Disinfection of Bacteria in Aerosols by Applying High Voltage to Stranded Wire Electrodes.

The inactivation of airborne pathogenic microorganisms is crucial to attenuate the dissemination of infectious diseases induced by airborne pathogens. Conventional air disinfection methodologies, such as ultraviolet (UV) irradiation and ozone treatment, have demonstrated limited efficacy. Consequently, we investigated the potential of employing pulsed voltages to effectively eradicate bacteria within aerosols. Our inquiry revealed that the bacterial disinfection rate increased proportionally with elevated applied voltage and frequency. For instance, when a pulsed voltage of 20 kV and a frequency of 500 Hz were applied, a substantial disinfection rate exceeding 6.0 logarithmic units was attained. Furthermore, with the utilization of the stranded wire anodes, the disinfection intensity could be augmented by up to 2.0 logarithmic units compared with the solid wire configuration. Through the utilization of a stranded wire electrode model, we scrutinized the electric field encompassing the electrode, revealing a non-uniform electric field with the stranded wire electrode. This observation indicated an amplified bacterial disinfection effect, aligning with our experimental outcomes. These findings significantly enhance our comprehension of efficacious approaches to electrically disinfecting airborne bacteria.

Control of Aliivibrio fischeri Luminescence and Decrease in Bioluminescence by Fungicides.

Studies have reported that cell density, ultraviolet (UV) irradiation, and redox reactions, can induce bioluminescence in bacteria. Conversely, the relationship between seawater components and luminescence is not well understood. The efficacy of marine luminous bacteria as biosensors, and their reactivity to fungicides (for example postharvest pesticides) are also unknown. Therefore, we studied the relationship between the luminescence of Aliivibrio fischeri and the composition of artificial seawater media and analyzed the toxicity of fungicides using A. fischeri grown only with the elements essential to induce luminescence. Luminescence was activated in the presence of KCl, NaHCO3, and MgSO4. In addition, we cultivated A. fischeri with other compounds, including K+, HCO3-, and SO42- ions. These results suggested that A. fischeri requires K+, HCO3-, and SO42- ions to activate cell density-independent luminescence. Additionally, A. fischeri cultured in 2.81% NaCl solutions containing KCl, NaHCO3, and MgSO4 exhibited a decrease in luminescence in the presence of sodium orthophenylphenol at >10 ppm. This result suggests that A. fischeri can be used as a biosensor to detect the presence of sodium ortho-phenylphenol.

Influence of cations and anions on the induction of cell density-independent luminescence in Photorhabdus luminescens.

Bioluminescence is emitted by various living organisms, including bacteria. While the induction mechanism in marine luminescent bacteria, such as Vibrio fischeri and V. harveyi, has been well characterized, this mechanism has not been studied in detail in the non-marine luminescent bacterium Photorhabdus luminescens. Therefore, we investigated the effect of cations and anions on the induction of luminescence by P. luminescens. Cultivation of cells in an inorganic salts solution (ISS) containing KCl, CaCl2 , MgCl2 , NaHCO3 , and MgSO4 resulted in a rapid increase in luminescence intensity. Moreover, the induction of luminescence in the ISS medium was not dependent on cell density, since cell densities remained unchanged during 48 h. Furthermore, we found that compounds containing K(+) , Mg(2+) , and HCO3(-) were necessary to induce cell density-independent luminescence. The intensity of luminescence per cell cultured in medium containing KCl, MgCl2 , and NaHCO3 was approximately 100-fold higher than that cultured in NB. In contrast, when cells actively grew in normal growth condition, the intensity of luminescence per cell was not increased even in the presence of K(+) , Mg(2+) , and HCO3(-) . Thus, these results suggest that the luminescence of P. luminescens is regulated by 2 independent cell density-dependent and -independent mechanisms.

Selenium cannot substitute for sulfur in cell density-independent bioluminescence in Vibrio fischeri.

It has been proposed that selenium, an element chemically similar to sulfur, can participate in some of the same biological pathways as sulfur, although only a few studies have been confirmed this. In this study, we investigated the relationship between selenium and sulfur-dependent luminescence in Vibrio fischeri. The luminescence of V. fischeri was induced by the addition of sulfur-containing compounds such as Na2SO4 and L-cystine, and their luminescence was suppressed, in a dose-dependent manner, by the addition of the selenium-containing compounds Na2SeO4 and L-selenocystine. Since the viability of V. fischeri was not affected by the addition of low concentration of selenium-containing compounds, the decrease in luminescence intensity cannot be explained by cell death. Kinetic analysis performed using Lineweaver-Burk plots demonstrate that Na2SeO4 and L-selenocystine act as competitive suppressors in inorganic sulfur (Na2SeO4)-dependent luminescence. In contrast, these selenium-containing compounds act as uncompetitive suppressors in organic sulfur (L-cystine)-dependent luminescence.