Exploring seasonal variability in water quality of Nyabarongo River in Rwanda via water quality indices and DPSIR modelling.

Understanding seasonal variations in water quality is crucial for effective management of freshwater rivers amidst changing environmental conditions. This study employed water quality index (WQI), metal index (MI), and pollution indices (PI) to comprehensively assess water quality and pollution levels in Nyabarongo River of Rwanda. A dynamic driver-pressure-state-impact-response model was used to identify factors influencing quality management. Over 4 years (2018-2021), 69 samples were collected on a monthly basis from each of the six monitoring stations across the Nyabarongo River throughout the four different seasons. Maximum WQI values were observed during dry long (52.90), dry short (21.478), long rain (93.66), and short rain (37.4) seasons, classified according to CCME 2001 guidelines. Ion concentrations exceeded WHO standards, with dominant ions being HCO 3 - and Mg 2 + . Variations in water quality were influenced by factors such as calcium bicarbonate dominance in dry seasons and sodium sulfate dominance in rainy seasons. Evaporation and precipitation processes primarily influenced ionic composition. Metal indices (MI) exhibited wide ranges: long dry (0.2-433.0), short dry (0.1-174.3), long rain (0.1-223.7), and short rain (0.3-252.5). The hazard index values for Cu2+, Mn4+, Zn2+, and Cr3+ were below 1, ranging from 8.89E - 08 to 7.68E - 07 for adults and 2.30E - 07 to 5.02E - 06 for children through oral ingestion, and from 6.68E - 10 to 5.07E - 07 for adults and 6.61E - 09 to 2.54E - 06 for children through dermal contact. With a total carcinogenic risk of less than 1 for both ingestion and dermal contact, indicating no significant health risks yet send strong signals to Governmental management of the Nyabarongo River. Overall water quality was classified as marginal in long dry, poor in short dry, good in long rain, and poor again in short rain seasons.

Highly-efficient molten NaOH-KOH for organochlorine destruction: Performance and mechanism.

Molten salt has been increasingly acknowledged to be useful in the destruction of chlorine-containing organic wastes (COWs), e.g., organochlorine. However, the operational temperatures are usually high, and local structure and thermodynamic property of the molten salt remain largely unclear. In this study, novel molten NaOH-KOH is developed for organochlorine destruction, and its eutectic point can be lowered to 453 K with 1:1 mol ratio of NaOH to KOH. Further experiment shows that this molten NaOH-KOH is highly-efficient towards the destructions of both trichlorobenzene and dichlorophenol, acquiring the final dechlorination efficiencies as 88.2% and 94.1%, respectively. The organochlorine destruction and chloride salt enrichment are verified by fourier-transform infrared spectrometer. Molten NaOH-KOH not only eliminates the C-Cl and CC bonds, but also traps generated CO2, other acidic gases, and possibly particulate matters as a result of the high surface area and high viscosity. This makes it possibly advantageous over incineration for organic waste destruction for carbon neutrality. To sufficiently reveal the inherent mechanism for the temperature dependent performance, molecular dynamics simulation is further adopted. Results show that the radial distance between ions increases with temperature, causing larger molar volume and lower resistance to shear deformation. Moreover, thermal expansion coefficient, specific heat capacity, and ion self-diffusion coefficient of the molten NaOH-KOH are found to increase linearly with temperature. All these microscopic alterations contribute to the organochlorine destruction. This study benefits to develop highly-efficient molten system for COWs treatment via a low-carbon approach.

Enhanced volatile fatty acid production from food waste via anaerobic fermentation: effect of irons with different sizes.

ABSTRACTFood waste is an excellent organic matter for anaerobic fermentation. This study provided a cost-effective and highly efficient volatile fatty acid (VFA) production strategy by the addition of zero-valent iron (ZVI). Results showed that VFA concentration of 44.6 g/L was obtained with the optimized conditions of 200-mesh iron powder at a dosage of 20.0 g, fermentation time of 11 d, total solids (TS) of 10 wt.%, and fermentation temperature of 37 ℃. Further, the iron of different particle sizes (iron scraps, 200-mesh iron powder, and 800-mesh iron powder) had a differential influence on total organic carbon (TOC), total nitrogen (TN), and VFA concentrations. For the reactor containing 200-mesh iron powder, the conversion rate of organic compound into VFA increased with the increase of dosage, which reached 58.4% at the 40.0 g dosage. The mechanism revealed that the VFA production was enhanced by micro-electrolysis, which can rapidly inactivate bacteria and increase the conversion of macromolecular organics into micromolecular organics.

City classification for municipal solid waste prediction in mainland China based on K-means clustering.

Cities in mainland China are usually classified according to geographical locations. This traditional city classification system is limited to relative fixed factors, which lives out a gap in terms of the spatial differences of municipal solid waste (MSW). Developing a more comprehensive city classification system is essential for MSW generation prediction and waste management. In this study, six economic, social and climatic indicators that affect MSW generation: population, per capita GDP (PCGDP), environmental sanitation investment (ESI), average temperature, average precipitation, and average humidity, are selected. Weights were calculated for each indicator using a combination of CRITIC weight method and Pearson correlation coefficient prior to cluster analysis. The k-means clustering algorithm was used to classify all cities into four clusters, which differed significantly in the relationships between MSW generation and influencing factors. The results of Kruskal-Wallis test also show that cities in different clusters show different distributions in terms of the indicators selected. The cross-prediction results of the model further validate the reliability of the clustering results from a quantitative perspective. By establishing a city classification system, cities with similar relationships between MSW generation and influencing factors can be placed into one cluster. The model established in one certain city cluster can be used to predict the MSW generation for cities in the same cluster that lack historical data. This may also help to formulate appropriate regional policies according to different relationships between MSW generation and influencing factors, especially for the four city clusters in the mainland China.

Evaluating the capability of municipal solid waste separation in China based on AHP-EWM and BP neural network.

With the increase in municipal solid waste (MSW), most cities face solid waste management issues. In this study, the analytic hierarchy process (AHP) and artificial neural network (ANN) models were improved to assess the MSW separation capability based on 18 selected indicators of solid waste separation in 15 cities in China. The entropy weight method (EWM) was used in AHP to optimize and determine the indicators and then evaluate their weights, which showed that the general public budget expenditure had the highest weight (0.5239). This implied that the MSW separation capability could be mainly influenced by government financial support. ANN based on scan optimization and machine learning methods were established (R2 = 0.9992) to predict the missing indicators. The mapping relationship between MSW separation indicators and capabilities was also significantly improved from R2 = 0.5317 to R2 = 0.9993, thereby increasing the prediction accuracy of MSW separation capabilities to 95.15%. Thus, this research provides a new avenue for MSW separation and establishes a combined model to predict the separation capability in practical applications.

New insights into regional differences of the predictions of municipal solid waste generation rates using artificial neural networks.

As one of the most popular non-linear models, artificial neural network (ANN) has been successfully applied in the prediction of municipal solid waste (MSW). Despite its high accuracy achieved in a specific city or region, little progress is made on a larger-scale, which would be resulted from the regional difference. In this study, ANN models for MSW prediction in mainland China are developed and optimized. Besides a model aiming for all cities, regional models are developed by grouping these cities into three categories. Impact of regional difference in MSW prediction is analyzed by evaluation of model's dependence on each predictor, and comparisons made between these models. Results show that regional difference has huge impact on MSW prediction. Accuracy of MSW prediction would increase from 0.916 in R2 and 59.3 in rooted mean squared error (RMSE) to 0.968/0.946/0.943 in R2 and 6.4/9.7/17.6 in RMSE for southern/northern/western region after a three-region division. Models for MSW prediction in southern and northern region of mainland China share much similarity in dependence on predictors, which differs a lot from that for western region. Further cross-prediction process confirmed that models for southern or northern regions might be suitable for the MSW prediction in another, yet not apply to that in western region. Such large-scale based model can be used by cities lacking historical data for prediction of their local MSW generation, the predictive result would be helpful in MSW disposal planning and the analysis of regional difference would be helpful in establishing regional policy, especially for the three regions in mainland China.

Molten hydroxide for detoxification of chlorine-containing waste: Unraveling chlorine retention efficiency and chlorine salt enrichment.

Hazardous waste dechlorination reduces the potential of creating dioxins during the incineration process. To investigate the salt effect on waste dechlorination, molten hydroxides with a low melting temperature were utilized for the pre-dechlorination and decomposition of chlorine-containing organic wastes (COWs) including trichlorobenzene (TCB), perchloroethylene, hexachlorobenzene and chlordane. The results showed that a eutectic mixture of caustic sodium and potassium hydroxides (41 wt.% NaOH and 59 wt.% KOH) led to a low melting point below 300°C and a relatively high chlorine retention efficiency (CRE) with TCB as a representative COWs. The amounts of hydroxides, reaction time, and temperature all had notable influence on CRE. When the mass ratio of hydroxides to TCB reached 30:1, approximately 98.1% of the TCB was destroyed within 2.5 hr at 300°C with CRE of 71.6%. According to the residue analysis, the shapes of reaction residues were irregular with particles becoming swollen and porous. The benzene ring and C-Cl bonds disappeared, while carboxyl groups formed in the residues. The stripped chlorine was retained and condensed to form chloride salts, and the relative abundance of the chloride ions associated with the mass of TCB in residues increased from 0 to 75.0% within the 2.5 hr reaction time. The observed concentration of dioxins in residues was 5.6 ngTEQ/kg. A reaction pathway and possible additional reactions that occur in this dechlorination system were proposed. Oxidizing agents may attack TCB and facilitate hydrogenation/dechlorination reactions, making this process a promising and environmentally friendly approach for chlorine-containing organic waste treatment.

Dechlorination and conversion mechanism of trichlorobenzene as a model compound of chlorine-containing wastes by different base-catalyzed combinations.

Chlorine-containing organic waste (COWs) is a big threat for the waste incineration because of the dioxin generation and equipment corrosion. Recently, dechlorination and detoxification of COWs is emergent in order to lower the environmental risk and treatment costs. In this study, base-catalyzed decomposition processes with different hydroxides, hydrogen donors, and catalysts were conducted for pre-treatment of COWs to reduce organic chlorine content, with the TCB as a model compound and industrial rectification residues for verification. Results showed that maximum chlorine retention efficiency (CRE) of four alkalis followed the order of KOH > NaOH-KOH > NaOH > Mg(OH)2, which were 98.3%, 93.4%, 97.2%, and 1.5%, respectively, and could be expressed as an apparent first-order reaction. The differences were resulted from the varying ionic potentials of the metal cations. Hydrogen donors (glycol, glycerol, paraffin oil, and PEG 200) acted as effective dechlorination regents follow the order of PEG > glycol > paraffin oil > glycerol. In addition, Fe, Ni, Cu, and activated carbon catalysts increased the CRE by 68.9% to 92.4%, 91.9%, 89.2%, and 73.3%, respectively. Residue analysis through X-ray diffraction and Fourier transform infrared spectroscopy revealed that KCl, sodium oxalate, and phenol were the main products and a plausible stepwise dechlorination pathway was proposed. The effectiveness of three optimized combinations including NaOH/PEG, KOH/PEG, and NaOH-KOH/PEG (with the Fe catalyst) was confirmed by using them for dechlorinating rectification residues, and they restrained 98.2%, 91.2%, and 94.6% of the chlorine, respectively. The organochlorine content decreased from 19.2 to 1.8% within 180 min, while inorganic chorine content increased from 1.5 to 18.9%, indicating the potential for COWs dechlorination.

Preparation and reactivation of magnetic biochar by molten salt method: Relevant performance for chlorine-containing pesticides abatement.

Molten salt has been regarded as a versatile and environmental-friendly method for the material preparation and waste destruction. In this work, molten FeCl3 was utilized for the generation of magnetic biochar (MBC) derived from simultaneous activation and magnetization of biomass. The sample characterization indicated that MBC had a rough surface with BET surface area of 404 m2/g and total pore volume of 0.35cm3/g. Highly dispersed Fe3O4 and nitrogen could be deposited on the surface, leading to an excellent magnetization property. The MBC exhibited a great 2,4-Dichlorophenol (2.4-DCP) and atrazine removal performance in solution with the maximum adsorption capacity achieved 298.12 mg/g and 102.17 mg/g. Kinetics results demonstrated that MBC adsorption met the Pseudo-first-order model better. Molten NaOH-Na2CO3 was provided for the re-activation of exhausted MBC. 2,4-DCP was firstly desorbed from the MBC and subsequently destructed by the active species in the melt medium. Chlorine can be captured in the molten alkaline medium from the XRD pattern of residues.The MBC could be easily recovered with a yield of 98.2% and fixed carbon content of 61.0% after the molten salt regeneration process. With no 2,4-DCP detected, 65.5% and 31.69% of initial Cl was found in washing water and residues with the molten NaOH-Na2CO3, respectively. After 4 cycles of regeneration and adsorption, 60.55%-72.22% of initial adsorption capacity can be kept. This preparation and regeneration method can be an effective way to reduce the risk of secondary pollution of chlorinated organic compounds during adsorbent regeneration.Implications: Molten salt (MS) is a salt or multiple salts with a low melting point, and has been applied in many sectors and is regarded as a crucial role in terms of energy, environmental, and resource sustainability. In our paper, magnetic biochar was prepared by one-step activation and magnetization of fir dust using molten FeCl3∙6H2O. Meanwhile, a regeneration method using molten alkaline salt was provided. Magnetic biochar generated in our study performed well in the 2,4-dichlorophenol and atrazine adsorption. After four cycles of regeneration and adsorption, 72.2% of initial 2,4-DCP adsorption capacity can be kept.

Decomposition characteristics of humic-like matters with the hollow ellipsoid structure sludge inoculated from decayed soil in mature landfill leachate.

The organics in mature leachate are mainly humic-like matters, which account for over 80% weight of the total organics. In this work, the microorganisms in decayed soil were found to be capable of decomposing the humic-like matters evidently using an anaerobic-aerobic/anoxic bioprocess in two sequencing bio-reactors. The 3D excitation-emission matrix and Fourier transform infrared (FT-IR) were applied to characterize the variation of dissolved organic matters in mature leachate while sludge morphology was characterized by scanning electron microscopy. The intensities of fluorescence peaks A and C of leachate effluents were 71.66% and 48.75% lower than those of influents, respectively, which indicated the extraordinary degradation ability of microorganisms inoculated from the decayed soil. Meanwhile a kind of distinctive hollow ellipsoid structure sludge organized by tiny soil particles was observed, which might favour the humic-like matters' decomposition and has never been reported before as we know. The formation mechanisms of hollow ellipsoid structure sludge will need further study.

The use of the core-shell structure of zero-valent iron nanoparticles (NZVI) for long-term removal of sulphide in sludge during anaerobic digestion.

A core-shell structure results in zero-valent iron nanoparticles (NZVI) with manifold functional properties. In this study, the long-term effects of NZVI on hydrogen sulphide removal in an anaerobic sludge digester were investigated. Within 20 days, the average hydrogen sulphide content in the biogas was successfully reduced from 300 (or 3620 of sulphate-rich sludge) mg Nm(-3) to 6.1 (121), 0.9 (3.3) and 0.5 (1.3) mg Nm(-3) in the presence of 0.05, 0.10 and 0.20% (wt) NZVI, respectively. Methane yield was enhanced at the low NZVI dose (0.05-0.10%) but decreased at the elevated dose (0.20%). Methane production and volatile solid degradation analyses implied that doses of 0.5-0.10% NZVI could accelerate sludge stabilization during anaerobic digestion. The phosphorus fractionation profile suggested that methane production could be inhibited at the elevated NZVI dose, partly due to the limited availability of soluble phosphorus due to the immobilization of bioavailable-P through the formation of vivianite. An analysis of the reducible inorganic sulphur species revealed that the elimination of hydrogen sulphide occurred via the reaction between hydrogen sulphide and the oxide shell of NZVI, which mainly formed FeS and some FeS2 and S(0).

Acetic acid production from food wastes using yeast and acetic acid bacteria micro-aerobic fermentation.

In this study, yeast and acetic acid bacteria strains were adopted to enhance the ethanol-type fermentation resulting to a volatile fatty acids yield of 30.22 g/L, and improve acetic acid production to 25.88 g/L, with food wastes as substrate. In contrast, only 12.81 g/L acetic acid can be obtained in the absence of strains. The parameters such as pH, oxidation reduction potential and volatile fatty acids were tested and the microbial diversity of different strains and activity of hydrolytic ferment were investigated to reveal the mechanism. The optimum pH and oxidation reduction potential for the acetic acid production were determined to be at 3.0-3.5 and -500 mV, respectively. Yeast can convert organic matters into ethanol, which is used by acetic acid bacteria to convert the organic wastes into acetic acid. The acetic acid thus obtained from food wastes micro-aerobic fermentation liquid could be extracted by distillation to get high-pure acetic acid.

[Ecological demonstration activity and eco-civilization construction mode: review and prospects].

Ecological civilization is to normalize human development behaviors to harmonize the relationships between social and ecological development and eco-environment protection. In this paper, a comparative analysis was made on the ecological demonstration activities of ecological demonstration areas led by the Ministry of Environmental Protection, exemplar cities of national environmental protection, and ecological provinces, cities, and counties. It was considered that all the ecological demonstration activities had the problems of lacking pertinence of construction goals, disordered construction subjects, inefficient construction processes, and lacking continuous incentive mechanisms of assessment. In the meantime, through the analysis of the connotations of eco-civilization, the relationships between eco-civilization and eco-demonstration constructions were approached, and the eco-civilization construction mode was put forward in terms of construction goal, construction subject, and construction processes and assessment. The construction mode included the construction goal based on regional characteristics; the synergistic cooperation of construction subjects, the expanding ways of public participation, and the establishment of evaluation system for comprehensively measuring the 'actions and results'.

Copper leaching of MSWI bottom ash co-disposed with refuse: effect of short-term accelerated weathering.

Co-disposal of refuse with municipal solid waste incinerator (MSWI) bottom ash (IBA) either multi-layered as landfill cover or mixed with refuse could pose additional risk to the environment because of enhanced leaching of heavy metals, especially Cu. This study applied short-term accelerated weathering to IBA, and monitored the mineralogical and chemical properties of IBA during the weathering process. Cu extractability of the weathered IBA was then evaluated using standard leaching protocols (i.e. SPLP and TCLP) and co-disposal leaching procedure. The results showed that weathering had little or no beneficial effect on Cu leaching in SPLP and TCLP, which can be explained by the adsorption and complexation of Cu with DOM. However, the Cu leaching of weathered IBA was reduced significantly when situated in fresh simulated landfill leachate. This was attributed to weakening Cu complexation with fulvic acid or hydrophilic fractions and/or intensifying Cu absorption to neoformed hydr(oxide) minerals in weathered IBA. The amount of total leaching Cu and Cu in free or labile complex fraction (the fraction with the highest mobility and bio-toxicity) of the 408-h weathered IBA were remarkably decreased by 86.3% and 97.6% in the 15-day co-disposal leaching test. Accelerated weathering of IBA may be an effective pretreatment method to decrease Cu leaching prior to its co-disposal with refuse.

Greenhouse gases emissions accounting for typical sewage sludge digestion with energy utilization and residue land application in China.

About 20 million tonnes of sludge (with 80% moisture content) is discharged by the sewage treatment plants per year in China, which, if not treated properly, can be a significant source of greenhouse gases (GHGs) emissions. Anaerobic digestion is a conventional sewage sludge treatment method and will continue to be one of the main technologies in the following years. This research has taken into consideration GHGs emissions from typical processes of sludge thickening+anaerobic digestion+dewatering+residue land application in China. Fossil CO(2), biogenic CO(2), CH(4,) and avoided CO(2) as the main objects is discussed respectively. The results show that the total CO(2)-eq is about 1133 kg/t DM (including the biogenic CO(2)), while the net CO(2)-eq is about 372 kg/t DM (excluding the biogenic CO(2)). An anaerobic digestion unit as the main GHGs emission source occupies more than 91% CO(2)-eq of the whole process. The use of biogas is important for achieving carbon dioxide emission reductions, which could reach about 24% of the total CO(2)-eq reduction.

[Evolution and discrimination of ecological planning and its related conceptions].

Ecological planning is one of the most important tools in realizing city's sustainable development. The ecological planning in China was started in the 1980s, and on the basis of assimilating the existing theoretical and practical experiences from western countries, basically formed a theoretical system in accordance with the Chinese characteristics and acquired a series of practical results. This paper reviewed the research and development processes of China' s ecological planning. It is considered that the study of our ecological planning was derived from the geographical principles of land resources ecological utilization, the ecological principles of complex ecological system theory, and the combination of these two principles. The ecological planning has experienced three research stages, i. e., single-disciplinary exploration, multi-disciplinary and multi-perspective study (including landscape ecology, ecology and urban planning), and interdisciplinary and multidisciplinary collaboration research. The ecological planning and the related conceptions, primary principles, main academic points, and representatives at each research stage were summarized, and through the discrimination of the basic conceptions of ecological planning and other related plans, it was pointed out that ecological planning is an general conception which includes land ecological planning, urban ecological planning, and eco-city planning, and the principles and theories of ecological planning should be integrated into, led and restricted the present planning system to promote the city's and regional sustainable development.

Synergetic pretreatment of waste activated sludge by Fe(II)-activated persulfate oxidation under mild temperature for enhanced dewaterability.

The potential benefits of Fe(II)-activated persulfate (S(2)O(8)(2-)) oxidation under mild temperature in enhancing the dewaterability of waste activated sludge were investigated. Capillary suction time (CST) was used to characterize sludge dewatering. Zeta potential, particle size distribution, three-dimensional excitation-emission matrix (EEM) fluorescence spectroscopy, fourier-transformed infrared (FT-IR) spectroscopy and scanning electronic microscopy (SEM) were employed to explore influencing mechanisms. The results indicated that the dewaterability was deteriorated with single thermal treatment, but significantly enhanced in the presence of Fe(II)-S(2)O(8)(2-) oxidation and further advanced together with thermal treatment. EEM and FT-IR analysis indicated that combined thermal and Fe(II)-S(2)O(8)(2-) oxidation pretreatment led to degrading of tyrosine and tryptophan protein-like substances in extracellular polymeric substances (EPS) and cleavage of linkages in polymeric backbone. SEM images further revealed the rupture of sludge flocs at the colloidal scale, which contributed to the release of EPS-bound water and interstitial water trapped between flocs, and subsequent enhanced dewaterability.

Novel insights into enhanced dewaterability of waste activated sludge by Fe(II)-activated persulfate oxidation.

The potential of Fe(II)-activated persulfate (S(2)O(8)(2-)) oxidation on enhancing the dewaterability of sludge flocs from 3-full scale wastewater treatment plants (WWTPs) were investigated. Normalized capillary suction time (CST) was applied to evaluate sludge dewaterability. Both extracellular polymeric substances (EPS) and metabolic activity of microorganisms were determined to explore the responsible mechanism. Fe(II)-S(2)O(8)(2-) oxidation effectively improved sludge dewaterability. The most important mechanisms were proposed to be the degradation of EPS incorporated in sludge flocs and rupture of microbial cells. Three-dimensional excitation-emission matrix (EEM) fluorescence spectroscopy confirmed that the powerful SO(4)(-) from Fe(II)-S(2)O(8)(2-) system destroyed the particular functional groups of fluorescing substances (i.e., aromatic protein-, tryptophan protein-, humic- and fulvic-like substances) in EPS and caused cleavage of linkages in the polymeric backbone and simultaneous destruction of microbial cells, resulting in the release of EPS-bound water, intracellular materials and water of hydration inside cells, and subsequent enhancement of dewaterability.

Enhanced dewaterability of sewage sludge in the presence of Fe(II)-activated persulfate oxidation.

The potential benefits of Fe(II)-activated persulfate oxidation on sludge dewatering and its mechanisms were investigated in this study. Capillary suction time (CST) was used to evaluate sludge dewaterability. Both extracellular polymeric substances (EPS) and viscosity were determined in an attempt to explain the observed changes in sludge dewaterability. The optimal conditions to give preferable dewaterability characteristics were found to be persulfate (S(2)O(8)(2-)) 1.2 mmol/gVSS, Fe(II) 1.5 mmol/gVSS, and pH 3.0-8.5, which demonstrated a very high CST reduction efficiency (88.8% reduction within 1 min). It was further observed that both soluble EPS and viscosity played relatively negative roles in sludge dewatering, whereas no correlation was established between sludge dewaterability and bound EPS. Three-dimensional excitation-emission matrix (EEM) fluorescence spectra also revealed that soluble EPS of sludge were degraded and sludge flocs were ruptured by persulfate oxidation, which caused the release of water in the intracellular pace and subsequent improvement of its dewaterability.

Fabrication of two-dimensional superposed microstructure by interference lithography.

In this paper, we report the basic theory and method of single exposure interference lithography (IL) to fabricate two-dimensional (2D) superposed microstructures. Distribution of six-beam interference intensities with different azimuth angle is discussed, and 2D superposed microstructures with different periodic constants are obtained by computer simulations. The experiment results using CHP-C positive photoresist show a 2D superposed photonic crystal composed of a periodically repeated hexagonal pattern of hexagonal lattice cells, which is in close agreement with the computer simulation. Fabrication of a superposed structure by single exposure IL paves the way for studying 2D photonic crystal fabrication, surface lasing, optical waveguides, and so on.