Photo-induced semimetallic states realised in electron-hole coupled insulators.

Using light to manipulate materials into desired states is one of the goals in condensed matter physics, since light control can provide ultrafast and environmentally friendly photonics devices. However, it is generally difficult to realise a photo-induced phase which is not merely a higher entropy phase corresponding to a high-temperature phase at equilibrium. Here, we report realisation of photo-induced insulator-to-metal transitions in Ta2Ni(Se1-xSx)5 including the excitonic insulator phase using time- and angle-resolved photoemission spectroscopy. From the dynamic properties of the system, we determine that screening of excitonic correlations plays a key role in the timescale of the transition to the metallic phase, which supports the existence of an excitonic insulator phase at equilibrium. The non-equilibrium metallic state observed unexpectedly in the direct-gap excitonic insulator opens up a new avenue to optical band engineering in electron-hole coupled systems.

Ultrafast dissolution and creation of bonds in IrTe2 induced by photodoping.

The observation and control of interweaving spin, charge, orbital, and structural degrees of freedom in materials on ultrafast time scales reveal exotic quantum phenomena and enable new active forms of nanotechnology. Bonding is the prime example of the relation between electronic and nuclear degrees of freedom. We report direct evidence illustrating that photoexcitation can be used for ultrafast control of the breaking and recovery of bonds in solids on unprecedented time scales, near the limit for nuclear motions. We describe experimental and theoretical studies of IrTe2 using femtosecond electron diffraction and density functional theory to investigate bonding instability. Ir-Ir dimerization shows an unexpected fast dissociation and recovery due to the filling of the antibonding dxy orbital. Bond length changes of 20% in IrTe2 are achieved by effectively addressing the bonds directly through this relaxation process. These results could pave the way to ultrafast switching between metastable structures by photoinduced manipulation of the relative degree of bonding in this manner.

Metastable Superconductivity in Two-Dimensional IrTe2 Crystals.

Two-dimensional (2D) materials exhibit unusual physical and chemical properties that are attributed to the thinning-induced modification of their electronic band structure. Recently, reduced thickness was found to dramatically impact not only the static electronic structure, but also the dynamic ordering kinetics. The ordering kinetics of first-order phase transitions becomes significantly slowed with decreasing thickness, and metastable supercooled states can be realized by thinning alone. We therefore focus on layered iridium ditelluride (IrTe2), a charge-ordering system that is transformed into a superconductor by suppressing its first-order transition. Here, we discovered a persistent superconducting zero-resistance state in mechanically exfoliated IrTe2 thin flakes. The maximum superconducting critical temperature ( Tc) was identical to that which is chemically optimized, and the emergent superconductivity was revealed to have a metastable nature. The discovered robust metastable superconductivity suggests that 2D material is a new platform to induce, control, and functionalize metastable electronic states that are inaccessible in bulk crystals.

Ultrafast Electronic Band Gap Control in an Excitonic Insulator.

We report on the nonequilibrium dynamics of the electronic structure of the layered semiconductor Ta_{2}NiSe_{5} investigated by time- and angle-resolved photoelectron spectroscopy. We show that below the critical excitation density of F_{C}=0.2 mJ cm^{-2}, the band gap narrows transiently, while it is enhanced above F_{C}. Hartree-Fock calculations reveal that this effect can be explained by the presence of the low-temperature excitonic insulator phase of Ta_{2}NiSe_{5}, whose order parameter is connected to the gap size. This work demonstrates the ability to manipulate the band gap of Ta_{2}NiSe_{5} with light on the femtosecond time scale.

A new way to synthesize superconducting metal-intercalated C60 and FeSe.

Doping with the optimum concentration of carriers (electrons or holes) can modify the physical properties of materials. Therefore, improved ways to achieve carrier doping have been pursued extensively for more than 50 years. Metal-intercalation is one of the most important techniques for electron doping of organic / inorganic solids, and has produced superconductors from insulators and metallic solids. The most successful examples are metal-intercalated graphite and C60 superconductors. Metal intercalation has been performed using solid-reaction and liquid solvent techniques. However, precise control of the quantity of intercalants in the target solids can be difficult to achieve using these methods, as that quantity depends largely on the initial conditions. Here we report an electrochemical method for metal-intercalation, and demonstrate the preparation of superconductors using organic and inorganic materials (C60 and FeSe). The metal atoms are effectively intercalated into the spaces in C60 and FeSe solids by supplying an electric current between electrodes in a solvent that includes electrolytes. The recorded superconducting transition temperatures, Tc's, were the same as those of metal-intercalated C60 and FeSe prepared using solid-reaction or liquid solvent techniques. This technique may open a new avenue in the search for organic / inorganic superconductors.

Exploration of new superconductors and functional materials, and fabrication of superconducting tapes and wires of iron pnictides.

This review shows the highlights of a 4-year-long research project supported by the Japanese Government to explore new superconducting materials and relevant functional materials. The project found several tens of new superconductors by examining ∼1000 materials, each of which was chosen by Japanese experts with a background in solid state chemistry. This review summarizes the major achievements of the project in newly found superconducting materials, and the fabrication wires and tapes of iron-based superconductors; it incorporates a list of ∼700 unsuccessful materials examined for superconductivity in the project. In addition, described are new functional materials and functionalities discovered during the project.

Characteristic two-dimensional Fermi surface topology of high-Tc iron-based superconductors.

Unconventional Cooper pairing originating from spin or orbital fluctuations has been proposed for iron-based superconductors. Such pairing may be enhanced by quasi-nesting of two-dimensional electron and hole-like Fermi surfaces (FS), which is considered an important ingredient for superconductivity at high critical temperatures (high-Tc). However, the dimensionality of the FS varies for hole and electron-doped systems, so the precise importance of this feature for high-Tc materials remains unclear. Here we demonstrate a phase of electron-doped CaFe2As2 (La and P co-doped CaFe2As2) with Tc = 45 K, which is the highest Tc found for the AEFe2As2 bulk superconductors (122-type; AE = Alkaline Earth), possesses only cylindrical hole- and electron-like FSs. This result indicates that FS topology consisting only of two-dimensional sheets is characteristic of both hole- and electron-doped 122-type high-Tc superconductors.

Superconductivity in Ca10(Ir4As8)(Fe2As2)5 with Square-Planar Coordination of Iridium.

We report the unprecedented square-planar coordination of iridium in the iron iridium arsenide Ca(10)(Ir(4)As(8))(Fe(2)As(2))5. This material experiences superconductivity at 16 K. X-ray photoemission spectroscopy and first-principles band calculation suggest Ir(II) oxidation state, which yields electrically conductive Ir(4)As(8) layers. Such metallic spacer layers are thought to enhance the interlayer coupling of Fe(2)As(2), in which superconductivity emerges, thus offering a way to control the superconducting transition temperature.

Emergence of superconductivity at 45 K by lanthanum and phosphorus co-doping of CaFe2As2.

Co-doping of lanthanum and phosphorus in CaFe2As2 induces superconductivity at 45 K. This superconducting transition temperature is higher than the 38 K transition in Ba1-xKxFe2As2, which is the maximum found thus far among the 122 phases. Superconductivity with a substantial shielding volume fraction was observed at 0.12 ≤ x ≤ 0.18 and y = 0.06 in Ca1-xLaxFe2(As1-yPy)2. The superconducting phase of the present system seems to be not adjacent to an antiferromagnetic phase.

Spin-liquid state in the S=1/2 hyperkagome antiferromagnet Na4Ir3O8.

A spinel related oxide, Na(4)Ir(3)O(8), was found to have a three dimensional network of corner shared Ir(4+) (t(2g)(5)) triangles. This gives rise to an antiferromagnetically coupled S = 1/2 spin system formed on a geometrically frustrated hyperkagome lattice. Magnetization M and magnetic specific heat C(m) data showed the absence of long range magnetic ordering at least down to 2 K. The large C(m) at low temperatures is independent of applied magnetic field up to 12 T, in striking parallel to the behavior seen in triangular and kagome antiferromagnets reported to have a spin-liquid ground state. These results strongly suggest that the ground state of Na(4)Ir(3)O(8) is a three dimensional manifestation of a spin liquid.

Anisotropy of the superconducting gap of the borocarbide superconductor YNi2B2C with ultrasonic attenuation.

The ultrasonic attenuation alpha of the highly anisotropic s-wave superconductor YNi2B2C has been measured for all the symmetrically independent elastic modes to explore the location of the zero superconducting gap region on the Fermi surface. The attenuation of the longitudinal mode shows a pronounced anisotropy in the superconducting state: While alpha shows a thermally activated behavior along [110] and [001] directions, it shows T-linear dependence along [100]. These results together with those for the transverse modes demonstrate the presence of point nodes or zero-gap regions along [100] and [010] directions. This is a clear demonstration of ultrasonic attenuation as a powerful probe for the structure of the anisotropic superconducting gap.