Hot and Cold: Photochemical Weathering Mediates Oil Properties and Fate Differently Depending on Seawater Temperature.

Photochemical weathering transforms petroleum oil and changes its bulk physical properties, as well as its partitioning into seawater. This transformation process is likely to occur in a cold water marine oil spill, but little is known about the behavior of photochemically weathered oil in cold water. We quantified the effect of photochemical weathering on oil properties and partitioning across temperatures. Compared to weathering in the dark, photochemical weathering increases oil viscosity and water-soluble content, decreases oil-seawater interfacial tension, and slightly increases density. Many of these photochemical changes are much larger than changes caused by evaporative weathering. Further, the viscosity and water-soluble content of photochemically weathered oil are more temperature-sensitive compared to evaporatively weathered oil, which changes the importance of key fate processes in warm versus cold environments. Compared to at 30 °C, photochemically weathered oil at 5 °C would have a 16× higher viscosity and a 7× lower water-soluble content, resulting in lower entrainment and dissolution. Collectively, the physical properties and thus fate of photochemically weathered oil in a cold water spill may be substantially different from those in a warm water spill. These differences could affect the choice of oil spill response options in cold, high-light environments.

High Voltage: The Molecular Properties of Redox-Active Dissolved Organic Matter in Northern High-Latitude Lakes.

Redox-active functional groups in dissolved organic matter (DOM) are crucial for microbial electron transfer and methane emissions. However, the extent of aquatic DOM redox properties across northern high-latitude lakes and their relationships with DOM composition have not been thoroughly described. We quantified electron donating capacity (EDC) and electron accepting capacity (EAC) in lake DOM from Canada to Alaska and assessed their relationships with parameters from absorbance, fluorescence, and ultrahigh resolution mass spectrometry (FT-ICR MS) analyses. EDC and EAC are strongly tied to aromaticity and negatively related to aliphaticity and protein-like content. Redox-active formulae spanned a range of aromaticity, including highly unsaturated phenolic formulae, and correlated negatively with many aliphatic N and S-containing formulae. This distribution illustrates the compositional diversity of redox-sensitive functional groups and their sensitivity to ecosystem properties such as local hydrology and residence time. Finally, we developed a reducing index (RI) to predict EDC in aquatic DOM from FT-ICR MS spectra and assessed its robustness using riverine DOM. As the hydrology of the northern high-latitudes continues to change, we expect differences in the quantity and partitioning of EDC and EAC within these lakes, which have implications for local water quality and methane emissions.

Hydroxyapatite catalyzed hydrothermal liquefaction transforms food waste from an environmental liability to renewable fuel.

Food waste is an abundant and inexpensive resource for the production of renewable fuels. Biocrude yields obtained from hydrothermal liquefaction (HTL) of food waste can be boosted using hydroxyapatite (HAP) as an inexpensive and abundant catalyst. Combining HAP with an inexpensive homogeneous base increased biocrude yield from 14 ± 1 to 37 ± 3%, resulting in the recovery of 49 ± 2% of the energy contained in the food waste feed. Detailed product analysis revealed the importance of fatty-acid oligomerization during biocrude formation, highlighting the role of acid-base catalysts in promoting condensation reactions. Economic and environmental analysis found that the new technology has the potential to reduce US greenhouse gas emissions by 2.6% while producing renewable diesel with a minimum fuel selling price of $1.06/GGE. HAP can play a role in transforming food waste from a liability to a renewable fuel.

Time-dependent molecular progression and acute toxicity of oil-soluble, interfacially-active, and water-soluble species reveals their rapid formation in the photodegradation of Macondo Well Oil.

Photodegradation is a significant weathering process that transforms spilled oil, yet, the fate, degradation rate, and molecular transformations that occur through photoinduced pathways remain relatively unknown. The molecular complexity combined with the increased polarity of photoproducts challenges conventional analytical techniques. Here, we catalogue the molecular progression of photochemical transformation products of Macondo Well Oil by negative-ion electrospray ionization (ESI) Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). We track the molecular compositions of oil-soluble, interfacially-active, and water-soluble oil species formed at varying time intervals in photomicrocosm experiments. Short photoirradiation periods (<24 h), not previously reported, are included to reveal rapid photooxidation of native oil components. Surface oil films exposed to solar irradiation were shown to increasingly contribute to the dissolved organic carbon pool as a function of increased irradiation time. FT-ICR MS analysis of acidic species of each fraction identifies tens of thousands of oil-soluble, interfacially-active, and water-soluble phototransformation products, including Ox, NOx, and SOx species. Oil-soluble species incorporate oxygen as a function of irradiation periods. After 96 h of irradiation, ~14 wt% of the photooxidized oil film was interfacially active and contained phototransformed species with up to 12 oxygen atoms per molecule. Water-soluble species correspond to highly oxygenated compounds. Importantly, photochemical oxidation is shown to occur within the first hour. Beyond 24 h, photoproducts remain compositionally similar, highlighting the rapid effect of photodegradation to transform oil species into water-soluble compounds. Molecular fingerprints provided by FT-ICR MS highlight the oxygen dependence on oil/water solubility. Microtox® analysis indicates that the toxicity of water-soluble photoproducts rapidly increases at early irradiation time points (first 24 h) compared to the dark control and reaches a maximum at 6 h of irradiation. Results highlight the temporal, molecular progression of photoproducts as they partition from oil-soluble to oil-soluble interfacially-active, and finally to water-soluble species.

Plastic Formulation is an Emerging Control of Its Photochemical Fate in the Ocean.

Sunlight exposure is a control of long-term plastic fate in the environment that converts plastic into oxygenated products spanning the polymer, dissolved, and gas phases. However, our understanding of how plastic formulation influences the amount and composition of these photoproducts remains incomplete. Here, we characterized the initial formulations and resulting dissolved photoproducts of four single-use consumer polyethylene (PE) bags from major retailers and one pure PE film. Consumer PE bags contained 15-36% inorganic additives, primarily calcium carbonate (13-34%) and titanium dioxide (TiO2; 1-2%). Sunlight exposure consistently increased production of dissolved organic carbon (DOC) relative to leaching in the dark (3- to 80-fold). All consumer PE bags produced more DOC during sunlight exposure than the pure PE (1.2- to 2.0-fold). The DOC leached after sunlight exposure increasingly reflected the 13C and 14C isotopic composition of the plastic. Ultrahigh resolution Fourier transform ion cyclotron resonance mass spectrometry revealed that sunlight exposure substantially increased the number of DOC formulas detected (1.1- to 50-fold). TiO2-containing bags photochemically degraded into the most compositionally similar DOC, with 68-94% of photoproduced formulas in common with at least one other TiO2-containing bag. Conversely, only 28% of photoproduced formulas from the pure PE were detected in photoproduced DOC from the consumer PE. Overall, these findings suggest that plastic formulation, especially TiO2, plays a determining role in the amount and composition of DOC generated by sunlight. Consequently, studies on pure, unweathered polymers may not accurately represent the fates and impacts of the plastics entering the ocean.

Role of Molecular Structure in the Production of Water-Soluble Species by Photo-oxidation of Petroleum.

Asphaltenes are high-boiling and recalcitrant compounds that are generally minor components of crude oil (∼0.1-15.0 wt %) but dominate the composition of heavily weathered spilled petroleum. These solid residues exhibit a high structural complexity, comprised of polycyclic aromatic hydrocarbons (PAHs) that are a mixture of single-core (island) and multicore (archipelago) structural motifs. The mass fraction of each motif is sample-dependent. Thus, knowledge of a potential structural dependence (single- versus multicore) on the production of water-soluble species from asphaltene samples is key to understanding the contribution of photochemically generated dissolved organic matter from oil spills. In this work, asphaltene samples with enriched mass fractions of either island (single-core) or archipelago (multicore) structural motifs are photo-oxidized on artificial seawater by the use of a solar simulator. Molecular characterization of oil- and water-soluble photoproducts, conducted by Fourier transform ion cyclotron resonance mass spectrometry, reveals that island motifs exhibit very limited production of water-soluble species, and their oil-soluble products reflect the molecular composition of the starting material. Conversely, archipelago motifs yield a water-soluble compositional continuum of Ox, SxOy, and NxOy containing hydrocarbons species that exhibit the typical molecular fingerprint of dissolved organic matter (DOM). The lower carbon number and aromaticity of the archipelago-derived asphaltene photoproducts suggest the occurrence of photofragmentation (or photolysis) reactions. To investigate the possibility of the opposite reaction (photopolymerization), the photo-oxidation of small PAHs isolated from a low-boiling petroleum distillation cut was also performed. It yielded water-soluble compounds with carbon number and aromaticity up to 2-fold higher than the starting material, strongly suggesting that polymerization (addition reactions) occurs. Collectively, the results indicate that the presence of archipelago motifs and the occurrence of cracking/polymerization reactions are central in the production of dissolved organic matter from fossil fuels.

Characterization of an Asphalt Binder and Photoproducts by Fourier Transform Ion Cyclotron Resonance Mass Spectrometry Reveals Abundant Water-Soluble Hydrocarbons.

Road asphalt is comprised of aggregate (rocks) mixed with a binder composed of high-boiling petroleum-derived compounds, which have been thought to be relatively inert (unreactive) and thus leach small amounts of polyaromatic hydrocarbons (PAHs) into water from the built environment. However, recent studies have demonstrated that petroleum readily undergoes photooxidation and generates water-soluble oxygen-containing hydrocarbons. Therefore, here, we investigate the effects of solar irradiation on an asphalt binder. Upon irradiation in a photooxidation microcosm, thin films of the asphalt binder produce abundant oil- and water-soluble oxygenated hydrocarbons, which we hypothesize are also leached from roads and highways through photooxidation reactions. Ultrahigh-resolution Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) enables extensive compositional characterization of the virgin asphalt binder, irradiated asphalt binder, and the water-soluble photoproducts. The results reveal the production of water-soluble species that resemble the molecular composition of petroleum-derived dissolved organic matter, including abundant hydrocarbons and S-containing species with up to 18 oxygen atoms. The results also confirm photo-induced oxidation, fragmentation, and potentially polymerization as active processes involved in the production of water-soluble organic pollutants from asphalt.

Molecular-Level Characterization of Oil-Soluble Ketone/Aldehyde Photo-Oxidation Products by Fourier Transform Ion Cyclotron Resonance Mass Spectrometry Reveals Similarity Between Microcosm and Field Samples.

We present a solid-phase extraction method followed by derivatization with a charged tag to characterize ketone/aldehyde-containing functionalities (proposed photo-oxidation transformation products) in weathered petroleum by Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). A photo-oxidation-only microcosm mimics solar irradiation of crude oil in the environment after an oil spill. A biodegradation-only microcosm enables independent determination as to which of the two weathering processes contributes to the formation of oil-soluble ketone/aldehyde species. Results confirm that photo-oxidation produces ketones/aldehydes in crude oil when exposed to solar radiation in laboratory experiments, whereas biodegraded oil samples do not produce ketone/aldehyde compounds. Field samples collected after different time periods and locations after the Deepwater Horizon oil spill are also shown to contain ketones/aldehydes, and comparison of field and photo-oxidation-only microcosm transformation products reveal remarkable similarity. These results indicate that the photo-oxidation microcosm comprehensively represents ketone/aldehyde-formation products in the field, whereas the biodegradation microcosm does not. Solid-phase extraction coupled with derivatization leads to selective identification of ketone/aldehyde species by MS. Although improved dynamic range and slightly reduced mass spectral complexity is achieved by separation/derivatization, comprehensive molecular characterization still requires mass resolving power and mass accuracy provided by FT-ICR MS.

Combating selective ionization in the high resolution mass spectral characterization of complex mixtures.

Direct "dilute and shoot" mass spectral analysis of complex naturally-occurring mixtures has become the "standard" analysis in environmental and petrochemical science, as well as in many other areas of research. Despite recent advances in ionization methods, that approach still suffers several limitations for the comprehensive characterization of compositionally complex matrices. Foremost, the selective ionization of highly acidic (negative electrospray ionization ((-) ESI)) and/or basic (positive electrospray ionization ((+) ESI)) species limits the detection of weakly acidic/basic species, and similar issues (matrix effects) complicate atmospheric pressure photo-ionization (APPI)/atmospheric pressure chemical ionization (APCI) analyses. Furthermore, given the wide range of chemical functionalities and structural motifs in these compositionally complex mixtures, aggregation can similarly limit the observed species to a small (10-20%) mass fraction of the whole sample. Finally, irrespective of the ionization method, the mass analyzer must be capable of resolving tens-of-thousands of mass spectral peaks and provide the mass accuracy (typically 50-300 ppb mass measurement error) required for elemental composition assignment, and thus is generally limited to high-field Fourier transform ion cyclotron mass spectrometry (FT-ICR MS). Here, we describe three approaches to combat the above issues for (+) ESI, (-) ESI, and (+) APPI FT-ICR MS analysis of petroleum samples. Each approach relies on chromatographic fractionation to help reduce selective ionization discrimination and target either specific chemical functionalities (pyridinic and pyrrolic species (nitrogen) or carboxylic acids (oxygen)) or specific structural motifs (single aromatic core (island) or multi-core aromatics (archipelago)) known to be related to ionization efficiency. Each fractionation method yields a 2-10-fold increase in the compositional coverage, exposes species that are undetectable using direct "dilute and shoot" analysis, and provides coarse selectivity in chemical functionalities that can both increase the assignment confidence and optimize ionization conditions to maximize compositional coverage.