Theoretical Calculations Facilitating Catalysis for Advanced Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries have emerged as one of the most hopeful alternatives for energy storage systems. However, the commercialization of Li-S batteries is still confronted with enormous hurdles. The poor conductivity of sulfur cathodes induces sluggish redox kinetics. The shuttling of polysulfides incurs the heavy failure of electroactive substances. Tremendous efforts in experiments to seek efficient catalysts have achieved significant success. Unfortunately, the understanding of the underlying catalytic mechanisms is not very detailed due to the complicated multistep conversion reactions in Li-S batteries. In this review, we aim to give valuable insights into the connection between the catalyst activities and the structures based on theoretical calculations, which will lead the catalyst design towards high-performance Li-S batteries. This review first introduces the current advances and issues of Li-S batteries. Then we discuss the electronic structure calculations of catalysts. Besides, the relevant calculations of binding energies and Gibbs free energies are presented. Moreover, we discuss lithium-ion diffusion energy barriers and Li2S decomposition energy barriers. Finally, a Conclusions and Outlook section is provided in this review. It is found that calculations facilitate the understanding of the catalytic conversion mechanisms of sulfur species, accelerating the development of advanced catalysts for Li-S batteries.

Review of the Scalable Core-Shell Synthesis Methods: The Improvements of Li-Ion Battery Electrochemistry and Cycling Stability.

The demand for lithium-ion batteries has significantly increased due to the increasing adoption of electric vehicles (EVs). However, these batteries have a limited lifespan, which needs to be improved for the long-term use needs of EVs expected to be in service for 20 years or more. In addition, the capacity of lithium-ion batteries is often insufficient for long-range travel, posing challenges for EV drivers. One approach that has gained attention is using core-shell structured cathode and anode materials. That approach can provide several benefits, such as extending the battery lifespan and improving capacity performance. This paper reviews various challenges and solutions by the core-shell strategy adopted for both cathodes and anodes. The highlight is scalable synthesis techniques, including solid phase reactions like the mechanofusion process, ball-milling, and spray-drying process, which are essential for pilot plant production. Due to continuous operation with a high production rate, compatibility with inexpensive precursors, energy and cost savings, and an environmentally friendly approach that can be carried out at atmospheric pressure and ambient temperatures. Future developments in this field may focus on optimizing core-shell materials and synthesis techniques for improved Li-ion battery performance and stability.

Influence of the SEI Formation on the Stability and Lithium Diffusion in Si Electrodes.

Silicon (Si) is an attractive anode material for Li-ion batteries (LIBs) due to its high theoretical specific capacity. However, the solid-electrolyte interphase (SEI) formation, caused by liquid electrolyte decomposition, often befalls Si electrodes. The SEI layer is less Li-ion conductive, which would significantly inhibit Li-ion transport and delay the reaction kinetics. Understanding the interaction between the SEI components and Li-ion diffusion is crucial for further improving the cycling performance of Si. Herein, different liquid electrolytes are applied to investigate the induced SEI components, structures, and their role in Li-ion transport. It is found that Si electrodes exhibit higher discharge capacities in LiClO4-based electrolytes than in LiPF6-based electrolytes. This behavior suggests that a denser and more conductive SEI layer is formed in LiClO4-based electrolytes. In addition, a coating of a Li3PO4 artificial SEI layer on Si suppresses the formation of natural SEI formation, leading to higher capacity retentions. Furthermore, galvanostatic intermittent titration technique (GITT) measurements are applied to calculate Li-ion diffusion coefficients, which are found in the range of 10-23-10-19 m2/s.

3D Printed Lithium-Metal Full Batteries Based on a High-Performance Three-Dimensional Anode Current Collector.

A three-dimensional (3D) printing method has been developed for preparing a lithium anode base on 3D-structured copper mesh current collectors. Through in situ observations and computer simulations, the deposition behavior and mechanism of lithium ions in the 3D copper mesh current collector are clarified. Benefiting from the characteristics that the large pores can transport electrolyte and provide space for dendrite growth, and the small holes guide the deposition of dendrites, the 3D Cu mesh anode exhibits excellent deposition and stripping capability (50 mAh cm-2), high-rate capability (50 mA cm-2), and a long-term stable cycle (1000 h). A full lithium battery with a LiFePO4 cathode based on this anode exhibits a good cycle life. Moreover, a 3D fully printed lithium-sulfur battery with a 3D printed high-load sulfur cathode can easily charge mobile phones and light up 51 LED indicators, which indicates the great potential for the practicability of lithium-metal batteries with the characteristic of high energy densities. Most importantly, this unique and simple strategy is also able to solve the dendrite problem of other secondary metal batteries. Furthermore, this method has great potential in the continuous mass production of electrodes.

Impact of dual-layer solid-electrolyte interphase inhomogeneities on early-stage defect formation in Si electrodes.

While intensive efforts have been devoted to studying the nature of the solid-electrolyte interphase (SEI), little attention has been paid to understanding its role in the mechanical failures of electrodes. Here we unveil the impact of SEI inhomogeneities on early-stage defect formation in Si electrodes. Buried under the SEI, these early-stage defects are inaccessible by most surface-probing techniques. With operando full field diffraction X-ray microscopy, we observe the formation of these defects in real time and connect their origin to a heterogeneous degree of lithiation. This heterogeneous lithiation is further correlated to inhomogeneities in topography and lithium-ion mobility in both the inner- and outer-SEI, thanks to a combination of operando atomic force microscopy, electrochemical strain microscopy and sputter-etched X-ray photoelectron spectroscopy. Our multi-modal study bridges observations across the multi-level interfaces (Si/LixSi/inner-SEI/outer-SEI), thus offering novel insights into the impact of SEI homogeneities on the structural stability of Si-based lithium-ion batteries.

K2 Ti2 O5 @C Microspheres with Enhanced K+ Intercalation Pseudocapacitance Ensuring Fast Potassium Storage and Long-Term Cycling Stability.

Benefiting from the natural abundance and low standard redox potential of potassium, potassium-ion batteries (PIBs) are regarded as one of the most promising alternatives to lithium-ion batteries for low-cost energy storage. However, most PIB electrode materials suffer from sluggish thermodynamic kinetics and dramatic volume expansion during K+ (de)intercalation. Herein, it is reported on carbon-coated K2 Ti2 O5 microspheres (S-KTO@C) synthesized through a facile spray drying method. Taking advantage of both the porous microstructure and carbon coating, S-KTO@C shows excellent rate capability and cycling stability as an anode material for PIBs. Furthermore, the intimate integration of carbon coating through chemical vapor deposition technology significantly enhances the K+ intercalation pseudocapacitive behavior. As a proof of concept, a potassium-ion hybrid capacitor is constructed with the S-KTO@C (battery-type anode material) and the activated carbon (capacitor-type cathode material). The assembled device shows a high energy density, high power density, and excellent capacity retention. This work can pave the way for the development of high-performance potassium-based energy storage devices.

Dendrite-Free Sodium-Metal Anodes for High-Energy Sodium-Metal Batteries.

Sodium (Na) metal is one of the most promising electrode materials for next-generation low-cost rechargeable batteries. However, the challenges caused by dendrite growth on Na metal anodes restrict practical applications of rechargeable Na metal batteries. Herein, a nitrogen and sulfur co-doped carbon nanotube (NSCNT) paper is used as the interlayer to control Na nucleation behavior and suppress the Na dendrite growth. The N- and S-containing functional groups on the carbon nanotubes induce the NSCNTs to be highly "sodiophilic," which can guide the initial Na nucleation and direct Na to distribute uniformly on the NSCNT paper. As a result, the Na-metal-based anode (Na/NSCNT anode) exhibits a dendrite-free morphology during repeated Na plating and striping and excellent cycling stability. As a proof of concept, it is also demonstrated that the electrochemical performance of sodium-oxygen (Na-O2 ) batteries using the Na/NSCNT anodes show significantly improved cycling performances compared with Na-O2 batteries with bare Na metal anodes. This work opens a new avenue for the development of next-generation high-energy-density sodium-metal batteries.

Wet-Chemical Synthesis of 3D Stacked Thin Film Metal-Oxides for All-Solid-State Li-Ion Batteries.

By ultrasonic spray deposition of precursors, conformal deposition on 3D surfaces of tungsten oxide (WO3) negative electrode and amorphous lithium lanthanum titanium oxide (LLT) solid-electrolyte has been achieved as well as an all-solid-state half-cell. Electrochemical activity was achieved of the WO3 layers, annealed at temperatures of 500 °C. Galvanostatic measurements show a volumetric capacity (415 mAh·cm-3) of the deposited electrode material. In addition, electrochemical activity was shown for half-cells, created by coating WO3 with LLT as the solid-state electrolyte. The electron blocking properties of the LLT solid-electrolyte was shown by ferrocene reduction. 3D depositions were done on various micro-sized Si template structures, showing fully covering coatings of both WO3 and LLT. Finally, the thermal budget required for WO3 layer deposition was minimized, which enabled attaining active WO3 on 3D TiN/Si micro-cylinders. A 2.6-fold capacity increase for the 3D-structured WO3 was shown, with the same current density per coated area.

A Short Review on Photocatalytic Degradation of Formaldehyde.

Nowadays, it is a great challenge to eliminate toxic and harmful organic pollutants from air and water. This paper reviews the role of TiO2 as a photocatalyst, light source and photoreactor in the particular case of removal of formaldehyde using the photocatalytic reaction by titanium dioxide (TiO2) in aqueous and gaseous systems. The reaction mechanisms of the photocatalytic oxidation of gaseous formaldehyde are given. We also present a detailed review of published articles on photocatalytic degradation of formaldehyde by modified titanium dioxide doped with foreign species such as metal and non-metal components. We point out the most prospective developments of the photocatalyst compositions for the future potential commercial applications.

Efficient water reduction with gallium phosphide nanowires.

Photoelectrochemical hydrogen production from solar energy and water offers a clean and sustainable fuel option for the future. Planar III/V material systems have shown the highest efficiencies, but are expensive. By moving to the nanowire regime the demand on material quantity is reduced, and new materials can be uncovered, such as wurtzite gallium phosphide, featuring a direct bandgap. This is one of the few materials combining large solar light absorption and (close to) ideal band-edge positions for full water splitting. Here we report the photoelectrochemical reduction of water, on a p-type wurtzite gallium phosphide nanowire photocathode. By modifying geometry to reduce electrical resistance and enhance optical absorption, and modifying the surface with a multistep platinum deposition, high current densities and open circuit potentials were achieved. Our results demonstrate the capabilities of this material, even when used in such low quantities, as in nanowires.

Photoelectrochemical hydrogen production on InP nanowire arrays with molybdenum sulfide electrocatalysts.

Semiconductor nanowire arrays are expected to be advantageous for photoelectrochemical energy conversion due to their reduced materials consumption. In addition, with the nanowire geometry the length scales for light absorption and carrier separation are decoupled, which should suppress bulk recombination. Here, we use vertically aligned p-type InP nanowire arrays, coated with noble-metal-free MoS3 nanoparticles, as the cathode for photoelectrochemical hydrogen production from water. We demonstrate a photocathode efficiency of 6.4% under Air Mass 1.5G illumination with only 3% of the surface area covered by nanowires.

Screening and separation of charges in microscale devices: complete planar solution of the Poisson-Boltzmann equation.

The Poisson-Boltzmann (PB) equation is widely used to calculate the interaction between electric potential and the distribution of charged species. In the case of a symmetrical electrolyte in planar geometry, the Gouy-Chapman (GC) solution is generally presented as the analytical solution of the PB equation. However, we demonstrate here that this GC solution assumes the presence of a bulk region with zero electric field, which is not justified in microdevices. In order to extend the range of validity, we obtain here the complete numerical solution of the planar PB equation, supported with analytical approximations. For low applied voltages, it agrees with the GC solution. Here, the electric double layers fully absorb the applied voltage such that a region appears where the electric field is screened. For higher voltages (of order 1 V in microdevices), the solution of the PB equation shows a dramatically different behavior, in that the double layers can no longer absorb the complete applied voltage. Instead, a finite field remains throughout the device that leads to complete separation of the charged species. In this higher voltage regime, the double layer characteristics are no longer described by the usual Debye parameter kappa, and the ion concentration at the electrodes is intrinsically bound (even without assuming steric interactions). In addition, we have performed measurements of the electrode polarization current on a nonaqueous model electrolyte inside a microdevice. The experimental results are fully consistent with our calculations, for the complete concentration and voltage range of interest.

Equilibrium kinetics of chemisorption processes.

A new approach to describe the equilibrium kinetics of chemisorption is proposed. The description of the system is based on first-principles chemical reaction kinetics and statistical thermodynamics. The rate constants are described by using a novel way of activation energy characterization. General expressions for equilibrium gas pressure isotherms and forward/backward reaction rates are obtained as a function of surface coverage. A strong influence of attraction and repulsion interaction energies between the adsorbed species on the equilibrium kinetics is found.

Ternary MgTiX-alloys: a promising route towards low-temperature, high-capacity, hydrogen-storage materials.

In the search for hydrogen-storage materials with a high gravimetric capacity, Mg(y)Ti((1-y)) alloys, which exhibit excellent kinetic properties, form the basis for more advanced compounds. The plateau pressure of the Mg--Ti--H system is very low (approximately 10(-6) bar at room temperature). A way to increase this pressure is by destabilizing the metal hydride. The foremost effect of incorporating an additional element in the binary Mg--Ti system is, therefore, to decrease the stability of the metal hydride. A model to calculate the effect on the thermodynamic stability of alloying metals was developed by Miedema and co-workers. Adopting this model offers the possibility to select promising elements beforehand. Thin films consisting of Mg and Ti with Al or Si were prepared by means of e-beam deposition. The electrochemical galvanostatic intermittent titration technique was used to obtain pressure-composition isotherms for these ternary materials and these isotherms reveal a reversible hydrogen-storage capacity of more than 6 wt. %. In line with the calculations, substitution of Mg and Ti by Al or Si indeed shifts the plateau pressure of a significant part of the isotherms to higher pressures, while remaining at room temperature. It has been proven that, by controlling the chemistry of the metal alloy, the thermodynamic properties of Mg-based hydrides can be regulated over a wide range. Hence, the possibility to increase the partial hydrogen pressure, while maintaining a high gravimetric capacity creates promising opportunities in the field of hydrogen-storage materials, which are essential for the future of the hydrogen economy.

The impact of the layer thickness on the thermodynamic properties of pd hydride thin film electrodes.

Recently, a lattice gas model was presented and successfully applied to simulate the absorption/desorption isotherms of various hydride-forming materials. The simulation results are expressed by parameters corresponding to several energy contributions, e.g., interaction energies. However, the use of a model system is indispensable in order to show the strength of the simulations. The palladium-hydrogen system is one of the most thoroughly described metal hydrides found in the literature and is therefore ideal for this purpose. The effects of decreasing the thickness of Pd thin films on the isotherms have been monitored experimentally and subsequently simulated. An excellent fit of the lattice gas model to the experimental data is found, and the corresponding parameters are used to describe several thermodynamic properties. It is analyzed that the contribution of H-H interaction energies to the total energy and the influence of the host lattice energy are significantly and systematically changing as a function of Pd thickness. Conclusively, it has been verified that the lattice gas model is a useful tool to analyze thermodynamic properties of hydrogen storage materials.

A novel method for the in situ determination of concentration gradients in the electrolyte of Li-ion batteries.

An electrochemical method has been developed for the in situ determination of concentration gradients in the electrolyte of sealed Li-ion batteries by measuring the potential difference between microreference electrodes. Formulas relating the concentration gradient and the potential difference between the microreference electrodes were derived from the Nernst-Planck equation. The concentration gradients in Li-ion batteries are theoretically and experimentally proven to be linear at steady state under galvanostatic charging and discharging conditions. Based on this finding, both the diffusion coefficient of the lithium ions in the electrolyte and the diffusion overpotential related to the concentration gradient have been calculated. It was found that the concentration gradient is proportional to the applied current over a wide current range and that the obtained diffusion coefficient of lithium ions is almost constant. For the batteries studied in this work, the diffusion overpotential is already noticeable at 0.30 A and the limiting current is estimated to be 1.1 A, corresponding to a C-rate of 3.7.