Reversible Electrochromic/Electrofluorochromic Dual Switching in Zn(II)-Based Metallo-Supramolecular Polymer Films.

The introduction of novel materials with multifunctional chromogenic properties, such as electrochromic/electrofluorochromic (EC/EFC) properties, has recently attracted prospective interest in the development of various optoelectronic devices and smart windows. In this study, a novel Zn(II)-based metallo-supramolecular polymer (polyZn) has been developed as an ON/OFF switchable EFC application with prominent EC behavior. In this regard, the polymeric chain of polyZn was first synthesized by 1:1 complexation in a zigzag manner with Zn(II) ions at the metal center and 4,4'-[bis(2,2':6',2″-terpyridinyl)benzene]triphenylamine (LTPY-TPA) as the redox-active ditopic ligand. The polyZn exhibits excellent solubility in organic solvents and can form a very good uniform thin film on an indium tin oxide/glass substrate by spin-coating. In a neutral state, transparent polyZn exhibits a bright yellow color to the naked eye (absorption at ∼325 nm). The electroactive triphenylamine (TPA) core of LTPA-TPY, however, undergoes reversible single-electron oxidation when a positive bias of +1.6 V vs Ag/Ag+ is applied, generating radical cations (TPA ↔ TPA•+) with a significant drop in transparency (77%). A noticeable chromic shift in the hue of the film from brilliant yellow to green was observed with the appearance of a near-infrared absorption band at ∼897 nm with a tail of 1300-1600 nm. Interestingly, in addition to this EC phenomenon, the fabricated solid-state polyZn film exhibits intense, high-contrast reddish-orange photoluminescence with λem = 650 nm, which is significantly desired as a molecular probe for bioimaging. Both the TPA core and the redox-inactive Zn(II)-terpyridine core emit orange-red photoluminescence in polyZn, which is significantly quenched upon the oxidation of the film and is re-emitted at 0.0 V vs Ag/Ag+. This ON/OFF EFC transition was sustained for several cycles. This study should motivate to design and create distinctive new unique materials with combined EC/EFC behavior for the fabrication of optoelectronic devices by combining a metal-fluorescent core with a redox-active spacer.

Ru(II)-Based Metallo-Supramolecular Polymer with Tetrakis(N-methylbenzimidazolyl)bipyridine for a Durable, Nonvolatile, and Electrochromic Device Driven at 0.6 V.

Low-voltage operation, high durability, and long memory time are demanded for electrochromic (EC) display device applications. Metallo-supramolecular polymers (MSPs), composed of a metal ion and ditopic ligand, are one of the recently developed EC materials, and the ligand modification is expected to tune the redox potential of MSP. In order to lower the redox potential of MSP, tetrakis(N-methylbenzimidazolyl)bipyridine (LBip) was designed as an electronically rich ligand. Ru-based MSP (polyRu-LBip) was successfully synthesized by 1:1 complexation of RuCl2(DMSO)4 with LBip. The molecular weight (Mw) was high (8.8 × 106 Da) enough to provide a simple 1H NMR spectrum, of which the proton peaks could be assigned by the comparison with the spectrum of the corresponding mono-Ru complex. The redox potential (E1/2) between Ru(II/III) was 0.51 V versus Ag/Ag+, which was much lower than the redox potential of previously reported Ru-based MSP with bis(terpyridyl)benzene (0.95 V vs Ag/Ag+). The polymer film exhibited reversible, distinct color changes between violet and light green-yellow upon applying very low potentials of 0 and 0.6 V vs Ag/Ag+, respectively. The appearance and disappearance of the metal-to-ligand charge transfer absorption by the electrochemical redox between Ru(II/III) were confirmed using in situ spectro-electrochemical measurement. A solid-state EC device with polyRu-LBip was revealed to have large optical contrast (ΔT 54%), fast response time (1.37 s for bleaching and 0.67 s for coloration), remarkable coloration efficiency (571 cm2/C), and high durability for the repeated color changes more than 20,000 cycles. The device also showed a long optical memory time of up to 19 h to maintain 40% to the initial contrast under the open circuit conditions. It is considered that the stabilization of the Ru(III) state by LBip suppressed the self-coloring to Ru(II) inside the device.

Stepwise introduction of three different transition metals in metallo-supramolecular polymer for quad-color electrochromism.

Metallo-supramolecular polymers (MSPs) show unique electrochemical and optical properties, that are different to organic polymers, caused by electronic interactions between metals and ligands. For the development of quad-color electrochromic materials, here we report the stepwise introduction of three different transition metal ions into an MSP, utilizing the different complexation abilities of the transition metals. An MSP with Os(II), Ru(II), and Fe(II) (polyOsRuFe) was synthesized via a stepwise synthetic route through the formation of an Os(II) complex first, followed by the introduction of Ru(II) to the Os(II) complex, and finally the attachment of Fe(II) to the Os(II)-Ru(II) complex to produce the polymer. This synthetic procedure was extended to fabricate MSPs that comprised Co(II)/Ru(II)/Os(II) and Zn(II)/Ru(II)/Os(II). The synthesized MSPs showed a broad optical and electrochemical window due to the coupling of three heterometallic segments into the polymer. Introducing acetate anion as the counter anion greatly enhanced the solubility of polyOsRuFe in methanol. A thin film of polyOsRuFe was prepared on ITO/glass by spin-coating the methanol solution, and its reversible quad-color electrochromism was demonstrated.

Dual-Redox System of Metallo-Supramolecular Polymers for Visible-to-Near-IR Modulable Electrochromism and Durable Device Fabrication.

Dual-redox metallo-supramolecular polymers with a zigzag structure (polyFe-N and polyRu-N) were successfully synthesized by 1:1 complexation of a redox-active Fe(II) or Ru(II) ion and 4,4-bis(2,2:6,2-terpyridinyl)phenyl-triphenylamine (LTPA) as a redox-active ligand. The polymers had high solubility in methanol, and the polymer solutions showed dark brown (polyFe-N) or orange-red (polyRu-N) coloration. UV-vis spectra of the polymers displayed a strong metal-to-ligand charge transfer (MLCT) absorption in the visible region. Cyclic voltammograms of the polymer films exhibited two pairs of reversible redox waves. The first redox at ∼0.5 V versus Ag/Ag+ was assigned to the redox in the triphenylamine (TPA) moiety of LTPA, and the second redox at 0.8 V versus Ag/Ag+ (polyFe-N) or 0.9 V versus Ag/Ag+ (polyRu-N) was given to the redox of Fe(II)/(III) or Ru(II)/(III), respectively. Upon applying a positive potential of more than 0.5 V versus Ag/Ag+ to the polymer films, a new absorption at ∼820 nm in the near-infrared (NIR) region appeared with wide tailing to the longer wavelength. It is considered that the new absorption in the NIR region is caused by the polaron band of the oxidized ligand in the polymers. When the applied potential was increased to 1.0 V versus Ag/Ag+ (polyFe-N) or 1.1 V versus Ag/Ag+ (polyRu-N), the maximum wavelength of the new absorption in the NIR region shifted to 885-900 nm and the absorbance was further enhanced with disappearance of the MLCT absorption. Eventually, the original colors of the polymers were faint to light green. This visible-to-NIR electrochromism was reversible, and maximum optical contrast (ΔT) reached 52% in the visible region and 80% in the NIR region. A prototype solid-state device with the polymer was fabricated for practical utilization, exhibiting excellent cycle stability of >4000 cycles with maintaining high optical contrast from the visible-to-NIR range.

Synthesis of an Alternated Heterobimetallic Supramolecular Polymer Based on Ru(II) and Fe(II).

A heterobimetallic supramolecular polymer (polyRuFe) with alternately complexed Ru(II) and Fe(II) is prepared following a stepwise synthetic route through harnessing first the strongly binding metal ion Ru(II) and then the weakly binding metal ion Fe(II). A high yield of product is achieved in each step. The heterometal ions are incorporated into the polymer chain in identical coordination environments formed by two 2,2':6',2″-terpyridine moieties. Characterization is accomplished by NMR spectroscopy, MALDI-TOF mass spectrometry, UV-Vis spectroscopy, and cyclic voltammetry. PolyRuFe shows a wide optical window (λ = 311-577 nm) and a broad distinct reversible redox nature of two types, originated from the coupling of the two heterometallic segments into the polymer chain. Such characteristics of polyRuFe suggest its potential for various electrochemical and electro-optical applications.

Dual-Branched Dense Hexagonal Fe(II)-Based Coordination Nanosheets with Red-to-Colorless Electrochromism and Durable Device Fabrication.

Highly dense hexagonal Fe(II)-based coordination nanosheets (CONASHs) were designed by dual-branching, at the metal-coordination moieties and the tritopic ligands, which successfully obtained a liquid/liquid interface by the complexation of Fe(II) ions and the tritopic bidentate ligands. The 1:1 complexation was confirmed by titration. The obtained Fe(II)-based nanosheets were fully characterized by small-angle X-ray scattering (SAXS), atomic force microscopy (AFM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and X-ray photoelectron spectroscopy (XPS). A monolayer of the sheets was obtained, employing the Langmuir-Blodgett (LB) method, and the determined thickness was ∼2.5 nm. The polymer nanosheets exhibited red-to-colorless electrochromism because the electrochemical redox transformation between Fe(II) and Fe (III) ions controlled the appearance/disappearance of the metal (ion)-to-ligand charge-transfer (MLCT) absorption. The poor π-conjugation in the tritopic ligands contributed to the highly colorless electrochromic state. A solid-state device, with the robust polymer film, exhibited excellent electrochromic (EC) properties, with high optical contrast (ΔT > 65%) and high durability after repeated color changes for >15 000 cycles, upon applying low-operating voltages (+1.5/0 V).

Constructing Alternated Heterobimetallic [Fe(II)/Os(II)] Supramolecular Polymers with Diverse Solubility for Facile Fabrication of Voltage-Tunable Multicolor Electrochromic Devices.

Metallo-supramolecular polymer (MSP)-based electrochromic devices (ECDs) have drawn much attention because of their variable colors and attractive electrochromic (EC) properties. However, fabrication of voltage-tunable multicolor ECDs using single MSP is yet hard to realize. We anticipated alternate introduction of two different redox-active metal ions in an MSP combined with the adjustment of counteranions could be a solution to fabricate multicolor ECDs. The heterometals will induce color variability upon voltage alteration, and counteranions will help to tune the solubility of MSP in different solvents. In an attempt to fulfill this target, we have synthesized four heterobimetallic supramolecular polymers (HBPs) having different counteranions (BF4-, Cl-, PF6-, and OAc-), in which Fe(II) and Os(II) are alternately complexed by two terpyridine units. To apply as EC material, the HBPs should be soluble in methanol and insoluble in acetonitrile for the preparation of EC film as well as ECDs. However, among the HBPs, only HBP-OAc is found to meet this requirement. The EC behaviors of the spray-coating film of HBP-OAc on an indium tin oxide (ITO)-coated glass substrate are investigated in terms of maximum transmittance contrast, coloration voltage, response time, coloration efficiency, and operational stability, which exhibits reversible multicolor electrochromism (the initial purple color of the film is changed to violet followed by greenish-yellow) upon alteration of the voltage from 0.0 to 0.7 V [required to oxidize the Os(II) ion] and to 1.0 V [required to oxidize the Fe(II) ion]. The film is also integrated into a laminated ECD by using lithium-based gel electrolyte. Finally, as a proof-of-concept, a prototype voltage-tunable multicolor EC display (6 cm × 2.5 cm) is fabricated by using a designed image containing a flower, leaves, and a flower pot, which exhibits six different types of multicolor image upon application of tunable voltages.

Reversible four-color electrochromism triggered by the electrochemical multi-step redox of Cr-based metallo-supramolecular polymers.

Four color electrochromism (yellow, magenta, blue, and navy) has been achieved in Cr(iii)-based metallo-supramolecular polymers (polyCr), which were synthesized by 1 : 1 complexation of Cr ions and 1,4-di[[2,2':6',2''-terpyridin]-4'-yl]benzene (L). The polymer structure was determined by X-ray absorption fine structure (XAFS) measurement and X-ray photoelectron spectroscopy (XPS). The molecular weight of polyCr was calculated as 3.2 × 107 Da using right angle light scattering (RALS). The EXAFS fitting indicated that the bond distances of Cr-N are 2.020 Å and 2.208 Å. A film of polyCr shows multi-color electrochromism (EC) or absorption: a sharp peak at 380 nm at 0 V vs. Ag/Ag+ (yellow), a sharp peak at 510 nm and a broad peak at 800 nm at -0.6 V vs. Ag/Ag+ (magenta), a broad peak at 610 nm and between 700-900 nm at -1.2 V vs. Ag/Ag+ (blue), a broad peak between 450-900 nm at -1.8 V vs. Ag/Ag+ (navy). The transmittances change (ΔT), the switching times for coloring and bleaching (T c, T b) and the coloration efficiency (η c, η b): [ΔT, (T c, T b), (η c, η b)] were [39.2%, (5.56 s, 1.39 s), (169 cm2 C-1, 230 cm2 C-1)] at 510 nm between -0.6 and 0.2 V vs. Ag/Ag+, [67.0%, (6.93 s, 2.52 s), (138 cm2 C-1, 172 cm2 C-1)] at 610 nm between -1.2 and 0.2 V vs. Ag/Ag+, [86.1%, (6.80 s, 3.03 s), (167 cm2 C-1, 134 cm2 C-1)] at 780 nm between -1.8 and 0.2 V vs. Ag/Ag+, respectively, during the cycles. The durability experiment indicates that polyCr shows an EC property for at least 100 cycles.

Precise Synthesis of Alternate Fe(II)/Os(II)-Based Bimetallic Metallo-Supramolecular Polymer.

A novel terpyridine-based bimetallic metallo-supramolecular polymer (polyFeOs) containing alternately complexed Fe(II) and Os(II) ions is synthesized. For precise synthesis of the polymer, a new three-step synthetic pathway is developed to obtain a high yield (%) of product in each step. The first step is the synthesis of dibromo terpyridine-Os(II) complex in 87% yield, the second step is the synthesis of bisterpyridine ligand containing Os(II) (OsL1) in 74% yield, and the last step is the synthesis of polyFeOs in 90% yield. The polyFeOs exhibits high thermal stability with two degradation temperatures at around 390 and 690 °C, which indicate thermal evaporation of the counter anions (Cl- and BF4 - ) and degradation of the coordination bonds, respectively. The combination of two different metal ions in polyFeOs results in an enlarged optical window (λ = 315-675 nm) and two highly stable reversible redox states, which can be of huge interest for potential optical, electro-optical, and electrochemical applications.

Modulation of a coordination structure in a europium(iii)-based metallo-supramolecular polymer for high proton conduction.

Developing high proton conducting solid materials is significant in the field of fuel cells. A europium(iii)-based metallo-supramolecular polymer with uncoordinated carboxylic acids (PolyEu-H) was successfully synthesized by modifying the synthesis conditions. The proton conductivity was enhanced with increasing the relative humidity (RH) from 30 to 95% RH. PolyEu-H showed about 104 times higher proton conductivity than the polymer with coordinated carboxylic acids (PolyEu) and about 400 times higher than the polymer without carboxylic acids (PolyEu-2). The proton conductivity of PolyEu-H reached 4.45 × 10-2 S cm-1 at 95% RH and 25 °C and 5.6 × 10-2 S cm-1 at 75 °C. The activation energy, E a was ultralow (0.04 eV), which indicates proton conduction based on the Grotthuss mechanism. The results indicate that efficient proton conduction occurs through proton channels formed by moisture in PolyEu-H.

Relationship between developmental dislocation of the hip in infant and acetabular dysplasia at skeletal maturity.

Previous reports demonstrated 8-60% patients treated for developmental dislocation of hip (DDH) in infancy have residual acetabular dysplasia (AD) at skeletal maturity. AD patients reportedly exhibit abnormal morphology of the pelvis, high rates of comorbid spinal congenital anomalies and high bone mineral density. These physical findings suggest that AD patients have genetic background. We examined the percentage of AD patients with hip pain at skeletal maturity having a history of DDH in infancy and the correlation between the severity of AD at skeletal maturity and history of DDH treatment to investigate the relationship between AD and DDH.A total of 245 patients were radiographically examined for any history of DDH treatment in infancy. The study included 226 women and 19 men with a mean age at examination of 40.7 years (range 17-59 years).Eighty-eight patients (36%) had a history of DDH treatment (DDH group) and the remaining 157 patients (64%) had no history of DDH treatment (non-DDH group). The average age was lower and acetabular angle was larger in the DDH group. There was a significant increasing trend of the percentage of DDH patients associated with the severity of AD classified with CE, acetabular angle, and acetabular roof angle.Our data suggest that there are several AD patients without a history of DDH in Japan, and AD in patients without a history of DDH has different characteristics from AD in patients with a history of DDH.