ABSTRACT
A flow injection (FI) methodology using the acidic potassium permanganate (KMnO4 )-rhodamine-B (Rh-B) reaction with chemiluminescence (CL) detection was established to determine acetochlor and cartap-HCl pesticides in freshwater samples. Experimental parameters were optimized, and Chelex-100 cationic exchanger mini column and solid-phase extraction (SPE) were used as phase separation techniques. Linear calibration curves were observed for the standard solutions of acetochlor and cartap-HCl over the ranges 0.005-2.0 mg L-1 [y = 1155.8x + 57.551, R2 = 0.9999 (n = 8)] and 0.005-1.0 mg L-1 [y = 979.76x + 14.491, R2 = 0.9998 (n = 8)] with LODs and LOQs of 7.5 × 10-4 and 8.0 × 10-4 mg L-1 (3σ blank) and 2.5 × 10-3 and 2.7 × 10-3 mg L-1 (10σ blank), respectively, with an injection throughput of 140 h-1 . These methods were used to estimate acetochlor and cartap-HCl with or without the SPE procedure, respectively, in spiked freshwater samples. Results obtained were not significantly different at a 95% confidence level to those of other reported methods. Recoveries for acetochlor and cartap-HCl were obtained over the ranges 93-112% (RSD = 1.9-3.6%) and 98-109% (RSD = 1.7-3.8%), respectively. The most probable CL reaction mechanism was explored.
Subject(s)
Acids , Luminescence , Rhodamines , Potassium Permanganate , Fresh Water , Flow Injection Analysis/methods , Luminescent Measurements/methodsABSTRACT
A novel flow injection-chemiluminescence (FI-CL) approach is proposed for the assay of pioglitazone hydrochloride (PG-HCl) based on its enhancing influence on the tris(2,2'-bipyridyl)ruthenium(II)-silver(III) complex (Ru(bipy)3 2+ -DPA) CL system in sulfuric acid medium. The possible CL reaction mechanism is discussed with CL and ultraviolet (UV) spectra. The optimum experimental conditions were found as: Ru(bipy)3 2+ , 5.0 × 10-5 M; sulfuric acid, 1.0 × 10-3 M; diperiodatoargentate(III) (DPA), 1.0 × 10-4 M; potassium hydroxide, 1.0 × 10-3 M; flow rate 4.0 ml min-1 for each flow stream and sample loop volume, 180 µl. The CL intensity of PG-HCl was linear in the range of 1.0 × 10-3 to 5.0 mg L-1 (R2 = 0.9998, n = 10) with limit of detection [LOD, signal-to-noise ratio (S/N) = 3] of 2.2 × 10-4 mg L-1 , limit of quantification (LOQ, S/N = 10) of 6.7 × 10-4 mg L-1 , relative standard deviation (RSD) of 1.0 to 3.3% and sampling rate of 106 h-1 . The methodology was satisfactorily used to quantify PG-HCl in pharmaceutical tablets with recoveries ranging from 93.17 to 102.77 and RSD from 1.9 to 2.8%.
