Crystal structure of 6-guanidinohexanoyl trypsin near the optimum pH reveals the acyl-enzyme intermediate to be deacylated.

The force driving the conversion from the acyl intermediate to the tetrahedral intermediate in the deacylation reaction of serine proteases remains unclear. The crystal structure of 6-guanidinohexanoyl trypsin was determined at pH 7.0, near the optimum reaction pH, at 1.94 Å resolution. In this structure, three water molecules are observed around the catalytic site. One acts as a nucleophile to attack the acyl carbonyl carbon while the other two waters fix the position of the catalytic water through a hydrogen bond. When the acyl carbonyl oxygen oscillates thermally, the water assumes an appropriate angle to catalyze the deacylation.

Actin capping protein and its inhibitor CARMIL: how intrinsically disordered regions function.

The actin capping protein (CP) tightly binds to the barbed end of actin filaments to block further elongation. The ß-tentacle in CP is an important region that ensures stable interaction with actin filaments. CARMIL inhibits the interaction of CP with actin filaments via the C-terminal portion containing the CP-binding motif, located in an intrinsically disordered region. We have proposed an allosteric inhibition model in which CARMIL suppresses CP by the population shift mechanism. Here, we solved a crystal structure of CP in complex with a CARMIL-derived peptide, CA32. The new structure clearly represents the α-helical form of the ß-tentacle that was invisible in other CP/CARMIL peptide complex structures. In addition, we exhaustively performed a normal mode analysis with the elastic network model on all available crystal structures of the CP/CARMIL peptide complexes, including the new structure. We concluded that the CP-binding motif is necessary and sufficient for altering the fluctuation of CP, which is essential for attenuating the barbed-end-capping activity along the population shift mechanism. The roles and functions of the ß-tentacle and the CP-binding motif are discussed in terms of their intrinsically disordered nature.

Two distinct mechanisms for actin capping protein regulation--steric and allosteric inhibition.

The actin capping protein (CP) tightly binds to the barbed end of actin filaments, thus playing a key role in actin-based lamellipodial dynamics. V-1 and CARMIL proteins directly bind to CP and inhibit the filament capping activity of CP. V-1 completely inhibits CP from interacting with the barbed end, whereas CARMIL proteins act on the barbed end-bound CP and facilitate its dissociation from the filament (called uncapping activity). Previous studies have revealed the striking functional differences between the two regulators. However, the molecular mechanisms describing how these proteins inhibit CP remains poorly understood. Here we present the crystal structures of CP complexed with V-1 and with peptides derived from the CP-binding motif of CARMIL proteins (CARMIL, CD2AP, and CKIP-1). V-1 directly interacts with the primary actin binding surface of CP, the C-terminal region of the alpha-subunit. Unexpectedly, the structures clearly revealed the conformational flexibility of CP, which can be attributed to a twisting movement between the two domains. CARMIL peptides in an extended conformation interact simultaneously with the two CP domains. In contrast to V-1, the peptides do not directly compete with the barbed end for the binding surface on CP. Biochemical assays revealed that the peptides suppress the interaction between CP and V-1, despite the two inhibitors not competing for the same binding site on CP. Furthermore, a computational analysis using the elastic network model indicates that the interaction of the peptides alters the intrinsic fluctuations of CP. Our results demonstrate that V-1 completely sequesters CP from the barbed end by simple steric hindrance. By contrast, CARMIL proteins allosterically inhibit CP, which appears to be a prerequisite for the uncapping activity. Our data suggest that CARMIL proteins down-regulate CP by affecting its conformational dynamics. This conceptually new mechanism of CP inhibition provides a structural basis for the regulation of the barbed end elongation in cells.

The catalytic efficiency (kcat/Km) of the class A beta-lactamase Toho-1 correlates with the thermal stability of its catalytic intermediate analog.

The extended-spectrum beta-lactamases are associated with antibiotic resistance. Toho-1 R274N/R276N, a Class A beta-lactamase of CTX-M-type, efficiently hydrolyzes first generationcephalosporins (for example, cephalothin), in addition to cefotaxime, a third generation cephalosporin. However, this enzyme only marginally hydrolyzes the third generation cephalosporin ceftazidime, and the monobactam aztreonam. The deacylation defectiveness of the mutant Toho-1 E166A/R274N/R276N, which lacks the deacylation activity, results in the accumulation of the complex of an acylated-enzyme intermediate analog. For drug design, it would be useful if a quantitative prediction of a catalytic property were available without the need of enzymatic measurements. Therefore, we examined whether there is a correlation between the thermal stability of a catalytic intermediate (analog) and its kinetic parameters. First we measured the hydrolytic kinetics of the 14 species of beta-lactam antibiotics by Toho-1 R274N/R276N, and also measured the thermal stability of the accumulated acyl-intermediates of Toho-1 E166A/R274N/R276 by differential scanning calorimetry. Here we report the correlation of these parameters. The logarithm of the catalytic efficiency for Toho-1 R274N/R276N, log(k(cat)/K(m)) exhibited the best linear correlation with T(m,) which is the heat-denaturation temperature midpoint of the corresponding acylated complex of Toho-1 E166A/R274N/R276N. The correlation coefficient was 0.947, indicating that a relationship exists between the kinetic parameters and the stability of the intermediates. The results demonstrate a new method for investigating the catalytic properties of enzymes against any substrates, and a new approach to designing enzymes.

Improvement of crystal quality by surface mutations of beta-lactamase Toho-1.

The beta-lactamase Toho-1 exhibits a strong tendency to form merohedrally twinned crystals. Here, the crystal quality of Toho-1 was improved by using surface modification to remove a sulfate ion involved in crystal packing. The surface-modified Toho-1 variant (R274N/R276N) was crystallized under similar conditions to those used for wild-type Toho-1. R274N/R276N did not form merohedrally twinned crystals. The crystals diffracted to a significantly higher resolution (approximately 0.97 A) than the wild-type crystals (1.65 A); they belonged to the same space group and had almost identical unit-cell parameters to those of wild-type Toho-1.

Crystal structures of the complexes between vancomycin and cell-wall precursor analogs.

The crystal structures of three vancomycin complexes with two vancomycin-sensitive cell-wall precursor analogs (diacetyl-Lys-D-Ala-D-Ala and acetyl-D-Ala-D-Ala) and a vancomycin-resistant cell-wall precursor analog (diacetyl-Lys-D-Ala-D-lactate) were determined at atomic resolutions of 1.80 A, 1.07 A, and 0.93 A, respectively. These structures not only reconfirm the "back-to-back" dimerization of vancomycin monomers and the ligand-binding scheme proposed by previous experiments but also show important structural features of strategies for the generation of new glycopeptide antibiotics. These structural features involve a water-mediated antibiotic-ligand interaction and supramolecular structures such as "side-by-side" arranged dimer-to-dimer structures, in addition to ligand-mediated and "face-to-face" arranged dimer-to-dimer structures. In the diacetyl-Lys-D-Ala-D-lactate complex, the interatomic O...O distance between the carbonyl oxygen of the fourth residue of the antibiotic backbone and the ester oxygen of the D-lactate moiety of the ligand is clearly longer than the corresponding N-H...O hydrogen-bonding distance observed in the two other complexes due to electrostatic repulsion. In addition, two neighboring hydrogen bonds are concomitantly lengthened. These observations provide, at least in part, a molecular basis for the reduced antibacterial activity of vancomycin toward vancomycin-resistant bacteria with cell-wall precursors terminating in -D-Ala-D-lactate.

Crystallization and preliminary X-ray crystallographic analysis of full-length yeast tropomyosin 2 from Saccharomyces cerevisiae.

Tropomyosin is a highly conserved actin-binding protein that is found in most eukaryotic cells. It is critical for actin-filament stabilization and for cooperative regulation of many actin functions. Detailed structural information on tropomyosin is very important in order to understand the mechanisms of its action. Whereas structures of isolated tropomyosin fragments have been obtained at high resolution, the atomic structure of the entire tropomyosin molecule is still unknown. Here, the crystallization and preliminary crystallographic analysis of full-length yeast tropomyosin 2 (yTm2) from Saccharomyces cerevisiae are reported. Recombinant yTm2 expressed in Escherichia coli was crystallized using the hanging-drop vapour-diffusion method. The crystals belonged to space group C2, with unit-cell parameters a = 154.8, b = 49.9, c = 104.0 A, alpha = gamma = 90.0, beta = 124.0 degrees and two molecules in the asymmetric unit. A complete native X-ray diffraction data set was collected to 3.5 A resolution using synchrotron radiation.

Two-crystal structures of tropomyosin C-terminal fragment 176-273: exposure of the hydrophobic core to the solvent destabilizes the tropomyosin molecule.

Tropomyosin (Tm) is a two-stranded alpha-helical coiled-coil protein, and when associated with troponin, it is responsible for the actin filament-based regulation of muscle contraction in vertebrate skeletal and cardiac muscles. It is widely believed that Tm adopts a flexible rod-like structure in which the flexibility must play a crucial role in its functions. To obtain more information about the flexibility of Tm, we solved and compared two crystal structures of the identical C-terminal segments, spanning approximately 40% of the entire length. We also compared these structures with our previously reported crystal structure of an almost identical Tm segment in a distinct crystal form. The parameters specifying the local coiled-coil geometry, such as the separation between two helices and the local helical pitch, undulate along the length of Tm in the same way as among the three crystal structures, indicating that these parameters are defined by the amino acid sequence. In the region of increased separation, around Glu-218 and Gln-263, the hydrophobic core is disrupted by three holes. Moreover, for the first time to our knowledge, for Tm, water molecules have been identified in these holes. In some structures, the B-factors are higher around the holes than in the rest of the molecule. The Tm coiled-coil must be destabilized and therefore may be flexible, not only in the alanine clusters but also in the regions of the broken core. A closer look at the local staggering between the two chains and the local bending revealed that the strain accumulates at the alanine cluster and may be relaxed in the broken core region. Moreover, the strain is distributed over a long range, even when a deformation like bending may occur at a limited number of spots. Thus, Tm should not be regarded as a train of short rigid rods connected by flexible linkers, but rather as a seamless rubber rod patched with relatively more flexible regions.

Molecular structure of the ParM polymer and the mechanism leading to its nucleotide-driven dynamic instability.

ParM is a prokaryotic actin homologue, which ensures even plasmid segregation before bacterial cell division. In vivo, ParM forms a labile filament bundle that is reminiscent of the more complex spindle formed by microtubules partitioning chromosomes in eukaryotic cells. However, little is known about the underlying structural mechanism of DNA segregation by ParM filaments and the accompanying dynamic instability. Our biochemical, TIRF microscopy and high-pressure SAX observations indicate that polymerization and disintegration of ParM filaments is driven by GTP rather than ATP and that ParM acts as a GTP-driven molecular switch similar to a G protein. Image analysis of electron micrographs reveals that the ParM filament is a left-handed helix, opposed to the right-handed actin polymer. Nevertheless, the intersubunit contacts are similar to those of actin. Our atomic model of the ParM-GMPPNP filament, which also fits well to X-ray fibre diffraction patterns from oriented gels, can explain why after nucleotide release, large conformational changes of the protomer lead to a breakage of intra- and interstrand interactions, and thus to the observed disintegration of the ParM filament after DNA segregation.

Single molecule polymerization, annealing and bundling dynamics of SipA induced actin filaments.

Salmonella bacteria cause more than three million deaths each year. They hijack cells and inject among other proteins SipA via a "molecular syringe" into the cell, which can tether actin subunits in opposing strands to form mechanically stabilized filaments which rapidly reshape the cells surface into extended ruffles, leading to bacterial internalization. Exactly how these ruffles form at a single filament level remains unknown. Our real time total internal fluorescence microscopy observations show that both bidirectional elongation of actin by SipA as well as end-to-end annealing of SipA-actin filaments are rapid processes. Complementary electron microscopy investigations demonstrate that crowding agents in vitro readily induce stiff bundles of SipA-actin filaments. Taken together these three effects, rapid SipA induced actin polymerization, filament annealing and bundle formation due to molecular crowding can explain how Salmonella invades cells at molecular level.

Thiol reactivity as a sensor of rotation of the converter in myosin.

Smooth muscle myosin has two reactive thiols located near the C-terminal region of its motor domain, the "converter", which rotates by approximately 70 degrees upon the transition from the "nucleotide-free" state to the "pre-power stroke" state. The incorporation rates of a thiol reagent, 5-(((2-iodoacetyl)amino)ethyl)aminonaphthalene-1-sulfonic acid (IAEDANS), into these thiols were greatly altered by adding ATP or changing the myosin conformation. Comparisons of the myosin structures in the pre-power stroke state and the nucleotide-free state explained why the reactivity of both thiols is especially sensitive to a conformational change around the converter, and thus can be used as a sensor of the rotation of the converter. Modeling of the myosin structure in the pre-power stroke state, in which the most reactive thiol, "SH1", was selectively modified with IAEDANS, revealed that this label becomes an obstacle when the converter completely rotates toward its position in the pre-power stroke state, thus resulting in incomplete rotation of the converter. Therefore, we suggest that the limitation of the converter rotation by modification causes the as-yet unexplained phenomena of SH1-modified myosin, including the inhibition of 10S myosin formation and the losses in phosphorylation-dependent regulation of the basic and actin-activated Mg-ATPase activities of myosin.

Crystal structures of tropomyosin: flexible coiled-coil.

Tropomyosin (Tm) is a 400 angstroms long coiled coil protein, and with troponin it regulates contraction in skeletal and cardiac muscles in a [Ca2+]-dependent manner. Tm consists of multiple domains with diverse stabilities in the coiled coil form, thus providing Tm with dynamic flexibility. This flexibility must play important roles in the actin binding and the cooperative transition between the calcium regulated states of the entire muscle thin filament. In order to understand the flexibility of Tm in its entirety, the atomic coordinates of Tm are needed. Here we report the two crystal structures of Tm segments. One is rabbit skeletal muscle alpha-Tm encompassing residues 176-284 with an N-terminal extension of 25 residues from the leucine zipper sequence of GCN4, which includes the region that interacts with the troponin core domain. The other is alpha-Tm encompassing residues 176-273 with N- and C-terminal extensions of the leucine zipper sequences. These two crystal structures imply that this molecule is a flexible coiled coil. First, Tm's are not homogeneous and smooth coiled coils, but instead they undulate, with highly fluctuating local parameters specifying the coiled coil. Independent fluctuating showed by two crystal structures is important. Second, in the first crystal, the coiled coil is bent by 9 degrees in the region centered about Y214-E218-Y221, where the inter-helical distance has its maximum. On the other hand, no bend is observed at the same region in the second crystal even if its inter-helical distance has also its maximum. E218, an unusual negatively charged residue at the a position in the heptad repeat, seems to play the key role in destabilizing the coiled coil with alanine destabilizing clusters.

A substrate variant as a high-affinity, reversible inhibitor: insight from the X-ray structure of cilastatin bound to membrane dipeptidase.

An analysis of the X-ray structure of cilastatin bound to membrane dipeptidase, together with docking studies, is presented here to reveal how a simple amide may act as a high-affinity, reversible, amidase inhibitor. Cilastatin binds as a normal substrate and is orientated in a perfect near-attack conformer for formation of a tetrahedral intermediate with the zinc-bound water/hydroxide. This intermediate is fated, however, only to revert to its starting components as scission of the amide bond is prevented by the precise fit of cilastatin within the active site. The cilastatin alkyl end groups that are tightly buttressed against amino acid residues on opposite sides of the active site, are aligned along the C-N reaction coordinate axis thereby preventing collapse of the intermediate via rupture of the C-N bond. Such a feature could have more general applicability in the explicit design of substrate variants as selective, tight-binding, and reversible inhibitors.

Crystal structure of the C-terminal half of tropomodulin and structural basis of actin filament pointed-end capping.

Tropomodulin is the unique pointed-end capping protein of the actin-tropomyosin filament. By blocking elongation and depolymerization, tropomodulin regulates the architecture and the dynamics of the filament. Here we report the crystal structure at 1.45-A resolution of the C-terminal half of tropomodulin (C20), the actin-binding moiety of tropomodulin. C20 is a leucine-rich repeat domain, and this is the first actin-associated protein with a leucine-rich repeat. Binding assays suggested that C20 also interacts with the N-terminal fragment, M1-M2-M3, of nebulin. Based on the crystal structure, we propose a model for C20 docking to the actin subunit at the pointed end. Although speculative, the model is consistent with the idea that a tropomodulin molecule competes with an actin subunit for a pointed end. The model also suggests that interactions with tropomyosin, actin, and nebulin are all possible sources of influences on the dynamic properties of pointed-end capping by tropomodulin.

Crystal structure of human renal dipeptidase involved in beta-lactam hydrolysis.

Human renal dipeptidase is a membrane-bound glycoprotein hydrolyzing dipeptides and is involved in hydrolytic metabolism of penem and carbapenem beta-lactam antibiotics. The crystal structures of the saccharide-trimmed enzyme are determined as unliganded and inhibitor-liganded forms. They are informative for designing new antibiotics that are not hydrolyzed by this enzyme. The active site in each of the (alpha/beta)(8) barrel subunits of the homodimeric molecule is composed of binuclear zinc ions bridged by the Glu125 side-chain located at the bottom of the barrel, and it faces toward the microvillar membrane of a kidney tubule. A dipeptidyl moiety of the therapeutically used cilastatin inhibitor is fully accommodated in the active-site pocket, which is small enough for precise recognition of dipeptide substrates. The barrel and active-site architectures utilizing catalytic metal ions exhibit unexpected similarities to those of the murine adenosine deaminase and the catalytic domain of the bacterial urease.