Effect of olive-derived antioxidants (3,4-dihydroxyphenylethanol and 3,4 dihydroxyphenylglycol) on sperm motility and fertility in liquid ram sperm stored at 15°C or 5°C.

The aim of the present study was to evaluate the effect of the addition of two olive oil-derived antioxidants, hydroxytyrosol (3,4-dihydroxyphenylethanol, HT) and 3,4-dihydroxyphenylglycol (DHPG), on ovine semen during liquid storage at 5°C and 15°C. Semen was collected, pooled, diluted and then divided into aliquots supplemented with different concentrations (5 µg/ml, 10 µg/ml, 50 µg/ml and 100 µg/ml) of HT, DHPG and a mixture (MIX) of both antioxidants. Sperm motility characteristics were assessed in the different samples at 0, 6, 24, 48, 72 and 96 hr after cooling, and a fertility trial was also conducted. The results showed that the antioxidant addition did not significantly improve total and progressive motility in ovine cooled sperm maintained at 15° or 5°C. However, in samples stored at 5°C, LIN (48, 72, 96 hr), STR (0 hr) and WOB (0, 48, 72, 96 hr) values significantly decreased in comparison with control treatment when high antioxidant concentrations were added (MIX100 or HT100). When samples were maintained at 15°C, MIX50 showed significantly higher VCL values than the control treatment after 6 hr cooling, and MIX100 showed significantly lower VCL values at 96 hr after cooling. According to the artificial insemination trial, no significant differences were observed when antioxidants were added. In conclusion, the use of HT and DHPG showed small impact in sperm motility and fertility was not affected (nor detrimentally nor positively) when insemination was carried out using antioxidant-supplemented liquid sperm.

Effect of three commercial extenders on sperm motility and fertility in liquid ram semen stored at 15 °C or 5 °C.

The effect of different extenders on sperm motility and fertility was evaluated during liquid storage of ram semen at 5 °C and 15 °C. The semen was collected, pooled and diluted in three commercial extenders: Inra 96® (INRA) based on skimmed milk, Biladyl® A fraction (BIL) based on egg yolk, and Ovixcell® (OVIX) based on soybean lecithin. Then, sperm motility was evaluated at 0, 6, 24, 48, 72 and 96 h. In order to evaluate fertility, samples stored at 15 °C were used after dilution in INRA and OVIX. Results showed that progressive motility was significantly higher up to 72 h of storage in sperm samples maintained at 5 °C in comparison with 15 °C, similarly for each tested diluent. When samples were stored at 5 °C in OVIX, kinematic parameters such as velocity (except curvilinear velocity, VCL), trajectory [linearity (LIN), straightness (STR), wobble (WOB)], amplitude of lateral head displacement (ALH) and beat/cross frequency (BCF) were higher than in INRA and BIL. No significant differences in pregnancy rate were detected between INRA (62.6%) and OVIX (58.9%). In conclusion, liquid storage at 5 °C with OVIX extender is an interesting option since non-animal components are used, and this extender offers similar in vitro and in vivo efficacy as other extenders containing animal components.

A Review of Pellets from Different Sources.

The rise in pellet consumption has resulted in a wider variety of materials for pellet manufacture. Thus, pellet industry has started looking for alternative products, such as wastes from agricultural activities, forestry and related industries, along with the combination thereof, obtaining a broad range of these products. In addition, the entry into force of EN ISO 17225 standard makes wood pellet market (among other types) possible for industry and household purposes. Therefore, wastes that are suitable for biomass use have recently increased. In this study, the main characteristics of ten kinds of laboratory-made pellets from different raw materials were analyzed. Thus, we have focused on the most limiting factors of quality standards that determine the suitability for biomass market, depending on the kind of pellet. The results showed considerable differences among the analyzed pellets, exceeding the limits established by the standard in almost all cases, especially concerning ash content and N and S composition. The requirements of the studied standard, very demanding for certain factors, disable the entry of these densified wastes in greater added value markets.

Control of several emissions during olive pomace thermal degradation.

Biomass plays an important role as an energy source, being an interesting alternative to fossil fuels due to its environment-friendly and sustainable characteristics. However, due to the exposure of customers to emissions during biomass heating, evolved pollutants should be taken into account and controlled. Changing raw materials or mixing them with another less pollutant biomass could be a suitable step to reduce pollution. This work studied the thermal behaviour of olive pomace, pyrenean oak and their blends under combustion using thermogravimetric analysis. It was possible to monitor the emissions released during the process by coupling mass spectrometry analysis. The experiments were carried out under non-isothermal conditions at the temperature range 25-750 °C and a heating rate of 20 °C·min⁻¹. The following species were analysed: aromatic compounds (benzene and toluene), sulphur emissions (sulphur dioxide), 1,4-dioxin, hydrochloric acid, carbon dioxide and nitrogen oxides. The results indicated that pollutants were mainly evolved in two different stages, which are related to the thermal degradation steps. Thus, depending on the pollutant and raw material composition, different emission profiles were observed. Furthermore, intensity of the emission profiles was related, in some cases, to the composition of the precursor.

Analysis of Pelletizing of Granulometric Separation Powder from Cork Industries.

Cork industries generate a considerable amount of solid waste during their processing. Its management implies a problem for companies that should reconsider its reuse for other purposes. In this work, an analysis of pelletizing of granulometric separation powder, which is one of the major wastes in cork industries and which presents suitable properties (as an raw material) for its thermal use, is studied. However, its characteristic heterogeneity, along with its low bulk density (which makes its storage and transportation difficult) are restrictive factors for its energy use. Therefore, its densified form is a real alternative in order to make the product uniform and guarantee its proper use in boiler systems. Thus, the cork pellets (from granulometric separation powder) in the study met, except for ash content specification, the specifications in standard European Norm EN-Plus (B) for its application as fuel for domestic use.