ABSTRACT
Decontamination of solutions containing Cu(II) complexes with tartrate, glycine and quadrol (N,N,N'N'-tetrakis(2-hydroxypropyl)ethylenediamine) using metallic iron depends on pH and proceeds best in mildly acidic solutions. Cu(II) is completely removed from all solutions containing the ligands investigated. The degree of ligand removal from solutions considerably differs. Tartrate is relatively rapidly and completely removed from solutions. A complete removal of glycine is prolonged. The removal of quadrol from solutions using metallic iron is negligible. Electrochemical investigations showed that tartrate and glycine have inhibitory influence on anodic dissolution of iron at pH 2 and enhance it at pH 4. Quadrol does not exhibit any significant influence on iron dissolution. Chemical analysis and FT-IR investigations have shown that the content of organic compounds is the greatest in the precipitate formed in solutions containing tartrate, while it is considerably lower in glycine containing solutions. The precipitate formed in quadrol-containing solutions during the treatment with metallic iron contains only negligible amount of organics.
Subject(s)
Copper/chemistry , Ethylenediamines/chemistry , Glycine/chemistry , Ions , Metals/chemistry , Tartrates/chemistry , Waste Disposal, Fluid/methods , Carbon/chemistry , Copper/isolation & purification , Electrochemistry/methods , Hydrogen-Ion Concentration , Iron/chemistry , Ligands , Models, Chemical , Solutions , Spectroscopy, Fourier Transform InfraredABSTRACT
EDTA removal from solutions using metallic iron was carried out at different values of pH, iron load and concentrations at free access of air and in closed vessels. The EDTA destruction was investigated using chemical and capillary electrophoresis analysis. Fe corrosion was studied voltammetrically and the composition of the precipitate formed was investigated using FT-IR spectroscopy and chemical analysis. The EDTA decomposition is remarkably enhanced by the addition of Cu(II) to the EDTA solutions and access of air. The precipitation of the derivatives of insoluble Fe with EDTA or its decomposition products proceeds along with the destruction of EDTA. In closed systems the main EDTA removal reaction is precipitation with iron ions.
Subject(s)
Chelating Agents/isolation & purification , Edetic Acid/isolation & purification , Iron/chemistry , Copper/chemistry , Electrolytes , Electrophoresis, Capillary , Hydrogen-Ion Concentration , Indicators and Reagents , Oxidation-Reduction , Oxygen/chemistry , Solutions , Spectrophotometry, UltravioletABSTRACT
To decontaminate spent offset-printing developer Polychrome 4003, several microorganisms were separated from the soil that has been used for developer dumping for 3 years. Two organism cultures were isolated and identified to genus Geomyces pannorum and Bacteria spp. These organisms, as well as commercial Septic Gobbler (SG) bacteria, were used to decontaminate the developer. Reduction of both the chemical oxygen demand (COD) and the amount of total identified organic compounds reached 30% after 40 day treatment of waste suspension by G. pannorum and Bacteria spp. A substantially higher degree of COD reduction by approximately 80% and the total amount of identified organic compounds by approximately 90% was achieved when SG bacteria have been applied for the same period. According to a rapid electrophysiological test with macrophytic algae Nitellopsis obtusa, the toxicity of spent offset-printing developer Polychrome 4003 was classified as extremely toxic (>100 toxic units, T.U.), and it remained at the same level after treatment with G. pannorum and Bacteria spp. More effective biodegradation with SG bacteria diminished toxicity substantially.
