Assessment of chitosan-based adsorbents for glyphosate removal.

Exposure to glyphosate produces various toxic effects, due to this, different methods have been evaluated for its elimination. The objective of this work was to formulate chitosan-based adsorbents and evaluate their efficiency in the removal of glyphosate in vitro. Four films were made by varying the weight ratio of silica/chitosan particles, and four sponges were made by varying the chitosan/chitosan ratio in a reticulated manner. Both adsorbents were characterized based on their porosity, water absorption, glyphosate removal, and reusability. It was found that increasing the porosity in both films and sponges resulted in an increase in the adsorption efficiency of glyphosate. The adsorption process exhibited a better fit in both adsorbents to the pseudo-second-order model. The adsorption of glyphosate to the films fit better with the Langmuir model, demonstrating that the process occurs in the form of a monolayer. In the case of sponges, the adsorption of glyphosate fit better with the Freundlich model, indicating that the process takes place in a multilayer form. Finally, when the reusability was evaluated, the adsorbents showed a loss of effectiveness. However, they still proved to be an efficient alternative for the removal of glyphosate in water, providing a cost-effective and environmentally friendly solution.

Across plane ionic conductivity of highly oriented neodymium doped ceria thin films.

A methodology to limit interfacial effects in thin films is proposed and explained. The strategy is to reduce the impact of the electrode interfaces and eliminate cross grain boundaries that impede ionic motion. To this end, highly oriented Nd0.1Ce0.9O2-δ (NDC) nanocrystalline thin films were grown using pulsed laser deposition (PLD) on platinized single crystal a-plane sapphire substrates. High resolution cross-sectional transmission electron microscopy (HR-XTEM), scanning electron microscopy (SEM) and X-ray diffraction (XRD) verified the films were textured with columnar grains. The average widths of the columns were approximately 40 nm and not significantly changed by film thickness between 100 and 300 nm. HR-XTEM and XRD determined the {111} planes of NDC were grown preferentially on top of the {111} planes of platinum despite the large lattice mismatch between the two planes. From the XRD patterns, the out of plane strains on the platinum and NDC layers were less than 1%. This can be explained by the coincident site lattice (CSL) theory. Rotating the {111} ceria planes 19.11° with respect to the {111} platinum planes forms a Σ7 boundary where 1 in 7 cerium lattice sites are coincident with the platinum lattice sites. This orientation lowers interfacial energy promoting the preferential alignment of those two planes. The across plane ionic conductivity was measured at low temperatures (<350 °C) for the various film thicknesses. It is here shown that columnar grain growth of ceria can be induced on platinized substrates allowing pathways that are clear of blocking grain boundaries that cause conductivities to diminish as film thickness decreases.

Preparation of betulinic acid nanoemulsions stabilized by ω-3 enriched phosphatidylcholine.

Bioactive compounds such as ω-3 fatty acids and terpenes, have been associated with beneficial health effects; however, their solubility in the gastrointestinal tract and its bioavailability in the body are low. Nanoemulsions offer a viable alternative to disperse lipophilic compounds and improve their dissolution, permeation, absorption and bioavailability. Enzyme modified phosphatidylcholine (PC) with ω-3 fatty acids was used as emulsifier to stabilize oil-in-water nanoemulsions generated using ultrasound device. These systems were used as carriers of betulinic acid, which has reported anti-carcinogenic activity. Phospholipase-catalyzed modification of PC allowed the incorporation of 50 mol% of ω-3 fatty acids. Formation variables such as oil type and ultrasound amplitude had effects on nanoemulsion characteristics. Incorporation of betulinic acid affected globule size; however, betulinic acid nanoemulsions below 200 nm could be prepared. The conditions under which betulinic acid nanoemulsions were obtained using the modified phosphatidylcholine with the smaller globule size (91 nm) were 10% PC, 25% glycerol, medium chain oil and 30% amplitude for 12 min in the sonicator. Storage temperature had an effect on the stability of the nanoemulsions, at 5°C we observed the smallest growth in globule size. The use of olive oil decreased the globule size growth during storage of the nanoemulsion stabilized with modified phosphatidylcholine, although globule size obtained was greater than 200 nm. Medium pH had a significant effect on the nanoemulsions; alkaline pH values improved storage stability. These results provide useful information for using this type of carrier system on the formulation of products in the pharmaceutical or food industry.