Discriminant Principal Component Analysis of ToF-SIMS Spectra for Deciphering Compositional Differences of MSC-Secreted Extracellular Matrices.

Identifying characteristic extracellular matrix (ECM) variants is a key challenge in mechanistic biology, bioengineering, and medical diagnostics. The reported study demonstrates the potential of time-of-flight secondary ion mass spectrometry (ToF-SIMS) to detect subtle differences between human mesenchymal stromal cell (MSC)-secreted ECM types as induced by exogenous stimulation or emerging pathology. ToF-SIMS spectra of decellularized ECM samples are evaluated by discriminant principal component analysis (DPCA), an advanced multivariate analysis technique, to decipher characteristic compositional features. To establish the approach, signatures of major ECM proteins are determined from samples of pre-defined mixtures. Based on that, sets of ECM variants produced by MSCs in vitro are analyzed. Differences in the content of collagen, fibronectin, and laminin in the ECM resulting from the combined supplementation of MSC cultures with polymers that induce macromolecular crowding and with ascorbic acid are detected from the DPCA of ToF-SIMS spectra. The results are verified by immunostaining. Finally, the comparative ToF-SIMS analysis of ECM produced by MSCs of healthy donors and patients suffering from myelodysplastic syndrome display the potential of the novel methodology to reveal disease-associated alterations of the ECM composition.

Bioresponsive starPEG-heparin hydrogel coatings on vascular stents for enhanced hemocompatibility.

Hydrogel coatings can improve the biocompatibility of medical devices. However, stable surface bonding and homogeneity of hydrogel coatings are often challenging. This study exploits the benefits of biohybrid hydrogels of crosslinked four-armed poly(ethylene glycol) and heparin to enhance the hemocompatibility of cobalt­chromium (CoCr) vascular stents. A bonding layer of dual silane and poly(ethylene-alt-maleic anhydride) (PEMA) treatment was applied to the stent to provide covalent immobilization and hydrophilicity for the homogeneous spreading of the hydrogel. A spray coating technology was used to distribute the aqueous solution of the reactive hydrogel precursors onto the sub-millimeter struts of the stents, where the solution polymerized to a homogeneous hydrogel film. The coating was mechanically stable on the stent after ethanol dehydration, and the stents could be stored in a dry state. The homogeneity and stability of the coating during stent expansion were verified. Quasistatic and dynamic whole blood incubation experiments showed substantial suppression of the pro-coagulant and inflammatory activity of the bare metal by the coating. Translation of the technology to industrial coating devices and future surface modification of stents with anti-inflammatory hydrogels are discussed.

Controlling line defects in wrinkling: a pathway towards hierarchical wrinkling structures.

We demonstrate a novel approach for controlling the line defect formation in microscopic wrinkling structures by patterned plasma treatment of elastomeric surfaces. Wrinkles were formed on polydimethylsiloxane (PDMS) surfaces exposed to low-pressure plasma under uniaxial stretching and subsequent relaxation. The wrinkling wavelength λ can be regulated via the treatment time and choice of plasma process gases (H2, N2). Sequential masking allows for changing these parameters on micron-scale dimensions. Thus, abrupt changes of the wrinkling wavelength become feasible and result in line defects located at the boundary zone between areas of different wavelengths. Wavelengths, morphology, and mechanical properties of the respective areas are investigated by Atomic Force Microscopy and agree quantitatively with predictions of analytical models for wrinkle formation. Notably, the approach allows for the first time the realization of a dramatic wavelength change up to a factor of 7 to control the location of the branching zone. This allows structures with a fixed but also with a strictly alternating branching behavior. The morphology inside the branching zone is compared with finite element methods and shows semi-quantitative agreement. Thus our finding opens new perspectives for "programming" hierarchical wrinkling patterns with potential applications in optics, tribology, and biomimetic structuring of surfaces.

Ammonia Plasma-Induced n-Type Doping of Semiconducting Carbon Nanotube Films: Thermoelectric Properties and Ambient Effects.

We explore an n-type doping strategy of semiconducting single-walled carbon nanotubes (sc-SWCNTs) by a covalent functionalization in ammonia plasma and elucidate the effect of air exposure on thermoelectric properties of the sc-SWCNTs before and after doping. Without doping, the sc-SWCNT films have a Seebeck coefficient of 125 µV/K and a power factor (PF) of 95 µW/m K2 in ambient conditions. Heating of such films in air up to 100 °C and above is not changing their thermoelectric properties noticeably; however, the films can be converted to an n-type material simply by gas desorption at low pressure and room temperature, showing an outstanding negative Seebeck coefficient of -133 µV/K and a PF of 55 µW/m K2. Doping of the sc-SWCNT films with ammonia plasma leads to the reduction of the Seebeck coefficient down to 40 µV/K in ambient conditions, which is the result of two competing effects: attachment of electron-donating functional groups during plasma treatment and adsorption of water molecules when exposing films to air. At temperatures slightly higher than the boiling point of water, the doped films of sc-SWCNTs show the lowest Seebeck coefficient of -80 µV/K in air. A similar value of the Seebeck coefficient is obtained for the same films at low pressures and room temperature. To our knowledge, this is one of the best values ever reported for n-type pure carbon nanotube films.

Thermo-responsive cell culture carrier: Effects on macrophage functionality and detachment efficiency.

Harvesting cultivated macrophages for tissue engineering purposes by enzymatic digestion of cell adhesion molecules can potentially result in unintended activation, altered function, or behavior of these cells. Thermo-responsive polymer is a promising tool that allows for gentle macrophage detachment without artificial activation prior to subculture within engineered tissue constructs. We therefore characterized different species of thermo-responsive polymers for their suitability as cell substrate and to mediate gentle macrophage detachment by temperature shift. Primary human monocyte- and THP-1-derived macrophages were cultured on thermo-responsive polymers and characterized for phagocytosis and cytokine secretion in response to lipopolysaccharide stimulation. We found that both cell types differentially respond in dependence of culture and stimulation on thermo-responsive polymers. In contrast to THP-1 macrophages, primary monocyte-derived macrophages showed no signs of impaired viability, artificial activation, or altered functionality due to culture on thermo-responsive polymers compared to conventional cell culture. Our study demonstrates that along with commercially available UpCell carriers, two other thermo-responsive polymers based on poly(vinyl methyl ether) blends are attractive candidates for differentiation and gentle detachment of primary monocyte-derived macrophages. In summary, we observed similar functionality and viability of primary monocyte-derived macrophages cultured on thermo-responsive polymers compared to standard cell culture surfaces. While this first generation of custom-made thermo-responsive polymers does not yet outperform standard culture approaches, our results are very promising and provide the basis for exploiting the unique advantages offered by custom-made thermo-responsive polymers to further improve macrophage culture and recovery in the future, including the covalent binding of signaling molecules and the reduction of centrifugation and washing steps. Optimizing these and other benefits of thermo-responsive polymers could greatly improve the culture of macrophages for tissue engineering applications.

Providing the right cues in nerve guidance conduits: Biofunctionalization versus fiber profile to facilitate oriented neuronal outgrowth.

Following peripheral nerve injury, rapid and spatially oriented axonal outgrowth from the proximal nerve stump is required for successful tissue regeneration. Regenerative strategies such as introducing fiber bundles into the nerve guidance conduits improve the directional growth of neurons and Schwann cells. Recently, it has been proposed that fiber profiling increases cell alignment and could accelerate neuronal growth. Here, we evaluate the impact of fiber profiling on the extent of neurite outgrowth in vitro as compared to non-profiled round fibers. We developed novel profiled trilobal poly(lactic acid) (PLA) fibers and systematically tested their potency to support nerve regeneration in vitro. The profiled fibers did not improve neurite outgrowth as compared to the round fibers. Instead, we show that growing neurites are merely guided by the type and quantity of proteins adsorbed on the polymer surface. Together this data has significant implications for in vivo experiments focusing on directional regrowth of severed axons across lesion sites during peripheral nerve regeneration.

Biodegradable fiducial markers for X-ray imaging - soft tissue integration and biocompatibility.

This study aims at the development of materials for biodegradable fiducial markers for X-ray based medical imaging and their anchorage in soft tissue. Towards this goal a degradable polymer matrix of poly(l-lactide-co-ε-caprolactone) (P[LAcoCL]) was combined with barium sulfate (BaSO4) and hydroxyapatite (HAp) as radio-opaque fillers. Low pressure plasma treatment was applied to the composite materials to improve cell adhesion and subsequent tissue integration. In particular, the effects of oxygen and ammonia plasmas were evaluated and compared using X-ray photoelectron spectroscopy, atomic force microscopy and dynamic water contact angle measurements as well as in vitro studies using the murine fibroblast cell line L929. To exclude the cytotoxic effects of degradation products of P[LAcoCL] and released BaSO4 or HAp cytotoxicity assays with the degradation products of the composite materials were conducted. The results obtained by this broad range of analytical techniques suggest the application of composites of P[LAcoCL] with BaSO4 and HAp as promising material systems for innovative fiducial markers for soft tissue in X-ray based medical imaging.

Comprehensive characterization of well-defined silk fibroin surfaces: Toward multitechnique studies of surface modification effects.

The study aims at a comprehensive surface characterization of untreated and oxygen plasma-treated silk fibroin with a particular focus on phenomena relevant to biointeraction and cell adhesion. For that purpose, a range of advanced surface diagnostic techniques is employed to thoroughly investigate well-defined and especially clean silk fibroin samples in a comparable setting. This includes surface chemistry and surface charges as factors, which control protein adsorption, but also hydration and swelling of the material as important parameters, which govern the mechanical stiffness at the interface with aqueous media. Oxygen plasma exposure of silk fibroin surfaces reveals that material ablation strongly predominates over the introduction of functional groups even for mild plasma conditions. A substantial increase in mechanical stiffness is identified as the most prominent effect upon this kind of plasma treatment. Regarding the experimental approach and the choice of techniques, the work goes beyond previous studies in this field and paves the way for well-founded investigations of other surface-selective modification procedures that enhance the applicability of silk fibroin in biomedical applications.

Thermo-responsive cell culture carriers based on poly(vinyl methyl ether)-the effect of biomolecular ligands to balance cell adhesion and stimulated detachment.

Two established material systems for thermally stimulated detachment of adherent cells were combined in a cross-linked polymer blend to merge favorable properties. Through this approach poly(N-isopropylacrylamide) (PNiPAAm) with its superior switching characteristic was paired with a poly(vinyl methyl ether)-based composition that allows adjusting physico-chemical and biomolecular properties in a wide range. Beyond pure PNiPAAm, the proposed thermo-responsive coating provides thickness, stiffness and swelling behavior, as well as an apposite density of reactive sites for biomolecular functionalization, as effective tuning parameters to meet specific requirements of a particular cell type regarding initial adhesion and ease of detachment. To illustrate the strength of this approach, the novel cell culture carrier was applied to generate transplantable sheets of human corneal endothelial cells (HCEC). Sheets were grown, detached, and transferred onto planar targets. Cell morphology, viability and functionality were analyzed by immunocytochemistry and determination of transepithelial electrical resistance (TEER) before and after sheet detachment and transfer. HCEC layers showed regular morphology with appropriate TEER. Cells were positive for function-associated marker proteins ZO-1, Na+/K+-ATPase, and paxillin, and extracellular matrix proteins fibronectin, laminin and collagen type IV before and after transfer. Sheet detachment and transfer did not impair cell viability. Subsequently, a potential application in ophthalmology was demonstrated by transplantation onto de-endothelialized porcine corneas in vitro. The novel thermo-responsive cell culture carrier facilitates the generation and transfer of functional HCEC sheets. This paves the way to generate tissue engineered human corneal endothelium as an alternative transplant source for endothelial keratoplasty.

Tissue engineering of the corneal endothelium: a review of carrier materials.

Functional impairment of the human corneal endothelium can lead to corneal blindness. In order to meet the high demand for transplants with an appropriate human corneal endothelial cell density as a prerequisite for corneal function, several tissue engineering techniques have been developed to generate transplantable endothelial cell sheets. These approaches range from the use of natural membranes, biological polymers and biosynthetic material compositions, to completely synthetic materials as matrices for corneal endothelial cell sheet generation. This review gives an overview about currently used materials for the generation of transplantable corneal endothelial cell sheets with a special focus on thermo-responsive polymer coatings.

Surface modification of cell culture carriers: routes to anhydride functionalization of polystyrene.

Physico-chemical and topographical cues allow to control the behavior of adherent cells. Towards this goal, commercially available cell culture carriers can be finished with a laterally microstructured biomolecular functionalization. As shown in a previous study [Biomacromolecules 4 (2003) 1072], the anhydride moiety facilitates a simple and versatile way to protein binding. The present work addresses the technical issue of anhydride surface functionalization of polystyrene, the most common material for cell culture ware. Different approaches based on low pressure plasma, electron beam and ultraviolet light techniques (i.e. maleic anhydride plasma reactions; plasma, electron beam and UV immobilization of functional polymer thin films; grafting of functional polymers to plasma activated surfaces) are introduced and briefly illustrated with examples. Results are characterized by Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and ellipsometry. The different routes are compared in terms of technical feasibility and achievable surface properties.

Interrelations between charging, structure and electrokinetics of nanometric polyelectrolyte films.

Streaming current, surface conductivity and swelling data of poly(acrylic acid) (PAA) and poly(ethylene imine) (PEI) thin films are analyzed on the basis of the theory for diffuse soft interfaces (J.F.L. Duval, R. Zimmermann, A. L. Cordeiro, N. Rein, C. Werner, Langmuir 25 (2009) 10691). Focus is put on ways to unravel the electroosmotic and migration contributions of the measured surface conductivity, which is crucial for appropriate electrokinetic analysis of films carrying high densities of dissociable groups. Results demonstrate that the osmotically-driven swelling of the PAA films with increasing pH is accompanied by an increase in diffuseness for the interphasial polymer segment density distribution. This heterogeneity is particularly marked at low ionic strength with a non-monotonous dependence of the streaming current on pH and the presence of a maximum at pH∼6.5. The analysis of the PEI films evidences heterogeneous swelling with lowering pH, i.e. upon protonation of the amine groups. The characteristic decay length in the interphasial PEI segment density distribution is found to be nearly independent of the pH, which is in line with the moderate swelling determined by ellipsometry. A critical discussion is given on the strengths and limitations of electrokinetics/surface conductivity for quantifying the coupled electrohydrodynamic and structural properties of moderately to highly swollen polyelectrolyte thin films.

A new approach to biofunctionalisation and micropatterning of multi-well plates.

Biomolecule attachment and lateral micropatterning of biomolecular layers are essential techniques to provide in advanced biochemical and cell culture assays. For that purpose, we introduced a versatile, simple and robust method to functionalise standard polystyrene well plates. Free amino groups were generated on the polystyrene surface by low pressure ammonia plasma treatment. Subsequently, thin films of different maleic anhydride copolymers were covalently attached to the surfaces. The distinct physicochemical properties of the coupled maleic anhydride copolymers provided a broad range of possible attachment schemes of proteins and polysaccharides. Micrometer-sized lateral patterns of these functional coatings were created by plasma etching through silicon masks and subsequent chemical conversion of the etched areas using poly(ethylene glycol). The approach facilitates a wide variety of cell culture experiments allowing a combination of biomolecule coupling and micropatterning within the multi-well plate technology.

Functionalization of poly(dimethylsiloxane) surfaces with maleic anhydride copolymer films.

Combining advantageous bulk properties of polymeric materials with surface-selective chemical conversions is required in numerous advanced technologies. For that aim, we investigate strategies to graft maleic anhydride (MA) copolymer films onto poly(dimethylsiloxane) (PDMS) precoatings. Amino groups allowing the covalent attachment of the MA copolymer films to the PDMS (Sylgard 184) surface were introduced either by low-pressure ammonia plasma treatment, or by attachment of 3-aminopropyltriethoxysilane (APTES) onto air plasma-treated PDMS. The resultant coatings were extensively characterized by X-ray photoelectron spectroscopy (XPS), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), contact angle measurements, and atomic force microscopy (AFM). The results show that the impact of the plasma treatment on the physical properties on the topmost surface of the PDMS is critically important for the characteristics of the layered coatings.

Sulfated glyco-block copolymers with specific receptor and growth factor binding to support cell adhesion and proliferation.

We report on the successful preparation of thin glyco-block copolymer films with a combined thermoresponsive and heparin-like functionality. The copolymers were synthesized from poly(N-isopropylacrylamide) and glucose units and were covalently fixed onto glass supports by means of low pressure plasma cross-linking. The thin films retain the thermoresponsive characteristics of poly(N-isopropylacrylamide) with a transition temperature around 33 degrees C. Additionally, it could be shown that sulfation of the glucose moieties introduces a heparin-like functionality to the films. An increase in binding of basic fibroblast growth factor (bFGF) as well as specific adhesion of endothelial cells and hematopoietic progenitor cells could be demonstrated. The functional coupling of bFGF to the glyco-block copolymer surfaces was further proven by the dose-dependent response of endothelial cell proliferation. The results show that the newly synthesized glyco-block copolymers allow for the preparation of biomimetic surfaces with dual functionalities of thermoresponsive and heparin-like characteristics for the application in cell culture experiments with specific binding and release of heparin-binding growth factors and cell adhesion receptors.

Surface functionalization of silicone rubber for permanent adhesion improvement.

The surface properties of poly(dimethyl siloxane) (PDMS) layers screen printed onto silicon wafers were studied after oxygen and ammonia plasma treatments and subsequent grafting of poly(ethylene -alt-maleic anhydride) (PEMA) using X-ray photoelectron spectroscopy (XPS), roughness analysis, and contact angle and electrokinetic measurements. In the case of oxygen-plasma-treated PDMS, a hydrophilic, brittle, silica-like surface layer containing reactive silanol groups was obtained. These surfaces indicate a strong tendency for "hydrophobic recovery" due to the surface segregation of low-molecular-weight PDMS species. The ammonia plasma treatment of PDMS resulted in the generation of amino-functional surface groups and the formation of a weak boundary layer that could be washed off by polar liquids. To avoid the loss of the plasma modification effect and to achieve stabilization of the mechanically instable, functionalized PDMS top layer, PEMA was subsequently grafted directly or after using gamma-APS as a coupling agent on the plasma-activated PDMS surfaces. In this way, long-time stable surface functionalization of PDMS was obtained. The reactivity of the PEMA-coated PDMS surface caused by the availability of anhydride groups could be controlled by the number of amino functional surface groups of the PDMS surface necessary for the covalent binding of PEMA. The higher the number of amino functional surface groups available for the grafting-to procedure, the lower the hydrophilicity and hence the lower the reactivity of the PEMA-coated PDMS surface. Additionally, pull-off tests were applied to estimate the effect of surface modification on the adhesion between the silicone rubber and an epoxy resin.

Cultivation of an immortalized human corneal endothelial cell population and two distinct clonal subpopulations on thermo-responsive carriers.

BACKGROUND: Recently, it was possible to show that human corneal endothelial cells (HCEC) can be cultured on thermo-responsive polymer substrates, and can be harvested as entire cell sheets without losing viability. We sought to study HCEC sheet cultivation on such cell culture carriers under serum-free conditions as the next consequential step in developing methods for generation of corneal endothelial cell transplants. METHODS: An immortalized heterogenous HCEC population and two immortalized, clonally grown HCEC lines (HCEC-B4G12 and HCEC-H9C1) were cultured on thermo-responsive substrates under serum-supplemented and serum-free culture conditions. Cell sheets were characterized by phase contrast microscopy and by immunofluorescent staining for ZO-1, Na(+),K(+)-ATPase, and vinculin. RESULTS: All tested HCEC populations were able to adhere, spread and proliferate on thermo-responsive substrates under serum-supplemented conditions. Under serum-free conditions, pre-coating of the polymer substrates with ECM proteins was necessary to facilitate attachment and spreading of the cells, except in the case of HCEC-B4G12 cells. The heterogenous HCEC population formed closed monolayers, properly localized ZO-1 to lateral cell borders, and had moderate vinculin levels under serum-free, and higher vinculin levels under serum-supplemented culture conditions. HCEC-B4G12 cells formed closed monolayers, showed proper localization of ZO-1 and Na(+),K(+)-ATPase to lateral cell borders, and had high vinculin levels irrespective of culture conditions. In contrast, HCEC-H9C1 cells had lowest vinculin levels under serum-supplemented, and higher vinculin levels under serum-free culture conditions. ZO-1 was detected throughout the cytoplasm under both culture conditions. These loosely adherent cells were only able to form a closed monolayer under serum-supplemented conditions. CONCLUSIONS: Serum-free production of HCEC sheets is possible. The extremely adherent clonal HCEC line B4G12 produced higher vinculin levels than the other two tested HCEC populations, and showed strong adherence to the thermo-responsive, polymeric culture substratum irrespective of culture conditions. This cell line closely resembles terminally differentiated HCEC in vivo, and was found to be particularly suitable for further studies on HCEC cell sheet engineering.

Surface modification of poly(hydroxybutyrate) films to control cell-matrix adhesion.

Tailoring surface properties of degradable polymer scaffolds is key to progress in various tissue engineering strategies. Poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-4-hydroxybutyrate) thin films were modified by low pressure ammonia plasma, low pressure water vapour plasma, or immersion in a sodium hydroxide solution to elaborate means to control the cell-matrix adhesion of human umbilical cord vein endothelial cells grown on these materials. Fibronectin (FN) heteroexchange and cell adhesion were correlated to the physicochemical characteristics of the modified polymer surfaces which were investigated by X-ray photoelectron spectroscopy (XPS), scanning force microscopy (SFM), electrokinetic measurements, and contact angle measurements. All treatments increased the hydrophilicity of the polymer samples, which could be accounted to newly created amine or carboxyl functionalities for ammonia plasma or water vapour plasma treatments, respectively, and ester hydrolysis for treatments with alkaline aqueous solutions. Main features of cell adhesion and FN reorganisation-evaluated after 1h and after 5 days-could be attributed to the anchorage strength of pre-coated FN layers at the polymer surface, which was, in turn found to be triggered by the type of modification applied. In line with earlier studies referring to different materials cell adhesion and matrix reorganisation were shown to be sensitively controlled through the physicochemical profile of poly(hydroxybutyrate) surfaces.

Thermo-responsive poly(NiPAAm-co-DEGMA) substrates for gentle harvest of human corneal endothelial cell sheets.

Gentle harvesting of corneal endothelial cell sheets grown in culture is of interest for the development of cornea replacement strategies. Thin films of a fast responding copolymer of N-isopropylacrylamide (NiPAAm) and diethyleneglycol methacrylate (DEGMA) with a phase transition temperature of 32 degrees C were prepared and evaluated for that purpose. The polymer layers were immobilized onto fluorocarbon substrates using low pressure argon plasma treatment. Cell culture and detachment experiments were performed with L929 mouse fibroblasts and human corneal endothelial cells (HCEC) at standard conditions. The hydrogel-coated supports were found to permit adhesion, spreading, and proliferation of both cell types. Harvesting of cell sheets was achieved upon lowering the temperature to about 30 degrees C. The formation of a closed monolayer as a crucial prerequisite for maintaining ionic pump function in HCEC was proven by ZO-1 immunostainung. Labeling of fibronectin indicated that the vast majority of the extracellular matrix is detached from the hydrogel coatings together with the cell layer. Inspired by this result, the reuse of the hydrogel-coated culture carriers was investigated confirming the suitability of the substrates for repeated cell harvesting. Altogether, the introduced thermoresponsive coating was found advantageous for the efficient generation of HCEC sheets and will be further utilized in transplantation strategies.

Immobilized hyperbranched glycoacrylate films as bioactive supports.

[Image: see text] We report on the low-pressure plasma immobilization, characterization and application of thin films of hyperbranched glycoacrylates, poly(3-O-acryloyl-alpha,beta-D-glucopyranoside) (AGlc), on PTFE-like fluorocarbon surfaces. This method is an efficient and versatile way to immobilize sugar-carrying branched acrylates as thin films of approximately 5 nm thickness on polymeric substrates while the functional groups and properties of the immobilized molecules are largely retained. The extent of poly(AGlc) degradation during plasma immobilization was investigated using FTIR-ATR spectroscopy and XPS. The thickness and topography of the immobilized films were characterized using spectroscopic ellipsometry and SFM, respectively. Studies of protein adsorption, as well as cell adhesion and proliferation on the poly(AGlc) surfaces, showed that these materials are suitable for the control of biointerfacial phenomena. Fluorescence images of fibronectin adsorbed on to the branched glycoacrylate with a mask.