ABSTRACT
Design techniques for the vacuum insulation have been developed in order to realize a reliable voltage holding capability of multi-aperture multi-grid (MAMuG) accelerators for fusion application. In this method, the nested multi-stage configuration of the MAMuG accelerator can be uniquely designed to satisfy the target voltage within given boundary conditions. The evaluation of the voltage holding capabilities of each acceleration stages was based on the previous experimental results about the area effect and the multi-aperture effect. Since the multi-grid effect was found to be the extension of the area effect by the total facing area this time, the total voltage holding capability of the multi-stage can be estimated from that per single stage by assuming the stage with the highest electric field, the total facing area, and the total apertures. By applying these consideration, the analysis on the 3-stage MAMuG accelerator for JT-60SA agreed well with the past gap-scan experiments with an accuracy of less than 10% variation, which demonstrated the high reliability to design MAMuG accelerators and also multi-stage high voltage bushings.
ABSTRACT
In order to realize negative ion sources and accelerators to be applicable to International Thermonuclear Experimental Reactor and JT-60 Super Advanced, a large cesium (Cs)-seeded negative ion source and a multi-aperture and multi-stage electric acceleration have been developed at Japan Atomic Energy Agency (JAEA). Long pulse production and acceleration of the negative ion beams have been independently carried out. The long pulse production of the high current beams has achieved 100 s at the beam current of 15 A by modifying the JT-60 negative ion source. The pulse duration time is increased three times longer than that before the modification. As for the acceleration, a pulse duration time has been also extended two orders of magnitudes from 0.4 s to 60 s. The developments of the negative ion source and acceleration at JAEA are well in progress towards the realization of the negative ion sources and accelerators for fusion applications.
ABSTRACT
OBJECTIVE: This study examined temporary restorative resins that use non-phthalate ester plasticizers. METHODS: Three non-phthalate plasticizers were tested: tri-ethyl citrate (TEC), tri-butyl citrate (TBC), and di-butyl sebacate (DBS). The experimental resins were compared with resins that use a phthalate ester plasticizer (di-butyl phthalate, DBP) and commercial products (Dura Seal, Plast Seal, and Fit Seal). For the experimental resins, the ratio of plasticizer to PMMA/MMA resin was varied from 30 to 60% (wt). The mechanical properties of the experimental resins were evaluated using a modified diametral compressive strength and the resistance to explorer insertion. RESULTS: The strengths of the experimental resins with plasticizer concentrations ranging from 40 to 50% (TEC, TBC, and DBP) or from 30 to 40% (DBS), by weight, were equivalent to the strengths of commercial temporary restorative resins. A similar tendency was seen for the resistance to explorer insertion. CONCLUSIONS: The results suggest that new temporary restorative resins can be prepared by choosing the appropriate proportions of resin monomer and non-phthalate ester plasticizer.
