A novel integration of regret-based methodology and bankruptcy theory for waste load allocation.

Developing a suitable index for Waste Load Allocation (WLA) is essential for both industrial polluters and environmental organizations. Identifying the index that best describes the quality conditions of the river is the main concern of this study. To achieve this purpose, a novel framework incorporating a regret-based index and a bankruptcy-based approach to address the impacts of low water quality and pollutant locations within the WLA are introduced. The framework includes a simulation-optimization model to minimize river quality regret for environmental organizations and total treatment cost for industrial polluters, employing Nash bargaining theory for conflict resolution. Additionally, a new bankruptcy approach, the Namin's rule, is proposed for redistributing the River Quality Regret Index among industrial polluters. Applying this methodology to data from the KhoramAbad River, a sensitivity analysis reveals that while there is no significant difference between the methodology and fuzzy risk when polluters are close, the methodology provides more accurate results as the distance between polluters increases. When the distance between two pollutants was 20 km, the sum of WLA was evaluated to be 300 kg per day higher than that in the compared method, potentially enhancing environmental justice.

Fatigue behaviour of load-bearing polymeric bone scaffolds: A review.

Bone scaffolds play a crucial role in bone tissue engineering by providing mechanical support for the growth of new tissue while enduring static and fatigue loads. Although polymers possess favourable characteristics such as adjustable degradation rate, tissue-compatible stiffness, ease of fabrication, and low toxicity, their relatively low mechanical strength has limited their use in load-bearing applications. While numerous studies have focused on assessing the static strength of polymeric scaffolds, little research has been conducted on their fatigue properties. The current review presents a comprehensive study on the fatigue behaviour of polymeric bone scaffolds. The fatigue failure in polymeric scaffolds is discussed and the impact of material properties, topological features, loading conditions, and environmental factors are also examined. The present review also provides insight into the fatigue damage evolution within polymeric scaffolds, drawing comparisons to the behaviour observed in natural bone. Additionally, the effect of polymer microstructure, incorporating reinforcing materials, the introduction of topological features, and hydrodynamic/corrosive impact of body fluids in the fatigue life of scaffolds are discussed. Understanding these parameters is crucial for enhancing the fatigue resistance of polymeric scaffolds and holds promise for expanding their application in clinical settings as structural biomaterials. STATEMENT OF SIGNIFICANCE: Polymers have promising advantages for bone tissue engineering, including adjustable degradation rates, compatibility with native bone stiffness, ease of fabrication, and low toxicity. However, their limited mechanical strength has hindered their use in load-bearing scaffolds for clinical applications. While prior studies have addressed static behaviour of polymeric scaffolds, a comprehensive review of their fatigue performance is lacking. This review explores this gap, addressing fatigue characteristics, failure mechanisms, and the influence of parameters like material properties, topological features, loading conditions, and environmental factors. It also examines microstructure, reinforcement materials, pore architectures, body fluids, and tissue ingrowth effects on fatigue behaviour. A significant emphasis is placed on understanding fatigue damage progression in polymeric scaffolds, comparing it to natural bone behaviour.

A new fuzzy approach and bankruptcy theory in risk estimation in Waste Load Allocation.

In this paper, we developed a simulator-optimizer model based on risk analysis to determine Waste Load Allocation (WLA). A new Fuzzy index as Fuzzy Risk Index (FRI) was linked with multi-objective optimization to minimize FRI for the environmental stakeholder and the total cost of sewage treatment for the polluting industries as the other collective stakeholder. Afterwards, the conflict was resolved with the help of Nash bargaining and bankruptcy approach (Constrained Equal Awards Rule). The model was run using quantitative/qualitative data for the KhoramAbad River. To check the efficiency of FRI, the process followed for WLA was reimplemented by the Monte Carlo simulation (MCS). A comparison between the two approaches revealed that the outcomes derived from Fuzzy arithmetic across all aspects, encompassing river qualitative simulation, nondominated curve, Nash bargaining's agreed point, and bankruptcy output, closely mirrored the results of MCS. The notable distinction lies in the drastic reduction of the model's execution time by a factor of 450.

Computational modeling of nickel-titanium orthopedic staples in the treatment of a fractured scaphoid: Effects of staple bridge configuration.

Internal fixation devices made of nickel-titanium (NiTi) staples have the advantage of producing compressive stress at the fracture site due to their unique shape memory effect and superelasticity. In the present study, a comparison was made between two commercial NiTi staples of the same size but with different bridge configurations, used for scaphoid fracture fixation. The staple and scaphoid anatomical configurations were modeled using SolidWorks, while ABAQUS software was used to analyze the stress and displacement caused by staples and distributed in the scaphoid waist. In the staple with a straight bridge, the regions under the tips of the staple legs underwent the largest stress, whereas there was negligible stress in the regions closer to the staple bridge. In the staple with an S-shaped bridge, the stress concentration was highly localized in the region close to the staple bridge, with a maximum stress that was over eight times higher than in the staple with a straight bridge. Considering the amount and distribution of stress in both staples, neither of the staples was able to create the ideal healing condition on the fracture surface.

Sustainable synthesis of graphene sand composite from waste cooking oil for dye removal.

Waste cooking oil (WCO) appears to be a potential carbonaceous source for synthesizing graphene sand composite (GSC) adsorbent in removing pollutants. This study presents a green synthesis method of GSC using WCO as a sustainable carbon source for the synthesis of GSC through the thermal graphitization method. Characterization analysis conducted on GSCWCO verified the successful coating of WCO onto the sand surface and conversion to graphene, which possessed distinct functional groups and features of graphene materials. GSCWCO adsorbent effectiveness in removing Congo Red dye through batch adsorption was studied under the influence of different initial concentrations (20 to 100 mg/L), and the optimum pH (pH 2 to 10), contact time (5 to 240 min), and temperature (25 to 45 °C) were investigated. The GSCWCO showed removal rates of 91.5% achieved at an initial dye concentration of 20 mg L-1, 1.0 g of adsorbent dosage, a temperature of 25 °C, and 150 min of contact time. The GSCWCO exhibited a maximum capacity of 5.52 mg g-1, was well-fitted to the Freundlich isotherm model with an R2 value of 0.989 and had an adsorption mechanism that followed the pseudo-second-order kinetic model. Negative values of enthalpy (ΔH) and Gibbs free energy (ΔG) revealed that CR adsorption onto GSCWCO was a spontaneous and exothermic process. The presence of functional groups on the surface of GSCWCO with such interactions (π-π attractive forces, hydrophobic forces, and hydrogen bonding) was responsible for the anionic dye removal. Regeneration of GSCWCO adsorbent declined after four cycles, possibly due to the chemisorption of dyes with GSC that resulted in inefficient adsorption. Being a waste-to-wealth product, GSCWCO possessed great potential to be used for water treatment and simultaneously benefited the environment through the effort to reduce the excessive discharge of WCO.

Decoration of polylactic acid on graphene oxide for efficient adsorption of methylene blue and tetracycline.

Decorating nanomaterials on graphene oxide (GO) can enhance its adsorption capacity and removal efficiency of water pollutants. In this study, for the first time, nano-sized polylactic acid (PLA) has been successfully decorated on the surface of GO through a facile synthesis approach. The adsorptive efficiency of GO-PLA for removing methylene blue (MB) and tetracycline (TC) from an aqueous solution was examined. The characterization confirmed the successful decoration of PLA on GO nanosheets with the nano size of PLA. It was hypothesized that the PLA was decorated on the surface of GO through covalent bonding between oxygen-containing functional groups and lactide molecules. The optimum adsorption parameters determined were at the adsorbent dose of 0.5 g L-1, pH 4, contact time of 120 min, and temperature of 318 K. The pseudo-second-order kinetic model described the contaminants' adsorption behaviour, and the intraparticle diffusion model revealed that both surface adsorption and intraparticle diffusion controlled the adsorption process. Langmuir isotherm model best described the adsorption behaviour of the pollutants on GO-PLA and demonstrated the maximum monolayer uptake capacities of MB (332.5 mg g-1) and TC (223.7 mg g-1). The adsorption results indicated that the uptake capacities of GO-PLA in comparison to GO have increased by approximately 70% and 110% for MB and TC, respectively. These observations reflect the remarkable role of nano-sized PLA that enhanced the adsorption capacity due to its additional functional group and larger surface area.

Sugar molasses as a sustainable precursor for the synthesis of graphene sand composite adsorbent for tetracycline and methylene blue removal.

Sugar molasses from agricultural waste could be a sustainable carbon source for the synthesis of graphene adsorbent introduced in this work. The sugar molasses was successfully converted to graphene-like material and subsequently coated on the sand as graphene sand composite (GSC), as proven by XRD, XPS, Raman spectroscopy, and SEM with EDX mapping analyses. The adsorption performance of GSC was evaluated against the removal of Tetracycline (TC) and methylene blue (MB) pollutants from an aqueous solution in a fixed bed column continuous-flow adsorption setup. The effect of different process conditions: bed height (4-12 cm), influent flow rate (3-7 mL/min), and contaminants' concentration (50-150 ppm) was investigated. The results revealed that column performance was improved by increasing the bed depth and lowering the flow rate and concentration of the pollutants. The best removal efficiency was obtained when the bed height was 12 cm, the influent flow rate of 3 mL/min, and the pollutants' initial concentration was 50 mg/L. Thomas, Adams-Bohart, and Yoon-Nelson models were attempted to fit the breakthrough curves. Regeneration of the GSC indicated the decline of breakthrough time from 240-280 to 180 min, reflecting the decrease in adsorptive sites due to the incomplete regeneration process. Overall, sugar molasses was shown to be a low-cost precursor for synthesizing valuable graphene material in the form of GSC, which can reduce the problem for industrial waste management of sugar molasses, and the GSC could be used as an adsorbent for environmental application.

Multimodal effects of asymmetric coating of coronary stents by electrospinning and electrophoretic deposition.

Drug-eluting stents (DESs) are drug-coated vascular implants that inhibit smooth muscle cell proliferation and limit in-stent re-stenosis. However, traditional DESs release a single drug into the blood and cannot cope with complex mechanisms in atherosclerosis and body responses. The present study aimed to develop a novel multimodal stent by fabricating asymmetric coating with electrophoretic deposition and electrospinning. Herein, we use heparin-loaded alginate (Hep/Alg) and atorvastatin calcium-loaded polyurethane (AtvCa/PU) coatings on the stent luminal and abluminal surfaces, respectively. Scanning electron microscopy (SEM) micrographs showed that the alginate coatings had uniformity and thin thickness. Meanwhile, the PU fibers were formed without beads, with an acceptable diameter and suitable mechanical properties. PU nanofiber revealed minimal degradation in a 1-month study. The release of AtvCa and Hep continued for 8 days without a significant initial burst release. None of the stent coatings were cytotoxic or hemolytic, and PU nanofibers supported the survival of human umbilical endothelial cells (HUVEC) with high adhesion and flattened morphologies. The results indicate that electrophoretic deposition and electrospinning have significant potential for achieving asymmetric coating on stents and a promising approach for dual drug release for multimodal effects in vascular stent applications.

Surface Heparinization of a Magnesium-Based Alloy: A Comparison Study of Aminopropyltriethoxysilane (APTES) and Polyamidoamine (PAMAM) Dendrimers.

Magnesium (Mg)-based alloys are biodegradable metallic biomaterials that show promise in minimizing the risks of permanent metallic implants. However, their clinical applications are restricted due to their rapid in vivo degradation and low surface hemocompatibilities. Surface modifications are critically important for controlling the corrosion rates of Mg-based alloys and improving their hemocompatibilities. In the present study, two heparinization methods were developed to simultaneously increase the corrosion resistance and hemocompatibility of the AZ31 Mg alloy. In the first method, the surface of the AZ31 alloy was modified by alkali-heat treatment and then aminolyzed by 3-amino propyltriethoxy silane (APTES), a self-assembly molecule, and heparin was grafted onto the aminolyzed surface. In the second method, before heparinization, polyamidoamine dendrimers (PAMAM4-4) were grafted onto the aminolyzed surface with APTES to increase the number of surface functional groups, and heparinization was subsequently performed. The presence of a peak with a wavelength of about 1560 cm-1 in the FTIR spectrum for the sample modified with APTES and dendrimers indicated aminolysis of the surface. The results indicated that the corrosion resistance of the Mg alloy was significantly improved as a result of the formation of a passive layer following the alkali-heat treatment. The results obtained from a potentiodynamic polarization (PDP) test showed that the corrosion current in the uncoated sample decreased from 25 µA to 3.7 µA in the alkali-heat-treated sample. The corrosion current density was reduced by 14 and 50 times in samples treated with the self-assembly molecules, APTES and dendrimers, respectively. After heparinization, the clotting time for pristine Mg was greatly improved. Clotting time increased from 480 s for the pristine Mg sample to 630 s for the APTES- and heparin-modified samples and to 715 s for the PAMAM- and heparin-modified samples. Cell culture data showed a slight improvement in the cell-supporting behavior of the modified samples.

Induction of Resistance Against Plutella xylostella (L.) (Lep.: Plutellidae) by Jasmonic Acid and Mealy Cabbage Aphid Feeding in Brassica napus L.

The diamondback moth, Plutella xylostella (L.), has become the most destructive insect pest of cruciferous plants, such as B. napus throughout the world including Iran. In this study, the induction of resistance was activated in oilseed rape plants (Brassica napus L.) using foliar application of jasmonic acid (JA) and mealy cabbage aphid either individually or in combination against diamondback moth. Induced resistance by inducers significantly reduced the population growth parameters, as well as the survival rate of immature P. xylostella. Also, the nutritional indices of P. xylostella were studied to evaluate the potential impact of induced resistance on the insect feeding behavior. The values of the efficiency of conversion of ingested food, the efficiency of conversion of digested food, relative consumption rate, and relative growth rate of P. xylostella on JA-treated plants were significantly reduced compared to control. These are because glucosinolates and proteinase inhibitors are induced following treatment of plants. Also, we found a significantly higher glucose oxidase activity in the salivary gland extracts of larvae fed on JA treatment. These results express that JA and/or Aphid application induces systemic defenses in oilseed rape that have a negative effect on P. xylostella fitness. These findings develop our knowledge the effects of induced defenses on P. xylostella.

Evaluation of numerical schemes for capturing shock waves in modeling proppant transport in fractures.

In petroleum engineering, the transport phenomenon of proppants in a fracture caused by hydraulic fracturing is captured by hyperbolic partial differential equations (PDEs). The solution of this kind of PDEs may encounter smooth transitions, or there can be large gradients of the field variables. The numerical challenge posed in a shock situation is that high-order finite difference schemes lead to significant oscillations in the vicinity of shocks despite that such schemes result in higher accuracy in smooth regions. On the other hand, first-order methods provide monotonic solution convergences near the shocks, while giving poorer accuracy in the smooth regions. Accurate numerical simulation of such systems is a challenging task using conventional numerical methods. In this paper, we investigate several shock-capturing schemes. The competency of each scheme was tested against one-dimensional benchmark problems as well as published numerical experiments. The numerical results have shown good performance of high-resolution finite volume methods in capturing shocks by resolving discontinuities while maintaining accuracy in the smooth regions. These methods along with Godunov splitting are applied to model proppant transport in fractures. It is concluded that the proposed scheme produces non-oscillatory and accurate results in obtaining a solution for proppant transport problems.

Functionally graded porous scaffolds made of Ti-based agglomerates.

Mono- and double-layer porous scaffolds were successfully fabricated using ball-milled agglomerates of Ti and Ti-10Nb-3Mo alloy. For selectively controlling the level of porosity and pore size, the agglomerates were sieved into two different size fractions of 100-300µm and 300-500µm. Compressive mechanical properties were measured on a series of cylindrical sintered compacts with different ratios of solid core diameter to porous layer width. The graded porous scaffolds exhibited stress-strain curves typical for metallic foams with a defined plateau region after yielding. The compressive strengths and elastic moduli ranged from 300 to 700MPa and 14 to 55GPa, respectively, depending on the core diameter and the material used. The obtained properties make these materials suitable for load-bearing implant applications.

Cell biological responses of osteoblasts on anodized nanotubular surface of a titanium-zirconium alloy.

Anodization of titanium and its alloys, under controlled conditions, generates a nanotubular architecture on the material surface. The biological consequences of such changes are poorly understood, and therefore, we have analyzed the cellular and molecular responses of osteoblasts that were plated on nanotubular anodized surface of a titanium-zirconium (TiZr) alloy. Upon comparing these results with those obtained on acid etched and polished surfaces of the same alloy, we observed a significant increase in adhesion and proliferation of cells on anodized surfaces as compared to acid etched or polished surface. The expression of genes related to cell adhesion was high only on anodized TiZr, but that of genes related to osteoblast differentiation and osteocalcin protein and extracellular matrix secretion were higher on both anodized and acid etched surfaces. Examination of surface morphology, topography, roughness, surface area and wettability using scanning electron microscopy, atomic force microscopy, and contact angle goniometry, showed that higher surface area, hydrophilicity, and nanoscale roughness of nanotubular TiZr surfaces, which were generated specifically by the anodization process, could strongly enhance the adhesion and proliferation of osteoblasts. We propose that biological properties of known bioactive titanium alloys can be further enhanced by generating nanotubular surfaces using anodization.

Insight into the role of N,N-dimethylaminoethyl methacrylate (DMAEMA) conjugation onto poly(ethylenimine): cell viability and gene transfection studies.

In the present study, the effect of N,N-dimethylaminoethyl methacrylate (DMAEMA) conjugation onto branched poly(ethylenimine) (PEI) with different grafting degree was examined for gene delivery applications. The DMAEMA-grafted-PEI conjugates were characterized and complexed with plasmid DNA (pDNA) at various concentrations, and the physicochemical properties, cell viability, and in vitro transfection efficiency of the complexes were evaluated in HEK 293T cells. Computational techniques were used to analyze the interaction energies and possible binding modes between DNA and conjugates at different grafting degrees. The cytotoxicity analysis and in vitro transfection efficiency of the conjugate/pDNA complexes exhibited a beneficial effect of DMAEMA conjugation when compared to PEI alone. The computational results revealed that the DNA/vector interaction energy decreases with increasing grafting degree, which can be associated to an enhanced release of the pDNA from the carrier once inside cells. The results indicate the significance of DMAEMA conjugation onto PEI as a promising approach for gene delivery applications.

Calcium phosphate-mediated gene delivery using simulated body fluid (SBF).

The present study aimed at developing a new approach in gene delivery of calcium phosphate nanoparticles through simulated body fluid (CaP-SBF). The physicochemical and biological characteristics of the CaP-SBF nanoparticles were compared with those made in pure water (CaP-water) via a similar procedure. The CaP-SBF and CaP-water solutions were then adjusted to two different pH values of 7.4 and 8.0, mixed with plasmid DNA (pDNA), and added in varying amounts to human embryonic kidney (HEK 293T) cells. The transfection efficiency and cell viability were studied in vitro by reporter gene (luciferase and Enhanced Green Fluorescent Protein) expression and the resazurin reduction assay, respectively, 24 and 48 h after the incubation with the nanoparticles. Our results indicated considerably high in vitro transfection efficiency for CaP-SBF/DNA complexes at physiological pH (7.4) with high amounts of CaP. Additionally, the SBF solution exhibited the ability to reduce the rapid growth of CaP particles over time, leading to higher transfection efficiency of CaP-SBF/DNA complexes than those made in water (CaP-water/DNA).

Gene delivery using biodegradable polyelectrolyte microcapsules prepared through the layer-by-layer technique.

Biodegradable and non-biodegradable microcapsules were prepared via the layer-by-layer (LbL) technique consisting of the polyelectrolyte pairs of dextran sulphate/poly-L-arginine and poly(styrene sulfonate)/poly(allylamine hydrochloride), respectively, in an attempt to encapsulate plasmid DNA (pDNA) for efficient transfection into NIH 3T3 cells. Results indicated the retention of bioactivity in the encased pDNA, as well as a correlation between the level of in vitro gene expression and biodegradability properties of polyelectrolyte. Furthermore, the incorporation of iron oxide nanoparticles within the polyelectrolyte layers significantly improved the in vitro transfection efficiency of the microcapsules. As a novel pDNA delivery system, the reported biodegradable microcapsules provide useful insight into plasmid-based vaccination and where there is a prerequisite to deliver genes into cells capable of phagocytosis.

Effect of surface roughness of Ti, Zr, and TiZr on apatite precipitation from simulated body fluid.

Some of the critical properties for a successful orthopedic or dental implant material are its biocompatibility and bioactivity. Pure titanium (Ti) and zirconium (Zr) are widely accepted as biocompatible metals, due to their non-toxicity. While the bioactivity of Ti and some Ti alloys has been extensively investigated, there is still insufficient data for Zr and titanium-zirconium (TiZr) alloys. In the present study, the bioactivity, that is, the apatite forming ability on the alkali and heat treated surfaces of Ti, Zr, and TiZr alloy in simulated body fluid (SBF), was studied. In particular, the effect of the surface roughness characteristics on the bioactivity was evaluated for the first time. The results indicate that the pretreated Ti, Zr and TiZr alloy could form apatite coating on their surfaces. It should be noted that the surface roughness also critically affected the bioactivity of these pretreated metallic samples. A surface morphology with an average roughness of approximately 0.6 microm led to the fastest apatite formation on the metal surfaces. This apatite layer on the metal surface is expected to bond to the surrounding bones directly after implantation.