Boosting Titanium Surfaces with Positive Charges: Newly Developed Cationic Coating Combines Anticorrosive and Bactericidal Properties for Implant Application.

Along with poor implant-bone integration, peri-implant diseases are the major causes of implant failure. Although such diseases are primarily triggered by biofilm accumulation, a complex inflammatory process in response to corrosive-related metallic ions/debris has also been recognized as a risk factor. In this regard, by boosting the titanium (Ti) surface with silane-based positive charges, cationic coatings have gained increasing attention due to their ability to kill pathogens and may be favorable for corrosion resistance. Nevertheless, the development of a cationic coating that combines such properties in addition to having a favorable topography for implant osseointegration is lacking. Because introducing hydroxyl (-OH) groups to Ti is essential to increase chemical bonds with silane, Ti pretreatment is of utmost importance to achieve such polarization. In this study, plasma electrolytic oxidation (PEO) was investigated as a new route to pretreat Ti with OH groups while providing favorable properties for implant application compared with traditional hydrothermal treatment (HT). To produce bactericidal and corrosion-resistant cationic coatings, after pretreatment with PEO or HT (Step 1), surface silanization was subsequently performed via immersion-based functionalization with 3-aminopropyltriethoxysilane (APTES) (Step 2). In the end, five groups were assessed: untreated Ti (Ti), HT, PEO, HT+APTES, and PEO+APTES. PEO created a porous surface with increased roughness and better mechanical and tribological properties compared with HT and Ti. The introduction of -OH groups by HT and PEO was confirmed by Fourier transform infrared spectroscopy and the increase in wettability producing superhydrophilic surfaces. After silanization, the surfaces were polarized to hydrophobic ones, and an increase in the amine functional group was observed by X-ray photoelectron spectroscopy, demonstrating a considerable amount of positive ions. Such protonation may explain the enhanced corrosion resistance and dead bacteria (Streptococcus aureus and Escherichia coli) found for PEO+APTES. All groups presented noncytotoxic properties with similar blood plasma protein adsorption capacity vs the Ti control. Our findings provide new insights into developing next-generation cationic coatings by suggesting that a tailorable porous and oxide coating produced by PEO has promise in designing enhanced cationic surfaces targeting biomedical and dental implant applications.

Effect of Plasma Excitation Power on the SiOxCyHz/TiOx Nanocomposite.

Titanium dioxide has attracted a great deal of attention in the field of environmental purification due to its photocatalytic activity under ultraviolet light. Photocatalytic efficiency and the energy required to initiate the process remain the drawbacks that hinder the widespread adoption of the process. Consistently with this, it is proposed here the polymerization of hexamethyldisiloxane fragments simultaneously to TiO2 sputtering for the production of thin films in low-pressure plasma. The effect of plasma excitation power on the molecular structure and chemical composition of the films was evaluated by infrared spectroscopy. Wettability and surface energy were assessed by a sessile drop technique, using deionized water and diiodomethane. The morphology and elemental composition of the films were determined using scanning electron microscopy and energy dispersive spectroscopy, respectively. The thickness and roughness of the resulting films were measured using profilometry. Organosilicon-to-silica films, with different properties, were deposited by combining both deposition processes. Titanium was detected from the structures fabricated by the hybrid method. It has been observed that the proportion of titanium and particles incorporated into silicon-based matrices depends on the plasma excitation power. In general, a decrease in film thickness with increasing power has been observed. The presence of Ti in the plasma atmosphere alters the plasma deposition mechanism, affecting film deposition rate, roughness, and wettability. An interpretation of the excitation power dependence on the plasma activation level and sputtering yield is proposed. The methodology developed here will encourage researchers to create TiO2 films on a range of substrates for their prospective use as sensor electrodes, water and air purification systems, and biocompatible materials.

The race for the optimal antimicrobial surface: perspectives and challenges related to plasma electrolytic oxidation coating for titanium-based implants.

Plasma electrolytic oxidation (PEO) is a low-cost, structurally reliable, and environmentally friendly surface modification method for orthopedic and dental implants. This technique is successful for the formation of porous, corrosion-resistant, and bioactive coatings, besides introducing antimicrobial compounds easily. Given the increase in implant-related infections, antimicrobial PEO-treated surfaces have been widely proposed to surmount this public health concern. This review comprehensively discusses antimicrobial implant surfaces currently produced by PEO in terms of their in vitro and in vivo microbiological and biological properties. We present a critical [part I] and evidence-based [part II] review about the plethora of antimicrobial PEO-treated surfaces. The mechanism of microbial accumulation on implanted devices and the principles of PEO technology to ensure antimicrobial functionalization by one- or multi-step processes are outlined. Our systematic literature search showed that particular focus has been placed on the metallic and semi-metallic elements incorporated into PEO surfaces to facilitate antimicrobial properties, which are often dose-dependent, without leading to cytotoxicity in vitro. Meanwhile, there are concerns over the biocompatibility of PEO and its long-term antimicrobial effects in animal models. We clearly highlight the importance of using clinically relevant infection models and in vivo long-term assessments to guarantee the rational design of antimicrobial PEO-treated surfaces to identify the 'finish line' in the race for antimicrobial implant surfaces.

Copper source determines chemistry and topography of implant coatings to optimally couple cellular responses and antibacterial activity.

Implant-related infections at the early healing period are considered one of the main risk factors in implant failure. Designing coatings that control bacterial adhesion and have cell stimulatory behavior remains a challenging strategy for dental implants. Here, we used plasma electrolytic oxidation (PEO) to produce antimicrobial coatings on commercially pure titanium (cpTi) using bioactive elements (calcium and phosphorus) and different copper (Cu) sources: copper acetate (CuAc), copper sulfate (CuS), and copper oxide (CuO); coatings containing only Ca and P (CaP) served as controls. Cu sources drove differential physical and chemical surface features of PEO coatings, resulting in tailorable release kinetics with a sustained Cu ion release over 10 weeks. The antibacterial effects of Cu-containing coatings were roughness-dependent. CuAc coating exhibited optimal properties in terms of its hydrophilicity, pores density, and limited surface roughness, which provided the most robust antibacterial activity combined with appropriate responses of human primary stem cells and angiogenic cells. Our data indicate that Cu source selection largely determines the functionality of Cu-containing PEO coatings regarding their antibacterial efficacy and cytocompatibility.

Thin Film Deposition by Atmospheric Pressure Dielectric Barrier Discharges Containing Eugenol: Discharge and Coating Characterizations.

Eugenol (4-Allyl-2-methoxyphenol) is the main constituent of clove oil. In addition to being widely used as a condiment, it has been recognized as a powerful bactericide. Owing to that, Eugenol has been used in several applications including odontology and as a conservative for food products. Aiming at the development of natural bactericide coatings, in this work, using an atmospheric pressure plasma in a dielectric barrier discharge (DBD) reactor Eugenol was deposited on stainless steel substrate, with argon as a carrier gas. The discharge power supply was a transformer at 14.4 kV peak-to-peak voltage and 60 Hz frequency. Operating with a gas flow rate at 4 L/min, the active power was around 1.2 W. The maximum plasma electron temperature of the plasma with monomers was about 1.5 eV, estimated by visible emission spectroscopy using a local thermodynamic equilibrium approach. The study also comprehended the analysis of the film structure, aging, and thermal stability using infrared reflectance spectroscopy, and its thicknesses and roughness by profilometry. The thickness of the films was in the range of 1000 to 2400 nm with a roughness of up to 800 nm with good adhesion on the substrate. The FTIR result shows a stable coating with a chemical structure similar to that of the monomer. Aging analysis showed that the film does not degrade, even after exposing the film for 120 days in ambient air and for 1.0 h under a high thermal UV-lamp.

Nitric oxide in the insular cortex modulates baroreflex responses in a cGMP-independent pathway.

Insular cortex is a brain structure involved in the modulation of autonomic activity and cardiovascular function. The nitric oxide/cyclic guanosine-3',5'-monophosphate pathway is a prominent signaling mechanism in the central nervous system, controlling behavioral and physiological responses. Nevertheless, despite evidence regarding the presence of nitric oxide-synthesizing neurons in the insular cortex, its role in the control of autonomic and cardiovascular function has never been reported. Thus, the present study aimed to investigate the involvement of nitric oxide/cyclic guanosine-3',5'-monophosphate pathway mediated by neuronal nitric oxide synthase (nNOS) activation within the insular cortex in the modulation of baroreflex responses in unanesthetized rats. For this, we evaluated the effect of bilateral microinjection of either the nitric oxide scavenger carboxy-PTIO, the selective neuronal nitric oxide synthase inhibitor Nω-Propyl-l-arginine or the soluble guanylate cyclase inhibitor ODQ into the insular cortex on the bradycardia evoked by blood pressure increases in response to intravenous infusion of phenylephrine, and the tachycardia caused by blood pressure decreases evoked by intravenous infusion of sodium nitroprusside. Bilateral microinjection of either NPLA or carboxy-PTIO into the insular cortex increased the reflex bradycardic response, whereas the reflex tachycardia was decreased by these treatments. Bilateral microinjection of the soluble guanylate cyclase inhibitor into the insular cortex did not affect any parameter of baroreflex function evaluated. Overall, our findings provide evidence that insular cortex nitrergic signaling, acting via neuronal nitric oxide synthase, plays a prominent role in control of baroreflex function. However, control of reflex responses seems to be independent of soluble guanylate cyclase activation.

Synthesis of bioactive glass-based coating by plasma electrolytic oxidation: Untangling a new deposition pathway toward titanium implant surfaces.

HYPOTHESIS: Although bioactive glass (BG) particle coatings were previously developed by different methods, poor particle adhesion to surfaces and reduced biological effects because of glass crystallization have limited their biomedical applications. To overcome this problem, we have untangled, for the first time, plasma electrolytic oxidation (PEO) as a new pathway for the synthesis of bioactive glass-based coating (PEO-BG) on titanium (Ti) materials. EXPERIMENTS: Electrolyte solution with bioactive elements (Na2SiO3-5H2O, C4H6O4Ca, NaNO3, and C3H7Na2O6P) was used as a precursor source to obtain a 45S5 bioglass-like composition on a Ti surface by PEO. Subsequently, the PEO-BG coating was investigated with respect to its surface, mechanical, tribological, electrochemical, microbiological, and biological properties, compared with those of machined and sandblasted/acid-etched control surfaces. FINDINGS: PEO treatment produced a coating with complex surface topography, Ti crystalline phases, superhydrophilic status, chemical composition, and oxide layer similar to that of 45S5-BG (~45.0Si, 24.5 Ca, 24.5Na, 6.0P w/v%). PEO-BG enhanced Ti mechanical and tribological properties with higher corrosion resistance. Furthermore, PEO-BG had a positive influence in polymicrobial biofilms, by reducing pathogenic bacterial associated with biofilm-related infections. PEO-BG also showed higher adsorption of blood plasma proteins without cytotoxic effects on human cells, and thus may be considered a promising biocompatible approach for biomedical implants.

Atmospheric Pressure Plasma Chemical Vapor Deposition of Carvacrol Thin Films on Stainless Steel to Reduce the Formation of E. Coli and S. Aureus Biofilms.

In this paper, we have investigated the deposition of thin films from natural carvacrol extract using dielectric barrier discharge (DBD) plasma polymerization, aiming at the inhibition of bacteria adhesion and proliferation. The films deposited on stainless steel samples have been characterized by scanning electron microscopy, infrared reflectance-absorbance spectroscopy, profilometry, and contact angle measurements. Films with thicknesses ranging from 1.5 µm to 3.5 µm presented a chemical structure similar to that of carvacrol. While the formation of biofilm was observed on untreated samples, the coating completely inhibited the adhesion of E. coli and reduced the adhesion of S. aureus biofilm in more than 90%.

Biological bases for a possible effect of cannabidiol in Parkinson's disease

Current pharmacotherapy of Parkinson's disease (PD) is palliative and unable to modify the progression of neurodegeneration. Treatments that can improve patients' quality of life with fewer side effects are needed, but not yet available. Cannabidiol (CBD), the major non-psychotomimetic constituent of cannabis, has received considerable research attention in the last decade. In this context, we aimed to critically review the literature on potential therapeutic effects of CBD in PD and discuss clinical and preclinical evidence supporting the putative neuroprotective mechanisms of CBD. We searched MEDLINE (via PubMed) for indexed articles published in English from inception to 2019. The following keywords were used: cannabis; cannabidiol and neuroprotection; endocannabinoids and basal ganglia; Parkinson's animal models; Parkinson's history; Parkinson's and cannabidiol. Few studies addressed the biological bases for the purported effects of CBD on PD. Six preclinical studies showed neuroprotective effects, while three targeted the antidyskinetic effects of CBD. Three human studies have tested CBD in patients with PD: an open-label study, a case series, and a randomized controlled trial. These studies reported therapeutic effects of CBD on non-motor symptoms. Additional research is needed to elucidate the potential effectiveness of CBD in PD and the underlying mechanisms involved.

UV-photofunctionalization of a biomimetic coating for dental implants application.

Photofunctionalization mediated by ultraviolet (UV) rays changes the physico-chemical characteristics of titanium (Ti) and improves the biological activity of dental implants. However, the role of UV-mediated photofunctionalization of biofunctional Ti surfaces on the antimicrobial and photocatalytic activity remains unknown and was investigated in this study. Commercially pure titanium (cpTi) discs were divided into four groups: (1) machined samples without UV light application [cpTi UV-]; (2) plasma electrolytic oxidation (PEO) treated samples without UV light application [PEO UV-]; (3) machined samples with UV light application [cpTi UV+]; and (4) PEO-treated samples with UV light application [PEO UV+]. The surfaces were characterized according to their morphology, roughness, crystalline phase, chemical composition and wettability. The photocatalytic activity and proteins adsorption were measured. For the microbiological assay, Streptococcus sanguinis was grown on the disc surfaces for 1 h and 6 h, and the colony forming units and bacterial organization were evaluated. In addition, to confirm the non-cytotoxic effect of PEO UV +, human gingival fibroblast (HGF) cells were cultured in a monolayer onto each material surface and the cells viability and proliferation evaluated by a fluorescent cell staining method. PEO treatment increased the Ti surface roughness and wettability (p < 0.05). Photofunctionalization reduced the hydrocarbon concentration and enhanced human blood plasma proteins and albumin adsorption mainly for the PEO-treated surface (p < 0.05). PEO UV+ also maintained higher wettability values for a longer period and provided microbial reduction at 1 h of bacterial adhesion (p = 0.012 vs. PEO UV-). Photofunctionalization did not increase the photocatalytic activity of Ti (p > 0.05). Confocal microscopy analyses demonstrated that PEO UV+ had no cell damage effect on HGF cells growth even after 24 h of incubation. The photofunctionalization of a biofunctional PEO coating seems to be a promising alternative for dental implants as it increases blood plasma proteins adsorption, reduces initial bacterial adhesion and presents no cytotoxicity effect.

Biological bases for a possible effect of cannabidiol in Parkinson's disease.

Current pharmacotherapy of Parkinson's disease (PD) is palliative and unable to modify the progression of neurodegeneration. Treatments that can improve patients' quality of life with fewer side effects are needed, but not yet available. Cannabidiol (CBD), the major non-psychotomimetic constituent of cannabis, has received considerable research attention in the last decade. In this context, we aimed to critically review the literature on potential therapeutic effects of CBD in PD and discuss clinical and preclinical evidence supporting the putative neuroprotective mechanisms of CBD. We searched MEDLINE (via PubMed) for indexed articles published in English from inception to 2019. The following keywords were used: cannabis; cannabidiol and neuroprotection; endocannabinoids and basal ganglia; Parkinson's animal models; Parkinson's history; Parkinson's and cannabidiol. Few studies addressed the biological bases for the purported effects of CBD on PD. Six preclinical studies showed neuroprotective effects, while three targeted the antidyskinetic effects of CBD. Three human studies have tested CBD in patients with PD: an open-label study, a case series, and a randomized controlled trial. These studies reported therapeutic effects of CBD on non-motor symptoms. Additional research is needed to elucidate the potential effectiveness of CBD in PD and the underlying mechanisms involved.

Role of the Plasma Activation Degree on Densification of Organosilicon Films.

The possibility of controlling the density of organosilicon films was investigated by tuning the plasma activation degree without providing extra energy to the structure, as usually reported in the literature. For this purpose, thin films were deposited in plasmas fed with hexamethyldisiloxane/Ar mixtures at a total pressure of 9.5 Pa. The power of the radiofrequency excitation signal, P, ranged from 50 to 300 W to alter the average energy of the plasma species while the electrical configuration was chosen to avoid direct ion bombardment of the growing films. In this way, it was possible to evaluate the effect of P on the film properties. Thickness and deposition rate were derived from profilometry data. X-ray energy dispersive and infrared spectroscopies were, respectively, applied to analyze the chemical composition and molecular structure of the layers. Surface topography and roughness were determined by atomic force microscopy while nanoindentation was used to evaluate the mechanical properties of the films. From electrochemical impedance spectroscopy the total resistance to the flow of electrolyte species was derived. The main alteration observed in the structure with changing P is related to the proportion of the methyl functional which remains connected to the Si backbone. Chain crosslinking and film density are affected by this structural modification induced by homogeneous and heterogeneous plasma reactions. The density increase resulted in a film with hardness comparable to that of the silica and more resistant to the permeation of oxidative species, but preserving the organosilicon nature of the structure.

Exercise training increases GAD65 expression, restores the depressed GABAA receptor function within the PVN and reduces sympathetic modulation in hypertension.

GABAergic inhibitory input within the paraventricular hypothalamic nucleus (PVN) plays a key role in restraining sympathetic outflow. Although experimental evidence has shown depressed GABAA receptor function plus sympathoexcitation in hypertension and augmented GABA levels with reduced sympathetic activity after exercise training (T), the mechanisms underlying T-induced effects remain unclear. Here we investigated in T and sedentary (S) SHR and WKY: (1) time-course changes of hemodynamic parameters and PVN glutamic acid decarboxylase (GAD) isoforms' expression; (2) arterial pressure (AP) and heart rate (HR) responses, sympathetic/parasympathetic modulation of heart and vessels and baroreflex sensitivity to GABAA receptor blockade within the PVN. SHR-S versus WKY-S exhibited higher AP and HR, increased sympathetic reduced parasympathetic modulation, smaller baroreflex sensitivity, and reduced PVN GAD65 immunoreactivity. SHR-T and WKY-T showed prompt maintained increase (2-8 weeks) in GAD65 expression (responsible for GABA vesicular pool synthesis), which occurred simultaneously with HR reduction in SHR-T and preceded MAP fall in SHR-T and resting bradycardia in WKY-T. There was no change in GAD67 expression (mainly involved with GABA metabolic pool). Resting HR in both groups and basal MAP in SHR were negatively correlated with PVN GAD65 expression. Normalized baroreflex sensitivity and autonomic control observed only in SHR-T were due to recovery of GABAA receptor function into the PVN since bicuculline administration abolished these effects. Data indicated that training augments in both groups the expression/activity of GABAergic neurotransmission within presympathetic PVN neurons and restores GABAA receptors' function specifically in the SHR, therefore strengthening GABAergic modulation of sympathetic outflow in hypertension.

Visible-Light-Induced Photocatalytic and Antibacterial Activity of TiO2 Codoped with Nitrogen and Bismuth: New Perspectives to Control Implant-Biofilm-Related Diseases.

Biofilm-associated diseases are one of the main causes of implant failure. Currently, the development of implant surface treatment goes beyond the osseointegration process and focuses on the creation of surfaces with antimicrobial action and with the possibility to be re-activated (i.e., light source activation). Titanium dioxide (TiO2), an excellent photocatalyst used for photocatalytic antibacterial applications, could be a great alternative, but its efficiency is limited to the ultraviolet (UV) range of the electromagnetic spectrum. Since UV radiation has carcinogenic potential, we created a functional TiO2 coating codoped with nitrogen and bismuth via the plasma electrolytic oxidation (PEO) of titanium to achieve an antibacterial effect under visible light with re-activation potential. A complex surface topography was demonstrated by scanning electron microscopy and three-dimensional confocal laser scanning microscopy. Additionally, PEO-treated surfaces showed greater hydrophilicity and albumin adsorption compared to control, untreated titanium. Bismuth incorporation shifted the band gap of TiO2 to the visible region and facilitated higher degradation of methyl orange (MO) in the dark, with a greater reduction in the concentration of MO after visible-light irradiation even after 72 h of aging. These results were consistent with the in vitro antibacterial effect, where samples with nitrogen and bismuth in their composition showed the greatest bacterial reduction after 24 h of dual-species biofilm formation ( Streptococcus sanguinis and Actinomyces naeslundii) in darkness with a superior effect at 30 min of visible-light irradiation. In addition, such a coating presents reusable photocatalytic potential and good biocompatibility by presenting a noncytotoxicity effect on human gingival fibroblast cells. Therefore, nitrogen and bismuth incorporation into TiO2 via PEO can be considered a promising alternative for dental implant application with antibacterial properties in darkness, with a stronger effect after visible-light application.

Antimicrobial stewardship through telemedicine and its impact on multi-drug resistance.

INTRODUCTION: Telemedicine technologies are increasingly being incorporated into infectious disease practice. We aimed to demonstrate the impact of antimicrobial stewardship through telemedicine on bacterial resistance rates. METHODS: We conducted a quasi-experimental study in a 220-bed hospital in southern Brazil. An antimicrobial stewardship program incorporating the use of telemedicine was implemented. Resistance and antimicrobial consumption rates were determined and analysed using a segmented regression model. RESULTS: After the intervention, the rate of appropriate antimicrobial prescription increased from 51.4% at baseline to 81.4%. Significant reductions in the consumption of fluoroquinolones (level change, ß = -0.80; P < 0.01; trend change, ß = -0.01; P = 0.98), first-generation cephalosporins (level change, ß = -0.91; P < 0.01; trend change, ß = +0.01; P = 0.96), vancomycin (level change, ß = -0.47; P = 0.04; trend change, ß = +0.17; P = 0.66) and polymyxins (level change, ß = -0.15; P = 0.56; trend change, ß = -1.75; P < 0.01) were identified. There was an increase in the consumption of amoxicillin + clavulanate (level change, ß = +0.84; P < 0.01; trend change, ß = +0.14; P = 0.41) and cefuroxime (level change, ß = +0.21; P = 0.17; trend change, ß = +0.66; P = 0.02). A significant decrease in the rate of carbapenem-resistant Acinetobacter spp. isolation (level change, ß = +0.66; P = 0.01; trend change, ß = -1.26; P < 0.01) was observed. CONCLUSIONS: Telemedicine, which provides a tool for decision support and immediate access to experienced specialists, can promote better antibiotic selection and reductions in bacterial resistance.

Characterization of chemically treated Ti-Zr system alloys for dental implant application.

Materials and surfaces developed for dental implants need to withstand degradation processes that take place in the oral cavity. Therefore, the aim of the study was to develop and evaluate the topographical, mechanical, chemical, electrochemical and biological properties of Ti-xZr alloys (x = 5, 10, and 15 wt%) with two surface features (machined and double acid etched). Commercially pure titanium (cpTi) and Ti-6Al-4V alloy were used as controls. Surface characterization was performed using dispersive energy spectroscopy, X-ray diffraction, scanning electron microscopy, atomic force microscopy, profilometry and surface energy. The mechanical properties were assessed using Vickers microhardness, elastic modulus and stiffness. The electrochemical behavior analysis was conducted in a body fluid solution (pH 7.4). In addition, MC3T3-E1 cells were used to determine the impact of material and surface treatment on cell morphology by SEM analysis. Data were analyzed by two-way ANOVA and Bonferroni test (α = 0.05). Ti-Zr alloys showed lower surface roughness, elastic modulus and stiffness, as well as higher hardness and surface energy when compared to cpTi. Ti-Zr system increased the polarization resistance values and significantly decreased the capacitance, corrosion current density (icorr), and passivation current density (ipass) values. The acid treatment increased the resistance and corrosion potential of the oxide layer. SEM data analysis demonstrated that Ti-Zr alloys displayed normal cell attachment/spreading and slightly changed cell morphology in the double etched surface. In conclusion, Zr addition and surface treatment altered surface, mechanical, biological and electrochemical properties of Ti material.

Characterisation of a new plasma-enhanced film to improve shear bond strength between zirconia and veneering ceramic.

The aim of this study was to develop and characterise a new plasma-enhanced chemical vapor deposition (PECVD) film for improving shear bond strength (SBS) between yttria-stabilised tetragonal zirconia (Y-TZP) and veneering ceramic. In total, 192 Y-TZP samples (13 × 5.4 × 5 mm) were divided into 6 groups: control - no treatment (C), airborne-particle abrasion with 27 µm aluminum oxide particles (Al27), 110 µm aluminum oxide particles (Al110), and 250 µm aluminum oxide particles (Al250), application of liner for zirconia (L) and the PECVD film application (P). The Y-TZP surface was characterised by means of Scanning Electronic Microscopy (SEM), Energy-dispersive Spectroscopy (EDS), atomic force microscopy (AFM), surface profilometry and surface-free energy (SFE). SBS between Y-TZP and veneering ceramic was tested before and after thermocycling (20,000 cycles of 5 and 55 °C), and failure mode was also evaluated. Data were analysed by ANOVA and Tukey's HSD test (α = 0.05). Data analysis showed that PECVD film had no effect on surface roughness of Y-TZP (p > 0.05 vs control), whilst the other groups presented higher roughness values (p < 0.05). All treatments increased SFE, except the Al27 group. The highest SBS was presented by the P group (p < 0.05), and values were similar to those of the Al27 group (p = 0.107). Mixed failures were prevalent in all groups, and premature failures were found only in Al groups after thermocycling. Whilst PECVD treatment did not affect Y-TZP surface roughness, high SBS between Y-TZP and the veneering layer was observed. Therefore, PECVD treatment is a promising alternative to improve the performance of bi-layer zirconia-based restorations.

Medial prefrontal cortex TRPV1 and CB1 receptors modulate cardiac baroreflex activity by regulating the NMDA receptor/nitric oxide pathway.

The ventral medial prefrontal cortex (vMPFC) facilitates the cardiac baroreflex response through N-methyl-D-aspartate (NMDA) receptor activation and nitric oxide (NO) formation by neuronal NO synthase (nNOS) and soluble guanylate cyclase (sGC) triggering. Glutamatergic transmission is modulated by the cannabinoid receptor type 1 (CB1) and transient receptor potential vanilloid type 1 (TRPV1) receptors, which may inhibit or stimulate glutamate release in the brain, respectively. Interestingly, vMPFC CB1 receptors decrease cardiac baroreflex responses, while TRPV1 channels facilitate them. Therefore, the hypothesis of the present study is that the vMPFC NMDA/NO pathway is regulated by both CB1 and TRPV1 receptors in the modulation of cardiac baroreflex activity. In order to test this assumption, we used male Wistar rats that had stainless steel guide cannulae bilaterally implanted in the vMPFC. Subsequently, a catheter was inserted into the femoral artery, for cardiovascular recordings, and into the femoral vein for assessing baroreflex activation. The increase in tachycardic and bradycardic responses observed after the microinjection of a CB1 receptors antagonist into the vMPFC was prevented by an NMDA antagonist as well as by the nNOS and sGC inhibition. NO extracellular scavenging also abolished these responses. These same pharmacological manipulations inhibited cardiac reflex enhancement induced by TRPV1 agonist injection into the area. Based on these results, we conclude that vMPFC CB1 and TRPV1 receptors inhibit or facilitate the cardiac baroreflex activity by stimulating or blocking the NMDA activation and NO synthesis.

Neuroreflex control of cardiovascular function is impaired after acute poisoning with chlorpyrifos, an organophosphorus insecticide: Possible short and long term clinical implications.

Although it is well-established that severe poisoning by organophosphorus (OP) compounds strongly affects the cardiorespiratory system, the effects of sub-lethal exposure to these compounds on the neural control of cardiovascular function are poorly explored. The aim of this study was to evaluate the effects of acute sub-lethal exposure to chlorpyrifos (CPF), a commonly used OP insecticide, on three basic reflex mechanisms involved in blood pressure regulation, the peripheral chemoreflex, the baroreflex and the Bezold-Jarisch reflex. Adult male Wistar rats were injected intraperitoneally with a single dose of CPF (30 mg/kg) or saline (0.9%). 24 h after injections, cardiovascular reflexes were tested in awake rats. Potassium cyanide (KCN) and phenylbiguanide (PBG) were injected intravenously to activate the chemoreflex and the Bezold-Jarisch reflex, respectively. The baroreflex was activated by phenylephrine and sodium nitroprusside infusions. Blood samples were taken for measurements of butyrylcholinesterase (BChE) activity while acetylcholinesterase (AChE) activity was measured in brainstem samples. Animals treated with CPF presented signs of intoxication such as ataxia, tremor, lacrimation, salivation, tetany, urination and defecation. The hypertensive and the bradycardic responses of the chemoreflex as well as the hypotensive and bradycardic responses of the Bezold-Jarisch reflex were attenuated in CPF treated animals (P < 0.05). Concerning the baroreflex responses, CPF treatment reduced the bradycardia plateau, the range and the gain of the reflex (P < 0.05). Plasma BChE and brainstem AChE were both reduced significantly after CPF treatment (P < 0.05). Our results showed that acute sub-lethal exposure to CPF impairs the cardiovascular responses of homeostatic and defensive cardiovascular reflexes. These effects are associated with a marked inhibition of plasma BChE and brainstem AChE.

Development of binary and ternary titanium alloys for dental implants.

OBJECTIVE: The aim of this study was to develop binary and ternary titanium (Ti) alloys containing zirconium (Zr) and niobium (Nb) and to characterize them in terms of microstructural, mechanical, chemical, electrochemical, and biological properties. METHODS: The experimental alloys - (in wt%) Ti-5Zr, Ti-10Zr, Ti-35Nb-5Zr, and Ti-35Nb-10Zr - were fabricated from pure metals. Commercially pure titanium (cpTi) and Ti-6Al-4V were used as controls. Microstructural analysis was performed by means of X-ray diffraction and scanning electron microscopy. Vickers microhardness, elastic modulus, dispersive energy spectroscopy, X-ray excited photoelectron spectroscopy, atomic force microscopy, surface roughness, and surface free energy were evaluated. The electrochemical behavior analysis was conducted in a body fluid solution (pH 7.4). The albumin adsorption was measured by the bicinchoninic acid method. Data were evaluated through one-way ANOVA and the Tukey test (α=0.05). RESULTS: The alloying elements proved to modify the alloy microstructure and to enhance the mechanical properties, improving the hardness and decreasing the elastic modulus of the binary and ternary alloys, respectively. Ti-Zr alloys displayed greater electrochemical stability relative to that of controls, presenting higher polarization resistance and lower capacitance. The experimental alloys were not detrimental to albumin adsorption. SIGNIFICANCE: The experimental alloys are suitable options for dental implant manufacturing, particularly the binary system, which showed a better combination of mechanical and electrochemical properties without the presence of toxic elements.