPs in Ghana, of which five were in operation in June 2017. In Kumasi, Sekondi-Takoradi and Tamale, fecal sludge (FS) is co-treated with landfill leachate using waste stabilization ponds (WSPs). In Tema and Accra, FS is treated using WSPs and a mechanical dewatering system coupled with an upflow anaerobic sludge blanket (UASB). The focus of this study is FSTPs and to assess how, and if, the tipping fees set by the municipalities could enable cost recovery to sustain their long-term operation. Using a questionnaire survey to interview plant managers from the public and private sectors, and directors of waste management departments, we found that the overall average operation, maintenance and management (OM&M) costs per 1000 m3 of treated waste (FS or FS + leachate) in 2017 were USD89 in Kumasi, USD150 in Tamale, USD179 in Tema, USD244 in Sekondi-Takoradi and USD1,743 in Accra. There were important disparities between FSTPs due to their scale, age, and level of treatment and monitoring. Currently, most FSTPs charge tipping fees that range between USD310 and USD530/1000 m3 of FS, averaging USD421 ± 98/1000 m3 of FS discharged at FSTPs. Our study also showed that the OM&M costs of large-scale intensive FSTPs cannot be sustained by relying solely on tipping fees. However, there could be potential to cover the routine expenditures associated with operating smaller FSTPs that relying on WSP technologies.

Crops and farmers' response to application of fecal sludge derived - Fortifer™ in different agro-ecological zones in Ghana.

Fecal sludge (FS)-derived fertilizer material, Fortifer™ was used in farmers' field to cultivate different crops under varying soil and agro-climatic conditions in Ghana. The aim was to (1) create awareness among smallholder farmers for widespread use of Fortifer™ (2) observe the response of crops to Fortifer™ application by farmers in different agro-ecological zones (3) obtain farmers feedback on the FS-derived product to enhance further dissemination across the country. In total 95 farmers in six locations participated in the farmer-led pilots. Fortifer™ containing up to 3.0% nitrogen, 3.6% phosphorus, 1.3% potassium and 44.3% organic matter was applied to tomato, rice, maize and pepper in comparison to inorganic fertilizers at recommended rates. Subsequently, farmers' perception of, and willingness to use the product were studied. Crop yield was significantly higher (p ≤ 0.05) in the Fortifer™ plots compared to the inorganic fertilizer plots for all the selected crops. Yield was 12% higher for tomato, 27% for rice and maize and 30% for pepper under the Fortifer™ plots. Farmers indicated that, nutrient content was the most important factor they consider when making fertilizer purchasing decision.

Elimination of volatile organic compounds by biofiltration: a review.

Volatile organic compounds (VOCs) are pollutants that are responsible for the formation of the tropospheric ozone, one of the precursors of smog. VOCs are emitted by various industries including chemical plants, pulp and paper mills, pharmaceuticals, cosmetics, electronics and agri-food industries. Some VOCs cause odor pollution while many of them are harmful to environment and human or animal health. For the removal of VOCs, biofiltration, a biological process, has proved to be reliable when properly operated. This process has therefore been widely applied in Europe and North America. The main advantages associated with the use of biofiltration are related to its set-up, maintenance, and operating costs which are usually lower than those related to other VOCs control technologies and because it is less harmful for the environment than conventional processes like incineration. In the present paper, the main parameters (type, moisture, pH, and temperature of filter bed, microbial population, nutrients concentrations, and VOCs' inlet load) to be controlled during the biofiltration are identified and described in detail. The main phenomena involved in biofiltration are also discussed. For improving the efficiency of VOC control biotechnology, new techniques are now proposed that include the use of membranes, biphasic reactors, UV photolysis, and many others.