Hybridization from Guest-Host Interactions Reduces the Thermal Conductivity of Metal-Organic Frameworks.

We experimentally and theoretically investigate the thermal conductivity and mechanical properties of polycrystalline HKUST-1 metal-organic frameworks (MOFs) infiltrated with three guest molecules: tetracyanoquinodimethane (TCNQ), 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4-TCNQ), and (cyclohexane-1,4-diylidene)dimalononitrile (H4-TCNQ). This allows for modification of the interaction strength between the guest and host, presenting an opportunity to study the fundamental atomic scale mechanisms of how guest molecules impact the thermal conductivity of large unit cell porous crystals. The thermal conductivities of the guest@MOF systems decrease significantly, by on average a factor of 4, for all infiltrated samples as compared to the uninfiltrated, pristine HKUST-1. This reduction in thermal conductivity goes in tandem with an increase in density of 38% and corresponding increase in heat capacity of ∼48%, defying conventional effective medium scaling of thermal properties of porous materials. We explore the origin of this reduction by experimentally investigating the guest molecules' effects on the mechanical properties of the MOF and performing atomistic simulations to elucidate the roles of the mass and bonding environments on thermal conductivity. The reduction in thermal conductivity can be ascribed to an increase in vibrational scattering introduced by extrinsic guest-MOF collisions as well as guest molecule-induced modifications to the intrinsic vibrational structure of the MOF in the form of hybridization of low frequency modes that is concomitant with an enhanced population of localized modes. The concentration of localized modes and resulting reduction in thermal conductivity do not seem to be significantly affected by the mass or bonding strength of the guest species.

Maximization of thermal conductance at interfaces via exponentially mass-graded interlayers.

We propose a strategy to potentially best enhance interfacial thermal transport through solid-solid interfaces by adding nano-engineered, exponentially mass-graded intermediate layers. This exponential design rule results in a greater enhancement than a linearly mass-graded interface. By combining calculations using non-equilibrium Green's functions (NEGF) and non-equilibrium molecular dynamics (NEMD), we investigated the role of impedance matching and anharmonicity in the enhancement in addition to geometric parameters such as the number of layers and the junction thickness. Our analysis shows that the effect on thermal conductance is dominated by the phonon thermalization through anharmonic effects, while elastic phonon transmission and impedance matching play a secondary role. In the harmonic limit, increasing the number of layers results in greater elastic phonon transmission at each individual boundary, countered by the decrease of available conducting channels. Consequently, conductance initially increases with number of layers due to improved bridging, but quickly saturates. The presence of slight anharmonic effects (at very low temperature, T = 2 K) turns the saturation into a monotonically increasing trend. Anharmonic effects can further facilitate interfacial thermal transport through the thermalization of phonons at moderate temperatures. At high temperature, however, the role of anharmonicity as a facilitator of interfacial thermal transport reverses. Strong anharmonicity introduces significant intrinsic resistance, overruling the enhancement in thermal conduction at the boundaries. It follows that at a particular temperature, there exists a corresponding junction thickness at which thermal conductance is maximized.

Uncertainty in linewidth quantification of overlapping Raman bands.

Spectral linewidths are used to assess a variety of physical properties, even as spectral overlap makes quantitative extraction difficult owing to uncertainty. Uncertainty, in turn, can be minimized with the choice of appropriate experimental conditions used in spectral collection. In response, we assess the experimental factors dictating uncertainty in the quantification of linewidth from a Raman experiment highlighting the comparative influence of (1) spectral resolution, (2) signal to noise, and (3) relative peak intensity (RPI) of the overlapping peaks. Practically, Raman spectra of SiGe thin films were obtained experimentally and simulated virtually under a variety of conditions. RPI is found to be the most impactful parameter in specifying linewidth followed by the spectral resolution and signal to noise. While developed for Raman experiments, the results are generally applicable to spectroscopic linewidth studies illuminating the experimental trade-offs inherent in quantification.

Remarkably enhanced thermal transport based on a flexible horizontally-aligned carbon nanotube array film.

It has been more than a decade since the thermal conductivity of vertically aligned carbon nanotube (VACNT) arrays was reported possible to exceed that of the best thermal greases or phase change materials by an order of magnitude. Despite tremendous prospects as a thermal interface material (TIM), results were discouraging for practical applications. The primary reason is the large thermal contact resistance between the CNT tips and the heat sink. Here we report a simultaneous sevenfold increase in in-plane thermal conductivity and a fourfold reduction in the thermal contact resistance at the flexible CNT-SiO2 coated heat sink interface by coupling the CNTs with orderly physical overlapping along the horizontal direction through an engineering approach (shear pressing). The removal of empty space rapidly increases the density of transport channels, and the replacement of the fine CNT tips with their cylindrical surface insures intimate contact at CNT-SiO2 interface. Our results suggest horizontally aligned CNT arrays exhibit remarkably enhanced in-plane thermal conductivity and reduced out-of-plane thermal conductivity and thermal contact resistance. This novel structure makes CNT film promising for applications in chip-level heat dissipation. Besides TIM, it also provides for a solution to anisotropic heat spreader which is significant for eliminating hot spots.

General bidirectional thermal characterization via the 3ω technique.

The 3ω technique has become a popular method for determining the thermophysical properties of microscale and bulk materials. The prerequisite fabrication of a highly linear metal line a few hundred nanometers thick on the sample can be a failing point in specific material systems. This difficulty can be overcome by utilizing a bidirectional experimental geometry that employs a contact resistance between the sample and heating wire, which also allows for data collection under varying axial pressure loads. In this work, such a system is demonstrated with an emphasis on developing a thermal mount that will optimize sensitivity to the thermophysical parameters of interest: the sample's thermal conductivity, volumetric heat capacity, and the contact resistance between the sample and mount. A general thermal model is presented that can be simplified to analyze nearly any similar system. This model is then employed to analyze a sample in the mounting scheme described with varying applied pressures to demonstrate the general feasibility of the system.

Single element Raman thermometry.

Despite a larger sensitivity to temperature as compared to other microscale thermometry methods, Raman based measurements typically have greater uncertainty. In response, a new implementation of Raman thermometry is presented having lower uncertainty while also reducing the time and hardware needed to perform the experiment. Using a modulated laser to excite the Raman response, the intensity of only a portion of the total Raman signal is leveraged as the thermometer by using a single element detector monitored with a lock-in amplifier. Implementation of the lock-in amplifier removes many sources of noise that are present in traditional Raman thermometry where the use of cameras preclude a modulated approach. To demonstrate, the portion of the Raman spectrum that is most advantageous for thermometry is first identified by highlighting, via both numerical prediction and experiment, those spectral windows having the largest linear dependence on temperature. Using such windows, the new technique, termed single element Raman thermometry (SERT), is utilized to measure the thermal profile of an operating microelectromechanical systems (MEMS) device and compared to results obtained with a traditional Raman approach. The SERT method is shown to reduce temperature measurement uncertainty by greater than a factor of 2 while enabling 3 times as many data points to be taken in an equal amount of time as compared to traditional Raman thermometry.

Reducing thermal conductivity of binary alloys below the alloy limit via chemical ordering.

Substitutional solid solutions that exist in both ordered and disordered states will exhibit markedly different physical properties depending on their exact crystallographic configuration. Many random substitutional solid solutions (alloys) will display a tendency to order given the appropriate kinetic and thermodynamic conditions. Such order-disorder transitions will result in major crystallographic reconfigurations, where the atomic basis, symmetry, and periodicity of the alloy change dramatically. Consequently, the dominant scattering mechanism in ordered alloys will be different than that in disordered alloys. In this study, we present a hypothesis that ordered alloys can exhibit lower thermal conductivities than their disordered counterparts at elevated temperatures. To validate this hypothesis, we investigate the phononic transport properties of disordered and ordered AB Lennard-Jones alloys via non-equilibrium molecular dynamics and harmonic lattice dynamics calculations. It is shown that the thermal conductivity of an ordered alloy is the same as the thermal conductivity of the disordered alloy at ≈0.6T(melt) and lower than that of the disordered alloy above 0.8T(melt).

Assessment and prediction of thermal transport at solid-self-assembled monolayer junctions.

Self-assembled monolayers (SAMs) have recently garnered much interest due to their unique electrical, chemical, and thermal properties. Several studies have focused on thermal transport across solid-SAM junctions, demonstrating that interface conductance is largely insensitive to changes in SAM length. In the present study, we have investigated the vibrational spectra of alkanedithiol-based SAMs as a function of the number of methylene groups forming the molecular backbone via Hartree-Fock methods. In the case of Au-alkanedithiol junctions, it is found that despite the addition of nine new vibrational modes per added methylene group, only one of these modes falls below the maximum phonon frequency of Au. In addition, the alkanedithiol one-dimensional density of normal modes (modes per unit energy per unit length) is nearly constant regardless of chain length, explaining the observed insensitivity. Furthermore, we developed a diffusive transport model intended to predict interface conductance at solid-SAM junctions. It is shown that this predictive model is in an excellent agreement with prior experimental data available in the literature.

A low-cost, low-power consumption, miniature laser-induced fluorescence system for DNA detection on a microfluidic device.

With a focus on low-cost and low-power consumption, a miniature laser-induced fluorescence (LIF) detection system was assembled using a 635 nm red diode laser as the excitation source and a photodiode element coupled with an operational amplifier for signal collection. The primary elements of the miniature system, namely the laser and the detection system, cost a combined $70 and required only 270 mW of power for operation. When compared to conventional systems assembled using an argon-ion laser source and a photomultiplier tube, this represents a 98% decrease in the cost, and greater than 5000-fold decrease in power consumption. Quantitation of DNA on microdevices using the miniature LIF detection system was also performed with an error of less than 15%. This detection system is a step in the direction of commercializing microfluidic instrumentation by reducing the cost and power required for operation.

Influence of interband transitions on electron-phonon coupling measurements in Ni films.

The reduction in size and the increase in speed of opto- and magnetoelectronic devices is making the probability of nonequilibrium electron-phonon phenomena greater, leading to increased thermal resistance in these devices. The measurement of electron-phonon coupling in materials in these devices is becoming increasingly important for accurate thermal management. Here femtosecond thermoreflectance is used to measure the electron-phonon coupling factor in thin Ni films of varying thickness grown on Si and glass substrates. The thermoreflectance response is measured at 1.3 and 1.55 eV, yielding drastically different responses due to the Fermi-level transition at 1.3 eV in Ni. The influence of this transition on the thermoreflectance response results in a measurement of the electron-phonon coupling factor that is twice as high as that recorded in previous measurements that were unaffected by the Fermi-level transition.

Microchip-based macroporous silica sol-gel monolith for efficient isolation of DNA from clinical samples.

Effective microchip extraction of deoxyribonucleic acid (DNA) from crude biological matrixes has been demonstrated using silica beads or hybrid phases composed of beads and sol-gel. However, the use of monolithic sol-gels alone for extraction of human genomic DNA has been more difficult to define. Here we describe, for the first time, the successful use of monolithic tetramethyl orthosilicate-based sol-gels for effective micro-solid-phase extraction (muSPE) of DNA in a glass microchip format. A functional monolithic silica phase with micrometer-scale pores in the silica matrix resulted from addition of poly(ethylene glycol), a poragen, to the precursor mixture. This allowed a monolithic sol-gel bed to be established in a microchip channel that provided large surface area for DNA extraction with little flow-induced back pressure. DNA extraction efficiencies for simple systems (lambda-phage DNA) were approximately 85%, while efficiencies for the reproducible extraction of human genomic DNA from complex biological matrixes (human blood) were approximately 70%. Blockage of the sol-gel pores by components in the lysed blood was observed in repeat extraction on a single device as a decrease in the extraction efficiency. The developed muSPE protocol was further evaluated to show applicability to clinical samples and bacterial cultures, through extraction of PCR-amplifiable DNA.

A novel method for measuring dynamic changes in cell volume.

Many cell types regulate their volume in response to extracellular tonicity changes through a complex series of adaptive mechanisms. Several methods that are presently used to measure cell volume changes include Coulter counters, fluorescent techniques, electronic impedance, and video microscopy. Although these methods are widely used and accepted, there are limitations associated with each technique. This paper describes a new method to measure changes in cell volume based on the principle that fluid flow within a rigid system is well determined. For this study, cos-7 cells were plated to line the inner lumen of a glass capillary and stimulated to swell or shrink by altering the osmolarity of the perfusing solution. The cell capillary was connected in series with a blank reference capillary, and differential pressure changes across each tube were monitored. The advantages of this method include 1) ability to continuously monitor changes in volume during rapid solution changes, 2) independence from cell morphology, 3) presence of physiological conditions with cell surface contacts and cell-cell interactions, 4) no phototoxic effects such as those associated with fluorescent methods, and 5) ability to report from large populations of cells. With this method, we could detect the previously demonstrated enhanced volume regulation of cells overexpressing the membrane phosphoprotein phospholemman, which has been implicated in osmolyte transport.

Towards a microchip-based chromatographic platform. Part 2: sol-gel phases modified with polyelectrolyte multilayers for capillary electrochromatography.

The potential for using polyelectrolyte multilayers (PEMs) to provide chromatographic functionality on continuous silica networks created from sol-gel chemistry has been evaluated by capillary electrochromatography (CEC). Construction of the PEM was achieved by flushing the column with polyelectrolytes of alternative charge, with variation of the properties of the exposed polyelectrolyte providing a unique means to vary the chromatographic surface. Variation of the exposed polyelectrolyte from poly(diallyldimethylammonium chloride) (PDDAC) to dextran sulfate (DS) allowed the direction of the electroosmotic flow (EOF) to be changed and also provided a means to vary the chromatographic capacity. Variation of negative polymer from DS to poly(styrene sulfonate) (PSS) significantly altered the EOF and the migration of peptides, with both the reversed-phase and ion-exchange capacities increasing. An alternative method for changing the column capacity was to change the thickness of the PEM, which was evaluated by anion-exchange CEC. A 70-80% increase in retention was observed for all anions without any increase in EOF suggesting significant penetration of the analytes through the PEM and interaction with buried charges within the PEM.

Microchip-based purification of DNA from biological samples.

A microchip solid-phase extraction method for purification of DNA from biological samples, such as blood, is demonstrated. Silica beads were packed into glass microchips and the beads immobilized with sol-gel to provide a stable and reproducible solid phase onto which DNA could be adsorbed. Optimization of the DNA loading conditions established a higher DNA recovery at pH 6.1 than 7.6. This lower pH also allowed for the flow rate to be increased, resulting in a decrease in extraction time from 25 min to less than 15 min. Using this procedure, template genomic DNA from human whole blood was purified on the microchip platform with the only sample preparation being mixing of the blood with load buffer prior to loading on the microchip device. Comparison between the microchip SPE (microchipSPE) procedure and a commercial microcentrifuge method showed comparable amounts of PCR-amplifiable DNA could be isolated from cultures of Salmonella typhimurium. The greatest potential of the microchipSPE device was illustrated by purifying DNA from spores from the vaccine strain of Bacillus anthracis, where eventual integration of SPE, PCR, and separation on a single microdevice could potentially enable complete detection of the infectious agent in less than 30 min.

Towards a microchip-based chromatographic platform. Part 1: Evaluation of sol-gel phases for capillary electrochromatography.

Silica monolithic columns suitable for implementation on microchips have been evaluated by ion-exchange capillary electrochromatography. Two different silica monoliths were created from the alkyl silane, tetramethyl orthosilicate (TMOS), by introducing a water-soluble organic polymer, poly(ethylene oxide) (PEO), with varying molecular weights into the prehydrolyzed sol. Silica monoliths created using 10 kDa PEO were found to have a much more closed gel structure with a smaller percentage of pores in the microm size range than gels created using 100 kDa PEO. Additionally, the size of the mesopores in the 100 kDa PEO monolith was 5 nm, while those in the 10 kDa PEO gel were only 3 nm. This resulted in a strong dependence of the electroosmotic flow (EOF) on the ionic strength of the background electrolyte, with substantial pore flow through the nm size pores observed in the 10 kDa PEO gel. The chromatographic performance of the monolithic columns was evaluated by ion-exchange electrochromatography, with ion-exchange sites introduced via dynamic coating with the cationic polymer, poly(diallyldimethylammonium chloride) (PDDAC). Separating a mixture of inorganic anions, the 10 kDa PEO monolithic columns showed a higher effective capacity than the 100 kDa PEO column.

Toward a microchip-based solid-phase extraction method for isolation of nucleic acids.

A silica-based solid-phase extraction system suitable for incorporation into a microchip platform (nu-total analytical system; nu-TAS) would find utility in a variety of genetic analysis protocols, including DNA sequencing. The extraction procedure utilized is based on adsorption of the DNA onto bare silica. The procedure involves three steps: (i) DNA adsorption in the presence of a chaotropic salt, (ii) removal of contaminants with an alcohol/water solution, and (iii) elution of the adsorbed DNA in a small volume of buffer suitable for polymerase chain reaction (PCR) amplification. Multiple approaches for incorporation of this protocol into a microchip were examined with regard to extraction efficiency, reproducibility, stability, and the potential to provide PCR-amplifiable DNA. These included packing microchannels with silica beads only, generating a continuous silica network via sol-gel chemistry, and combinations of these. The optimal approach was found to involve immobilizing silica beads packed into the channel using a sol-gel network. This method allowed for successful extraction and elution of nanogram quantities of DNA in less than 25 min, with the DNA obtained in the elution buffer fraction. Evaluation of the eluted DNA indicated that it was of suitable quality for subsequent amplification by PCR.