Silica-gentamicin nanohybrids: combating antibiotic resistance, bacterial biofilms, and in vivo toxicity.

INTRODUCTION: Antibiotic resistance is a growing concern in health care. Methicillin-resistant Staphylococcus aureus (MRSA), forming biofilms, is a common cause of resistant orthopedic implant infections. Gentamicin is a crucial antibiotic preventing orthopedic infections. Silica-gentamicin (SiO2-G) delivery systems have attracted significant interest in preventing the formation of biofilms. However, compelling scientific evidence addressing their efficacy against planktonic MRSA and MRSA biofilms is still lacking, and their safety has not extensively been studied. MATERIALS AND METHODS: In this work, we have investigated the effects of SiO2-G nanohybrids against planktonic MRSA as well as MRSA and Escherichia coli biofilms and then evaluated their toxicity in zebrafish embryos, which are an excellent model for assessing the toxicity of nanotherapeutics. RESULTS: SiO2-G nanohybrids inhibited the growth and killed planktonic MRSA at a minimum concentration of 500 µg/mL. SiO2-G nanohybrids entirely eradicated E. coli cells in biofilms at a minimum concentration of 250 µg/mL and utterly deformed their ultrastructure through the deterioration of bacterial shapes and wrinkling of their cell walls. Zebrafish embryos exposed to SiO2-G nanohybrids (500 and 1,000 µg/mL) showed a nonsignificant increase in mortality rates, 13.4±9.4 and 15%±7.1%, respectively, mainly detected 24 hours post fertilization (hpf). Frequencies of malformations were significantly different from the control group only 24 hpf at the higher exposure concentration. CONCLUSION: Collectively, this work provides the first comprehensive in vivo assessment of SiO2-G nanohybrids as a biocompatible drug delivery system and describes the efficacy of SiO2-G nanohybrids in combating planktonic MRSA cells and eradicating E. coli biofilms.

Nanosilver-Silica Composite: Prolonged Antibacterial Effects and Bacterial Interaction Mechanisms for Wound Dressings.

Infected superficial wounds were traditionally controlled by topical antibiotics until the emergence of antibiotic-resistant bacteria. Silver (Ag) is a kernel for alternative antibacterial agents to fight this resistance quandary. The present study demonstrates a method for immobilizing small-sized (~5 nm) silver nanoparticles on silica matrix to form a nanosilver-silica (Ag-SiO₂) composite and shows the prolonged antibacterial effects of the composite in vitro. The composite exhibited a rapid initial Ag release after 24 h and a slower leaching after 48 and 72 h and was effective against both methicillin-resistant Staphylococcus aureus (MRSA) and Escherichia coli ( E . coli ). Ultraviolet (UV)-irradiation was superior to filter-sterilization in retaining the antibacterial effects of the composite, through the higher remaining Ag concentration. A gauze, impregnated with the Ag-SiO₂ composite, showed higher antibacterial effects against MRSA and E . coli than a commercial Ag-containing dressing, indicating a potential for the management and infection control of superficial wounds. Transmission and scanning transmission electron microscope analyses of the composite-treated MRSA revealed an interaction of the released silver ions with the bacterial cytoplasmic constituents, causing ultimately the loss of bacterial membranes. The present results indicate that the Ag-SiO₂ composite, with prolonged antibacterial effects, is a promising candidate for wound dressing applications.

Silica-Gentamicin Nanohybrids: Synthesis and Antimicrobial Action.

Orthopedic applications commonly require the administration of systemic antibiotics. Gentamicin is one of the most commonly used aminoglycosides in the treatment and prophylaxis of infections associated with orthopedic applications, but gentamicin has a short half-life. However, silica nanoparticles (SiO2 NPs) can be used as elegant carriers for antibiotics to prolong their release. Our goal is the preparation and characterization of SiO2-gentamicin nanohybrids for their potential antimicrobial administration in orthopedic applications. In vitro gentamicin release profile from the nanohybrids (gentamicin-conjugated SiO2 NPs) prepared by the base-catalyzed precipitation exhibited fast release (21.4%) during the first 24 h and further extension with 43.9% release during the five-day experiment. Antimicrobial studies of the SiO2-gentamicin nanohybrids versus native SiO2 NPs and free gentamicin were performed against Bacillus subtilis (B. subtilis), Pseudomonas fluorescens (P. fluorescens) and Escherichia coli (E. coli). SiO2-gentamicin nanohybrids were most effective against B. subtilis. SiO2 NPs play no antimicrobial role. Parallel antimicrobial studies for the filter-sterilized gentamicin were performed to assess the effect of ultraviolet (UV)-irradiation on gentamicin. In summary, the initial fast gentamicin release fits the need for high concentration of antibiotics after orthopedic surgical interventions. Moreover, the extended release justifies the promising antimicrobial administration of the nanohybrids in bone applications.

Regulation of cell-based therapeutic products intended for human applications in the EU.

AIMS: Recent developments in the field of cell-based therapeutic products (CBTPs) have forced the EU to revise its legislation on therapeutic products by enacting several new legal instruments. In this study, we investigate how CBTPs are regulated and what determines their regulatory classification. Furthermore, we compare the regulatory burden between CBTPs in different product categories. MATERIALS & METHODS: Product categories covering CBTPs were identified and characteristics critical for the regulatory classification of a CBTP were determined in each category. The effect of the critical characteristics on the classification was evaluated by constructing a decision tree that covers all possible combinations of the critical characteristics. Differences in the regulatory burden between CBTPs were evaluated by comparing regulations crucial for placing a therapeutic product on the EU market between the product categories. RESULTS: Regulation of CBTPs has been divided between the main product categories of the EU legal framework for therapeutic products on the basis of the characteristics of the cells that the CBTPs contain. The regulatory burden is lowest for CBTPs regulated as blood, cells or tissues, and highest for CBTPs regulated as medicinal products. CONCLUSION: CBTPs exist in all product categories of the EU legal framework for therapeutic products. However, the current framework does not cover all possible CBTPs. Furthermore, our results indicate that the regulatory burden of a CBTP is related to the risk it may pose to the health and safety of recipients.

Monitoring mitochondrial inner membrane potential for detecting early changes in viability of bacterium-infected human bone marrow-derived mesenchymal stem cells.

INTRODUCTION: One of the most challenging safety issues in the manufacture of cell based medicinal products is the control of microbial risk as cell-based products cannot undergo terminal sterilization. Accordingly, sensitive and reliable methods for detection of microbial contamination are called for. As mitochondrial function has been shown to correlate with the viability and functionality of human mesenchymal stem cells (hMSCs) we have studied the use of a mitochondrial inner membrane potential sensitive dye for detecting changes in the function of mitochondria following infection by bacteria. METHODS: The effect of bacterial contamination on the viability of bone marrow-derived mesenchymal stem cells (BMMSCs) was studied. BMMSC lines were infected with three different bacterial species, namely two strains of Pseudomonas aeruginosa, three strains of Staphylococcus aureus, and three strains of Staphylococcus epidermidis. The changes in viability of the BMMSCs after bacterial infection were studied by staining with Trypan blue, by morphological analysis and by monitoring of the mitochondrial inner membrane potential. RESULTS: Microscopy and viability assessment by Trypan blue staining showed that even the lowest bacterial inocula caused total dissipation of BMMSCs within 24 hours of infection, similar to the effects seen with bacterial loads which were several magnitudes higher. The first significant signs of damage induced by the pathogens became evident after 6 hours of infection. Early changes in mitochondrial inner membrane potential of BMMSCs were evident after 4 hours of infection even though no visible changes in viability of the BMMSCs could be seen. CONCLUSIONS: Even low levels of bacterial contamination can cause a significant change in the viability of BMMSCs. Moreover, monitoring the depolarization of the mitochondrial inner membrane potential may provide a rapid tool for early detection of cellular damage induced by microbial infection. Accordingly, mitochondrial analyses offer sensitive tools for quality control and monitoring of safety and efficacy of cellular therapy products.

CD200 positive human mesenchymal stem cells suppress TNF-alpha secretion from CD200 receptor positive macrophage-like cells.

Human mesenchymal stem cells (hMSCs) display immunosuppressive properties in vitro and the potential has also been transferred successfully to clinical trials for treatment of autoimmune diseases. OX-2 (CD200), a member of the immunoglobulin superfamily, is widely expressed in several tissues and has recently been found from hMSCs. The CD200 receptor (CD200R) occurs only in myeloid-lineage cells. The CD200-CD200R is involved in down-regulation of several immune cells, especially macrophages. The present study on 20 hMSC lines shows that the CD200 expression pattern varied from high (CD200Hi) to medium (CD200Me) and low (CD200Lo) in bone marrow-derived mesenchymal stem cell (BMMSC) lines, whereas umbilical cord blood derived mesenchymal stem cells (UCBMSCs) were constantly negative for CD200. The role of the CD200-CD200R axis in BMMSCs mediated immunosuppression was studied using THP-1 human macrophages. Interestingly, hMSCs showed greater inhibition of TNF-α secretion in co-cultures with IFN-γ primed THP-1 macrophages when compared to LPS activated cells. The ability of CD200Hi BMMSCs to suppress TNF-α secretion from IFN-γ stimulated THP-1 macrophages was significantly greater when compared to CD200Lo whereas UCBMSCs did not significantly reduce TNF-α secretion. The interference of CD200 binding to the CD200R by anti-CD200 antibody weakened the capability of BMMSCs to inhibit TNF-α secretion from IFN-γ activated THP-1 macrophages. This study clearly demonstrated that the efficiency of BMMSCs to suppress TNF-α secretion of THP-1 macrophages was dependent on the type of stimulus. Moreover, the CD200-CD200r axis could have a previously unidentified role in the BMMSC mediated immunosuppression.

Mitochondrial function and energy metabolism in umbilical cord blood- and bone marrow-derived mesenchymal stem cells.

Human mesenchymal stem cells (hMSCs) are an attractive choice for a variety of cellular therapies. hMSCs can be isolated from many different tissues and possess unique mitochondrial properties that can be used to determine their differentiation potential. Mitochondrial properties may possibly be used as a quality measure of hMSC-based products. Accordingly, the present work focuses on the mitochondrial function of hMSCs from umbilical cord blood (UCBMSC) cells and bone marrow cells from donors younger than 18 years of age (BMMSC <18) and those more than 50 years of age (BMMSC >50). Changes of ultrastructure and energy metabolism during osteogenic differentiation in all hMSC types were studied in detail. Results show that despite similar surface antigen characteristics, the UCBMSCs had smaller cell surface area and possessed more abundant rough endoplasmic reticulum than BMMSC >50. BMMSC <18 were morphologically more UCBMSC-like. UCBMSC showed dramatically higher mitochondrial-to-cytoplasm area ratio and elevated superoxide and manganese superoxide dismutase (MnSOD) levels as compared with BMMSC >50 and BMMSC <18. All hMSCs types showed changes indicative of mitochondrial activation after 2 weeks of osteogenic differentiation, and the increase in mitochondrial-to-cytoplasm area ratio appears to be one of the first steps in the differentiation process. However, BMMSC >50 showed a lower level of mitochondrial maturation and differentiation capacity. UCBMSCs and BMMSCs also showed a different pattern of exocytosed proteins and glycoproteoglycansins. These results indicate that hMSCs with similar cell surface antigen expression have different mitochondrial and functional properties, suggesting different maturation levels and other significant biological variations of the hMSCs. Therefore, it appears that mitochondrial analysis presents useful characterization criteria for hMSCs intended for clinical use.

Mitochondrial function determines the viability and osteogenic potency of human mesenchymal stem cells.

Advanced therapies medicinal products (ATMPs) have introduced innovative cell-based products. However, the regulatory demands for characterization of ATMPs are currently unable to adequately address the safety of such products. As recent studies have emphasized the role of mitochondria in the osteogenic differentiation of human mesenchymal stem cells (hMSCs), we have studied in detail the viability and osteogenic differentiation potency of the hMSCs intended for use as ATMPs based on analyses of the mitochondrial inner membrane potential (DeltaPsi(m)). Flow cytometric measurement of 5,5',6,6'-tetrachloro-1,1',3,3'-tetraethylbenzimidazolcarbocyanine iodide (JC-1), propidium iodide fluorescence, and AnnexinV was employed to determine DeltaPsi(m), plasma membrane integrity, and organization of phosphatidylserine in plasma membrane, respectively, in cultured hMSCs. Apoptosis was induced by incubating cells at critical concentration (20 muM) of menadione. 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) was used as an indicator for cell proliferation and alkaline phosphatase activity and calcium deposition as indicators of osteogenic differentiation. Based on JC-1 fluorescence, cell morphology, organization of phosphatidylserine, and plasma membrane integrity, we could sort cells into four categories that represented different cell quality. A strong correlation between JC-1 and osteogenic differentiation was demonstrated for the first time and thus this analytical tool is suitable not only to determine cell viability but also to predict osteogenic differentiation of hMSC.

Toward a nontoxic poison: current trends in (European Union) biocides regulation.

The number of products containing biocides is increasing at the same time as the number of available biocides is decreasing. Biocides are biologically active chemicals with a vast area of applications where demands for maintaining product quality by use of biocides presents a major challenge for developers striving to meet emerging environmental concerns and fulfilling criteria for eco-labeled consumer products. Tightening regulations have, however, led to stagnation in the current development of new biocide chemistries, and the "nontoxic poison" has yet to be formulated. Accordingly, the present article presents a critical overview of European Union regulation of biocides and their usage and of some of the future challenges for meeting demands for environmentally safe products and processes in which biocides are used. The Biocidal Product Directive, which is presently implemented, is one focus in the present article. Regulations of environmental, health, and safety (EHS) risk classifications and their role in the future development of biocide-containing products are also discussed. Studying the biocide dilemma may provide tools for the chemical industry as whole for proactive anticipation of the effect of emerging regulatory demands on product development.

Differences in product information of biopharmaceuticals in the EU and the USA: implications for product development.

The Summary of Product Characteristics (SPC) approved by the European Medicines Agency (EMEA) and the Package Insert (PI) approved by the Food and Drug Administration (FDA) were examined for 32 biopharmaceutical products. The aim was to identify differences in the product information since such information may have an impact on the planning of global clinical development programmes. The EU SPC contained more detailed instructions to the prescriber, including the positioning of the product with regard to the stage of the disease and to other therapies. The approach to safety information, notably to contraindications and warnings was more conservative in the EU SPC. The conservative approach in the EU may reflect the central position of the SPC in risk management of new pharmaceuticals. A typical feature of the US PI was the detailed description of the efficacy and safety result of the pivotal clinical trials.

Manufacturing, regulatory and commercial challenges of biopharmaceuticals production: a Finnish perspective.

Biopharmaceuticals product development is a broad and multidisciplinary field. Science and technology are combined with new manufacturing, regulatory and commercial challenges. However, although there is ample literature on the molecular biology and biochemistry of products, the implementation of processes from test tube to commercial scale has not received similar attention. Consequently, the present study aims to highlight, from practical point of view, some of the key issues involved with manufacturing technologies of biopharmaceuticals at a commercial scale. Regulatory requirements and investments are also addressed based on the practical experiences of start-up and small companies. Finland is used as a case-example of such companies as this is a EU-member state with strong technological growth and rapidly increasing number of biotech companies.

Current issues in the regulation of human tissue-engineering products in the European Union.

Tissue engineering (TE) is an emerging technology that combines expertise in life sciences, clinical medicine, and engineering. Current challenges in TE include anticipating and streamlining appropriate regulation with product development. Consequently this study has focused on views of developers, companies, and regulators on biological risks of TE products, aspects of commercial applications, and patentability. Most concerns about TE products focus on risk of cancer formation, infection risk, and rejection risk. Thus, at the present time, product developers should follow guidelines for medicinal products, in order to address product safety at an adequate level. According to the data of the present study, cell and biomaterial products, manipulated cells, and scaffolds appear to be the primary interest for commercial product development. In contrast, producing services were not considered as interesting. Constraints are also imposed by patentability, which stipulates demands for technical performance and highlights ethical issues, which are difficult to address.

Regulation of biogenerics: a survey of viewpoints.

BACKGROUND AND OBJECTIVES: 'Biogenerics' regulation has brought about a heated debate within the EU as the first biopharmaceuticals are going off patent. This study aims to examine the opportunities and challenges offered by biogenerics by surveying the viewpoints of experts in regulatory agencies and in companies developing novel biopharmaceuticals and biogenerics. METHODS: Oral interviews were conducted in 2002 and 2003 with experts including representatives of the European Generic Medicines Association (EGA) and the European Federation of Pharmaceutical Industries and Associations (EFPIA) in Brussels, three innovator biotech companies, and five other experts in Finland. Additionally, four biogenerics companies and one innovator company abroad answered a structured, written questionnaire. RESULTS AND CONCLUSION: According to this study, biogenerics should be regulated on a case-by-case basis. The interviewees were not unanimous as to whether comparability can be addressed and which are the most challenging areas for proving comparability. Immunogenicity was considered to be a major problem for biogenerics. Therefore, a requirement for an intensified monitoring of the safety profile during post-marketing was thought to be justified in many cases.