Transformation of cell wall pectin profile during postharvest ripening process alters drying behavior and regulates the sugar content of dried plums.

This study evaluated the effects of postharvest ripening (0-6 days, D0-6) on cell wall pectin profile, infrared-assisted hot air-drying characteristics, and sugar content. Results showed that during postharvest ripening progress, the content of water-soluble pectin (WSP) and chelate-soluble pectin (CSP) increased while the content of Na2CO3-soluble pectin (NSP) and hemicellulose (HC) decreased. In addition, the average molecular weight of WSP increased while the average molecular weight of NSP decreased. Secondly, the drying time of plums with different postharvest ripening periods was in the order: D3 < D4 < D2 < D1 < D0 < D5 < D6. Furthermore, the sugar content of dried plums was mainly influenced by drying time, with three stages of sugar changes observed, tied to moisture content: (1) Sucrose hydrolyzes (50-85%); (2) Fructose and glucose degrade (15-50%); (3) Sorbitol degrades (15-42%). These findings indicate that the transformation of cell wall pectin profile during the postharvest ripening process alters drying behavior and regulates the sugar content of dried plums. CHEMICAL COMPOUNDS STUDIED IN THIS ARTICLE: Galacturonic acid (PubChem CID: 439215); Acetone (PubChem CID: 180); Distilled water (PubChem CID: 962); Trans-1,2-Diaminocyclohexane-N, N, N, N'-tetraacetic acid (PubChem CID: 2723845); Na2CO3 (PubChem CID: 10340); Glucose (PubChem CID: 5793); fructose (PubChem CID: 2723872) sucrose (PubChem CID: 5988) sorbitol (PubChem CID: 5780) and Sodium borohydride (PubChem CID: 4311764).

[Spatiotemporal Distribution Characteristics of Air Pollution and Health Risks in Key Cities of China].

Based on the monitoring data of five pollutants in 168 key cities under air pollution prevention and control in China from 2015 to 2020, using the MAKESENS model and the aggregate risk index(ARI), this study quantitatively analyzed the spatial and temporal distribution characteristics of air pollution and health risks in China and the six urban agglomerations. The results showed that:① PM2.5 pollution was the most serious pollution in Chinese key cities. Only 15% of the cities' six-year average concentrations of PM2.5 reached the National Secondary Standard, followed by that of NO2; 77% of the cities' six-year average concentrations of NO2 reached the National Secondary Standard. The urban agglomerations of Beijing-Tianjin-Hebei and Fenwei plain had the most serious air pollution, and the six-year average concentrations of PM2.5, SO2, CO, and NO2 were higher than those of other urban agglomerations. ② The concentrations of PM2.5, SO2, CO, and NO2 in key cities of China showed a decreasing trend, whereas the concentration of O3 in other urban agglomerations showed an increasing trend, except in the Chengdu-Chongqing urban agglomeration. The concentration of SO2 in the urban agglomerations of Beijing-Tianjin-Hebei and Fenwei plain changed the most significantly. ③ The health risk of air pollution in the key cities of China generally showed a decreasing trend, with a sharp decline from 2017 to 2018, and the population exposed to extremely high risks dropped from 160 million to 32.54 million. The urban agglomeration in the middle reaches of the Yangtze River had the most significant decline in health risks, whereas the key cities in China faced higher health risks in spring and winter seasons. ④ The Beijing-Tianjin-Hebei and Fenwei plain urban agglomerations had the highest health risks, and the urban agglomeration in the middle reaches of the Yangtze River had the lowest; O3 gradually replaced PM2.5 as the main pollutant affecting the health risk. These results can provide a reference for evaluating the effectiveness of urban air pollution control in China during the 13th Five-Year Plan period.

[Spatiotemporal Evolution Characteristics of PM2.5-O3 Compound Pollution in Chinese Cities from 2015 to 2020].

Based on the monitoring data of PM2.5 and O3 concentrations in 333 cities in China from 2015 to 2020, using spatial clustering, trend analysis, and the geographical gravity model, this study quantitatively analyzed the characteristics of PM2.5-O3 compound pollution concentrations and its spatiotemporal dynamic evolution pattern in major cities in China. The results showed that:① there was a synergistic change in PM2.5 and O3 concentrations. When ρ(PM2.5_mean) ≤ 85 µg·m-3, for every 10 µg·m-3 increase in ρ(PM2.5_mean), the peak of the mean value of ρ(O3_perc90) increased by 9.98 µg·m-3. When ρ(PM2.5_mean) exceeded the national Grade II standards of (35±10) µg·m-3, the peak of the mean value of ρ(O3_perc90) increased the fastest, with an average growth rate of 11.81%. In the past six years, on average, 74.97% of Chinese cities with compound pollution had a ρ(PM2.5_mean) in the range of 45 to 85 µg·m-3. When ρ(PM2.5_mean)>85 µg·m-3, the mean value of ρ(O3_perc90) showed a significant decreased trend. ② The spatial clustering pattern of PM2.5 and O3 concentrations in Chinese cities was similar, and hot spots of the six-year mean values of ρ(PM2.5_mean) and ρ(O3_perc90) were distributed in the Beijing-Tianjin-Hebei urban agglomeration and other cities in the Shanxi, Henan, and Anhui provinces. ③ The number of cities with PM2.5-O3 compound pollution showed an interannual variation trend of increasing first (2015-2018) and then decreasing (2018-2020) and a seasonal trend of gradually decreasing from spring to winter. Further, the compound pollution phenomenon mainly occurred in the warm season (April to October). ④ The spatial distribution of PM2.5-O3 compound polluted cities was changing from dispersion to aggregation. From 2015 to 2017, the compound polluted areas spread from the eastern coastal areas to the central and western regions of China, and by 2017, a large-scale polluted area centered on the Beijing-Tianjin-Hebei urban agglomeration, the Central Plains urban agglomeration, and surrounding areas was formed. ⑤ The migration directions of PM2.5 and O3 concentration centers were similar, and there were obvious trends of moving westward and northward. The problem of high-concentration compound pollution was concentrated and highlighted in cities in central and northern China. In addition, since 2017, the distance between the centers of gravity of PM2.5 and O3 concentrations in the compound polluted areas had been significantly reduced, with a reduction of nearly 50%.

Black carbon pollution in China from 2001 to 2019: Patterns, trends, and drivers.

Based on a near real-time 10 km × 10 km resolution black carbon (BC) concentration dataset, this study investigated the spatial patterns, trend variations, and drivers of BC concentrations in China from 2001 to 2019 with spatial analysis, trend analysis, hotspot clustering, and multiscale geographically weighted regression (MGWR). The results indicate that Beijing-Tianjin-Hebei, the Chengdu-Chongqing agglomeration, Pearl River Delta, and East China Plain were the hotspot centers of BC concentration in China. From 2001 to 2019, the average rate of decline in BC concentrations across China was 0.36 µg/m3/year (p < 0.001), with BC concentrations peaking around 2006 and sustaining a decline for the next decade or so. The rate of BC decline was higher in Central, North, and East China than in other regions. The MGWR model revealed the spatial heterogeneity of the influences of different drivers. A number of enterprises had significant effects on BC in East, North, and Southwest China; coal production had strong effects on BC in Southwest and East China; electricity consumption had better effects on BC in Northeast, Northwest, and East China than in other regions; the ratio of secondary industries had the greatest effects on BC in North and Southwest China; and CO2 emissions had the strongest effects on BC in East and North China. Meanwhile, the reduction of BC emissions from the industrial sector was the dominant factor in the decrease of BC concentration in China. These findings provide references and policy prescriptions for how cities in different regions can reduce BC emissions.

α-Tubulin acetylation at lysine 40 regulates dendritic arborization and larval locomotion by promoting microtubule stability in Drosophila.

Posttranslational modification of tubulin increases the dynamic complexity and functional diversity of microtubules. Acetylation of α-tubulin at Lys-40 is a highly conserved posttranslational modification that has been shown to improve the flexibility and resilience of microtubules. Here we studied the in vivo functions of α-tubulin acetylation by knocking-out Atat, the Drosophila α-tubulin acetyltransferase, and by mutating Lys-40 to Arg in α1-tubulin. We found a reduction in the dendritic arborization of larval class I dendritic arborization (da) neurons in both mutants. The dendritic developmental defects in atat mutants could be reversed by enhancing the stability of microtubules either through knocking down the microtubule severing protein Katanin 60 or through overexpressing tubulin-specific chaperone E, suggesting that α-tubulin deacetylation impairsed dendritic morphology by decreasing the stability of microtubules. Using time-lapse recordings, we found that atat and α1-tubulinK40R mutations dramatically increased the number of dendritic protrusions that were likely to be immature dendritic precursors. Finally, we showed that both Atat and α-tubulin acetylation were required in class I da neurons to control larval locomotion. These findings add novel insight into the current knowledge of the role of α-tubulin acetylation in regulating neuronal development and functions.

A Novel D-π-A Type Fluorescent Probe for Cu2+ Based on Styryl-Pyridinium Salts Conjugating Di-(2-picolyl)amine (DPA) Units.

A novel D-π-A type fluorescent probe L(NO3) for Cu (II) sensing was designed and fully characterized. The probe consists of a styryl-pyridine cation fluorescent group and a di-(2-picolyl)amine (DPA) receptor unit, which are linked by a phenyl group to form an electron donor-π-acceptor (D-π-A) conjugate system, especially the introduction of a nitrate counter anion for significantly enhanced water solubility of the probe. Fluorescence titration studies of the probe L(NO3) showed a higher selectivity for Cu2+ than other metal ions, and the emission spectrum was strongly quenched upon binding. The competitive binding assay and the low detection limit (0.932 µM) showed that the probe L(NO3) had strong anti-interference ability and excellent Cu2+ detection performance. The binding ratio of probe L(NO3) and Cu2+ was determined from Job's plot to be 1:1, which is consistent with the results obtained from X-ray crystal structures. Meanwhile, the probe showed instantaneous chemical reversibility when titrated with EDTA solution, indicating potential recycling properties of the probe. In addition, the design of inexpensive fluorescent test strips can perform the on-site and real-time detection Cu2+ with a color recognition application.

Ion exchange fabrication of lanthanide functionalized layered double hydroxides microcapsules for rapid and visual detection of anthrax biomarker.

Lanthanide ion probes have recently been considered as promising sensing materials due to their high sensitivity and good optical properties. Herein, the 3D hierarchical lanthanide functionalized layered double hydroxides microcapsules were synthesized via a facile ion exchange strategy and further developed as novel fluorescent probes for detecting trace amounts of the anthrax biomarker dipicolinicacid (DPA). Benefiting from the 3D porous superstructure and abundant unsaturated coordination sites of lanthanide ion, the ternary Ni-Fe-Ln-LDHs (Ln = Tb/Eu) not only possess a large reactive contact area to improve the sensitivity of DPA detection, but also demonstrate very fast reaction rate. The design of inexpensive fluorescent test strips can perform the on-site and real-time detection via a smartphone with a color recognition application. More prominently, the sensitivity of the system was evaluated by actual spore samples with the detection limit as low as 3.54 × 104 spores/mL. The 3D lanthanide functionalized LDHs nanoprobe constructed by ion exchange exhibits a new vision for the development of a sensing platform in other research areas.

Fucoxanthin prevents cell growth and induces apoptosis in endometrial cancer HEC-1A cells by the inhibition of the PI3K/Akt/mTOR pathway.

Endometrial cancer is the major type of gynecological cancer and ranks as the sixth most common cancer in women. Endometrial cancer usually is diagnosed in an advanced stage, complicating the treatments in many cases. The present research was focused on unveiling the in vitro anticancer role of fucoxanthin against the endometrial cancer HEC-1A cells by inhibiting the phosphatidylinositol-3-kinase/Akt/mammalian target of rapamycin (PI3K/Akt/mTOR) signaling axis. The cytotoxicity of fucoxanthin against the endometrial cancer HEC-1A cells was studied using the MTT test. The level of reactive oxygen species (ROS) production, mitochondrial membrane potential (MMP) status, and apoptotic cell death in the 7.5 and 10 µM administered HEC-1A cells were assayed using fluorescent staining techniques. The messenger RNA expression was analyzed using RT-PCR for PI3K/Akt/mTOR signaling molecules, proapoptotic (Bax and caspase-3) antiapoptotic (cyclin D1 and Bcl-2) genes, and inflammatory markers like tumour necrosis factor α (TNFα), nuclear factor kappa B (NF-κB), Cox-2, and interleukin (IL)-6. The cell viability assay proved that fucoxanthin effectively prevented HEC-1A cell viability, where the IC50 was 7.5 µM. Fucoxanthin at 7.5 and 10 µM remarkably improved ROS production and apoptosis and decreased the MMP in HEC-1A cells. The fucoxanthin effectively inhibited the PI3K/Akt/mTOR cascade along with the expression of TNF-α, NF-κB, Cox-2, and IL-6 and antiapoptotic genes cyclin D1 and Bcl-2 in the HEC-1A cells. Fucoxanthin treatment also enhanced the Bax and caspase-3 expressions in the HEC-1A cells. Our results from this work unveiled that fucoxanthin triggered growth inhibition and apoptosis in endometrial cancer HEC-1A cells. Besides, fucoxanthin inhibited the PI3K/Akt/mTOR cascade and improved apoptotic marker expressions in the HEC-1A cells.

Highly Controllable Hierarchically Porous Ag/Ag2 S Heterostructure by Cation Exchange for Efficient Hydrogen Evolution.

Establishing the hierarchical porous architectures has been considered to be the most efficient approach to realize the efficient mass diffusion and large exposed active sites of designed micro/nanomaterial catalysts for hydrogen evolution reactions (HER). In this work, the nonequivalent cation exchange strategy is developed to fabricate the hierarchically porous Ag/Ag2 S heterostructure based on the rapid cation exchange by the metal-organic framework (MOF)-derived CoS. The as-prepared Ag/Ag2 S inherits the original 3D hollow morphology of CoS with porous nature, possessing abundant S-vacancies and lattice strain simultaneously due to the coordination loss and in-situ epitaxial growth of metallic Ag on the surface. Owing to the optimizations of lattice and electronic structures, the unique hierarchically porous Ag/Ag2 S heterostructure exhibits superior catalytic performance than previously reported catalysts derived from MOF. Theoretical calculations have confirmed that the co-existence of Ag cluster and sulfur vacancies activates the electroactivity of the interfacial defective region to boost the HER process. The binding strength of the proton and energetic trend of HER has been optimized with the formation of Ag/Ag2 S heterostructure, which guarantees the efficient generation of H2 . This study opens a new strategy for the utilization of the nonequivalent cation exchange strategy to efficiently synthesize advanced electrocatalysts with high performances.

A BODIPY-carbazole hybrid as a fluorescent probe: the design, synthesis, and discrimination of surfactants and the determination of the CMC values.

Surfactants play important roles in chemical industries and have become well-known environmental pollutants owing to their extensive use in different fields. In this work, we reported a fluorescent probe, namely, BDP-Zn2+ for the discrimination of four kinds of surfactants and the determination of CMC values. BDP-Zn2+ was composed of covalently linked BODIPY, carbazole, N,N-bis(2-pyridylmethyl)ethylenediamine (BPEA) and zinc ions to fabricate a novel push-pull molecular structure. Upon the addition of surfactants, the probe exhibited a turn-on fluorescence response and the emission was enhanced on increasing the surfactant concentrations. This indicated that the fluorescence intensity and the ratios of the emission at 607 nm to that at 514 nm as fingerprints could be used to identify the CMC values of the surfactants. Our current work provides an alternative method to efficiently discriminate different surfactants for the further studies of their physical and chemical functions.

The relationship between impulsivity and self-injury in Chinese undergraduates: The chain mediating role of stressful life events and negative affect.

BACKGROUND: Self-injury is one of the strongest predictors of suicide. Undergraduates have been recognized as one of the populations with the highest incidence of self-injury. A substantial body of literature has documented the important influence of impulsivity on self-injury. However, few studies have focused on the mediating mechanisms underlying this relationship. Based on the stress generation hypothesis and the affect-regulation model of self-injury, this study constructed a chain mediating model to examine whether stressful life events and negative affect mediated the relationship between impulsivity and self-injury among Chinese undergraduates. METHODS: A total of 2270 undergraduates (69.8% female, mean age = 19 years) were recruited to participate in this study and completed self-report measures of impulsivity, self-injury, stressful life events and negative affect. RESULTS: (1) There were significant positive correlations among impulsivity, stressful life events, negative affect and self-injury. (2) After controlling for the effect of gender, impulsivity still had a significant positive effect on self-injury. (3) Undergraduates' self-injury was affected by impulsivity partly through 3 different pathways: the mediating role of stressful life events, the mediating role of negative affect, and the chain mediating role of both stressful life events and negative affect. CONCLUSIONS: These findings contribute to a more comprehensive understanding of the risk factors for self-injury. Impulsivity, stressful life events, and negative affect might increase the occurrence of self-injury. In addition, the chain mediating effect of stressful life events and negative affect plays an important role in the occurrence of self-injury.

Water-soluble AIE-Active Fluorescent Organic Nanoparticles: Design, Preparation and Application for Specific Detection of Cysteine over Homocysteine and Glutathione in Living Cells.

Water-soluble ratiometric AIE-active fluorescent organic nanoparticles 2OA-FON for the specific sensing of cysteine over other biothiols are reported. The obtained amphiphilic probe included olefin aldehyde as recognizing unit, tetraphenylethylene as fluorescence reporter and lactose moiety as a hydrophilic group. This work provides a general design strategy based on the introduction of a sugar moiety into a hydrophobic AIEgen to develop ratiometric water-soluble fluorescent organic nanoparticles.

The Role of Interpersonal Problems and Family Environment in the Association Between Impulsivity and Suicidal Ideation: A Moderate Mediation Model.

Impulsivity, interpersonal problems, and family environment are important factors in the development of suicidal ideation, but the pathway of these factors on suicidal ideation is not clear. This study constructed a moderated mediation model to examine whether interpersonal problems mediated the relationship between impulsivity and suicidal ideation and whether this mediating process was moderated by family environment. For this purpose, 902 college students from Tianjin Normal University located in the north of China were recruited to participate in this study with Barratt Impulsiveness Scale, Adolescent Self-Rating Life Events Check List, Family Environment Scale, and Beck Scale for Suicidal Ideation. Impulsivity could significantly predict suicidal ideation, and the relationship between impulsivity and suicidal ideation was significantly mediated by interpersonal problems; furthermore, the mediating effect and the directing effect were significantly moderated by family environment. These findings contribute to our understanding of a comprehensive interpretation of both environmental and individual factors' impacts on suicidal ideation.