Combined conversion of lignocellulosic biomass into high-value products with ultrasonic cavitation and photocatalytic produced reactive oxygen species - A review.

The production of high-value products from lignocellulosic biomass is carried out through the selective scission of crosslinked CC/CO bonds. Nowadays, several techniques are applied to optimize biomass conversion into desired products with high yields. Photocatalytic technology has been proven to be a valuable tool for valorizing biomass at mild conditions. The photoproduced reactive oxygen species (ROSs) can initiate the scission of crosslinked bonds and form radical intermediates. However, the low mass transfer of the photocatalytic process could limit the production of a high yield of products. The incorporation of ultrasonic cavitation in the photocatalytic system provides an exceptional condition to boost the fragmentation and transformation of biomass into the desired products within a lesser reaction time. This review critically discusses the main factors governing the application of photocatalysis for biomass valorization and tricks to boost the selectivity for enhancing the yield of desired products. Synergistic effects obtained through the combination of sonolysis and photocatalysis were discussed in depth. Under ultrasonic vibration, hot spots could be produced on the surface of the photocatalysts, improving the mass transfer through the jet phenomenon. In addition, shock waves can assist the dissolution and mixing of biomass particles.

Easy-handling semi-floating TiO2-based aerogel for solar photocatalytic water depollution.

One of the capital issues of photocatalytic technology is how to use photocatalytic materials in real world conditions. Suspension photocatalysts are the most effective, while the handling and recovery of nanoparticles are very challenging and costly. Herein, we report the design of semi-floating aerogel TiO2-based photocatalyst for the oxidation of dyes and photoreduction of Cr(VI). TiO2 aerogel-based photocatalyst was fabricated through in situ polymerization using borax, poly(vinyl alcohol) and polyvinylidene in the presence of H2O2 as a catalyst. Cubic TiO2 aerogel of few centimetres was designed for the photocatalytic tests under solar light irradiation. TiO2 aerogel showed a good photoactivity against the oxidation of three types of dyes and Cr(VI) photoreduction. In terms of dyes, the kinetics of methylene blue oxidation was the fastest as compared to rhodamine B and methyl red, while, a total reduction of Cr(VI) at 10 ppm was obtained within 30 min after the addition of tartaric acid as hole scavenger. TiO2 aerogel can be easily recovered, washed and recycled. TiO2 aerogel can move freely from the top to the deep solution. The semi-floating property could be an advantage to enhance the mass transfer along with bulk solution, as compared to totally floating-based photocatalysts.

Sorption of polluting metal ions on a palm tree frond sawdust studied by the means of modified carbon paste electrodes.

Water remediation by adsorption of the metal ions on a low cost sorbent is the frame of the present study. The metal ions adsorption properties of sawdust of palm tree fronds (PTF sawdust) are investigated by both equilibrium measurements and modified carbon paste electrode. The ability to adsorb Cu(II), Cr(VI) and As(III) in significant quantities is demonstrated. Carbon paste electrodes modified by incorporation of PTF sawdust (PTF-CPE) or, for comparison, an organically modified silica for the detection of copper(II) are investigated in term of sensitivity, estimation of number of possible reuses, repeatability and interference effect. A detection limit for Cu(II) analysis of 1.0×10(-8) M has been achieved after 5 min preconcentration and a single PTF-CPE can be used for up to 10 preconcentration-analysis-regeneration cycles. The relative standard deviation (n=9) for the determination of a 10(-6) M Cu(II) solution (pH=5) was about 26%. The effects of Ca(II), As(III) and Cr(VI) on the copper detection are investigated: calcium ions were shown to compete with copper on the same adsorption sites, arsenic(III) has no effect on the copper detection whereas chromium(VI) was shown to enhance the copper detection.